From: Ilia Mirkin Date: Mon, 4 Feb 2019 04:25:07 +0000 (-0500) Subject: gm107/ir: fix loading z offset for layered 3d image bindings X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=869e32593a9096b845dd6106f8f86e1c41fac968;p=mesa.git gm107/ir: fix loading z offset for layered 3d image bindings Unfortuantely we don't know if a particular load is a real 2d image (as would be a cube face or 2d array element), or a layer of a 3d image. Since we pass in the TIC reference, the instruction's type has to match what's in the TIC (experimentally). In order to properly support bindless images, this also can't be done by looking at the current bindings and generating appropriate code. As a result all plain 2d loads are converted into a pair of 2d/3d loads, with appropriate predicates to ensure only one of those actually executes, and the values are all merged in. This goes somewhat against the current flow, so for GM107 we do the OOB handling directly in the surface processing logic. Perhaps the other gens should do something similar, but that is left to another change. This fixes dEQP tests like image_load_store.3d.*_single_layer and GL-CTS tests like shader_image_load_store.non-layered_binding without breaking anything else. Signed-off-by: Ilia Mirkin Cc: "20.0" --- diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_gm107.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_gm107.cpp index 6eefe8f0025..e244bd0d610 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_gm107.cpp +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_gm107.cpp @@ -122,6 +122,8 @@ private: void emitSAM(); void emitRAM(); + void emitPSETP(); + void emitMOV(); void emitS2R(); void emitCS2R(); @@ -690,6 +692,31 @@ CodeEmitterGM107::emitRAM() * predicate/cc ******************************************************************************/ +void +CodeEmitterGM107::emitPSETP() +{ + + emitInsn(0x50900000); + + switch (insn->op) { + case OP_AND: emitField(0x18, 3, 0); break; + case OP_OR: emitField(0x18, 3, 1); break; + case OP_XOR: emitField(0x18, 3, 2); break; + default: + assert(!"unexpected operation"); + break; + } + + // emitINV (0x2a); + emitPRED(0x27); // TODO: support 3-arg + emitINV (0x20, insn->src(1)); + emitPRED(0x1d, insn->src(1)); + emitINV (0x0f, insn->src(0)); + emitPRED(0x0c, insn->src(0)); + emitPRED(0x03, insn->def(0)); + emitPRED(0x00); +} + /******************************************************************************* * movement / conversion ******************************************************************************/ @@ -3557,7 +3584,12 @@ CodeEmitterGM107::emitInstruction(Instruction *i) case OP_AND: case OP_OR: case OP_XOR: - emitLOP(); + switch (insn->def(0).getFile()) { + case FILE_GPR: emitLOP(); break; + case FILE_PREDICATE: emitPSETP(); break; + default: + assert(!"invalid bool op"); + } break; case OP_NOT: emitNOT(); diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp index 1f702a987d8..a76d6c60cda 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp @@ -1802,6 +1802,9 @@ NVC0LoweringPass::loadSuInfo32(Value *ptr, int slot, uint32_t off, bool bindless { uint32_t base = slot * NVC0_SU_INFO__STRIDE; + // We don't upload surface info for bindless for GM107+ + assert(!bindless || targ->getChipset() < NVISA_GM107_CHIPSET); + if (ptr) { ptr = bld.mkOp2v(OP_ADD, TYPE_U32, bld.getSSA(), ptr, bld.mkImm(slot)); if (bindless) @@ -2204,7 +2207,7 @@ getDestType(const ImgType type) { } void -NVC0LoweringPass::convertSurfaceFormat(TexInstruction *su) +NVC0LoweringPass::convertSurfaceFormat(TexInstruction *su, Instruction **loaded) { const TexInstruction::ImgFormatDesc *format = su->tex.format; int width = format->bits[0] + format->bits[1] + @@ -2223,21 +2226,38 @@ NVC0LoweringPass::convertSurfaceFormat(TexInstruction *su) if (width < 32) untypedDst[0] = bld.getSSA(); - for (int i = 0; i < 4; i++) { - typedDst[i] = su->getDef(i); + if (loaded && loaded[0]) { + for (int i = 0; i < 4; i++) { + if (loaded[i]) + typedDst[i] = loaded[i]->getDef(0); + } + } else { + for (int i = 0; i < 4; i++) { + typedDst[i] = su->getDef(i); + } } // Set the untyped dsts as the su's destinations - for (int i = 0; i < 4; i++) - su->setDef(i, untypedDst[i]); + if (loaded && loaded[0]) { + for (int i = 0; i < 4; i++) + if (loaded[i]) + loaded[i]->setDef(0, untypedDst[i]); + } else { + for (int i = 0; i < 4; i++) + su->setDef(i, untypedDst[i]); - bld.setPosition(su, true); + bld.setPosition(su, true); + } // Unpack each component into the typed dsts int bits = 0; for (int i = 0; i < 4; bits += format->bits[i], i++) { if (!typedDst[i]) continue; + + if (loaded && loaded[0]) + bld.setPosition(loaded[i], true); + if (i >= format->components) { if (format->type == FLOAT || format->type == UNORM || @@ -2308,7 +2328,7 @@ NVC0LoweringPass::handleSurfaceOpNVE4(TexInstruction *su) processSurfaceCoordsNVE4(su); if (su->op == OP_SULDP) { - convertSurfaceFormat(su); + convertSurfaceFormat(su, NULL); insertOOBSurfaceOpResult(su); } @@ -2421,7 +2441,7 @@ NVC0LoweringPass::handleSurfaceOpNVC0(TexInstruction *su) processSurfaceCoordsNVC0(su); if (su->op == OP_SULDP) { - convertSurfaceFormat(su); + convertSurfaceFormat(su, NULL); insertOOBSurfaceOpResult(su); } @@ -2463,14 +2483,16 @@ NVC0LoweringPass::handleSurfaceOpNVC0(TexInstruction *su) } } -void -NVC0LoweringPass::processSurfaceCoordsGM107(TexInstruction *su) +TexInstruction * +NVC0LoweringPass::processSurfaceCoordsGM107(TexInstruction *su, Instruction *ret[4]) { const int slot = su->tex.r; const int dim = su->tex.target.getDim(); - const int arg = dim + (su->tex.target.isArray() || su->tex.target.isCube()); + const bool array = su->tex.target.isArray() || su->tex.target.isCube(); + const int arg = dim + array; Value *ind = su->getIndirectR(); Value *handle; + Instruction *pred = NULL, *pred2d = NULL; int pos = 0; bld.setPosition(su, false); @@ -2489,67 +2511,153 @@ NVC0LoweringPass::processSurfaceCoordsGM107(TexInstruction *su) assert(pos == 0); break; } + + if (dim == 2 && !array) { + // This might be a 2d slice of a 3d texture, try to load the z + // coordinate in. + Value *v; + if (!su->tex.bindless) + v = loadSuInfo32(ind, slot, NVC0_SU_INFO_UNK1C, su->tex.bindless); + else + v = bld.mkOp2v(OP_SHR, TYPE_U32, bld.getSSA(), ind, bld.mkImm(11)); + Value *is_3d = bld.mkOp2v(OP_AND, TYPE_U32, bld.getSSA(), v, bld.mkImm(1)); + pred2d = bld.mkCmp(OP_SET, CC_EQ, TYPE_U32, bld.getSSA(1, FILE_PREDICATE), + TYPE_U32, bld.mkImm(0), is_3d); + + bld.mkOp2(OP_SHR, TYPE_U32, v, v, bld.loadImm(NULL, 16)); + su->moveSources(dim, 1); + su->setSrc(dim, v); + su->tex.target = nv50_ir::TEX_TARGET_3D; + pos++; + } + if (su->tex.bindless) - handle = ind; + handle = bld.mkOp2v(OP_AND, TYPE_U32, bld.getSSA(), ind, bld.mkImm(2047)); else handle = loadTexHandle(ind, slot + 32); + su->setSrc(arg + pos, handle); // The