From: K. Richard Pixley Date: Mon, 15 Apr 1991 23:41:05 +0000 (+0000) Subject: Now handles multiple host and targets. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=8c32cf6e55a712a64e01a78a9b646a66c67543d2;p=binutils-gdb.git Now handles multiple host and targets. --- diff --git a/ld/Makefile.in b/ld/Makefile.in index 125f46bd687..7f4deb8af4a 100644 --- a/ld/Makefile.in +++ b/ld/Makefile.in @@ -6,6 +6,18 @@ srcdir = . +destdir = /usr/local + +version=`$(srcdir)/../gcc$(subdir)/gcc -dumpversion` +prefix = $(destdir) +bindir = $(prefix)/bin +libdir = $(prefix)/lib +libsubdir = $(libdir)/gcc/$(target)/$(version) + +INSTALL = install -c +INSTALL_PROGRAM = $(INSTALL) +INSTALL_FILE = $(INSTALL) + BASEDIR = ../.. HOSTDIR = ../$(HOST)/ INCLUDE = $(srcdir)/../include-cygnus @@ -159,8 +171,7 @@ release: objdump:objdump.c install: $(PROGS) - rm -f $G960BASE/bin/$(PROGS) - cp $(PROGS) $$G960BASE/bin/gld960c + $(INSTALL_PROGRAM) ld.new $(libsubdir)/ld #----------------------------------------------------------------------------- # 'STANDARD' GNU/960 TARGETS BELOW THIS POINT @@ -216,7 +227,10 @@ make: Makefile: $(srcdir)/Makefile.in $(srcdir)/configure (cd $(srcdir) ; \ - ./configure `if [ "$(srcdir)" != "." ] ; then echo +f; fi` -host=$(host) $(target)) + ./configure +destdir=$(destdir) \ + +norecurse \ + `if [ "$(srcdir)" != "." ] ; then echo +f; fi` \ + $(host) +target=$(target)) ### Local Variables: *** ### mode:fundamental *** diff --git a/ld/configure b/ld/configure index a7adce0ba7d..2c5e423d83c 100755 --- a/ld/configure +++ b/ld/configure @@ -28,17 +28,13 @@ configdirs= # # Shell script to create proper links to machine-dependent files in -# preparation for compiling gcc. -# -# Usage: configure [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET +# preparation for compilation. # # If configure succeeds, it leaves its status in config.status. # If configure fails after disturbing the status quo, # config.status is removed. # -progname=$0 - remove=rm hard_link=ln symbolic_link='ln -s' @@ -50,15 +46,19 @@ symbolic_link='ln -s' # clear some things potentially inherited from environment. ansi= +defaulttargets= destdir= +fatal= hostsubdir= norecurse= removing= srcdir= srctrigger= target= +targets= targetsubdir= template= +verbose= for arg in $*; do @@ -69,12 +69,9 @@ do -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*) destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'` ;; - -forcesubdirs | +f*) + -forcesubdirs | +forcesubdirs | +f) forcesubdirs=${arg} ;; - -host=* | +host=* | +hos=* | +ho=* | +h=*) - host=`echo ${arg} | sed 's/[+-]h[a-z]*=//'` - ;; -languages=* | +languages=* | +language=* | +languag=* \ | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \ | +l=*) @@ -83,6 +80,9 @@ do -gas | +gas | +ga | +g) gas=yes ;; + -help | +h | +help) + fatal=true + ;; -nfp | +nfp | +nf | +n) nfp=yes ;; @@ -92,61 +92,100 @@ do -rm | +rm) removing=${arg} ;; - -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*) - srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'` +# -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*) +# srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'` +# ;; + -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=* | +t=*) + if [ -n "${targets}" ] ; then + forcesubdirs="+forcesubdirs" + fi + + newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`" + targets="${newtargets}" ;; -template=* | +template=*) template=`echo ${arg} | sed 's/[+-]template=//'` ;; + +verbose | +verbos | +verbo | +verb | +ver | +ve | +v) + verbose=${arg} + ;; + -* | +*) + (echo ; + echo "Unrecognized option: \"${arg}\"". ; + echo) 1>&2 + fatal=true + ;; *) -# Allow configure HOST TARGET - if [ -z "${host}" ] ; then host=${target} ; fi - target=${arg} + if [ -n "${hosts}" ] ; then + forcesubdirs="+forcesubdirs" + fi + + newhosts="${hosts} ${arg}" + hosts=${newhosts} ;; esac done +if [ -n "${verbose}" ] ; then + echo `pwd`/configure $* + echo targets=\"${targets}\" +fi + # process host and target only if not rebuilding configure itself or removing. -if [ -z "${template}" -a -z "${removing}" ] -then +if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then # Complain if an arg is missing - if [ -z "${target}" ] - then - echo "Usage: ${progname} [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET" - echo -n "Where HOST and TARGET are something like " - echo "\`vax', \`sun3', \`encore', etc." - if [ -r config.status ] - then - cat config.status - fi - exit 1 + if [ -z "${hosts}" ] ; then + (echo ; + echo "configure: No HOST specified." ; + echo) 2>&1 + fatal=true fi fi -# Default other arg -if [ -z "${host}" ] -then - host=${target} +if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then + (echo "Usage: configure HOST" ; + echo ; + echo "Options: [defaults in brackets]" ; + echo " +ansi configure w/ANSI library. [no ansi lib]" ; + echo " +destdir=MYDIR configure for installation into MYDIR. [/usr/local]" ; + echo " +forcesubdirs configure in subdirectories. [in source directories]" ; + echo " +lang=LANG configure to build LANG. [gcc]" ; + echo " +help print this message. [normal config]" ; + echo " +gas configure the compilers for use with gas. [native as]" ; + echo " +nfp configure the compilers default to soft floating point. [hard float]" ; + echo " +norecurse configure this directory only. [recurse]" ; + echo " +rm remove this configuration. [build a configuration]" ; + echo " +target=TARGET configure for TARGET. [TARGET = HOST]" ; + echo " +template=TEM rebuild configure using TEM. [normal config]" ; + echo ; + echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ; + echo "Asking for more than one \"+target\" implies \"+forcesubdirs\". Any other" ; + echo "options given will apply to all targets.") 1>&2 + + if [ -r config.status ] ; then + cat config.status + fi + + exit 1 fi -#### configure.in files come in here. -# This file is a shell script that supplies the information necessary -# to tailor a template configure script into the configure script -# appropriate for this directory. For more information, check any -# existing configure script. +#### configure.in common parts come in here. +# This file is a shell script fragment that supplies the information +# necessary to tailor a template configure script into the configure +# script appropriate for this directory. For more information, check +# any existing configure script. -srctrigger=ldmain.c +configdirs= +srctrigger=ldversion.c srcname="linker" -files= -links= -### end of configure.in +# per-host: + +## end of common part # are we rebuilding config itself? -if [ -n "${template}" ] -then - if [ ! -r ${template} ] - then +if [ -n "${template}" ] ; then + if [ ! -r ${template} ] ; then echo "Can't find template ${template}." exit 1 fi @@ -158,9 +197,25 @@ then echo "configdirs=" >> configure echo >> configure - if [ -r configure.in ] - then - sed -e "/^####/ r configure.in" ${template} >> configure + if [ -r configure.in ] ; then + if [ -z "`grep '^# per\-host:' configure.in`" ] ; then + echo `pwd`/configure.in has no "per-host:" line. + exit 1 + fi + + if [ -z "`grep '^# per\-target:' configure.in`" ] ; then + echo `pwd`/configure.in has no "per-target:" line. + exit 1 + fi + + sed -e '/^# per\-target:/,$d' configure.in > configure.com + sed -e '1,/^# per\-target:/d' configure.in > configure.tgt + + sed -e '/^#### configure.in common parts/ r configure.com' \ + -e '/^##### / r configure.tgt' \ + ${template} >> configure + + rm -f configure.com configure.tgt configure.hst else echo Warning: no configure.in in `pwd` cat ${template} >> configure @@ -170,26 +225,21 @@ then rm configure.old echo Rebuilt configure in `pwd` - if [ -z "${norecurse}" ] - then - while [ -n "${configdirs}" ] - do + if [ -z "${norecurse}" ] ; then + while [ -n "${configdirs}" ] ; do # set configdir to car of configdirs, configdirs to cdr of configdirs set ${configdirs}; configdir=$1; shift; configdirs=$* - if [ "`echo ${configdir}.