From: Bill Cox Date: Tue, 17 May 1994 22:06:15 +0000 (+0000) Subject: * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp, X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=8f07e53768abf7f08527ae87079cbd6db95b14dd;p=binutils-gdb.git * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp, lib/gdb.exp: Replace error proc calls with perror. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 823c826bce5..efc64e7dfea 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,8 @@ +Tue May 17 15:04:14 1994 Bill Cox (bill@rtl.cygnus.com) + + * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp, + lib/gdb.exp: Replace error proc calls with perror. + Mon May 16 19:00:50 1994 Stan Shebs (shebs@andros.cygnus.com) * gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the diff --git a/gdb/testsuite/config/mips-gdb.exp b/gdb/testsuite/config/mips-gdb.exp index 95311177e45..3fce30ed865 100644 --- a/gdb/testsuite/config/mips-gdb.exp +++ b/gdb/testsuite/config/mips-gdb.exp @@ -72,8 +72,8 @@ proc gdb_load { arg } { exp_continue } -re "Reading symbols from.*done..*$prompt $" { } - -re "$prompt $" { error "GDB couldn't read file" } - timeout { error "(timeout) read symbol file" ; return } + -re "$prompt $" { perror "GDB couldn't read file" } + timeout { perror "(timeout) read symbol file" ; return } } send "load $arg\n" if $verbose>1 then { @@ -90,12 +90,12 @@ proc gdb_load { arg } { } -re "$prompt $" { if $verbose>1 then { - error "GDB couldn't load." + perror "GDB couldn't load." } } timeout { if $verbose>1 then { - error "Timed out trying to load $arg." + perror "Timed out trying to load $arg." } } } @@ -138,7 +138,7 @@ proc gdb_start { } { expect { -i $shell_id -re "$" { } timeout { - error "(timeout) board did not come up."; return -1 + perror "(timeout) board did not come up."; return -1 } } } @@ -146,7 +146,7 @@ proc gdb_start { } { send -i $shell_id "go 0xbfc00000\n" expect { -i $shell_id -re "$" { } - timeout { error "(timeout) board did not come up."; return -1 } + timeout { perror "(timeout) board did not come up."; return -1 } } verbose "about to exit kermit" exit_remote_shell $shell_id @@ -165,8 +165,8 @@ proc gdb_start { } { send_user "$GDB initialized for cross mode\n\n" } } - -re "$prompt $" { error "GDB never initialized."; return -1 } - timeout { error "(timeout) GDB never initialized."; + -re "$prompt $" { perror "GDB never initialized."; return -1 } + timeout { perror "(timeout) GDB never initialized."; return -1 } } @@ -194,7 +194,7 @@ proc gdb_start { } { } } timeout { - error "Couldn't set MIPS target." + perror "Couldn't set MIPS target." set timeout 10 return -1 } @@ -203,13 +203,13 @@ proc gdb_start { } { } expect_after { - "" { send "\n"; error "Window too small." } - -re "\(y or n\) " { send "n\n"; error "Got interactive prompt." } - buffer_full { error "internal buffer is full." } - eof { error "eof -- pty is hosed." } - timeout { error "timeout." } - "virtual memory exhausted" { error "virtual memory exhausted." } - "Undefined command" { error "send string probably wrong." } + "" { send "\n"; perror "Window too small." } + -re "\(y or n\) " { send "n\n"; perror "Got interactive prompt." } + buffer_full { perror "internal buffer is full." } + eof { perror "eof -- pty is hosed." } + timeout { perror "timeout." } + "virtual memory exhausted" { perror "virtual memory exhausted." } + "Undefined command" { perror "send string probably wrong." } } proc gdb_exit { } { diff --git a/gdb/testsuite/config/udi-gdb.exp b/gdb/testsuite/config/udi-gdb.exp index 000be06b434..5d44efcb383 100644 --- a/gdb/testsuite/config/udi-gdb.exp +++ b/gdb/testsuite/config/udi-gdb.exp @@ -65,14 +65,14 @@ proc gdb_target_udi { } { warning "$expect_out(buffer)" } -re "TIP-ipc ERROR,.*failed:" { - error "$expect_out(buffer)" + perror "$expect_out(buffer)" } -re "A program is being debugged already. Kill it\? \(y or n\)" { send "y\n" exp_continue } timeout { - error "Couldn't set target for UDI." + perror "Couldn't set target for UDI." cleanup exit $exit_status } @@ -119,11 +119,11 @@ proc gdb_start { } { verbose "$GDB initialized for cross mode\n" } -re "$prompt $" { - error "GDB never initialized." + perror "GDB never initialized." return -1 } timeout { - error "(timeout) GDB never initialized." + perror "(timeout) GDB never initialized." return -1 } } diff --git a/gdb/testsuite/config/vx-gdb.exp b/gdb/testsuite/config/vx-gdb.exp index 1267a00dc2b..3f0ed2222b7 100644 --- a/gdb/testsuite/config/vx-gdb.exp +++ b/gdb/testsuite/config/vx-gdb.exp @@ -54,7 +54,7 @@ proc gdb_load { arg } { set result 0 if [vxworks_ld $shell_id $arg]<0 then { - error "Couldn't load $arg" + perror "Couldn't load $arg" return -1 } @@ -78,7 +78,7 @@ proc gdb_start { } { # get a connection to the board set shell_id [ eval $connectmode "$targetname" ] if $shell_id<0 then { - error "Couldn't connect to $targetname." + perror "Couldn't connect to $targetname." return -1 } verbose "Spawn id for remote shell is $shell_id" @@ -94,11 +94,11 @@ proc gdb_start { } { verbose "\nVxWorks has closed the shell" } -i $shell_id eof { - error "(eof) never disconnected from VxWorks shell." + perror "(eof) never disconnected from VxWorks shell." return -1 } -i $shell_id timeout { - error "(timeout) never disconnected from VxWorks shell." + perror "(timeout) never disconnected from VxWorks shell." return -1 } } @@ -123,14 +123,14 @@ proc spawn_vxgdb { } { if {[which $GDB] != 0} then { spawn $GDB $GDBFLAGS } else { - error "$GDB does not exist." + perror "$GDB does not exist." exit 1 } } else { if {[which $GDB] != 0} then { spawn $GDB } else { - error "$GDB does not exist." + perror "$GDB does not exist." exit 1 } } @@ -139,11 +139,11 @@ proc spawn_vxgdb { } { verbose "$GDB initialized for cross mode to Vxworks\n" } -re "$prompt $" { - error "GDB never initialized." + perror "GDB never initialized." return -1 } timeout { - error "(timeout) GDB never initialized." + perror "(timeout) GDB never initialized." return -1 } } @@ -168,11 +168,11 @@ proc spawn_vxgdb { } { verbose "Set target to $targetname" 1 } -re "net_connect: RPC: Program not registered.*$" { - error "Couldn't set GDB to target $targetname." + perror "Couldn't set GDB to target $targetname." exit 1 } timeout { - error "Couldn't set target for vxworks." + perror "Couldn't set target for vxworks." set timeout 10 return -1 } @@ -189,13 +189,13 @@ proc gdb_exit { } { } #expect_after { -# "" { send "\n"; error "Window too small." } -# -re "\(y or n\) " { send "n\n"; error "Got interactive prompt." } -# buffer_full { error "internal buffer is full." } -# eof { error "eof -- pty is hosed." } -# timeout { error "timeout." } -# "virtual memory exhausted" { error "virtual memory exhausted." } -# "Undefined command" { error "send string probably wrong." } +# "" { send "\n"; perror "Window too small." } +# -re "\(y or n\) " { send "n\n"; perror "Got interactive prompt." } +# buffer_full { perror "internal buffer is full." } +# eof { perror "eof -- pty is hosed." } +# timeout { perror "timeout." } +# "virtual memory exhausted" { perror "virtual memory exhausted." } +# "Undefined command" { perror "send string probably wrong." } #} gdb_start diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp index 3bf01d08a1e..cf754f9723e 100644 --- a/gdb/testsuite/lib/gdb.exp +++ b/gdb/testsuite/lib/gdb.exp @@ -33,6 +33,12 @@ if ![info exists GDBFLAGS] then { set GDBFLAGS "" } +# set the prompt if it doesn't exist +global prompt +if ![info exists prompt] then { + set prompt "\[(\]gdb\[)\]" +} + # # gdb_version -- extract and print the version number of gcc # @@ -94,13 +100,13 @@ proc delete_breakpoints {} { } -re "y\r\n$prompt $" {} -re ".*$prompt $" { perror "Delete all breakpoints" ; return } - timeout { error "Delete all breakpoints (timeout)" ; return } + timeout { perror "Delete all breakpoints (timeout)" ; return } } send "info breakpoints\n" expect { -re "No breakpoints or watchpoints..*$prompt $" {} -re ".*$prompt $" { perror "breakpoints not deleted" ; return } - timeout { error "info breakpoints (timeout)" ; return } + timeout { perror "info breakpoints (timeout)" ; return } } } @@ -295,32 +301,12 @@ proc default_gdb_exit {} { # This used to be 1 for unix-gdb.exp set timeout 5 - catch "send \"quit\n\"" result - # If the process has gone away (e.g. gdb dumped core), deal with it. - if [string match "write\[(\]+spawn_id=\[0-9)\]+:" $result] then { - catch "close" - # FIXME: Shouldn't we call "wait" too? - return -1 - } - # FIXME: What is this catch statement doing here? Won't it prevent us - # from getting errors that we'd rather see? - expect { - eof { - verbose "Got EOF from $GDB" 2 - } - timeout { - verbose "Got TIMEOUT from $GDB" 2 - } - -re "The program is running. Quit anyway.*y or n. $" { - send "y\n" - verbose "Killing program being debugged" 2 - } - } + # We used to try to send "quit" to GDB, and wait for it to die. + # Dealing with all the cases and errors got pretty hairy. Just close it, + # that is simpler. + close - # Before this was here sometimes "uit" would get sent to the next GDB - # (assuming this is immediately followed by gdb_start), which would - # cause a loss of syncronization (i.e. all the stuff that swallows a - # prompt would swallow the wrong one). + # Omitting this probably would cause strange timing-dependent failures. wait } @@ -381,7 +367,7 @@ oaded." # This is an attempt to detect a core dump, but seems not to # work. Perhaps we need to match .* followed by eof, in which # expect does not seem to have a way to do that. - error "couldn't load $arg into $GDB (end of file)." + perror "couldn't load $arg into $GDB (end of file)." return -1 } }