From: Doug Evans Date: Mon, 2 Feb 2009 23:18:05 +0000 (+0000) Subject: * config/tcl.m4 (SC_PATH_TCLCONFIG): Don't exit 0 if tclconfig fails. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=85541719ae3213788be9e97b855c18e159b2a182;p=binutils-gdb.git * config/tcl.m4 (SC_PATH_TCLCONFIG): Don't exit 0 if tclconfig fails. (SC_PATH_TKCONFIG): Don't exit 0 if tkconfig fails. (SC_LOAD_TCLCONFIG): Quote all uses of TCL_BIN_DIR, it may contain "# no Tcl configs found". (SC_LOAD_TKCONFIG): Similarily for TK_BIN_DIR. * gdb/configure.ac (gdbkt): Check both no_tcl/no_tk first, before doing any further tcl/tk configury. Don't configure gdbtk if tcl or tk check fails. * gdb/aclocal.m4: Regenerate. * gdb/configure: Regenerate. * gdb/gdbtk/plugins/aclocal.m4: Regenerate. * gdb/gdbtk/plugins/configure: Regenerate. --- diff --git a/config/ChangeLog b/config/ChangeLog index e5dfc5185c5..b762abfb804 100644 --- a/config/ChangeLog +++ b/config/ChangeLog @@ -1,3 +1,11 @@ +2009-02-02 Doug Evans + + * tcl.m4 (SC_PATH_TCLCONFIG): Don't exit 0 if tclconfig fails. + (SC_PATH_TKCONFIG): Don't exit 0 if tkconfig fails. + (SC_LOAD_TCLCONFIG): Quote all uses of TCL_BIN_DIR, it may contain + "# no Tcl configs found". + (SC_LOAD_TKCONFIG): Similarily for TK_BIN_DIR. + 2008-11-21 Kai Tietz Fix PR/25502 diff --git a/config/tcl.m4 b/config/tcl.m4 index be0129b1bdf..900a2ceb81e 100644 --- a/config/tcl.m4 +++ b/config/tcl.m4 @@ -114,7 +114,6 @@ AC_DEFUN([SC_PATH_TCLCONFIG], [ if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" AC_MSG_WARN([Can't find Tcl configuration definitions]) - exit 0 else no_tcl= TCL_BIN_DIR=${ac_cv_c_tclconfig} @@ -237,7 +236,6 @@ AC_DEFUN([SC_PATH_TKCONFIG], [ if test x"${ac_cv_c_tkconfig}" = x ; then TK_BIN_DIR="# no Tk configs found" AC_MSG_WARN([Can't find Tk configuration definitions]) - exit 0 else no_tk= TK_BIN_DIR=${ac_cv_c_tkconfig} @@ -285,7 +283,7 @@ AC_DEFUN([SC_LOAD_TCLCONFIG], [ # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC # instead of TCL_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. - if test -f ${TCL_BIN_DIR}/Makefile ; then + if test -f "${TCL_BIN_DIR}/Makefile" ; then TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} @@ -295,7 +293,7 @@ AC_DEFUN([SC_LOAD_TCLCONFIG], [ # against Tcl.framework installed in an arbitary location. case ${TCL_DEFS} in *TCL_FRAMEWORK*) - if test -f ${TCL_BIN_DIR}/${TCL_LIB_FILE}; then + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then for i in "`cd ${TCL_BIN_DIR}; pwd`" \ "`cd ${TCL_BIN_DIR}/../..; pwd`"; do if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then @@ -304,7 +302,7 @@ AC_DEFUN([SC_LOAD_TCLCONFIG], [ fi done fi - if test -f ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}; then + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then TCL_STUB_LIB_SPEC="-L${TCL_BIN_DIR} ${TCL_STUB_LIB_FLAG}" TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" fi @@ -368,7 +366,7 @@ AC_DEFUN([SC_LOAD_TKCONFIG], [ # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC # instead of TK_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. - if test -f ${TK_BIN_DIR}/Makefile ; then + if test -f "${TK_BIN_DIR}/Makefile" ; then TK_LIB_SPEC=${TK_BUILD_LIB_SPEC} TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC} TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH} @@ -378,7 +376,7 @@ AC_DEFUN([SC_LOAD_TKCONFIG], [ # against Tk.framework installed in an arbitary location. case ${TK_DEFS} in *TK_FRAMEWORK*) - if test -f ${TK_BIN_DIR}/${TK_LIB_FILE}; then + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then for i in "`cd ${TK_BIN_DIR}; pwd`" \ "`cd ${TK_BIN_DIR}/../..; pwd`"; do if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then @@ -387,7 +385,7 @@ AC_DEFUN([SC_LOAD_TKCONFIG], [ fi done fi - if test -f ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}; then + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then