From: Luis Machado Date: Fri, 24 Feb 2012 15:08:18 +0000 (+0000) Subject: 2012-02-24 Luis Machado X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=83364271df23ce6c725c739ba1b43a5928e5a048;p=binutils-gdb.git 2012-02-24 Luis Machado * gdb.texinfo (Setting Breakpoints): Mention and explain the condition-evaluation breakpoint parameter. Mention condition-evaluation mode being shown in "info break". (Break Conditions): Add description for target-side conditional breakpoints. (Remote Configuration): Mention conditional-breakpoints-packet. (Packets): Add cond-expr parameter to Z0/Z1 packets and explain cond-expr. (General Query Packets): Mention new ConditionalBreakpoint feature. --- diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 2c16fef8c30..3c13f2436fc 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,15 @@ +2012-02-24 Luis Machado + + * gdb.texinfo (Setting Breakpoints): Mention and explain the + condition-evaluation breakpoint parameter. + Mention condition-evaluation mode being shown in "info break". + (Break Conditions): Add description for target-side + conditional breakpoints. + (Remote Configuration): Mention conditional-breakpoints-packet. + (Packets): Add cond-expr parameter to Z0/Z1 packets and explain + cond-expr. + (General Query Packets): Mention new ConditionalBreakpoint feature. + 2012-02-22 Tom Tromey * gdb.texinfo (Blocks In Python): Clarify block iteration. diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index fe98db0d859..f58f5216f8d 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -3484,12 +3484,17 @@ the appropriate shared library is loaded in the future. @end table @noindent -If a breakpoint is conditional, @code{info break} shows the condition on -the line following the affected breakpoint; breakpoint commands, if any, -are listed after that. A pending breakpoint is allowed to have a condition -specified for it. The condition is not parsed for validity until a shared -library is loaded that allows the pending breakpoint to resolve to a -valid location. +If a breakpoint is conditional, there are two evaluation modes: ``host'' and +``target''. If mode is ``host'', breakpoint condition evaluation is done by +@value{GDBN} on the host's side. If it is ``target'', then the condition +is evaluated by the target. The @code{info break} command shows +the condition on the line following the affected breakpoint, together with +its condition evaluation mode in between parentheses. + +Breakpoint commands, if any, are listed after that. A pending breakpoint is +allowed to have a condition specified for it. The condition is not parsed for +validity until a shared library is loaded that allows the pending +breakpoint to resolve to a valid location. @noindent @code{info break} with a breakpoint @@ -3686,6 +3691,47 @@ controlling the inferior in all-stop mode, @value{GDBN} behaves as if @code{breakpoint always-inserted} mode is off. @end table +@value{GDBN} handles conditional breakpoints by evaluating these conditions +when a breakpoint breaks. If the condition is true, then the process being +debugged stops, otherwise the process is resumed. + +If the target supports evaluating conditions on its end, @value{GDBN} may +download the breakpoint, together with its conditions, to it. + +This feature can be controlled via the following commands: + +@kindex set breakpoint condition-evaluation +@kindex show breakpoint condition-evaluation +@table @code +@item set breakpoint condition-evaluation host +This option commands @value{GDBN} to evaluate the breakpoint +conditions on the host's side. Unconditional breakpoints are sent to +the target which in turn receives the triggers and reports them back to GDB +for condition evaluation. This is the standard evaluation mode. + +@item set breakpoint condition-evaluation target +This option commands @value{GDBN} to download breakpoint conditions +to the target at the moment of their insertion. The target +is responsible for evaluating the conditional expression and reporting +breakpoint stop events back to @value{GDBN} whenever the condition +is true. Due to limitations of target-side evaluation, some conditions +cannot be evaluated there, e.g., conditions that depend on local data +that is only known to the host. Examples include +conditional expressions involving convenience variables, complex types +that cannot be handled by the agent expression parser and expressions +that are too long to be sent over to the target, specially when the +target is a remote system. In these cases, the conditions will be +evaluated by @value{GDBN}. + +@item set breakpoint condition-evaluation auto +This is the default mode. If the target supports evaluating breakpoint +conditions on its