From: Andrew Cagney Date: Wed, 25 Aug 2004 14:47:07 +0000 (+0000) Subject: 2004-08-25 Andrew Cagney X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=8fb3e588da490f3506c978264bdb2da01f3b6b51;p=binutils-gdb.git 2004-08-25 Andrew Cagney * infrun.c: Re-indent. Move expression operators to the beginning of the line. Remove long disabled #if 0 code. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 147f8cb24e5..3014c58d971 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,8 @@ +2004-08-25 Andrew Cagney + + * infrun.c: Re-indent. Move expression operators to the beginning + of the line. Remove long disabled #if 0 code. + 2004-08-24 Andrew Cagney * doublest.h (floatformat_ieee_quad): Rename diff --git a/gdb/infrun.c b/gdb/infrun.c index d44dd0d4c91..b0c5eab93a5 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -580,9 +580,9 @@ resume (int step, enum target_signal sig) resume_ptid = RESUME_ALL; /* Default */ - if ((step || singlestep_breakpoints_inserted_p) && - (stepping_past_singlestep_breakpoint - || (!breakpoints_inserted && breakpoint_here_p (read_pc ())))) + if ((step || singlestep_breakpoints_inserted_p) + && (stepping_past_singlestep_breakpoint + || (!breakpoints_inserted && breakpoint_here_p (read_pc ())))) { /* Stepping past a breakpoint without inserting breakpoints. Make sure only the current thread gets to step, so that @@ -592,9 +592,9 @@ resume (int step, enum target_signal sig) resume_ptid = inferior_ptid; } - if ((scheduler_mode == schedlock_on) || - (scheduler_mode == schedlock_step && - (step || singlestep_breakpoints_inserted_p))) + if ((scheduler_mode == schedlock_on) + || (scheduler_mode == schedlock_step + && (step || singlestep_breakpoints_inserted_p))) { /* User-settable 'scheduler' mode requires solo thread resume. */ resume_ptid = inferior_ptid; @@ -649,8 +649,8 @@ prepare_to_proceed (void) /* Make sure we were stopped either at a breakpoint, or because of a Ctrl-C. */ if (wait_status.kind != TARGET_WAITKIND_STOPPED - || (wait_status.value.sig != TARGET_SIGNAL_TRAP && - wait_status.value.sig != TARGET_SIGNAL_INT)) + || (wait_status.value.sig != TARGET_SIGNAL_TRAP + && wait_status.value.sig != TARGET_SIGNAL_INT)) { return 0; } @@ -674,15 +674,15 @@ prepare_to_proceed (void) select_frame (get_current_frame ()); } - /* We return 1 to indicate that there is a breakpoint here, - so we need to step over it before continuing to avoid - hitting it straight away. */ - if (breakpoint_here_p (wait_pc)) - return 1; + /* We return 1 to indicate that there is a breakpoint here, + so we need to step over it before continuing to avoid + hitting it straight away. */ + if (breakpoint_here_p (wait_pc)) + return 1; } return 0; - + } /* Record the pc of the program the last time it stopped. This is @@ -761,7 +761,7 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step) { insert_breakpoints (); /* If we get here there was no call to error() in - insert breakpoints -- so they were inserted. */ + insert breakpoints -- so they were inserted. */ breakpoints_inserted = 1; } @@ -799,7 +799,7 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step) cannot be read unless the inferior is stopped. At that point, we are not guaranteed the inferior is stopped and so the read_pc () call can fail. Setting the prev_pc value here ensures the value is - updated correctly when the inferior is stopped. */ + updated correctly when the inferior is stopped. */ prev_pc = read_pc (); /* Resume inferior. */ @@ -937,7 +937,8 @@ void handle_inferior_event (struct execution_control_state *ecs); static void step_into_function (struct execution_control_state *ecs); static void insert_step_resume_breakpoint (struct frame_info *step_frame, - struct execution_control_state *ecs); + struct execution_control_state + *ecs); static void stop_stepping (struct execution_control_state *ecs); static void prepare_to_wait (struct execution_control_state *ecs); static void keep_going (struct execution_control_state *ecs); @@ -1161,14 +1162,14 @@ adjust_pc_after_break (struct execution_control_state *ecs) affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented by software breakpoints should be handled through the normal breakpoint layer. - + NOTE drow/2004-01-31: On some targets, breakpoints may generate different signals (SIGILL or SIGEMT for instance), but it is less clear where the PC is pointing afterwards. It may not match DECR_PC_AFTER_BREAK. I don't know any specific target that generates these signals at breakpoints (the code has been in GDB since at least 1992) so I can not guess how to handle them here. - + In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS would have the PC after hitting a