TK_STUB_LIB_SPEC="-L${TK_BIN_DIR} ${TK_STUB_LIB_FLAG}" TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" fi diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 53059c54edc..2740f3669c6 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,11 @@ +2009-02-02 Doug Evans + + * configure.ac (gdbkt): Check both no_tcl/no_tk first, before + doing any further tcl/tk configury. Don't configure gdbtk if + tcl or tk check fails. + * aclocal.m4: Regenerate. + * configure: Regenerate. + 2009-02-02 Tom Tromey PR exp/9059: diff --git a/gdb/aclocal.m4 b/gdb/aclocal.m4 index e09bb9c73cb..bc533a44758 100644 --- a/gdb/aclocal.m4 +++ b/gdb/aclocal.m4 @@ -468,27 +468,6 @@ AC_DEFUN([AM_PROG_INSTALL_SH], install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering @@ -889,4 +868,7 @@ m4_include([gnulib/m4/onceonly_2_57.m4]) m4_include([gnulib/m4/stdint.m4]) m4_include([gnulib/m4/string_h.m4]) m4_include([gnulib/m4/wchar.m4]) +m4_include([../config/extensions.m4]) +m4_include([../config/lead-dot.m4]) +m4_include([../config/proginstall.m4]) m4_include([acinclude.m4]) diff --git a/gdb/configure b/gdb/configure index ede55046ac0..7579c849d90 100755 --- a/gdb/configure +++ b/gdb/configure @@ -6552,6 +6552,7 @@ am__api_version="1.9" # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then @@ -6585,8 +6586,18 @@ case $as_dir/ in # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done @@ -6595,15 +6606,16 @@ case $as_dir/ in esac done +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi @@ -8538,6 +8550,7 @@ done # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then @@ -8571,8 +8584,18 @@ case $as_dir/ in # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done @@ -8581,15 +8604,16 @@ case $as_dir/ in esac done +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi @@ -19939,7 +19963,6 @@ fi TCL_BIN_DIR="# no Tcl configs found" { echo "$as_me:$LINENO: WARNING: Can't find Tcl configuration definitions" >&5 echo "$as_me: WARNING: Can't find Tcl configuration definitions" >&2;} - exit 0 else no_tcl= TCL_BIN_DIR=${ac_cv_c_tclconfig} @@ -19948,127 +19971,9 @@ echo "${ECHO_T}found ${TCL_BIN_DIR}/tclConfig.sh" >&6 fi fi - if test -z "${no_tcl}"; then - - echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 - - if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - echo "$as_me:$LINENO: result: loading" >&5 -echo "${ECHO_T}loading" >&6 - . ${TCL_BIN_DIR}/tclConfig.sh - else - echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f ${TCL_BIN_DIR}/Makefile ; then - TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} - TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} - TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} - elif test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tcl.framework installed in an arbitary location. - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -f ${TCL_BIN_DIR}/${TCL_LIB_FILE}; then - for i in "`cd ${TCL_BIN_DIR}; pwd`" \ - "`cd ${TCL_BIN_DIR}/../..; pwd`"; do - if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then - TCL_LIB_SPEC="-F`dirname "$i"` -framework ${TCL_LIB_FILE}" - break - fi - done - fi - if test -f ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}; then - TCL_STUB_LIB_SPEC="-L${TCL_BIN_DIR} ${TCL_STUB_LIB_FLAG}" - TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - - - - - - - - - - - - - - # Check for in-tree tcl - here=`pwd` - cd ${srcdir}/.. - topdir=`pwd` - cd ${here} - - intree="no" - if test "${TCL_SRC_DIR}" = "${topdir}/tcl"; then - intree="yes" - fi - - # Find Tcl private headers - if test x"${intree}" = xno; then - - echo "$as_me:$LINENO: checking for Tcl private headers" >&5 -echo $ECHO_N "checking for Tcl private headers... $ECHO_C" >&6 - private_dir="" - dir=`echo ${TCL_INCLUDE_SPEC}/tcl-private/generic | sed -e s/-I//` - if test -f ${dir}/tclInt.h ; then - private_dir=${dir} - fi - - if test x"${private_dir}" = x; then - { { echo "$as_me:$LINENO: error: could not find private Tcl headers" >&5 -echo "$as_me: error: could not find