From: Nick Clifton Date: Tue, 28 Apr 1998 22:00:55 +0000 (+0000) Subject: Regernate aclocal.m4 and configure using latest tools (I hope!) X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=8a660fab29fcf0d4424adfc9652486d186266db9;p=binutils-gdb.git Regernate aclocal.m4 and configure using latest tools (I hope!) --- diff --git a/opcodes/.Sanitize b/opcodes/.Sanitize index 99b8f4feba1..3d9cebf0166 100644 --- a/opcodes/.Sanitize +++ b/opcodes/.Sanitize @@ -479,4 +479,29 @@ for i in * ; do fi done +# This must come after all other sanitizations. Re-sanitize the .pot +# file. +if [ -n "${verbose}" ]; then + echo Re-computing files for gettext ... +fi + +if [ -n "${safe}" -a ! -f po/.Recover/POTFILES.in ]; then + if [ -n "${verbose}" ]; then + echo Caching po/POTFILES.in in .Recover... + fi + mv po/POTFILES.in po/.Recover +fi + +'\ls -1 *.[ch] *.in' | sed -e 's,^\./,,' > po/POTFILES.in + +if [ -n "${safe}" -a ! -f po/.Recover/opcodes.pot ]; then + if [ -n "${verbose}" ]; then + echo Caching po/opcodes.pot in .Recover... + fi + mv po/opcodes.pot po/.Recover +fi + +# If this fails, Sanitization must fail. +xgettext -k_ -kN_ -C `cat po/POTFILES.in` -o po/opcodes.pot || exit 1 + # End of file. diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 12def33a104..ae437aff43a 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,5 +1,7 @@ Tue Apr 28 14:12:12 1998 Nick Clifton + * aclocal.m4: Regenerated. + * configure: Regenerated. * Makefile.am (POTFILES): Remove inclusion of BFD_H. * Makefile.in: Rebuild. * po/POTFILES.in: Rebuilt using rule in Makefile.in. diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4 index d38c985efa9..4afdfe555d5 100644 --- a/opcodes/aclocal.m4 +++ b/opcodes/aclocal.m4 @@ -163,17 +163,11 @@ case "$host" in # On SCO OpenServer 5, we need -belf to get full-featured binaries. CFLAGS="$CFLAGS -belf" ;; - -*-*-cygwin32*) - AM_SYS_LIBTOOL_CYGWIN32 - ;; - esac # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) @@ -263,9 +257,7 @@ if test "$ac_cv_prog_gcc" = yes; then ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. -changequote(,)dnl /* | [A-Za-z]:\\*) -changequote([,])dnl test -z "$LD" && LD="$ac_prog" ;; "") @@ -328,7 +320,11 @@ fi]) AC_DEFUN(AM_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, -[if test -z "$NM"; then +[case "$NM" in +/* | [A-Za-z]:\\*) + ac_cv_path_NM="$NM" # Let the user override the test with a path. + ;; +*) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do test -z "$ac_dir" && ac_dir=. @@ -348,20 +344,13 @@ AC_CACHE_VAL(ac_cv_path_NM, done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -else - ac_cv_path_NM="$NM" # Let the user override the test with a path. -fi]) + ;; +esac]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) -# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32 -AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32, -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -AC_CHECK_TOOL(AS, as, false) -]) - # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, diff --git a/opcodes/configure b/opcodes/configure index e06bda9d8c5..0ec183ecf2c 100755 --- a/opcodes/configure +++ b/opcodes/configure @@ -1277,7 +1277,7 @@ echo "configure:1277: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. - /* | [A-Za-z]:\\*) + /* | A-Za-z:\\*) test -z "$LD" && LD="$ac_prog" ;; "") @@ -1350,7 +1350,11 @@ echo "configure:1350: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -z "$NM"; then + case "$NM" in +/* | A-Za-z:\\*) + ac_cv_path_NM="$NM" # Let the user override the test with a path. + ;; +*) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do test -z "$ac_dir" && ac_dir=. @@ -1370,9 +1374,8 @@ else done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -else - ac_cv_path_NM="$NM" # Let the user override the test with a path. -fi + ;; +esac fi NM="$ac_cv_path_NM" @@ -1380,7 +1383,7 @@ echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1384: checking whether ln -s works" >&5 +echo "configure:1387: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1416,8 +1419,8 @@ test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1420 "configure"' > conftest.$ac_ext - if { (eval echo configure:1421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1423 "configure"' > conftest.$ac_ext + if { (eval echo configure:1424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1437,147 +1440,11 @@ case "$host" in # On SCO OpenServer 5, we need -belf to get full-featured binaries. CFLAGS="$CFLAGS -belf" ;; - -*-*-cygwin32*) - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1446: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -DLLTOOL="$ac_cv_prog_DLLTOOL" -if test -n "$DLLTOOL"; then - echo "$ac_t""$DLLTOOL" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -if test -z "$ac_cv_prog_DLLTOOL"; then -if test -n "$ac_tool_prefix"; then - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1477: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL="dlltool" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false" -fi -fi -DLLTOOL="$ac_cv_prog_DLLTOOL" -if test -n "$DLLTOOL"; then - echo "$ac_t""$DLLTOOL" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -else - DLLTOOL="false" -fi -fi - -# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1511: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="${ac_tool_prefix}as" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -if test -z "$ac_cv_prog_AS"; then -if test -n "$ac_tool_prefix"; then - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1542: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="as" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false" -fi -fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -else - AS="false" -fi -fi - - - ;; - esac # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } @@ -1631,7 +1498,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:1635: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:1502: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -1649,19 +1516,19 @@ fi echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6 -echo "configure:1653: checking for Cygwin32 environment" >&5 +echo "configure:1520: checking for Cygwin32 environment" >&5 if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1532: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* am_cv_cygwin32=yes else @@ -1678,19 +1545,19 @@ echo "$ac_t""$am_cv_cygwin32" 1>&6 CYGWIN32= test "$am_cv_cygwin32" = yes && CYGWIN32=yes echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6 -echo "configure:1682: checking for Mingw32 environment" >&5 +echo "configure:1549: checking for Mingw32 environment" >&5 if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1561: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* am_cv_mingw32=yes else @@ -1709,7 +1576,7 @@ test "$am_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1713: checking for executable suffix" >&5 +echo "configure:1580: checking for executable suffix" >&5 if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1745,7 +1612,7 @@ echo "$ac_t""${am_cv_exeext}" 1>&6 # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1749: checking for $ac_word" >&5 +echo "configure:1616: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1774,7 +1641,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1778: checking for $ac_word" >&5 +echo "configure:1645: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1822,7 +1689,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1826: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1693: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1832,11 +1699,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1856,12 +1723,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1860: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1727: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1865: checking whether we are using GNU C" >&5 +echo "configure:1732: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1870,7 +1737,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1885,7 +1752,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1889: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1756: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1915,7 +1782,7 @@ fi ALL_LINGUAS= echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1919: checking how to run the C preprocessor" >&5 +echo "configure:1786: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1930,13 +1797,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1940: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1807: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -1947,13 +1814,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1824: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -1976,12 +1843,12 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1980: checking for ANSI C header files" >&5 +echo "configure:1847: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1989,7 +1856,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1993: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1860: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2006,7 +1873,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2024,7 +1891,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2045,7 +1912,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -2056,7 +1923,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:2060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then : else @@ -2080,12 +1947,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:2084: checking for working const" >&5 +echo "configure:1951: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -2155,21 +2022,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:2159: checking for inline" >&5 +echo "configure:2026: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -2195,12 +2062,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:2199: checking for off_t" >&5 +echo "configure:2066: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2228,12 +2095,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:2232: checking for size_t" >&5 +echo "configure:2099: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2263,19 +2130,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:2267: checking for working alloca.h" >&5 +echo "configure:2134: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:2279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -2296,12 +2163,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:2300: checking for alloca" >&5 +echo "configure:2167: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -2356,12 +2223,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:2360: checking whether alloca needs Cray hooks" >&5 +echo "configure:2227: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2390: checking for $ac_func" >&5 +echo "configure:2257: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2441,7 +2308,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:2445: checking stack direction for C alloca" >&5 +echo "configure:2312: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2449,7 +2316,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -2493,17 +2360,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2497: checking for $ac_hdr" >&5 +echo "configure:2364: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2507: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2532,12 +2399,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2536: checking for $ac_func" >&5 +echo "configure:2403: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2585,7 +2452,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:2589: checking for working mmap" >&5 +echo "configure:2456: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2593,7 +2460,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2604: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -2761,17 +2628,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2765: checking for $ac_hdr" >&5 +echo "configure:2632: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2642: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2801,12 +2668,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2805: checking for $ac_func" >&5 +echo "configure:2672: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2858,12 +2725,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2862: checking for $ac_func" >&5 +echo "configure:2729: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2920,19 +2787,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2924: checking for LC_MESSAGES" >&5 +echo "configure:2791: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2953,7 +2820,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2957: checking whether NLS is requested" >&5 +echo "configure:2824: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2973,7 +2840,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2977: checking whether included gettext is requested" >&5 +echo "configure:2844: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2992,17 +2859,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2996: checking for libintl.h" >&5 +echo "configure:2863: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2873: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -3019,19 +2886,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:3023: checking for gettext in libc" >&5 +echo "configure:2890: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:3035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -3047,7 +2914,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:3051: checking for bindtextdomain in -lintl" >&5 +echo "configure:2918: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3055,7 +2922,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3082,19 +2949,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:3086: checking for gettext in libintl" >&5 +echo "configure:2953: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -3122,7 +2989,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3126: checking for $ac_word" >&5 +echo "configure:2993: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3156,12 +3023,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3160: checking for $ac_func" >&5 +echo "configure:3027: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3211,7 +3078,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3215: checking for $ac_word" >&5 +echo "configure:3082: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3246,7 +3113,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3250: checking for $ac_word" >&5 +echo "configure:3117: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3278,7 +3145,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -3318,7 +3185,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3322: checking for $ac_word" >&5 +echo "configure:3189: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3352,7 +3219,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3356: checking for $ac_word" >&5 +echo "configure:3223: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3387,7 +3254,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3391: checking for $ac_word" >&5 +echo "configure:3258: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3477,7 +3344,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:3481: checking for catalogs to be installed" >&5 +echo "configure:3348: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -3505,17 +3372,17 @@ echo "configure:3481: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:3509: checking for linux/version.h" >&5 +echo "configure:3376: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3519: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3386: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -3588,17 +3455,17 @@ for ac_hdr in string.h strings.h stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3592: checking for $ac_hdr" >&5 +echo "configure:3459: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3602: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -3640,7 +3507,7 @@ if test $use_cgen = yes ; then # Extract the first word of "guile", so it can be a program name with args. set dummy guile; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3644: checking for $ac_word" >&5 +echo "configure:3511: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_SCHEME'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3974,8 +3841,6 @@ s%@LD@%$LD%g s%@NM@%$NM%g s%@LN_S@%$LN_S%g s%@LIBTOOL@%$LIBTOOL%g -s%@DLLTOOL@%$DLLTOOL%g -s%@AS@%$AS%g s%@MAINT@%$MAINT%g s%@EXEEXT@%$EXEEXT%g s%@CPP@%$CPP%g