*`" != "${configdir}.*" ] - then + if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then targetspecificdirs=${configdir}.* else targetspecificdirs= fi - for i in ${configdir} ${targetspecificdirs} - do - if [ -r $i/configure ] - then + for i in ${configdir} ${targetspecificdirs} ; do + if [ -r $i/configure ] ; then (cd $i ; - configure +template=${template}) + ./configure +template=${template} ${verbose}) else echo No configure script in `pwd`/$i fi @@ -201,257 +251,308 @@ then fi # some sanity checks on configure.in -if [ -z "${srctrigger}" ] -then +if [ -z "${srctrigger}" ] ; then echo srctrigger not set in configure.in. `pwd` not configured. exit 1 fi -# Temporarily, we support only direct subdir builds. -hostsubdir=Host-${host} -targetsubdir=Target-${target} +for host in ${hosts} ; do + # Default other arg + if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then + targets=${host} + defaulttargets=true + fi -if [ -n "${removing}" ] -then - if [ -d "${hostsubdir}/${targetsubdir}" ] - then - rm -rf ${hostsubdir}/${targetsubdir} +#### configure.in per-host parts come in here. +## end of per-target part - if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target-`" ] - then - rm -rf ${hostsubdir} - fi - else - rm -f .gdbinit Makefile config.status ${links} - fi -else - if [ -n "${forcesubdirs}" ] - then - # check for existing status before allowing forced subdirs. - if [ -f Makefile ] - then - echo "Makefile already exists in source directory. `pwd` not configured." - exit 1 - fi - if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi - cd ${hostsubdir} - - if [ ! -d ${targetsubdir} ] ; then mkdir ${targetsubdir} ; fi - cd ${targetsubdir} - - srcdir=../.. - else - # if not subdir builds, then make sure none exist. - if [ -n "`(ls .) 2>&1 | grep Host-`" ] - then - echo "Configured subdirs exist. `pwd` not configured." - exit 1 - fi - fi + for target in ${targets} ; do - # Find the source files, if location was not specified. - if [ -z "${srcdir}" ] - then - srcdirdefaulted=1 - srcdir=. - if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] - then - srcdir=.. + if [ -n "${verbose}" ] ; then + echo " "target=\"${target}\" fi - fi - - if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] - then - if [ -z "${srcdirdefaulted}" ] - then - echo "${progname}: Can't find ${srcname} sources in \`${srcdir}'." 1>&2 + +#### configure.in per-target parts come in here. +## end of per-target part + + # Temporarily, we support only direct subdir builds. + hostsubdir=Host-${host} + targetsubdir=Target-${target} + + if [ -n "${removing}" ] ; then + if [ -d "${hostsubdir}/${targetsubdir}" ] ; then + rm -rf ${hostsubdir}/${targetsubdir} + + if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target-`" ] ; then + rm -rf ${hostsubdir} + fi + else + rm -f Makefile config.status ${links} + fi else - echo "${progname}: Can't find ${srcname} sources in \`.' or \`..'." 