From: Marcin Niestroj Date: Thu, 29 Oct 2020 19:53:31 +0000 (+0100) Subject: board: add Orangepi Zero Plus support X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=87d9b946a560ea6c5f17e5669fc7b4e20dd9efcf;p=buildroot.git board: add Orangepi Zero Plus support Add initial support for Orangepi Zero Plus board: - U-Boot 2020.10 - Linux 5.7.19 - Default packages from buildroot This patch is based on Orangepi Zero Plus2 board support, so genimage configuration and description is copy pasted. One difference is that newer Linux and U-Boot are selected. Another difference is Ethernet support (Plus) instead of WiFi (Plus2). Signed-off-by: Marcin Niestroj Signed-off-by: Peter Korsgaard --- diff --git a/DEVELOPERS b/DEVELOPERS index 7643722f3c..43cc1b55ae 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1580,7 +1580,9 @@ F: package/ecryptfs-utils/ N: Marcin Niestroj F: board/grinn/ +F: board/orangepi/orangepi-zero-plus/ F: configs/grinn_* +F: configs/orangepi_zero_plus_defconfig F: package/argparse/ F: package/dt-utils/ F: package/easydbus/ diff --git a/board/orangepi/orangepi-zero-plus/boot.cmd b/board/orangepi/orangepi-zero-plus/boot.cmd new file mode 100644 index 0000000000..18c4d521af --- /dev/null +++ b/board/orangepi/orangepi-zero-plus/boot.cmd @@ -0,0 +1,6 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r Image +fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-zero-plus.dtb + +booti $kernel_addr_r - $fdt_addr_r diff --git a/board/orangepi/orangepi-zero-plus/genimage.cfg b/board/orangepi/orangepi-zero-plus/genimage.cfg new file mode 100644 index 0000000000..ec15898ddd --- /dev/null +++ b/board/orangepi/orangepi-zero-plus/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-h5-orangepi-zero-plus.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8192 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + size = 1M # 1MB - 40K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/orangepi/orangepi-zero-plus/readme.txt b/board/orangepi/orangepi-zero-plus/readme.txt new file mode 100644 index 0000000000..5556eae890 --- /dev/null +++ b/board/orangepi/orangepi-zero-plus/readme.txt @@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Orangepi Zero Plus. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Orangepi Zero Plus link: +http://www.orangepi.org/OrangePiZeroPlus/ + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make orangepi_zero_plus_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Orangepi Zero Plus and power it up. The console +is on the serial line, 115200 8N1. diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig new file mode 100644 index 0000000000..cff2788f04 --- /dev/null +++ b/configs/orangepi_zero_plus_defconfig @@ -0,0 +1,51 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y + +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_SYSTEM_DHCP="eth0" + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-plus/boot.cmd" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.19" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero Plus" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-zero-plus/genimage.cfg"