From: Ian Romanick <ian.d.romanick@intel.com>
Date: Wed, 3 Aug 2011 22:27:43 +0000 (-0700)
Subject: ir_to_mesa: Implement ir_unop_any using DP4 w/saturate or DP4 w/SLT
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=92ca560d68e8a6b532998707afcf4f60c0ce2806;p=mesa.git

ir_to_mesa: Implement ir_unop_any using DP4 w/saturate or DP4 w/SLT

This is just like the ir_binop_logic_or case.  The operation
ir_unop_any is (a.x || a.y || a.z || a.w).  Logical-or is implemented
using addition (followed by clampling to [0,1]) on values of 0.0 and
1.0.  Replacing the logical-or operators with addition gives (a.x +
a.y + a.z + a.w).  This can be implemented using a dot-product with a
vector of all 1.0.

Previously a SNE instruction was used to clamp the resulting logic
value to [0,1].  In a fragment shader, using a saturate on the
dot-product has the same effect.  Adding the saturate to the
dot-product is free, so (at least) one instruction is saved.

In a vertex shader, using an SLT on the negation of the dot-product
result has the same effect.  Many older shader architectures do not
support the SNE instruction.  It must be emulated using two SLT
instructions and an ADD.  On these architectures, the single SLT saves
two instructions.

Reviewed-by: Eric Anholt <eric@anholt.net>
---

diff --git a/src/mesa/program/ir_to_mesa.cpp b/src/mesa/program/ir_to_mesa.cpp
index 60d498bd9e3..1bd9a2eee1b 100644
--- a/src/mesa/program/ir_to_mesa.cpp
+++ b/src/mesa/program/ir_to_mesa.cpp
@@ -1256,12 +1256,31 @@ ir_to_mesa_visitor::visit(ir_expression *ir)
       }
       break;
 
-   case ir_unop_any:
+   case ir_unop_any: {
       assert(ir->operands[0]->type->is_vector());
-      emit_dp(ir, result_dst, op[0], op[0],
-	      ir->operands[0]->type->vector_elements);
-      emit(ir, OPCODE_SNE, result_dst, result_src, src_reg_for_float(0.0));
+
+      /* After the dot-product, the value will be an integer on the
+       * range [0,4].  Zero stays zero, and positive values become 1.0.
+       */
+      ir_to_mesa_instruction *const dp =
+	 emit_dp(ir, result_dst, op[0], op[0],
+		 ir->operands[0]->type->vector_elements);
+      if (this->prog->Target == GL_FRAGMENT_PROGRAM_ARB) {
+	 /* The clamping to [0,1] can be done for free in the fragment
+	  * shader with a saturate.
+	  */
+	 dp->saturate = true;
+      } else {
+	 /* Negating the result of the dot-product gives values on the range
+	  * [-4, 0].  Zero stays zero, and negative values become 1.0.  This
+	  * is achieved using SLT.
+	  */
+	 src_reg slt_src = result_src;
+	 slt_src.negate = ~slt_src.negate;
+	 emit(ir, OPCODE_SLT, result_dst, slt_src, src_reg_for_float(0.0));
+      }
       break;
+   }
 
    case ir_binop_logic_xor:
       emit(ir, OPCODE_SNE, result_dst, op[0], op[1]);