1>&2 - fi - exit 1 - fi + if [ -n "${forcesubdirs}" ] ; then + # check for existing status before allowing forced subdirs. + if [ -f Makefile ] ; then + echo "Makefile already exists in source directory. `pwd` not configured." + exit 1 + fi - # Set up the list of links to be made. - # ${links} is the list of link names, and ${files} is the list of names to link to. + if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi + cd ${hostsubdir} - # Make the links. - while [ -n "${files}" ] - do - # set file to car of files, files to cdr of files - set ${files}; file=$1; shift; files=$* - set ${links}; link=$1; shift; links=$* + if [ ! -d ${targetsubdir} ] ; then mkdir ${targetsubdir} ; fi + cd ${targetsubdir} - if [ ! -r ${srcdir}/${file} ] - then - echo "${progname}: cannot create a link \"${link}\"," 1>&2 - echo "since the file \"${file}\" does not exist." 1>&2 - exit 1 - fi + srcdir=../.. + else + # if not subdir builds, then make sure none exist. + if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then + echo "Configured subdirs exist. `pwd` not configured." + exit 1 + fi + fi - ${remove} -f ${link} - rm -f config.status - # Make a symlink if possible, otherwise try a hard link - ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link} + # Find the source files, if location was not specified. + if [ -z "${srcdir}" ] ; then + srcdirdefaulted=1 + srcdir=. + if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then + srcdir=.. + fi + fi - if [ ! -r ${link} ] - then - echo "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2 - exit 1 - fi - echo "Linked \"${link}\" to \"${srcdir}/${file}\"." - done + if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then + if [ -z "${srcdirdefaulted}" ] ; then + echo "${progname}: Can't find ${srcname} sources in \`${srcdir}'." 1>&2 + else + echo "${progname}: Can't find ${srcname} sources in \`.' or \`..'." 1>&2 + fi - # Create a .gdbinit file which runs the one in srcdir - # and tells GDB to look there for source files. + exit 1 + fi - case ${srcdir} in - .) - ;; - *) - echo "dir ." > .gdbinit - echo "dir ${srcdir}" >> .gdbinit - echo "source ${srcdir}/.gdbinit" >> .gdbinit - ;; - esac + # Set up the list of links to be made. + # ${links} is the list of link names, and ${files} is the list of names to link to. - # Install a makefile, and make it set VPATH - # if necessary so that the sources are found. - # Also change its value of srcdir. + # Make the links. + while [ -n "${files}" ] ; do + # set file to car of files, files to cdr of files + set ${files}; file=$1; shift; files=$* + set ${links}; link=$1; shift; links=$* -# FIXME-someday: This business of always writing to .tem and mv back -# is so that I don't screw things up while developing. Once this -# template is stable, these should be optimized. xoxorich. + if [ ! -r ${srcdir}/${file} ] ; then + echo "${progname}: cannot create a link \"${link}\"," 1>&2 + echo "since the file \"${file}\" does not exist." 1>&2 + exit 1 + fi - # Define macro CROSS_COMPILE in compilation if this is a cross-compiler. - if [ "${host}" != "${target}" ] - then - echo "CROSS=-DCROSS_COMPILE" > Makefile - echo "ALL=start.encap" >> Makefile - else - echo "ALL=all.internal" > Makefile - fi + ${remove} -f ${link} + rm -f config.status + # Make a symlink if possible, otherwise try a hard link + ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link} - # set target, host, VPATH - echo "host = ${host}" >> Makefile - echo "target = ${target}" >> Makefile + if [ ! -r ${link} ] ; then + echo "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2 + exit 1 + fi + echo "Linked \"${link}\" to \"${srcdir}/${file}\"." + done - if [ -n "${forcesubdirs}" ] - then - echo "subdir = /${hostsubdir}/${targetsubdir}" >> Makefile - else - echo "subdir =" >> Makefile - fi + # Create a .gdbinit file which runs the one in srcdir + # and tells GDB to look there for source files. + + case ${srcdir} in + .) + ;; + *) + echo "dir ." > .gdbinit + echo "dir ${srcdir}" >> .gdbinit + echo "source ${srcdir}/.gdbinit" >> .gdbinit + ;; + esac + + # Install a makefile, and make it set VPATH + # if necessary so that the sources are found. + # Also