From: Frank Ch. Eigler Date: Sat, 14 Nov 1998 04:35:47 +0000 (+0000) Subject: * Personal prototype "gx" translation-based JIT engine for M32R. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=92fa45795dc1b8427de0c1e310bbe1bd52d4bd05;p=binutils-gdb.git * Personal prototype "gx" translation-based JIT engine for M32R. [ChangeLog] start-sanitize-gxsim 1998-11-13 Frank Ch. Eigler * configure.in: Added "--enable-sim-gx" option. * configure: Regenerated. end-sanitize-gxsim [common/ChangeLog] 1998-11-13 Frank Ch. Eigler start-sanitize-gxsim * Make-common.im: Build sim-gx.o and sim-gx-run.o. * sim-gx.c: New file: target-independent gx routines. * sim-gx.h: Declarations for gx structs and routines. * sim-gx-run.c: New file: target-independent gx driver. * sim-base.h: Add gx block vector to state struct. end-sanitize-gxsim * aclocal.m4: Add tests for dlopen family. --- diff --git a/sim/.Sanitize b/sim/.Sanitize index 763ee7ca51f..6c39ef092de 100644 --- a/sim/.Sanitize +++ b/sim/.Sanitize @@ -22,6 +22,13 @@ else lose_these_too="${tic80_files} ${lose_these_too}" fi +gxsim_files="m32r-gx" +if ( echo $* | grep keep\-gxsim > /dev/null ) ; then + keep_these_too="${gxsim_files} ${keep_these_too}" +else + lose_these_too="${gxsim_files} ${lose_these_too}" +fi + lose_these_too="${lose_these_too}" # All files listed between the "Things-to-keep:" line and the @@ -90,6 +97,34 @@ else done fi +gxsim_files="configure configure.in ChangeLog" +if ( echo $* | grep keep\-gxsim > /dev/null ) ; then + for i in $gxsim_files ; do + if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Keeping gxsim stuff in $i + fi + fi + done +else + for i in $gxsim_files ; do + if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Removing traces of \"gxsim\" from $i... + fi + cp $i new + sed '/start\-sanitize\-gxsim/,/end-\sanitize\-gxsim/d' < $i > new + if [ -n "${safe}" -a ! -f .Recover/$i ] ; then + if [ -n "${verbose}" ] ; then + echo Caching $i in .Recover... + fi + mv $i .Recover + fi + mv new $i + fi + done +fi + v850_files="configure configure.in ChangeLog" if ( echo $* | grep keep\-v850e > /dev/null ) ; then for i in $v850_files ; do diff --git a/sim/common/.Sanitize b/sim/common/.Sanitize index b468d634c79..e6b50e31b79 100644 --- a/sim/common/.Sanitize +++ b/sim/common/.Sanitize @@ -22,6 +22,13 @@ else lose_these_too="${cygnus_files} ${lose_these_too}" fi +gxsim_files="sim-gx-run.c sim-gx.c sim-gx.h" +if ( echo $* | grep keep\-gxsim > /dev/null ) ; then + keep_these_too="${gxsim_files} ${keep_these_too}" +else + lose_these_too="${gxsim_files} ${lose_these_too}" +fi + # All files listed between the "Things-to-keep:" line and the # "Files-to-sed:" line will be kept. All other files will be removed. # Directories listed in this section will have their own Sanitize @@ -179,4 +186,32 @@ else done fi +gxsim_files="ChangeLog Make-common.in sim-base.h" +if ( echo $* | grep keep\-gxsim > /dev/null ) ; then + for i in $gxsim_files ; do + if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Keeping gxsim stuff in $i + fi + fi + done +else + for i in $gxsim_files ; do + if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Removing traces of \"gxsim\" from $i... + fi + cp $i new + sed '/start\-sanitize\-gxsim/,/end-\sanitize\-gxsim/d' < $i > new + if [ -n "${safe}" -a ! -f .Recover/$i ] ; then + if [ -n "${verbose}" ] ; then + echo Caching $i in .Recover... + fi + mv $i .Recover + fi + mv new $i + fi + done +fi + # End of file. diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index b7e6f2ea4b6..8a334a2437e 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,15 @@ +1998-11-13 Frank Ch. Eigler + +start-sanitize-gxsim + * Make-common.im: Build sim-gx.o and sim-gx-run.o. + * sim-gx.c: New file: target-independent gx routines. + * sim-gx.h: Declarations for gx structs and routines. + * sim-gx-run.c: New file: target-independent gx driver. + * sim-base.h: Add gx block vector to state struct. +end-sanitize-gxsim + * aclocal.m4: Add tests for dlopen family. + * config.in: Regenerated. + Wed Nov 11 14:02:25 1998 Doug Evans * sim-hload.c (sim_load): Pass `prog_name' to sim_load_file, not