address check doesn't make sense here. The format check could make // sense but it's a bit of a pain. - if (su->tex.bindless) - return; + if (!su->tex.bindless) { + // prevent read fault when the image is not actually bound + pred = + bld.mkCmp(OP_SET, CC_EQ, TYPE_U32, bld.getSSA(1, FILE_PREDICATE), + TYPE_U32, bld.mkImm(0), + loadSuInfo32(ind, slot, NVC0_SU_INFO_ADDR, su->tex.bindless)); + if (su->op != OP_SUSTP && su->tex.format) { + const TexInstruction::ImgFormatDesc *format = su->tex.format; + int blockwidth = format->bits[0] + format->bits[1] + + format->bits[2] + format->bits[3]; + + assert(format->components != 0); + // make sure that the format doesn't mismatch when it's not FMT_NONE + bld.mkCmp(OP_SET_OR, CC_NE, TYPE_U32, pred->getDef(0), + TYPE_U32, bld.loadImm(NULL, blockwidth / 8), + loadSuInfo32(ind, slot, NVC0_SU_INFO_BSIZE, su->tex.bindless), + pred->getDef(0)); + } + } - // prevent read fault when the image is not actually bound - CmpInstruction *pred = - bld.mkCmp(OP_SET, CC_EQ, TYPE_U32, bld.getSSA(1, FILE_PREDICATE), - TYPE_U32, bld.mkImm(0), - loadSuInfo32(ind, slot, NVC0_SU_INFO_ADDR, su->tex.bindless)); - if (su->op != OP_SUSTP && su->tex.format) { - const TexInstruction::ImgFormatDesc *format = su->tex.format; - int blockwidth = format->bits[0] + format->bits[1] + - format->bits[2] + format->bits[3]; + // Now we have "pred" which (optionally) contains whether to do the surface + // op at all, and a "pred2d" which indicates that, in case of doing the + // surface op, we have to create a 2d and 3d version, conditioned on pred2d. + TexInstruction *su2d = NULL; + if (pred2d) { + su2d = cloneForward(func, su)->asTex(); + for (unsigned i = 0; su->defExists(i); ++i) + su2d->setDef(i, bld.getSSA()); + su2d->moveSources(dim + 1, -1); + su2d->tex.target = nv50_ir::TEX_TARGET_2D; + } + if (pred2d && pred) { + Instruction *pred3d = bld.mkOp2(OP_AND, TYPE_U8, + bld.getSSA(1, FILE_PREDICATE), + pred->getDef(0), pred2d->getDef(0)); + pred3d->src(0).mod = Modifier(NV50_IR_MOD_NOT); + pred3d->src(1).mod = Modifier(NV50_IR_MOD_NOT); + su->setPredicate(CC_P, pred3d->getDef(0)); + pred2d = bld.mkOp2(OP_AND, TYPE_U8, bld.getSSA(1, FILE_PREDICATE), + pred->getDef(0), pred2d->getDef(0)); + pred2d->src(0).mod = Modifier(NV50_IR_MOD_NOT); + } else if (pred) { + su->setPredicate(CC_NOT_P, pred->getDef(0)); + } else if (pred2d) { + su->setPredicate(CC_NOT_P, pred2d->getDef(0)); + } + if (su2d) { + su2d->setPredicate(CC_P, pred2d->getDef(0)); + bld.insert(su2d); + + // Create a UNION so that RA assigns the same registers + bld.setPosition(su, true); + for (unsigned i = 0; su->defExists(i); ++i) { + assert(i < 4); - assert(format->components != 0); - // make sure that the format doesn't mismatch when it's not FMT_NONE - bld.mkCmp(OP_SET_OR, CC_NE, TYPE_U32, pred->getDef(0), - TYPE_U32, bld.loadImm(NULL, blockwidth / 8), - loadSuInfo32(ind, slot, NVC0_SU_INFO_BSIZE, su->tex.bindless), - pred->getDef(0)); + ValueDef &def = su->def(i); + ValueDef &def2 = su2d->def(i); + Instruction *mov = NULL; + + if (pred) { + mov = bld.mkMov(bld.getSSA(), bld.loadImm(NULL, 0)); + mov->setPredicate(CC_P, pred->getDef(0)); + } + + Instruction *uni = ret[i] = bld.mkOp2(OP_UNION, TYPE_U32, + bld.getSSA(), + NULL, def2.get()); + def.replace(uni->getDef(0), false); + uni->setSrc(0, def.get()); + if (mov) + uni->setSrc(2, mov->getDef(0)); + } + } else if (pred) { + // Create a UNION