watchpoint affected by DECR_PC_AFTER_BREAK. I haven't found any target with both of these set @@ -1188,8 +1189,8 @@ adjust_pc_after_break (struct execution_control_state *ecs) if (SOFTWARE_SINGLE_STEP_P ()) { /* When using software single-step, a SIGTRAP can only indicate - an inserted breakpoint. This actually makes things - easier. */ + an inserted breakpoint. This actually makes things + easier. */ if (singlestep_breakpoints_inserted_p) /* When software single stepping, the instruction at [prev_pc] is never a breakpoint, but the instruction following @@ -1205,9 +1206,9 @@ adjust_pc_after_break (struct execution_control_state *ecs) else { /* When using hardware single-step, a SIGTRAP is reported for - both a completed single-step and a software breakpoint. Need - to differentiate between the two as the latter needs - adjusting but the former does not. */ + both a completed single-step and a software breakpoint. Need + to differentiate between the two as the latter needs + adjusting but the former does not. */ if (currently_stepping (ecs)) { if (prev_pc == breakpoint_pc @@ -1245,7 +1246,7 @@ handle_inferior_event (struct execution_control_state *ecs) defined in the file "config/pa/nm-hppah.h", accesses the variable indirectly. Mutter something rude about the HP merge. */ int sw_single_step_trap_p = 0; - int stopped_by_watchpoint = -1; /* Mark as unknown. */ + int stopped_by_watchpoint = -1; /* Mark as unknown. */ /* Cache the last pid/waitstatus. */ target_last_wait_ptid = ecs->ptid; @@ -1313,31 +1314,6 @@ handle_inferior_event (struct execution_control_state *ecs) ui_out_text (uiout, "[New "); ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid)); ui_out_text (uiout, "]\n"); - -#if 0 - /* NOTE: This block is ONLY meant to be invoked in case of a - "thread creation event"! If it is invoked for any other - sort of event (such as a new thread landing on a breakpoint), - the event will be discarded, which is almost certainly - a bad thing! - - To avoid this, the low-level module (eg. target_wait) - should call in_thread_list and add_thread, so that the - new thread is known by the time we get here. */ - - /* We may want to consider not doing a resume here in order - to give the user a chance to play with the new thread. - It might be good to make that a user-settable option. */ - - /* At this point, all threads are stopped (happens - automatically in either the OS or the native code). - Therefore we need to continue all threads in order to - make progress. */ - - target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0); - prepare_to_wait (ecs); - return; -#endif } switch (ecs->ws.kind) @@ -1360,20 +1336,20 @@ handle_inferior_event (struct execution_control_state *ecs) breakpoint_re_set. */ target_terminal_ours_for_output (); /* NOTE: cagney/2003-11-25: Make certain that the target - stack's section table is kept up-to-date. Architectures, - (e.g., PPC64), use the section table to perform - operations such as address => section name and hence - require the table to contain all sections (including - those found in shared libraries). */ + stack's section table is kept up-to-date. Architectures, + (e.g., PPC64), use the section table to perform + operations such as address => section name and hence + require the table to contain all sections (including + those found in shared libraries). */ /* NOTE: cagney/2003-11-25: Pass current_target and not - exec_ops to SOLIB_ADD. This is because current GDB is - only tooled to propagate section_table changes out from - the "current_target" (see target_resize_to_sections), and - not up from the exec stratum. This, of course, isn't - right. "infrun.c" should only interact with the - exec/process stratum, instead relying on the target stack - to propagate relevant changes (stop, section table - changed, ...) up to other layers. */ + exec_ops to SOLIB_ADD. This is because current GDB is + only tooled to propagate section_table changes out from + the "current_target" (see target_resize_to_sections), and + not up from the exec stratum. This, of course, isn't + right. "infrun.c" should only interact with the + exec/process stratum, instead relying on the target stack + to propagate relevant changes (stop, section table + changed, ...) up to other layers. */ SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add); target_terminal_inferior (); @@ -1453,8 +1429,8 @@ handle_inferior_event (struct execution_control_state *ecs) stop_signal = TARGET_SIGNAL_TRAP; /* NOTE drow/2002-12-05: This code should be pushed down into the - target_wait function. Until then following vfork on HP/UX 10.20 - is probably broken by this. Of course, it's broken anyway. */ + target_wait function. Until then following vfork on HP/UX 10.20 + is probably broken by this. Of course, it's broken anyway. */ /* Is this a target which reports multiple exec events per actual call to exec()? (HP-UX using ptrace does, for example.) If so, ignore all but the last one. Just resume the exec'r, and wait @@ -1559,12 +1535,12 @@ handle_inferior_event (struct execution_control_state *ecs) /* We had an event in the inferior, but we are not interested in handling it at this level. The lower layers have already done what needs to be done, if anything. - - One of the possible circumstances for this is when the - inferior produces output for the console. The inferior has - not stopped, and we are ignoring the event. Another possible - circumstance is any event which the lower level knows will be - reported multiple times without an intervening resume. */ + + One of the possible circumstances for this is when the + inferior produces output for the console. The inferior has + not stopped, and we are ignoring the event. Another possible + circumstance is any event which the lower level knows will be + reported multiple times without an intervening resume. */ case TARGET_WAITKIND_IGNORE: prepare_to_wait (ecs); return; @@ -1588,17 +1564,18 @@ handle_inferior_event (struct execution_control_state *ecs) if (stepping_past_singlestep_breakpoint) { - gdb_assert (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p); + gdb_assert (SOFTWARE_SINGLE_STEP_P () + && singlestep_breakpoints_inserted_p); gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid)); gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid)); stepping_past_singlestep_breakpoint = 0; /* We've either finished single-stepping past the single-step - breakpoint, or stopped for some other reason. It would be nice if - we could tell, but we can't reliably. */ + breakpoint, or stopped for some other reason. It would be nice if + we could tell, but we can't reliably. */ if (stop_signal == TARGET_SIGNAL_TRAP) - { + { /* Pull the single step breakpoints out of the target. */ SOFTWARE_SINGLE_STEP (0, 0); singlestep_breakpoints_inserted_p = 0; @@ -1652,66 +1629,66 @@ handle_inferior_event (struct execution_control_state *ecs) } if (thread_hop_needed) - { - int remove_status; + { + int remove_status; - /* Saw a breakpoint, but it was hit by the wrong thread. - Just continue. */ + /* Saw a breakpoint, but it was hit by the wrong thread. + Just continue. */ - if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) - { - /* Pull the single step breakpoints out of the target. */ - SOFTWARE_SINGLE_STEP (0, 0); - singlestep_breakpoints_inserted_p = 0; - } + if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) + { + /* Pull the single step breakpoints out of the target. */ + SOFTWARE_SINGLE_STEP (0, 0); + singlestep_breakpoints_inserted_p = 0; + } - remove_status = remove_breakpoints (); - /* Did we fail to remove breakpoints? If so, try - to set the PC past the bp. (There's at least - one situation in which we can fail to remove - the bp's: On HP-UX's that use ttrace, we can't - change the address space of a vforking child - process until the child exits (well, okay, not - then either :-) or execs. */ - if (remove_status != 0) - { - /* FIXME! This is obviously non-portable! */ - write_pc_pid (stop_pc + 4, ecs->ptid); - /* We need to restart all the threads now, - * unles we're running in scheduler-locked mode. - * Use currently_stepping to determine whether to - * step or continue. - */ - /* FIXME MVS: is there any reason not to call resume()? */ - if (scheduler_mode == schedlock_on) - target_resume (ecs->ptid, - currently_stepping (ecs), TARGET_SIGNAL_0); - else - target_resume (RESUME_ALL, - currently_stepping (ecs), TARGET_SIGNAL_0); - prepare_to_wait (ecs); - return; - } + remove_status = remove_breakpoints (); + /* Did we fail to remove breakpoints? If so, try + to set the PC past the bp. (There's at least + one situation in which we can fail to remove + the bp's: On HP-UX's that use ttrace, we can't + change the address space of a vforking child + process until the child exits (well, okay, not + then either :-) or execs. */ + if (remove_status != 0) + { + /* FIXME! This is obviously non-portable! */ + write_pc_pid (stop_pc + 4, ecs->ptid); + /* We need to restart all the threads now, + * unles we're running in scheduler-locked mode. + * Use currently_stepping to determine whether to + * step or continue. + */ + /* FIXME MVS: is there any reason not to call resume()? */ + if (scheduler_mode == schedlock_on) + target_resume (ecs->ptid, + currently_stepping (ecs), TARGET_SIGNAL_0); else - { /* Single step */ - breakpoints_inserted = 