NULL. diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in index 809160bb1d6..3622bec006b 100644 --- a/sim/common/Make-common.in +++ b/sim/common/Make-common.in @@ -318,6 +318,9 @@ sim-n-core_h = $(srccom)/sim-n-core.h sim-engine_h = $(srccom)/sim-engine.h sim-events_h = $(srccom)/sim-events.h sim-fpu_h = $(srccom)/sim-fpu.h +# start-sanitize-gxsim +sim-gx_h = $(srccom)/sim-gx.h +# end-sanitize-gxsim sim-io_h = $(srccom)/sim-io.h sim-options_h = $(srccom)/sim-options.h sim-break_h = $(srccom)/sim-break.h @@ -383,6 +386,18 @@ sim-fpu.o: $(srccom)/sim-fpu.c $(sim-fpu_h) \ $(SIM_EXTRA_DEPS) $(CC) -c $(srccom)/sim-fpu.c $(ALL_CFLAGS) +# start-sanitize-gxsim +sim-gx.o: $(srccom)/sim-gx.c $(sim_main_headers) \ + $(sim-gx_h) \ + $(SIM_EXTRA_DEPS) + $(CC) -c $(srccom)/sim-gx.c $(ALL_CFLAGS) + +sim-gx-run.o: $(srccom)/sim-gx-run.c $(sim_main_headers) \ + $(sim-gx_h) \ + $(SIM_EXTRA_DEPS) + $(CC) -c $(srccom)/sim-gx-run.c $(ALL_CFLAGS) +# end-sanitize-gxsim + sim-hload.o: $(srccom)/sim-hload.c $(sim-assert_h) \ $(srcroot)/include/remote-sim.h \ $(SIM_EXTRA_DEPS) diff --git a/sim/common/sim-gx-run.c b/sim/common/sim-gx-run.c new file mode 100644 index 00000000000..a4d8865825b --- /dev/null +++ b/sim/common/sim-gx-run.c @@ -0,0 +1,148 @@ +/* GX generic simulator run. + Copyright (C) 1998 Cygnus Solutions. +*/ + +#include "sim-main.h" +#include "sim-assert.h" +#include "sim-gx.h" + +#ifdef HAVE_TIME_H +#include +#endif + + +/* GX implementation of sim_engine_run that works within the + sim_engine setjmp/longjmp framework. */ + + +void +sim_engine_run (SIM_DESC sd, + int next_cpu_nr, + int nr_cpus, /* ignore */ + int siggnal) /* ignore */ +{ + sim_cpu* cpu; + int cont = 1; + int rc; + + SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER); + cpu = STATE_CPU (sd, next_cpu_nr); + + while(cont) + { + sim_gx_block* block; + sim_gx_compiled_block* compiled_block; + sim_gx_function f; + sim_cia cia = CIA_GET(cpu); + int optimized; + int pre_checksum, post_checksum; + + /* find optimized gx block that includes this PC */ + block = sim_gx_block_find(cia); + if(block == NULL) + { + /* start new learning block */ + block = sim_gx_block_create(cia); + } + ASSERT(block != NULL); + + /* pick preferred compiled block */ + if(block->optimized_block != NULL) + { + compiled_block = block->optimized_block; + /* no stats */ + } + else + { + /* test for optimization policy */ + if(tgx_optimize_test(block)) + { + block->opt_compile_count ++; + sim_gx_block_translate(block, 1 /* optimized */); + compiled_block = block->optimized_block; + optimized = 1; + } + else + { + compiled_block = block->learning_block; + optimized = 0; + } + } + ASSERT(compiled_block != NULL); + + /* load & resolve gx function */ + f = sim_gx_compiled_block_f(compiled_block); + + /* XXX: debug + printf("calling into gx function %p, pc=%08lx, opt %d\n", + (void*) f, (unsigned long) cpu->regs.h_pc, optimized); + */ + + /* compute pc_flags checksum */ + if(! optimized) + { + int i; + pre_checksum = 0; + for(i=0; i < block->length / block->divisor; i++) + pre_checksum += block->pc_flags[i]; + } + + /* call into gx function */ + rc = (*f)(& cpu->regs, block->pc_flags, block->callbacks); + + /* compute pc_flags checksum */ + if(! optimized) + { + int i; + post_checksum = 0; + for(i=0; i < block->length / block->divisor; i++) + post_checksum += block->pc_flags[i]; + + if(post_checksum != pre_checksum) /* system changing */ + { + block->learn_last_change = time(NULL); + } + } + + /* XXX: debug + printf("returned from gx function %p, rc=%d, pc=%08lx\n", + (void*) f, rc, (unsigned long) cpu->regs.h_pc); + */ + + switch(rc) + { + case GX_F_YIELD: /* gx block voluntarily gave up control */ + case GX_F_RANGE: /* PC travelled outside this block */ + ; /* continue block dispatch loop */ + break; + + case GX_F_NONPC: /* non-instruction PC in this block */ + if(compiled_block == block->optimized_block) + { + /* sim_io_printf(sd, "NOTE: cancelling premature optimization, GX block %p, PC %08lx\n", + block, (long) cpu->regs.h_pc); */ + sim_gx_compiled_block_dispose(compiled_block); + block->learn_last_change = time(NULL); + block->optimized_block = NULL; + } + else + { + /* learning-mode gx block should not fail this way */ + sim_io_error(sd, "Internal error - GX block cia %08lx NONPC\n", (long) cia); + } + break; + + case GX_F_HALT: /* gx function returning control */ + cont = 0; /* merely exit loop */ + break; + + /* should not happen */ + default: + sim_io_error(sd, "Translation error (bad rc 0x%d in gx block)", rc); + /* NOTREACHED */ + } + + if(sim_events_tick(sd)) + sim_events_process(sd); + } +} diff --git a/sim/common/sim-gx.c b/sim/common/sim-gx.c new file mode 100644 index 00000000000..413739dff13 --- /dev/null +++ b/sim/common/sim-gx.c @@ -0,0 +1,807 @@ +/* GX target-independent functions for block translation. + Copyright (C) 1998 Cygnus Solutions. */ + + +#include "sim-main.h" +#include "sim-assert.h" +#include "sim-gx.h" + +#include "config.h" +#include "cconfig.h" + +/* shared object functions */ +#ifdef HAVE_DLFCN_H +#include +#else +#error "need dlfcn.h" +#endif + +#ifdef HAVE_ERRNO_H +#include +#else +#error "need errno.h" +#endif + +#include +#include +#include +#ifdef HAVE_TIME_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif +#ifdef HAVE_FCNTL_H +#include +#endif +#ifdef HAVE_SYS_STAT_H +#include +#endif + +#include "bfd.h" + + + + +/* Load the object file with given gx block. Return pointer to GX + function or NULL on failure. */ + +sim_gx_function +sim_gx_compiled_block_f(sim_gx_compiled_block* gx) +{ + sim_gx_function f = gx->function_dlhandle; + SIM_DESC sd = current_state; + int rc; + + if(f == NULL) + { + /* compile object */ + if(gx->object_name == NULL && gx->source_name != NULL) + { + char compile_command[2000]; + + gx->object_name = strdup(gx->source_name); + /* turn *.c into *.o */ + gx->object_name[strlen(gx->object_name)]='o'; + + /* compute command string to compile object */ + sprintf(compile_command, + "make -f %s OBJ=%s SRC=%s gx", +#define GX_MAKEFILE "--no-makefile-yet--" + GX_MAKEFILE, + gx->object_name, + gx->source_name); + + rc = system(compile_command); + if(rc != 0) + { + sim_io_error(sd, "Compile error rc %d for GX source %s: %s", + rc, + gx->source_name, + strerror(errno)); + } + } + + /* load object */ + if(gx->object_dlhandle == NULL && gx->object_name != NULL) + { + gx->object_dlhandle = dlopen(gx->object_name, RTLD_NOW); + if(gx->object_dlhandle == NULL) + { + sim_io_error(sd, "Load error for GX object %s: %s", + gx->object_name, + dlerror()); + } + } + + /* locate function */ + if(gx->function_dlhandle == NULL && gx->object_dlhandle != NULL && gx->symbol_name != NULL) + { + f = gx->function_dlhandle = dlsym(gx->object_dlhandle, gx->symbol_name); + if(f == NULL) + { + sim_io_error(sd, "Resolve error for GX object %s symbol %s: %s", + gx->object_name, + gx->symbol_name, + dlerror()); + } + } + } /* f == NULL */ + + return f; +} + + + +/* Forget about given GX block. Remove its source/object; unload it + from memory. */ +void +sim_gx_compiled_block_dispose(sim_gx_compiled_block* gx) +{ + SIM_DESC sd = current_state; + int rc; + + /* forget dl information */ + gx->function_dlhandle = NULL; + + /* unload shared library */ + if(gx->object_dlhandle != NULL) + { + rc = dlclose(gx->object_dlhandle); + if(rc != 0) + { + sim_io_error(sd, "dlclose() error for GX object %s: %s", + gx->object_name, + dlerror()); + } + gx->object_dlhandle = NULL; + } + + /* final gasps */ + zfree(gx->source_name); + zfree(gx->object_name); + zfree(gx->symbol_name); + zfree(gx); +} + + + +/* Translate a piece of the code segment around given PC, in given mode. */ +sim_gx_block* +sim_gx_block_create(sim_cia cia) +{ + sim_gx_block* block; + + /* allocate emtpy block */ + block = zalloc(sizeof(sim_gx_block)); + + /* initialize block bounds, callback struct etc. */ + tgx_block_ctor(block, cia); + + /* create learning mode translation */ + sim_gx_block_translate(block, 0 /* learning mode */); + + /* add block to block list */ + sim_gx_block_add(block); + + return block; +} + + + +/* Write the current block list to the state file */ +void +sim_gx_write_block_list() +{ + int i; + SIM_DESC sd = current_state; + sim_gx_block_list* blocks = STATE_BLOCKS(sd); + FILE* f; + char state_file_name[PATH_MAX]; + char *exec_name; + + /* get base of executable name */ + exec_name = bfd_get_filename(STATE_PROG_BFD(sd)); + if(strrchr(exec_name, '/') != NULL) + exec_name = strrchr(exec_name, '/') + 1; + + /* generate base name */ + sprintf(state_file_name, "%s/%s.gx", + GX_DIR, + exec_name); + + f = fopen(state_file_name, "w"); + if(f == NULL) + { + sim_io_error(sd, "Error: cannot write to state file %s, errno %d", + state_file_name, errno); + } + + fprintf(f, "# This file was automatically generated. Do not edit.