private Tcl headers" >&2;} - { (exit 1); exit 1; }; } - else - TCL_PRIVATE_INCLUDE="-I${private_dir}" - echo "$as_me:$LINENO: result: ${private_dir}" >&5 -echo "${ECHO_T}${private_dir}" >&6 - fi - - TCL_INCLUDE="${TCL_INCLUDE_SPEC} ${TCL_PRIVATE_INCLUDE}" - TCL_LIBRARY="${TCL_LIB_SPEC}" - TCL_DEPS="" - else - # If building tcl in the same src tree, private headers - # are not needed, but we need to be sure to use the right - # headers library - TCL_INCLUDE="-I${TCL_SRC_DIR}/generic" - TCL_LIBRARY="${TCL_BUILD_LIB_SPEC}" - TCL_DEPS="../tcl/${configdir}${TCL_LIB_FILE}" - fi - - - - - # If $no_tk is nonempty, then we can't do Tk, and there is no - # point to doing Tcl. - if test -z "${no_tk}"; then + # If $no_tk is nonempty, then we can't do Tk, and there is no + # point to doing Tcl. # # Ok, lets find the tk configuration @@ -20179,7 +20084,6 @@ fi TK_BIN_DIR="# no Tk configs found" { echo "$as_me:$LINENO: WARNING: Can't find Tk configuration definitions" >&5 echo "$as_me: WARNING: Can't find Tk configuration definitions" >&2;} - exit 0 else no_tk= TK_BIN_DIR=${ac_cv_c_tkconfig} @@ -20189,6 +20093,125 @@ echo "${ECHO_T}found ${TK_BIN_DIR}/tkConfig.sh" >&6 fi + if test -z "${no_tcl}" -a -z "${no_tk}"; then + + echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . ${TCL_BIN_DIR}/tclConfig.sh + else + echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} + TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} + TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd ${TCL_BIN_DIR}; pwd`" \ + "`cd ${TCL_BIN_DIR}/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i"` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L${TCL_BIN_DIR} ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + + + + + + + + + + + + + + + # Check for in-tree tcl + here=`pwd` + cd ${srcdir}/.. + topdir=`pwd` + cd ${here} + + intree="no" + if test "${TCL_SRC_DIR}" = "${topdir}/tcl"; then + intree="yes" + fi + + # Find Tcl private headers + if test x"${intree}" = xno; then + + echo "$as_me:$LINENO: checking for Tcl private headers" >&5 +echo $ECHO_N "checking for Tcl private headers... $ECHO_C" >&6 + private_dir="" + dir=`echo ${TCL_INCLUDE_SPEC}/tcl-private/generic | sed -e s/-I//` + if test -f ${dir}/tclInt.h ; then + private_dir=${dir} + fi + + if test x"${private_dir}" = x; then + { { echo "$as_me:$LINENO: error: could not find private Tcl headers" >&5 +echo "$as_me: error: could not find private Tcl headers" >&2;} + { (exit 1); exit 1; }; } + else + TCL_PRIVATE_INCLUDE="-I${private_dir}" + echo "$as_me:$LINENO: result: ${private_dir}" >&5 +echo "${ECHO_T}${private_dir}" >&6 + fi + + TCL_INCLUDE="${TCL_INCLUDE_SPEC} ${TCL_PRIVATE_INCLUDE}" + TCL_LIBRARY="${TCL_LIB_SPEC}" + TCL_DEPS="" + else + # If building tcl in the same src tree, private headers + # are not needed, but we need to be sure to use the right + # headers library + TCL_INCLUDE="-I${TCL_SRC_DIR}/generic" + TCL_LIBRARY="${TCL_BUILD_LIB_SPEC}" + TCL_DEPS="../tcl/${configdir}${TCL_LIB_FILE}" + fi + + + + + echo "$as_me:$LINENO: checking for existence of ${TK_BIN_DIR}/tkConfig.sh" >&5 echo $ECHO_N "checking for existence of ${TK_BIN_DIR}/tkConfig.sh... $ECHO_C" >&6 @@ -20211,7 +20234,7 @@ echo "${ECHO_T}could not find ${TK_BIN_DIR}/tkConfig.sh" >&6 # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC # instead of TK_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. - if test -f ${TK_BIN_DIR}/Makefile ; then + if test -f "${TK_BIN_DIR}/Makefile" ; then TK_LIB_SPEC=${TK_BUILD_LIB_SPEC} TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC} TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH} @@ -20221,7 +20244,7 @@ echo "${ECHO_T}could not find ${TK_BIN_DIR}/tkConfig.sh" >&6 # against Tk.framework installed in an arbitary location. case ${TK_DEFS} in *TK_FRAMEWORK*) - if test -f ${TK_BIN_DIR}/${TK_LIB_FILE}; then + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then for i in "`cd ${TK_BIN_DIR}; pwd`" \ "`cd ${TK_BIN_DIR}/../..; pwd`"; do if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then @@ -20230,7 +20253,7 @@ echo "${ECHO_T}could not find ${TK_BIN_DIR}/tkConfig.sh" >&6 fi done fi - if test -f ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}; then + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then TK_STUB_LIB_SPEC="-L${TK_BIN_DIR} ${TK_STUB_LIB_FLAG}" TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" fi @@ -20257,14 +20280,14 @@ echo "${ECHO_T}could not find ${TK_BIN_DIR}/tkConfig.sh" >&6 - # Check for in-tree Tk - intree="no" - if test "${TK_SRC_DIR}" = "${topdir}/tk"; then - intree="yes" - fi + # Check for in-tree Tk + intree="no" + if test "${TK_SRC_DIR}" = "${topdir}/tk"; then + intree="yes" + fi - # Find Tk private headers - if test x"${intree}" = xno; then + # Find Tk private headers + if test x"${intree}" = xno; then echo "$as_me:$LINENO: checking for Tk private headers" >&5 echo $ECHO_N "checking for Tk private headers... $ECHO_C" >&6 @@ -20284,50 +20307,49 @@ echo "$as_me: error: could not find Tk private headers" >&2;} echo "${ECHO_T}${private_dir}" >&6 fi - TK_INCLUDE="${TK_INCLUDE_SPEC} ${TK_PRIVATE_INCLUDE}" - TK_LIBRARY=${TK_LIB_SPEC} - TK_DEPS="" - else - TK_INCLUDE="-I${TK_SRC_DIR}/generic" - TK_LIBRARY="${TK_BUILD_LIB_SPEC}" - TK_DEPS="../tk/${configdir}/${TK_LIB_FILE}" - fi + TK_INCLUDE="${TK_INCLUDE_SPEC} ${TK_PRIVATE_INCLUDE}" + TK_LIBRARY=${TK_LIB_SPEC} + TK_DEPS="" + else + TK_INCLUDE="-I${TK_SRC_DIR}/generic" + TK_LIBRARY="${TK_BUILD_LIB_SPEC}" + TK_DEPS="../tk/${configdir}/${TK_LIB_FILE}" + fi - ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)" + ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)" - # Include some libraries that Tcl and Tk want. - TCL_LIBS='$(LIBGUI) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)' - # Yes, the ordering seems wrong here. But it isn't. - # TK_LIBS is the list of libraries that need to be linked - # after Tcl/Tk. Note that this isn't put into LIBS. If it - # were in LIBS then any link tests after this point would - # try to include things like `$(LIBGUI)', which wouldn't work. - GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}" + # Include some libraries that Tcl and Tk want. + TCL_LIBS='$(LIBGUI) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)' + # Yes, the ordering seems wrong here. But it isn't. + # TK_LIBS is the list of libraries that need to be linked + # after Tcl/Tk. Note that this isn't put into LIBS. If it + # were in LIBS then any link tests after this point would + # try to include things like `$(LIBGUI)', which wouldn't work. + GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}" - CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)" - CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)" - CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)" - CONFIG_ALL="${CONFIG_ALL} all-gdbtk" - CONFIG_CLEAN="${CONFIG_CLEAN} clean-gdbtk" - CONFIG_INSTALL="${CONFIG_INSTALL} install-gdbtk" - CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-gdbtk" + CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)" + CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)" + CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)" + CONFIG_ALL="${CONFIG_ALL} all-gdbtk" + CONFIG_CLEAN="${CONFIG_CLEAN} clean-gdbtk" + CONFIG_INSTALL="${CONFIG_INSTALL} install-gdbtk" + CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-gdbtk" - if test x$gdb_cv_os_cygwin = xyes; then - WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32" - WIN32LDAPP="-Wl,--subsystem,console" - CONFIG_OBS="${CONFIG_OBS} gdbres.o" - fi + if test x$gdb_cv_os_cygwin = xyes; then + WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32" + WIN32LDAPP="-Wl,--subsystem,console" + CONFIG_OBS="${CONFIG_OBS} gdbres.o" fi - fi subdirs="$subdirs gdbtk" + fi fi diff --git a/gdb/configure.ac b/gdb/configure.ac index c07eb10a285..3f81ff2b120 100644 --- a/gdb/configure.ac +++ b/gdb/configure.ac @@ -1696,7 +1696,12 @@ if test "${enable_gdbtk}" = "yes"; then cd $here SC_PATH_TCLCONFIG - if test -z "${no_tcl}"; then + + # If $no_tk is nonempty, then we can't do Tk, and there is no + # point to doing Tcl. + SC_PATH_TKCONFIG + + if test -z "${no_tcl}" -a -z "${no_tk}"; then SC_LOAD_TCLCONFIG # Check for in-tree tcl @@ -1728,62 +1733,57 @@ if test "${enable_gdbtk}" = "yes"; then AC_SUBST(TCL_LIBRARY) AC_SUBST(TCL_DEPS) - # If $no_tk is nonempty, then we can't do Tk, and there is no - # point to doing Tcl. - if test -z "${no_tk}"; then - SC_PATH_TKCONFIG - SC_LOAD_TKCONFIG - - # Check for in-tree Tk - intree="no" - if test "${TK_SRC_DIR}" = "${topdir}/tk"; then - intree="yes" - fi - - # Find Tk private headers - if test x"${intree}" = xno; then - CY_AC_TK_PRIVATE_HEADERS - TK_INCLUDE="${TK_INCLUDE_SPEC} ${TK_PRIVATE_INCLUDE}" - TK_LIBRARY=${TK_LIB_SPEC} - TK_DEPS="" - else - TK_INCLUDE="-I${TK_SRC_DIR}/generic" - TK_LIBRARY="${TK_BUILD_LIB_SPEC}" - TK_DEPS="../tk/${configdir}/${TK_LIB_FILE}" - fi - AC_SUBST(TK_INCLUDE) - AC_SUBST(TK_LIBRARY) - AC_SUBST(TK_DEPS) - AC_SUBST(TK_XINCLUDES) - - ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)" - - # Include some libraries that Tcl and Tk want. - TCL_LIBS='$(LIBGUI) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)' - # Yes, the ordering seems wrong here. But it isn't. - # TK_LIBS is the list of libraries that need to be linked - # after Tcl/Tk. Note that this isn't put into LIBS. If it - # were in LIBS then any link tests after this point would - # try to include things like `$(LIBGUI)', which wouldn't work. - GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}" - - CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)" - CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)" - CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)" - CONFIG_ALL="${CONFIG_ALL} all-gdbtk" - CONFIG_CLEAN="${CONFIG_CLEAN} clean-gdbtk" - CONFIG_INSTALL="${CONFIG_INSTALL} install-gdbtk" - CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-gdbtk" - - if test x$gdb_cv_os_cygwin = xyes; then - WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32" - WIN32LDAPP="-Wl,--subsystem,console" - CONFIG_OBS="${CONFIG_OBS} gdbres.o" - fi + SC_LOAD_TKCONFIG + + # Check for in-tree Tk + intree="no" + if test "${TK_SRC_DIR}" = "${topdir}/tk"; then + intree="yes" + fi + + # Find Tk private headers + if test x"${intree}" = xno; then + CY_AC_TK_PRIVATE_HEADERS + TK_INCLUDE="${TK_INCLUDE_SPEC} ${TK_PRIVATE_INCLUDE}" + TK_LIBRARY=${TK_LIB_SPEC} + TK_DEPS="" + else + TK_INCLUDE="-I${TK_SRC_DIR}/generic" + TK_LIBRARY="${TK_BUILD_LIB_SPEC}" + TK_DEPS="../tk/${configdir}/${TK_LIB_FILE}" + fi + AC_SUBST(TK_INCLUDE) + AC_SUBST(TK_LIBRARY) + AC_SUBST(TK_DEPS) + AC_SUBST(TK_XINCLUDES) + + ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)" + + # Include some libraries that Tcl and Tk want. + TCL_LIBS='$(LIBGUI) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)' + # Yes, the ordering seems wrong here. But it isn't. + # TK_LIBS is the list of libraries that need to be linked + # after Tcl/Tk. Note that this isn't put into LIBS. If it + # were in LIBS then any link tests after this point would + # try to include things like `$(LIBGUI)', which wouldn't work. + GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}" + + CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)" + CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)" + CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)" + CONFIG_ALL="${CONFIG_ALL} all-gdbtk" + CONFIG_CLEAN="${CONFIG_CLEAN} clean-gdbtk" + CONFIG_INSTALL="${CONFIG_INSTALL} install-gdbtk" + CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-gdbtk" + + if test x$gdb_cv_os_cygwin = xyes; then + WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32" + WIN32LDAPP="-Wl,--subsystem,console" + CONFIG_OBS="${CONFIG_OBS} gdbres.o" fi - fi - AC_CONFIG_SUBDIRS(gdbtk) + AC_CONFIG_SUBDIRS(gdbtk) + fi fi AC_SUBST(X_CFLAGS)