end, @value{GDBN} will download breakpoint conditions to +the target (limitations mentioned previously apply). If the target does +not support breakpoint condition evaluation, then @value{GDBN} will fallback +to evaluating all these conditions on the host's side. +@end table + + @cindex negative breakpoint numbers @cindex internal @value{GDBN} breakpoints @value{GDBN} itself sometimes sets breakpoints in your program for @@ -4362,6 +4408,19 @@ conditions for the purpose of performing side effects when a breakpoint is reached (@pxref{Break Commands, ,Breakpoint Command Lists}). +Breakpoint conditions can also be evaluated on the target's side if +the target supports it. Instead of evaluating the conditions locally, +@value{GDBN} encodes the expression into an agent expression +(@pxref{Agent Expressions}) suitable for execution on the target, +independently of @value{GDBN}. Global variables become raw memory +locations, locals become stack accesses, and so forth. + +In this case, @value{GDBN} will only be notified of a breakpoint trigger +when its condition evaluates to true. This mechanism may provide faster +response times depending on the performance characteristics of the target +since it does not need to keep @value{GDBN} informed about +every breakpoint trigger, even those with false conditions. + Break conditions can be specified when a breakpoint is set, by using @samp{if} in the arguments to the @code{break} command. @xref{Set Breaks, ,Setting Breakpoints}. They can also be changed at any time @@ -17500,6 +17559,10 @@ are: @item @code{disable-randomization} @tab @code{QDisableRandomization} @tab @code{set disable-randomization} + +@item @code{conditional-breakpoints-packet} +@tab @code{Z0 and Z1} +@tab @code{Support for target-side breakpoint condition evaluation} @end multitable @node Remote Stub @@ -34247,7 +34310,7 @@ avoid potential problems with duplicate packets, the operations should be implemented in an idempotent way.} @item z0,@var{addr},@var{kind} -@itemx Z0,@var{addr},@var{kind} +@itemx Z0,@var{addr},@var{kind}@r{[};@var{cond_list}@dots{}@r{]} @cindex @samp{z0} packet @cindex @samp{Z0} packet Insert (@samp{Z0}) or remove (@samp{z0}) a memory breakpoint at address @@ -34259,6 +34322,22 @@ A memory breakpoint is implemented by replacing the instruction at the breakpoint in bytes that should be inserted. E.g., the @sc{arm} and @sc{mips} can insert either a 2 or 4 byte breakpoint. Some architectures have additional meanings for @var{kind}; +@var{cond_list} is an optional list of conditional expressions in bytecode +form that should be evaluated on the target's side. These are the +conditions that should be taken into consideration when deciding if +the breakpoint trigger should be reported back to @var{GDBN}. + +The @var{cond_list} parameter is comprised of a series of expressions, +concatenated without separators. Each expression has the following form: + +@table @samp + +@item X @var{len},@var{expr} +@var{len} is the length of the bytecode expression and @var{expr} is the +actual conditional expression in bytecode form. + +@end table + see @ref{Architecture-Specific Protocol Details}. @emph{Implementation note: It is possible for a target to copy or move @@ -34277,7 +34356,7 @@ for an error @end table @item z1,@var{addr},@var{kind} -@itemx Z1,@var{addr},@var{kind} +@itemx Z1,@var{addr},@var{kind}@r{[};@var{cond_list}@dots{}@r{]} @cindex @samp{z1} packet @cindex @samp{Z1} packet Insert (@samp{Z1}) or remove (@samp{z1}) a hardware breakpoint at @@ -34285,7 +34364,7 @@ address @var{addr}. A hardware breakpoint is implemented using a mechanism that is not dependant on being able to modify the target's memory. @var{kind} -has the same meaning as in @samp{Z0} packets. +and @var{cond_list} have the same meaning as in @samp{Z0} packets. @emph{Implementation note: A hardware breakpoint is not affected by code movement.} @@ -35090,6 +35169,11 @@ These are the currently defined stub features and their properties: @tab @samp{-} @tab No +@item @samp{ConditionalBreakpoints} +@tab No +@tab @samp{-} +@tab No + @item @samp{ConditionalTracepoints} @tab No @tab @samp{-} @@ -35227,6 +35311,11 @@ indicated it supports them in its @samp{qSupported} request. The remote stub understands the @samp{qXfer:osdata:read} packet ((@pxref{qXfer osdata read}). +@item ConditionalBreakpoints +The target accepts and implements evaluation of conditional expressions +defined for breakpoints. The target will only report breakpoint triggers +when such conditions are true (@pxref{Conditions, ,Break Conditions}). + @item ConditionalTracepoints The remote stub accepts and implements conditional expressions defined for tracepoints (@pxref{Tracepoint Conditions}).