0; - if (!ptid_equal (inferior_ptid, ecs->ptid)) - context_switch (ecs); - ecs->waiton_ptid = ecs->ptid; - ecs->wp = &(ecs->ws); - ecs->another_trap = 1; - - ecs->infwait_state = infwait_thread_hop_state; - keep_going (ecs); - registers_changed (); - return; - } + target_resume (RESUME_ALL, + currently_stepping (ecs), TARGET_SIGNAL_0); + prepare_to_wait (ecs); + return; + } + else + { /* Single step */ + breakpoints_inserted = 0; + if (!ptid_equal (inferior_ptid, ecs->ptid)) + context_switch (ecs); + ecs->waiton_ptid = ecs->ptid; + ecs->wp = &(ecs->ws); + ecs->another_trap = 1; + + ecs->infwait_state = infwait_thread_hop_state; + keep_going (ecs); + registers_changed (); + return; + } } else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) - { - sw_single_step_trap_p = 1; - ecs->random_signal = 0; - } + { + sw_single_step_trap_p = 1; + ecs->random_signal = 0; + } } else ecs->random_signal = 1; @@ -1840,12 +1817,11 @@ handle_inferior_event (struct execution_control_state *ecs) stack. */ if (stop_signal == TARGET_SIGNAL_TRAP - || (breakpoints_inserted && - (stop_signal == TARGET_SIGNAL_ILL - || stop_signal == TARGET_SIGNAL_SEGV - || stop_signal == TARGET_SIGNAL_EMT)) - || stop_soon == STOP_QUIETLY - || stop_soon == STOP_QUIETLY_NO_SIGSTOP) + || (breakpoints_inserted + && (stop_signal == TARGET_SIGNAL_ILL + || stop_signal == TARGET_SIGNAL_SEGV + || stop_signal == TARGET_SIGNAL_EMT)) + || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP) { if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap) { @@ -1881,7 +1857,7 @@ handle_inferior_event (struct execution_control_state *ecs) else { /* See if there is a breakpoint at the current PC. */ - stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, + stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, stopped_by_watchpoint); /* Following in case break condition called a @@ -1890,13 +1866,13 @@ handle_inferior_event (struct execution_control_state *ecs) } /* NOTE: cagney/2003-03-29: These two checks for a random signal - at one stage in the past included checks for an inferior - function call's call dummy's return breakpoint. The original - comment, that went with the test, read: + at one stage in the past included checks for an inferior + function call's call dummy's return breakpoint. The original + comment, that went with the test, read: - ``End of a stack dummy. Some systems (e.g. Sony news) give - another signal besides SIGTRAP, so check here as well as - above.'' + ``End of a stack dummy. Some systems (e.g. Sony news) give + another signal besides SIGTRAP, so check here as well as + above.'' If someone ever tries to get get call dummys on a non-executable stack to work (where the target would stop @@ -1905,9 +1881,9 @@ handle_inferior_event (struct execution_control_state *ecs) enabled when momentary breakpoints were not being used, I suspect that it won't be the case. - NOTE: kettenis/2004-02-05: Indeed such checks don't seem to - be necessary for call dummies on a non-executable stack on - SPARC. */ + NOTE: kettenis/2004-02-05: Indeed such checks don't seem to + be necessary for call dummies on a non-executable stack on + SPARC. */ if (stop_signal == TARGET_SIGNAL_TRAP) ecs->random_signal @@ -2014,13 +1990,7 @@ process_event_stop_test: delete_step_resume_breakpoint (&step_resume_breakpoint); } -#if 0 - /* FIXME - Need to implement nested temporary breakpoints */ - if (step_over_calls > 0) - set_longjmp_resume_breakpoint (jmp_buf_pc, get_current_frame ()); - else -#endif /* 0 */ - set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id); + set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id); ecs->handling_longjmp = 1; /* FIXME */ keep_going (ecs); return; @@ -2029,17 +1999,6 @@ process_event_stop_test: case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE: remove_breakpoints (); breakpoints_inserted = 0; -#if 0 - /* FIXME - Need to implement nested temporary breakpoints */ - if (step_over_calls - && (frame_id_inner (get_frame_id (get_current_frame ()), - step_frame_id))) - { - ecs->another_trap = 1; - keep_going (ecs); - return; - } -#endif /* 0 */ disable_longjmp_breakpoint (); ecs->handling_longjmp = 0; /* FIXME */ if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME) @@ -2125,20 +2084,20 @@ process_event_stop_test: breakpoint_re_set. */ target_terminal_ours_for_output (); /* NOTE: cagney/2003-11-25: Make certain that the target - stack's section table is kept up-to-date. Architectures, - (e.g., PPC64), use the section table to perform - operations such as address => section name and hence - require the table to contain all sections (including - those found in shared libraries). */ + stack's section table