From: Ian Lance Taylor Date: Fri, 8 Sep 1995 15:30:49 +0000 (+0000) Subject: * Makefile.in (Makefile): Just rebuild Makefile when running X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=824155e843914bf6c1d8269030f9f6442333f065;p=binutils-gdb.git * Makefile.in (Makefile): Just rebuild Makefile when running config.status. (config.h, stamp-h): New targets. * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when rebuilding config.h. * configure: Rebuild. --- diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 60ce6f7e818..c7e22ca7a38 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,5 +1,13 @@ Fri Sep 8 01:07:38 1995 Ian Lance Taylor + * Makefile.in (Makefile): Just rebuild Makefile when running + config.status. + (config.h, stamp-h): New targets. + * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM + earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when + rebuilding config.h. + * configure: Rebuild. + * mips-opc.c: Change unaligned loads and stores with "t,A" operands to use "t,A(b)". diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in index a9be29ca091..e00011cd17b 100644 --- a/opcodes/Makefile.in +++ b/opcodes/Makefile.in @@ -188,8 +188,12 @@ install: $(INSTALL_DATA) $(TARGETLIB) $(libdir)/libopcodes.a $(RANLIB) $(libdir)/libopcodes.a -Makefile: $(srcdir)/Makefile.in config.status - $(SHELL) config.status +Makefile: Makefile.in config.status + CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status + +config.h: stamp-h ; @true +stamp-h: config.in config.status + CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status config.status : configure $(srcdir)/../bfd/configure.host $(srcdir)/../bfd/config.bfd $(SHELL) config.status --recheck diff --git a/opcodes/configure b/opcodes/configure index 8e9d0ea2323..a3839009318 100755 --- a/opcodes/configure +++ b/opcodes/configure @@ -429,6 +429,117 @@ if test -n "$enableval"; then esac fi + + +ac_aux_dir= +for ac_dir in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`" 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`$ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`$ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`$ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`$ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +if test -z "$target" ; then + { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } +fi + # host-specific stuff: . ${srcdir}/../bfd/configure.host @@ -491,25 +602,6 @@ else echo "$ac_t""no" 1>&6 fi -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -578,7 +670,7 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error @@ -592,7 +684,7 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error @@ -625,7 +717,7 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF @@ -654,135 +746,6 @@ fi done -ac_aux_dir= -for ac_dir in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`" 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - - -# Do some error checking and defaulting for the host and target type. -# The inputs are: -# configure --host=HOST --target=TARGET --build=BUILD NONOPT -# -# The rules are: -# 1. You are not allowed to specify --host, --target, and nonopt at the -# same time. -# 2. Host defaults to nonopt. -# 3. If nonopt is not specified, then host defaults to the current host, -# as determined by config.guess. -# 4. Target and build default to nonopt. -# 5. If nonopt is not specified, then target and build default to host. - -# The aliases save the names the user supplied, while $host etc. -# will get canonicalized. -case $host---$target---$nonopt in -NONE---*---* | *---NONE---* | *---*---NONE) ;; -*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; -esac - - -# Make sure we can run config.sub. -if $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`$ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - -echo $ac_n "checking target system type""... $ac_c" 1>&6 - -target_alias=$target -case "$target_alias" in -NONE) - case $nonopt in - NONE) target_alias=$host_alias ;; - *) target_alias=$nonopt ;; - esac ;; -esac - -target=`$ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` -echo "$ac_t""$target" 1>&6 - -echo $ac_n "checking build system type""... $ac_c" 1>&6 - -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac - -build=`$ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 - -test "$host_alias" != "$target_alias" && - test "$program_prefix$program_suffix$program_transform_name" = \ - NONENONEs,x,x, && - program_prefix=${target_alias}- - -if test -z "$target" ; then - { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } -fi -if test -z "$host" ; then - { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; } -fi -if test "$program_transform_name" = s,x,x,; then - program_transform_name= -else - # Double any \ or $. - echo 's,\\,\\\\,g; s,\$,$$,g' > conftestsed - program_transform_name="`echo $program_transform_name|sed -f conftestsed`" - rm -f conftestsed -fi -test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},; $program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" - -# sed with no file args requires a program. -test "$program_transform_name" = "" && program_transform_name="s,x,x," - - # target-specific stuff: # Canonicalize the secondary target names. @@ -885,7 +848,6 @@ fi - trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -989,13 +951,6 @@ s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g -s%@CC@%$CC%g -s%@HDEFINES@%$HDEFINES%g -s%@AR@%$AR%g -s%@RANLIB@%$RANLIB%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@CPP@%$CPP%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -1011,6 +966,13 @@ s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g +s%@CC@%$CC%g +s%@HDEFINES@%$HDEFINES%g +s%@AR@%$AR%g +s%@RANLIB@%$RANLIB%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@CPP@%$CPP%g s%@archdefs@%$archdefs%g s%@BFD_MACHINES@%$BFD_MACHINES%g @@ -1171,7 +1133,7 @@ cat >> $CONFIG_STATUS <<\EOF fi; done - +case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac exit 0 EOF chmod +x $CONFIG_STATUS