change its value of srcdir. + + # FIXME-someday: This business of always writing to .tem and mv back + # is so that I don't screw things up while developing. Once this + # template is stable, these should be optimized. xoxorich. + + # Define macro CROSS_COMPILE in compilation if this is a cross-compiler. + if [ "${host}" != "${target}" ] ; then + echo "CROSS=-DCROSS_COMPILE" > Makefile + echo "ALL=start.encap" >> Makefile + else + echo "ALL=all.internal" > Makefile + fi -# echo "workdir = `pwd`" >> Makefile - echo "VPATH = ${srcdir}" >> Makefile + # set target, host, VPATH + echo "host = ${host}" >> Makefile + echo "target = ${target}" >> Makefile - # add Makefile.in - cat ${srcdir}/Makefile.in >> Makefile + if [ -n "${forcesubdirs}" ] ; then + echo "subdir = /${hostsubdir}/${targetsubdir}" >> Makefile + else + echo "subdir =" >> Makefile + fi - # and shake thoroughly. - host_var_file=hmake-${host} - target_var_file=tmake-${target} + # echo "workdir = `pwd`" >> Makefile + echo "VPATH = ${srcdir}" >> Makefile - # Conditionalize the makefile for this host. - if [ -f ${srcdir}/config/${host_var_file} ] - then - sed -e "/^####/ r ${srcdir}/config/${host_var_file}" Makefile > Makefile.tem - mv Makefile.tem Makefile - fi + # add Makefile.in + cat ${srcdir}/Makefile.in >> Makefile - # Conditionalize the makefile for this target. - if [ -f ${srcdir}/config/${target_var_file} ] - then - sed -e "/^####/ r ${srcdir}/config/${target_var_file}" Makefile > Makefile.tem - mv Makefile.tem Makefile - fi + # and shake thoroughly. + host_var_file=hmake-${host} + target_var_file=tmake-${target} - # set srcdir - sed "s@^srcdir = \.@srcdir = ${srcdir}@" Makefile > Makefile.tem - mv Makefile.tem Makefile + # Conditionalize the makefile for this host. + if [ -f ${srcdir}/config/${host_var_file} ] ; then + sed -e "/^####/ r ${srcdir}/config/${host_var_file}" Makefile > Makefile.tem + mv Makefile.tem Makefile + fi - # set destdir - if [ -n "${destdir}" ] - then - sed "s:^destdir =.*$:destdir = ${destdir}:" Makefile > Makefile.tem - mv Makefile.tem Makefile - fi + # Conditionalize the makefile for this target. + if [ -f ${srcdir}/config/${target_var_file} ] ; then + sed -e "/^####/ r ${srcdir}/config/${target_var_file}" Makefile > Makefile.tem + mv Makefile.tem Makefile + fi - # Remove all formfeeds, since some Makes get confused by them. - sed "s/ //" Makefile >> Makefile.tem - mv Makefile.tem Makefile + # set srcdir + sed "s@^srcdir = \.@srcdir = ${srcdir}@" Makefile > Makefile.tem + mv Makefile.tem Makefile - # reset SUBDIRS - sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile > Makefile.tem - mv Makefile.tem Makefile + # set destdir + if [ -n "${destdir}" ] ; then + sed "s:^destdir =.*$:destdir = ${destdir}:" Makefile > Makefile.tem + mv Makefile.tem Makefile + fi - # reset NONSUBDIRS - sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile > Makefile.tem - mv Makefile.tem Makefile + # Remove all formfeeds, since some Makes get confused by them. + sed "s/ //" Makefile >> Makefile.tem + mv Makefile.tem Makefile - using= - if [ -f ${srcdir}/config/${host_var_file} ] - then - using=" using \"${host_var_file}\"" - fi + # reset SUBDIRS + sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile > Makefile.tem + mv Makefile.tem Makefile - if [ -f ${srcdir}/config/${target_var_file} ] - then - if [ -z "${using}" ] - then - andusing=" using \"${target_var_file}\"" - else - andusing="${using} and \"${target_var_file}\"" - fi - else - andusing=${using} - fi + # reset NONSUBDIRS + sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile > Makefile.tem + mv Makefile.tem Makefile - echo "Created \"Makefile\""${andusing}. + using= + if [ -f ${srcdir}/config/${host_var_file} ] ; then + using=" using \"${host_var_file}\"" + fi - if [ "${host}" = "${target}" ] - then - echo "Links are now set up for use with a ${target}." \ - > config.status -# | tee ${srcdir}/config.status - else - echo "Links are now set up for host ${host} and target ${target}." \ - > config.status -# | tee ${srcdir}/config.status - fi + if [ -f ${srcdir}/config/${target_var_file} ] ; then + if [ -z "${using}" ] ; then + andusing=" using \"${target_var_file}\"" + else + andusing="${using} and \"${target_var_file}\"" + fi + else + andusing=${using} + fi - originaldir=`pwd` - cd ${srcdir} -fi + echo "Created \"Makefile\"" in `pwd`${andusing}. -# If there are subdirectories, then recurse. + if [ "${host}" = "${target}" ] ; then + echo "Links are now set up for use with a ${target}." \ + > config.status + # | tee ${srcdir}/config.status + else + echo "Links are now set up for host ${host} and target ${target}." \ + > config.status + # | tee ${srcdir}/config.status + fi + + originaldir=`pwd` + cd ${srcdir} + fi + done +done -if [ -n "${norecurse}" ] ; then exit 0 ; fi +# If there are subdirectories, then recurse. -while [ -n "${configdirs}" ] -do - # set configdir to car of configdirs, configdirs to cdr of configdirs - set ${configdirs}; configdir=$1; shift; configdirs=$* - - # check for target override - targetspecificdir=${configdir}.${target} - if [ -d ${targetspecificdir} ] - then - configdir=${targetspecificdir} - fi +if [ -n "${norecurse}" -o -z "${configdirs}" ] ; then exit 0 ; fi +# configdirs is not null +for configdir in ${configdirs} ; do echo Configuring ${configdir}... - (cd ${configdir} ; - ./configure ${forcesubdirs} ${removing} +host=${host} ${target}) \ - | sed 's/^/ /' + specifics= + commons= + + if [ -n "${defaulttargets}" ] ; then + for host in ${hosts} ; do + if [ -d ${configdir}.${host} ] ; then + newspecifics="${specifics} ${host}" + specifics=${newspecifics} + else + newcommons="${commons} ${host}" + commons=${newcommons} + fi # if target specific + done # for each host + + if [ -n "${commons}" ] ; then + (cd ${configdir} ; + ./configure ${commons} ${verbose} ${forcesubdirs} ${removing}) \ + | sed 's/^/ /' + fi # if any common hosts + + if [ -n "${specifics}" ] ; then + for host in ${specifics} ; do + echo Configuring target specific directory ${configdir}.${host}... + (cd ${configdir}.${host} ; + ./configure ${host} ${verbose} ${forcesubdirs} ${removing}) \ + | sed 's/^/ /' + done # for host in specifics + fi # if there are any specifics + else + + for target in ${targets} ; do + if [ -d ${configdir}.${target} ] ; then + newspecifics="${specifics} ${target}" + specifics=${newspecifics} + else + newcommons="${commons} +target=${target}" + commons=${newcommons} + fi + + done # check for target specific dir override + + if [ -n "${verbose}" ] ; then + echo " "commons=\"${commons}\" + echo " "specifics=\"${specifics}\" + fi # if verbose + + if [ -n "${commons}" ] ; then + (cd ${configdir} ; + ./configure ${hosts} ${verbose} ${forcesubdirs} ${removing} ${commons}) \ + | sed 's/^/ /' + fi # if any commons + + if [ -n "${specifics}" ] ; then + for target in ${specifics} ; do + echo Configuring target specific directory ${configdir}.${target}... + (cd ${configdir}.${target} ; + ./configure ${hosts} ${verbose} ${forcesubdirs} ${removing} "+target=${target}") \ + | sed 's/^/ /' + done + fi # if any specifics + fi # not default targets done exit 0 # # $Log$ -# Revision 1.4 1991/04/13 02:07:08 rich +# Revision 1.6 1991/04/15 23:41:04 rich +# Now handles multiple host and targets. +# +# Revision 1.4 1991/04/13 02:11:03 rich # Config cut 3. We now almost install a29k. # # Revision 1.3 1991/04/11 02:41:54 rich @@ -460,5 +561,10 @@ exit 0 # # +# +# Local Variables: +# fill-column: 131 +# End: +# # end of configure.template