is kept up-to-date. Architectures, + (e.g., PPC64), use the section table to perform + operations such as address => section name and hence + require the table to contain all sections (including + those found in shared libraries). */ /* NOTE: cagney/2003-11-25: Pass current_target and not - exec_ops to SOLIB_ADD. This is because current GDB is - only tooled to propagate section_table changes out from - the "current_target" (see target_resize_to_sections), and - not up from the exec stratum. This, of course, isn't - right. "infrun.c" should only interact with the - exec/process stratum, instead relying on the target stack - to propagate relevant changes (stop, section table - changed, ...) up to other layers. */ + exec_ops to SOLIB_ADD. This is because current GDB is + only tooled to propagate section_table changes out from + the "current_target" (see target_resize_to_sections), and + not up from the exec stratum. This, of course, isn't + right. "infrun.c" should only interact with the + exec/process stratum, instead relying on the target stack + to propagate relevant changes (stop, section table + changed, ...) up to other layers. */ SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add); target_terminal_inferior (); @@ -2166,8 +2125,8 @@ process_event_stop_test: the call that caused this catchpoint to trigger. That gives the user a more useful vantage from which to examine their program's state. */ - else if (what.main_action == - BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK) + else if (what.main_action + == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK) { /* ??rehrauer: If I could figure out how to get the right return PC from here, we could just set a temp @@ -2304,20 +2263,19 @@ process_event_stop_test: && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME) { /* The inferior, while doing a "step" or "next", has ended up in - a signal trampoline (either by a signal being delivered or by - the signal handler returning). Just single-step until the - inferior leaves the trampoline (either by calling the handler - or returning). */ + a signal trampoline (either by a signal being delivered or by + the signal handler returning). Just single-step until the + inferior leaves the trampoline (either by calling the handler + or returning). */ keep_going (ecs); return; } - if (frame_id_eq (frame_unwind_id (get_current_frame ()), - step_frame_id)) + if (frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id)) { /* It's a subroutine call. */ CORE_ADDR real_stop_pc; - + if ((step_over_calls == STEP_OVER_NONE) || ((step_range_end == 1) && in_prologue (prev_pc, ecs->stop_func_start))) @@ -2333,25 +2291,25 @@ process_event_stop_test: stop_stepping (ecs); return; } - + #ifdef DEPRECATED_IGNORE_HELPER_CALL /* On MIPS16, a function that returns a floating point value may - call a library helper function to copy the return value to a - floating point register. The DEPRECATED_IGNORE_HELPER_CALL - macro returns non-zero if we should ignore (i.e. step over) - this function call. */ + call a library helper function to copy the return value to a + floating point register. The DEPRECATED_IGNORE_HELPER_CALL + macro returns non-zero if we should ignore (i.e. step over) + this function call. */ /* FIXME: cagney/2004-07-21: These custom ``ignore frame when - stepping'' function attributes (SIGTRAMP_FRAME, - DEPRECATED_IGNORE_HELPER_CALL, SKIP_TRAMPOLINE_CODE, - skip_language_trampoline frame, et.al.) need to be replaced - with generic attributes bound to the frame's function. */ + stepping'' function attributes (SIGTRAMP_FRAME, + DEPRECATED_IGNORE_HELPER_CALL, SKIP_TRAMPOLINE_CODE, + skip_language_trampoline frame, et.al.) need to be replaced + with generic attributes bound to the frame's function. */ if (DEPRECATED_IGNORE_HELPER_CALL (stop_pc)) { /* We're doing a "next", set a breakpoint at callee's return address (the address at which the caller will resume). */ - insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), - ecs); + insert_step_resume_breakpoint (get_prev_frame + (get_current_frame ()), ecs); keep_going (ecs); return; } @@ -2361,23 +2319,23 @@ process_event_stop_test: /* We're doing a "next", set a breakpoint at callee's return address (the address at which the caller will resume). */ - insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), - ecs); + insert_step_resume_breakpoint (get_prev_frame + (get_current_frame ()), ecs); keep_going (ecs); return; } /* If we are in a function call trampoline (a stub between the - calling routine and the real function), locate the real - function. That's what tells us (a) whether we want to step - into it at all, and (b) what