\n"); + + /* write block descriptors into state file */ + for(i=0; igx_blocks_used; i++) + { + sim_gx_block* gx = blocks->gx_blocks[i]; + sim_gx_compiled_block* block; + int j; + int age; + + age = time(NULL) - gx->learn_last_change; /* store interval */ + fprintf(f, "BLOCK 0x%lx 0x%lx %u %u\n", gx->origin, gx->length, gx->divisor, age); + fprintf(f, "FLAGS "); + for(j=0; jorigin + gx->length); j++) + { + fprintf(f, "%2x ", gx->pc_flags[j]); + } + fprintf(f, "\n"); + + /* write learning mode names */ + block = gx->learning_block; + fprintf(f, "LEARNING %s %s %s %lu %u\n", + block->source_name, block->object_name, block->symbol_name, + gx->compile_time, gx->opt_compile_count); + + /* write optimized mode names */ + block = gx->optimized_block; + if(block) + fprintf(f, "OPTIMIZED %s %s %s\n", + block->source_name, block->object_name, block->symbol_name); + + /* NB: other fields will be filled in with freshly guessed values */ + } + + (void) fclose(f); +} + + + +void +print_gx_blocks(sim_gx_block_list* blocks, char* where) +{ + printf("print_gx_blocks: %s\n", where); + + if(blocks == NULL) + printf("(null)\n"); + else + { + int i; + printf("size: %d, used: %d\n", + blocks->gx_blocks_size, blocks->gx_blocks_used); + + /* linear search */ + for(i=0; igx_blocks_used; i++) + { + sim_gx_block* gx = blocks->gx_blocks[i]; + printf("block %d: %p\n", i, (void*) gx); + if(gx == NULL) + printf("** NULL!\n"); + else + printf(" begin 0x%08x length 0x%08x [opt %d%s]\n", + (unsigned)gx->origin, (unsigned)gx->length, + gx->opt_compile_count, + (gx->optimized_block ? " loaded" : " discarded")); + } + + } +} + + + +/* Read the current block list from the cache */ +void +sim_gx_read_block_list() +{ + SIM_DESC sd = current_state; + FILE* f; + char state_file_name[PATH_MAX]; + char *exec_name; + + /* check for block */ + if(STATE_PROG_BFD(sd) == NULL) + return; + + /* get base of executable name */ + exec_name = bfd_get_filename(STATE_PROG_BFD(sd)); + if(strrchr(exec_name, '/') != NULL) + exec_name = strrchr(exec_name, '/') + 1; + + /* generate base name */ + sprintf(state_file_name, "%s/%s.gx", + GX_DIR, + exec_name); + + f = fopen(state_file_name, "r"); + if(f == NULL) + { + /* XXX: print warning */ + return; + } + + fscanf(f, "#%*[^\n]\n"); /* swallow # comment line */ + + while(1) + { + unsigned_4 origin, length; + unsigned divisor; + sim_gx_block* gx; + int rc; + sim_gx_compiled_block* block; + unsigned age; + int j; + + rc = fscanf(f, "BLOCK 0x%0lx 0x%lx %u %u\n", & origin, & length, & divisor, & age); + if(rc != 4) /* not all fields matched - assume EOF */ + break; + + gx = zalloc(sizeof(sim_gx_block)); + + /* initialize block bounds, callback struct etc. */ + tgx_block_ctor2(gx, origin, length, divisor); + + /* read flags */ + fscanf(f, "FLAGS"); + for(j=0; jorigin + gx->length); j++) + { + unsigned value; + fscanf(f, "%2x ", & value); + gx->pc_flags[j] = (unsigned_1) value; + } + fscanf(f, "\n"); + + /* read learning mode info */ + block = zalloc(sizeof(sim_gx_compiled_block)); + gx->learning_block = block; + block->source_name = zalloc(PATH_MAX); + block->object_name = zalloc(PATH_MAX); + block->symbol_name = zalloc(PATH_MAX); + fscanf(f, "LEARNING %s %s %s %lu %u\n", + block->source_name, block->object_name, block->symbol_name, + & gx->compile_time, & gx->opt_compile_count); + + /* read optimized mode info */ + block = zalloc(sizeof(sim_gx_compiled_block)); + gx->optimized_block = block; + block->source_name = zalloc(PATH_MAX); + block->object_name = zalloc(PATH_MAX); + block->symbol_name = zalloc(PATH_MAX); + rc = fscanf(f, "OPTIMIZED %s %s %s\n", + block->source_name, block->object_name, block->symbol_name); + if(rc != 3) + { + /* oops, not an optimized block */ + zfree(block->source_name); + zfree(block->object_name); + zfree(block->symbol_name); + zfree(block); + gx->optimized_block = NULL; + } + + /* fill in remaining fields */ + gx->learn_last_change = time(NULL) - age; /* make absolute */ + + /* store it away */ + sim_gx_block_add(gx); + } + + print_gx_blocks(STATE_BLOCKS(sd), "after restoring state"); +} + + + + + + +/* Add a gx block to list */ +void +sim_gx_block_add(sim_gx_block* block) +{ + SIM_DESC sd = current_state; + sim_gx_block_list* blocks = STATE_BLOCKS(sd); + int i; + + /* print_gx_blocks(blocks, "pre add"); */ + + if(blocks == NULL) + blocks = STATE_BLOCKS(sd) = zalloc(sizeof(sim_gx_block_list)); + + /* need to enlarge block vector? */ + if(blocks->gx_blocks_used == blocks->gx_blocks_size) + { + sim_gx_block** new_blocks; + int j; + + blocks->gx_blocks_size += 20; + new_blocks = zalloc(blocks->gx_blocks_size * sizeof(sim_gx_block*)); + for(j=0; jgx_blocks_used; j++) + new_blocks[j] = blocks->gx_blocks[j]; + if(blocks->gx_blocks) zfree(blocks->gx_blocks); + blocks->gx_blocks = new_blocks; + } + + /* insert new block */ + for(i=0; igx_blocks_used; i++) + { + ASSERT(blocks->gx_blocks[i] != NULL); + + /* insertion point reached? */ + if(blocks->gx_blocks[i]->origin > block->origin) + { + int j; + for(j=blocks->gx_blocks_used; j>=i; j--) + blocks->gx_blocks[j] = blocks->gx_blocks[j-1]; + blocks->gx_blocks[i] = block; + blocks->gx_blocks_used ++; + break; + } + } + + /* end of block vector */ + if(i == blocks->gx_blocks_used) + { + blocks->gx_blocks[blocks->gx_blocks_used ++] = block; + } + + /* print_gx_blocks(blocks, "post add"); */ +} + + + +/* Remove a gx block from list */ +void +sim_gx_block_remove(sim_gx_block* block) +{ + SIM_DESC sd = current_state; + sim_gx_block_list* blocks = STATE_BLOCKS(sd); + int i; + + /* print_gx_blocks(blocks, "pre remove"); */ + + /* linear search */ + for(i=0; igx_blocks_used; i++) + { + if(blocks->gx_blocks[i] == block) + { + /* found it */ + while(i < blocks->gx_blocks_used - 1) + { + blocks->gx_blocks[i] = blocks->gx_blocks[i+1]; + i++; + } + blocks->gx_blocks_used --; + break; + } + } + + /* print_gx_blocks(blocks, "post remove"); */ +} + + +/* Find a gx block from list */ +sim_gx_block* +sim_gx_block_find(sim_cia cia) +{ + SIM_DESC sd = current_state; + sim_gx_block_list* blocks = STATE_BLOCKS(sd); + int i; + + if(blocks == NULL) return NULL; + + /* print_gx_blocks(blocks, "pre find"); */ + + /* linear search */ + for(i=0; igx_blocks_used; i++) + { + sim_gx_block* gx = blocks->gx_blocks[i]; + ASSERT(gx != NULL); + + if(GX_PC_INCLUDES(gx,cia)) + { + return gx; + } + } + + return NULL; +} + + + +/* generate */ +void +sim_gx_block_translate(sim_gx_block* gx, int optimized) +{ + char pwd_name[PATH_MAX]; + char dir_name[PATH_MAX]; + char base_name[PATH_MAX]; + char compile_command[PATH_MAX*4]; + char* exec_name; + SIM_DESC sd = current_state; + int rc; + sim_cia gx_cia; + sim_gx_compiled_block* block = zalloc(sizeof(sim_gx_compiled_block)); + unsigned time_begin, time_end; + + time_begin = time(NULL); + + if(optimized) gx->optimized_block = block; + else gx->learning_block = block; + + /* get base of executable name */ + exec_name = bfd_get_filename(STATE_PROG_BFD(sd)); + if(strrchr(exec_name, '/') != NULL) + exec_name = strrchr(exec_name, '/') + 1; + + /* generate base name */ + sprintf(dir_name, "%s/%s", + GX_DIR, + exec_name); + + /* generate base name */ + getcwd(pwd_name, sizeof(pwd_name)); + + /* create work directory */ + rc = mkdir(GX_DIR, 0777); + if(rc != 0 && + errno != EEXIST) + { + sim_io_error(sd, "Error: cannot create directory %s, errno %d", + GX_DIR, errno); + } + + rc = mkdir(dir_name, 0777); + if(rc != 0 && + errno != EEXIST) + { + sim_io_error(sd, "Error: cannot create directory %s, errno %d", + dir_name, errno); + } + + /* compute base name */ + if(optimized) + sprintf(base_name, "%08lx_opt%d", gx->origin, gx->opt_compile_count); + else + sprintf(base_name, "%08lx", gx->origin); + + /* generate