so that RA assigns the same registers + bld.setPosition(su, true); + for (unsigned i = 0; su->defExists(i); ++i) { + assert(i < 4); + + ValueDef &def = su->def(i); + + Instruction *mov = bld.mkMov(bld.getSSA(), bld.loadImm(NULL, 0)); + mov->setPredicate(CC_P, pred->getDef(0)); + + Instruction *uni = ret[i] = bld.mkOp2(OP_UNION, TYPE_U32, + bld.getSSA(), + NULL, mov->getDef(0)); + def.replace(uni->getDef(0), false); + uni->setSrc(0, def.get()); + } } - su->setPredicate(CC_NOT_P, pred->getDef(0)); + + return su2d; } void NVC0LoweringPass::handleSurfaceOpGM107(TexInstruction *su) { - processSurfaceCoordsGM107(su); + // processSurfaceCoords also takes care of fixing up the outputs and + // union'ing them with 0 as necessary. Additionally it may create a second + // surface which needs some of the similar fixups. + + Instruction *loaded[4] = {}; + TexInstruction *su2 = processSurfaceCoordsGM107(su, loaded); if (su->op == OP_SULDP) { - convertSurfaceFormat(su); - insertOOBSurfaceOpResult(su); + convertSurfaceFormat(su, loaded); } if (su->op == OP_SUREDP) { - Value *def = su->getDef(0); - su->op = OP_SUREDB; + } - // There may not be a predicate in the bindless case. - if (su->getPredicate()) { - su->setDef(0, bld.getSSA()); - - bld.setPosition(su, true); - - // make sure to initialize dst value when the atomic operation is not - // performed - Instruction *mov = bld.mkMov(bld.getSSA(), bld.loadImm(NULL, 0)); - - assert(su->cc == CC_NOT_P); - mov->setPredicate(CC_P, su->getPredicate()); - - bld.mkOp2(OP_UNION, TYPE_U32, def, su->getDef(0), mov->getDef(0)); - } + // If we fixed up the type of the regular surface load instruction, we also + // have to fix up the copy. + if (su2) { + su2->op = su->op; + su2->dType = su->dType; + su2->sType = su->sType; } } diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.h b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.h index 0ce2a4b80f8..b4c405a9ea5 100644 --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.h +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.h @@ -171,10 +171,10 @@ private: Value *loadMsInfo32(Value *ptr, uint32_t off); void adjustCoordinatesMS(TexInstruction *); - void processSurfaceCoordsGM107(TexInstruction *); + TexInstruction *processSurfaceCoordsGM107(TexInstruction *, Instruction *[4]); void processSurfaceCoordsNVE4(TexInstruction *); void processSurfaceCoordsNVC0(TexInstruction *); - void convertSurfaceFormat(TexInstruction *); + void convertSurfaceFormat(TexInstruction *, Instruction **); void insertOOBSurfaceOpResult(TexInstruction *); Value *calculateSampleOffset(Value *sampleID); diff --git a/src/gallium/drivers/nouveau/nvc0/nvc0_tex.c b/src/gallium/drivers/nouveau/nvc0/nvc0_tex.c index f62e508258b..4948a8f4cea 100644 --- a/src/gallium/drivers/nouveau/nvc0/nvc0_tex.c +++ b/src/gallium/drivers/nouveau/nvc0/nvc0_tex.c @@ -1433,7 +1433,15 @@ gm107_create_image_handle(struct pipe_context *pipe, nvc0->screen->tic.lock[tic->id / 32] |= 1 << (tic->id % 32); - return 0x100000000ULL | tic->id; + // Compute handle. This will include the TIC as well as some additional + // info regarding the bound 3d surface layer, if applicable. + uint64_t handle = 0x100000000ULL | tic->id; + struct nv04_resource *res = nv04_resource(view->resource); + if (res->base.target == PIPE_TEXTURE_3D) { + handle |= 1 << 11; + handle |= view->u.tex.first_layer << (11 + 16); + } + return handle; fail: FREE(tic);