From: Jagan Teki Date: Wed, 20 Dec 2017 09:53:32 +0000 (+0100) Subject: board: Add SoPine support X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=83d7a37be17420facad04134b61c919e591906f2;p=buildroot.git board: Add SoPine support Add initial support for SoPine board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: TL Lim Cc: Andre Przywara Signed-off-by: Jagan Teki Signed-off-by: Peter Korsgaard --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index a39389c1c3..820a070387 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -171,6 +171,7 @@ pandaboard_defconfig: *defconfig pc_x86_64_bios_defconfig: *defconfig pc_x86_64_efi_defconfig: *defconfig pine64_defconfig: *defconfig +pine64_sopine_defconfig: *defconfig qemu_aarch64_virt_defconfig: *defconfig qemu_arm_versatile_defconfig: *defconfig qemu_arm_versatile_nommu_defconfig: *defconfig diff --git a/DEVELOPERS b/DEVELOPERS index d90c30d007..74dd62fdd8 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -776,6 +776,7 @@ F: board/pine64/ F: configs/bananapi_m1_defconfig F: configs/bananapi_m64_defconfig F: configs/pine64_defconfig +F: configs/pine64_sopine_defconfig F: configs/engicam_imx6qdl_icore_defconfig F: configs/engicam_imx6qdl_icore_qt5_defconfig F: configs/engicam_imx6qdl_icore_rqs_defconfig diff --git a/board/pine64/sopine/boot.cmd b/board/pine64/sopine/boot.cmd new file mode 100644 index 0000000000..2eab642370 --- /dev/null +++ b/board/pine64/sopine/boot.cmd @@ -0,0 +1,6 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r Image +fatload mmc 0 $fdt_addr_r sun50i-a64-sopine-baseboard.dtb + +booti $kernel_addr_r - $fdt_addr_r diff --git a/board/pine64/sopine/genimage.cfg b/board/pine64/sopine/genimage.cfg new file mode 100644 index 0000000000..02ebe7ab9b --- /dev/null +++ b/board/pine64/sopine/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-a64-sopine-baseboard.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8192 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + size = 1M # 1MB - 40K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/pine64/sopine/readme.txt b/board/pine64/sopine/readme.txt new file mode 100644 index 0000000000..08cb380b46 --- /dev/null +++ b/board/pine64/sopine/readme.txt @@ -0,0 +1,38 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the SoPine. With the current configuration +it will bring-up the board, and allow access through the serial console. + +SoPINE link: +https://www.pine64.org/?page_id=1491 + +Wiki link: +https://openedev.amarulasolutions.com/display/ODWIKI/SoPine + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make pine64_sopine_defconfig + + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your SoPine and power it up. The console +is on the serial line, 115200 8N1. diff --git a/configs/pine64_sopine_defconfig b/configs/pine64_sopine_defconfig new file mode 100644 index 0000000000..b076681a98 --- /dev/null +++ b/configs/pine64_sopine_defconfig @@ -0,0 +1,47 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y + +# Linux headers same as kernel, a 4.14 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sopine_baseboard" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/pine64/sopine/boot.cmd" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-sopine-baseboard" + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to PINE64 SOPINE" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/sopine/genimage.cfg"