source/object file names */ + block->source_name = zalloc(PATH_MAX); + block->object_name = zalloc(PATH_MAX); + sprintf(block->source_name, "%s/%s.c", dir_name, base_name); + + /* generate symbol name for gx function */ + block->symbol_name = zalloc(PATH_MAX); + sprintf(block->symbol_name, "gx_%s", base_name); + + /* open source file */ + block->source_file = fopen(block->source_name, "w"); + if(block->source_file == NULL) + { + sim_io_error(sd, "Error: cannot open file %s, errno %d", + block->source_name, errno); + } + + /* front matter */ + fprintf(block->source_file, "/* sim-gx version %d */\n", GX_VERSION); + fprintf(block->source_file, "/* gx block date stamp %lu */\n\n", time(NULL)); + + /* emit head end of source */ + tgx_emit_pre_function(gx, optimized); + + /* emit function header */ + fprintf(block->source_file, "\n\n"); + fprintf(block->source_file, "extern int\n"); + fprintf(block->source_file, "%s", block->symbol_name); + fprintf(block->source_file, "(struct tgx_cpu_regs* regs, char* pc_flags, struct tgx_callbacks* callbacks)\n"); + fprintf(block->source_file, "{\n"); + fprintf(block->source_file, " int rc = 0;\n"); + if(! optimized) + fprintf(block->source_file, " unsigned int insn_count = 0;\n"); + + /* pre-block gunk: register load */ + tgx_emit_load_block(gx, optimized); + + /* emit intra-block jump label */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, "shortjump:\n"); + fprintf(block->source_file, " pc = npc;\n"); + + /* translate jumptarget table */ + if(! optimized) + { + fprintf(block->source_file, " pc_flags[(pc - 0x%08x) / %u] |= %d;\n", + (unsigned)gx->origin, gx->divisor, GX_PCF_JUMPTARGET); + } + + /* enforce learning mode run limit */ + if(! optimized) + { + fprintf(block->source_file, " insn_count++;\n"); + fprintf(block->source_file, " if (insn_count > %d)\n", GX_LEARN_RUN_LIMIT); + fprintf(block->source_file, " {\n"); + fprintf(block->source_file, " rc = %d;\n", GX_F_YIELD); + fprintf(block->source_file, " npc = pc;\n"); + fprintf(block->source_file, " goto save;\n"); + fprintf(block->source_file, " }\n"); + } + + /* emit PC switch, use compressed case numbers */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, " switch((pc - 0x%08x) / %u)\n", + (unsigned)gx->origin, gx->divisor); + fprintf(block->source_file, " {\n"); + + /* handle bad-PC event */ + fprintf(block->source_file, " /* handle unknown jump target */\n"); + fprintf(block->source_file, " default:\n"); + fprintf(block->source_file, " rc = %d;\n", GX_F_NONPC); + fprintf(block->source_file, " npc = pc;\n"); + fprintf(block->source_file, " goto save;\n"); + + /* start translating at the origin */ + gx_cia = gx->origin; + + /* translate instructions in block */ + while(GX_PC_INCLUDES(gx,gx_cia)) + { + sim_cia next_gx_cia; + + /* translate PC case statement */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, " /* PC: 0x%08x, flags %02x */\n", + gx_cia, (int) GX_PC_FLAGS(gx, gx_cia)); + + + /* skip over this instruction if it is not executed */ + if(optimized && !(GX_PC_FLAGS(gx, gx_cia) & GX_PCF_INSTRUCTION)) + { + fprintf(block->source_file, " /* (not reached) */\n"); + + /* prevent fall-through from previous translated insn */ + if(gx_cia > gx->origin && + GX_PC_FLAGS(gx, (gx_cia - gx->divisor)) & GX_PCF_INSTRUCTION) + { + fprintf(block->source_file, " /* prevent fall-through */\n"); + fprintf(block->source_file, " npc = 0x%08x;\n", gx_cia); + fprintf(block->source_file, " rc = %d;\n", GX_F_NONPC); + fprintf(block->source_file, " goto save;\n"); + } + + next_gx_cia = gx_cia + gx->divisor; + goto skip_instruction; + } + + /* translate PC case statement */ + if((! optimized) || + (GX_PC_FLAGS(gx, gx_cia) & GX_PCF_JUMPTARGET)) + { + fprintf(block->source_file, " case %ld:\n", + ((gx_cia - gx->origin) / gx->divisor)); + } + + /* translate breakpoint check & exit */ + if(GX_PC_FLAGS(gx, gx_cia) & GX_PCF_COND_HALT) + { + fprintf(block->source_file, " if(pc_flags[%ld] & %d)\n", + GX_PC_FLAGS_INDEX(gx, gx_cia), + GX_PCF_HALT); + fprintf(block->source_file, " {\n"); + fprintf(block->source_file, " rc = %d;\n", GX_F_HALT); + fprintf(block->source_file, " npc = pc;\n"); + fprintf(block->source_file, " goto save;\n"); + fprintf(block->source_file, " }\n"); + } + + /* [don't] emit PC-setting */ + /* fprintf(block->source_file, " pc = 0x%08x;\n", gx_cia); */ + + /* mark traversed instructions */ + if(! optimized) + { + fprintf(block->source_file, " pc_flags[%ld] |= %d;\n", + GX_PC_FLAGS_INDEX(gx, gx_cia), + GX_PCF_INSTRUCTION); + } + + + /* translate instruction semantics */ + next_gx_cia = tgx_emit_insn(gx, gx_cia, optimized); + + skip_instruction: + + /* go to next instruction */ + gx_cia = next_gx_cia; + } + fprintf(block->source_file, " }\n"); + + /* dropped through last instruction in switch block */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, " /* dropped through PC switch */\n"); + fprintf(block->source_file, " npc = 0x%08x;\n", gx_cia); + fprintf(block->source_file, " rc = %d;\n", GX_F_RANGE); + fprintf(block->source_file, " goto save;\n"); + + /* unknown length jump */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, "unknownjump:\n"); + fprintf(block->source_file, " if(npc >= 0x%08lx && npc < 0x%08lx)\n", + gx->origin, gx->origin + gx->length); + fprintf(block->source_file, " goto shortjump;\n"); + + /* long jump */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, "longjump:\n"); + fprintf(block->source_file, " rc = %d;\n", GX_F_RANGE); + + /* post-block gunk: SAVE etc. */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, "save:\n"); + + tgx_emit_save_block(gx, optimized); + + /* emit tail end of function */ + fprintf(block->source_file, "\n"); + fprintf(block->source_file, " return rc;\n"); + fprintf(block->source_file, "}\n"); + + /* emit tail end of source */ + tgx_emit_post_function(gx, optimized); + + /* close source file */ + fclose(block->source_file); + block->source_file = NULL; + + /* compile source & produce shared object */ + + sprintf(compile_command, + "gxtool --silent --mode=compile gcc -c -g %s %s", + (optimized ? "-O3" : "-O"), block->source_name); + + rc = system(compile_command); + if(rc != 0) + { + sim_io_error(sd, "Error during compiling: `%s' rc %d", + compile_command, rc); + } + + /* link source */ + + sprintf(compile_command, + "gxtool --silent --mode=link gcc -export-dynamic -rpath %s -g -o lib%s.la %s.lo", + dir_name, base_name, base_name); + + rc = system(compile_command); + if(rc != 0) + { + sim_io_error(sd, "Error during linking: `%s' rc %d", + compile_command, rc); + } + + + /* install */ + + sprintf(compile_command, + "gxtool --silent --mode=install cp lib%s.la %s/%s >/dev/null 2>/dev/null", + base_name, pwd_name, dir_name); + + rc = system(compile_command); + if(rc != 0) + { + sim_io_error(sd, "Error during install: `%s' rc %d", + compile_command, rc); + } + + + /* finish */ + + sprintf(compile_command, + "gxtool --silent --mode=finish %s >/dev/null 2>/dev/null", + dir_name); + + rc = system(compile_command); + if(rc != 0) + { + sim_io_error(sd, "Error during finish: `%s' rc %d", + compile_command, rc); + } + + /* clean up */ + + sprintf(compile_command, "rm -f lib%s.la %s.lo", base_name, base_name); + rc = system(compile_command); + if(rc != 0) + { + sim_io_error(sd, "Error during cleanup: `%s' rc %d", + compile_command, rc); + } + + /* XXX: FILL IN block->object_name from .la file */ + sprintf(block->object_name, "%s/%s/lib%s.so.0", + pwd_name, dir_name, base_name); + + /* measure compile time */ + time_end = time(NULL); + + if(time_end == time_begin) time_end ++; /* clamp minimum duration to 1 */ + gx->compile_time += time_end - time_begin; + /* fprintf(stderr, "*** compile time: %d\n", gx->compile_time); */ +} + diff --git a/sim/common/sim-gx.h b/sim/common/sim-gx.h new file mode 100644 index 00000000000..b0d067348d0 --- /dev/null +++ b/sim/common/sim-gx.h @@ -0,0 +1,142 @@ +/* GX generic simulator structs. + Copyright (C) 1998 Cygnus Solutions. +*/ + +#ifndef SIM_GX_H +#define SIM_GX_H + +#include +#include "sim-base.h" +#include "sim-core.h" + + +/* +#ifndef SIM_GX +#error "Compile this file only if configured SIM_GX" +#endif +*/ + + +/* configuration */ + +#define GX_DIR ".gx" +#define GX_VERSION 1 + + +struct