prologue we want to run to the - end of, if we do step into it. */ + calling routine and the real function), locate the real + function. That's what tells us (a) whether we want to step + into it at all, and (b) what prologue we want to run to the + end of, if we do step into it. */ real_stop_pc = skip_language_trampoline (stop_pc); if (real_stop_pc == 0) real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc); if (real_stop_pc != 0) ecs->stop_func_start = real_stop_pc; - + if (IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start)) { struct symtab_and_line sr_sal; @@ -2390,19 +2348,19 @@ process_event_stop_test: if (breakpoints_inserted) insert_breakpoints (); - keep_going (ecs); - return; + keep_going (ecs); + return; } /* If we have line number information for the function we are - thinking of stepping into, step into it. + thinking of stepping into, step into it. - If there are several symtabs at that PC (e.g. with include - files), just want to know whether *any* of them have line - numbers. find_pc_line handles this. */ + If there are several symtabs at that PC (e.g. with include + files), just want to know whether *any* of them have line + numbers. find_pc_line handles this. */ { struct symtab_and_line tmp_sal; - + tmp_sal = find_pc_line (ecs->stop_func_start, 0); if (tmp_sal.line != 0) { @@ -2412,8 +2370,8 @@ process_event_stop_test: } /* If we have no line number and the step-stop-if-no-debug is - set, we stop the step so that the user has a chance to switch - in assembly mode. */ + set, we stop the step so that the user has a chance to switch + in assembly mode. */ if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug) { stop_step = 1; @@ -2423,8 +2381,9 @@ process_event_stop_test: } /* Set a breakpoint at callee's return address (the address at - which the caller will resume). */ - insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), ecs); + which the caller will resume). */ + insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), + ecs); keep_going (ecs); return; } @@ -2487,8 +2446,8 @@ process_event_stop_test: { /* Set a breakpoint at callee's return address (the address at which the caller will resume). */ - insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), - ecs); + insert_step_resume_breakpoint (get_prev_frame + (get_current_frame ()), ecs); keep_going (ecs); return; } @@ -2566,15 +2525,15 @@ process_event_stop_test: stackless leaf function. I think the logic should instead look at the unwound frame ID has that should give a more robust indication of what happened. */ - if (step-ID == current-ID) - still stepping in same function; - else if (step-ID == unwind (current-ID)) - stepped into a function; - else - stepped out of a function; - /* Of course this assumes that the frame ID unwind code is robust - and we're willing to introduce frame unwind logic into this - function. Fortunately, those days are nearly upon us. */ + if (step - ID == current - ID) + still stepping in same function; + else if (step - ID == unwind (current - ID)) + stepped into a function; + else + stepped out of a function; + /* Of course this assumes that the frame ID unwind code is robust + and we're willing to introduce frame unwind logic into this + function. Fortunately, those days are nearly upon us. */ #endif { struct frame_id current_frame = get_frame_id (get_current_frame ()); @@ -2627,7 +2586,7 @@ step_into_function (struct execution_control_state *ecs) ``ecs->stop_func_start == stop_pc'' will never succeed. Adjust ecs->stop_func_start to an address at which a breakpoint may be legitimately placed. - + Note: kevinb/2004-01-19: On FR-V, if this adjustment is not made, GDB will enter an infinite loop when stepping through optimized code consisting of VLIW instructions which contain @@ -2637,12 +2596,12 @@ step_into_function (struct execution_control_state *ecs) set, GDB will adjust the breakpoint address to the beginning of the VLIW instruction. Thus, we need to make the corresponding adjustment here when computing the stop address. */ - + if (gdbarch_adjust_breakpoint_address_p (current_gdbarch)) { ecs->stop_func_start = gdbarch_adjust_breakpoint_address (current_gdbarch, - ecs->stop_func_start); + ecs->stop_func_start); } if (ecs->stop_func_start == stop_pc) @@ -3024,8 +2983,8 @@ normal_stop (void) { case PRINT_UNKNOWN: /* FIXME: cagney/2002-12-01: Given that a frame ID does - (or should) carry around the function and does (or - should) use that when doing a frame comparison. */ + (or should) carry around the function and does (or + should) use that when doing a frame comparison. */ if (stop_step && frame_id_eq (step_frame_id, get_frame_id (get_current_frame ()))