sim_gx_compiled_block; + + +/* record for a particular GX block */ +typedef struct sim_gx_block +{ + /* ---- BLOCK EXTENT ---- */ + address_word origin; /* first code-segment address translated */ + unsigned_4 length; /* length of translated code-segment */ + +#define GX_PC_INCLUDES(gx,pc) ((gx)->origin <= (pc) && (pc) < (gx)->origin + (gx)->length) + + short divisor; /* minimum instruction word size; address_word -> index divisor */ + char* pc_flags; /* see GX_PC_* below */ + +#define GX_PCF_INSTRUCTION 0x01 /* learned */ +#define GX_PCF_JUMPTARGET 0x02 /* learned */ +#define GX_PCF_COND_HALT 0x10 /* translate-time input */ +#define GX_PCF_HALT 0x20 /* run-time input */ +#define GX_PC_FLAGS_INDEX(gx,pc) ((((pc) - ((gx)->origin)) / (gx)->divisor)) +#define GX_PC_FLAGS(gx,pc) ((gx)->pc_flags[GX_PC_FLAGS_INDEX((gx),(pc))]) + + /* GX callbacks */ + struct tgx_callbacks* callbacks; + + /* compilation statistics */ + unsigned_4 compile_time; /* time to compile [s] */ + + /* ---- LEARNING MODE STATE ---- */ + unsigned_4 learn_last_change; /* time of last flag change */ + struct sim_gx_compiled_block* learning_block; + + /* ---- OPTIMIZED MODE STATE ---- */ + unsigned opt_compile_count; /* number of optimized compile attempts */ + struct sim_gx_compiled_block* optimized_block; +} sim_gx_block; + + + + +typedef struct sim_gx_compiled_block +{ + /* ---- TRANSLATION OBJECTS ---- */ + char* source_name; /* source file for translated object */ + char* object_name; /* file name of translated object */ + char* symbol_name; /* symbol name of function */ + /* (all above pointers are zalloc()'d buffers, to be zfree()'d. */ + + FILE* source_file; /* working file pointer during translation */ + + /* ---- LOADED TRANSLATIONS ---- */ + void* object_dlhandle; /* dlopen() handle to loaded object (if open) */ + void* function_dlhandle; /* dlsym() pointer to function (if found) */ +} sim_gx_compiled_block; + + + +/* GX block vector: for quick search of translated blocks */ +typedef struct sim_gx_block_list +{ + /* ---- BLOCK VECTOR ---- */ + sim_gx_block** gx_blocks; /* vector of GX blocks, sorted by origin field */ + unsigned gx_blocks_size; /* vector length */ + unsigned gx_blocks_used; /* number of elements used in vector */ + address_word gx_first, gx_last; /* first & last addresses translated by any gx block */ +} sim_gx_block_list; + + +/* actual gx function pointer type */ +struct tgx_cpu_regs; +typedef int (*sim_gx_function)(struct tgx_cpu_regs* cpu, char* pc_flags, struct tgx_callbacks* callbacks); + + +/* return values from gx function */ +#define GX_F_HALT 0 +#define GX_F_NONPC 1 +#define GX_F_RANGE 2 +#define GX_F_YIELD 3 + + +/* Limit on loop cycles within a learning mode gx block */ +#define GX_LEARN_RUN_LIMIT 10000 + +/* Operations */ +sim_gx_block* sim_gx_block_create(sim_cia cia); + +sim_gx_block* sim_gx_block_find(sim_cia cia); +void sim_gx_block_add(sim_gx_block* block); +void sim_gx_block_remove(sim_gx_block* block); + +/* State save/restore */ +void sim_gx_write_block_list(); +void sim_gx_read_block_list(); + +sim_gx_function sim_gx_compiled_block_f(sim_gx_compiled_block* gx); +void sim_gx_compiled_block_dispose(sim_gx_compiled_block* gx); +void sim_gx_block_translate(sim_gx_block* gx, int optimized); + + + +/* Target-specific translation operations */ + +int tgx_optimize_test(sim_gx_block* block); + +void tgx_block_ctor(sim_gx_block* block, sim_cia cia); +void tgx_block_ctor2(sim_gx_block* block, unsigned_4 origin, + unsigned_4 length, unsigned_4 divisor); +void tgx_block_dtor(sim_gx_block* block); + +void tgx_emit_pre_function(sim_gx_block* block, int optimized); +void tgx_emit_load_block(sim_gx_block* block, int optimized); +sim_cia tgx_emit_insn(sim_gx_block* block, sim_cia cia, int optimized); +void tgx_emit_save_block(sim_gx_block* block, int optimized); +void tgx_emit_post_function(sim_gx_block* block, int optimized); + + +#endif /* SIM_GX_H */ diff --git a/sim/configure.in b/sim/configure.in index 60e490ddab2..e094487f9dd 100644 --- a/sim/configure.in +++ b/sim/configure.in @@ -136,6 +136,19 @@ case "${target}" in esac +# start-sanitize-gxsim +AC_ARG_ENABLE(sim-gx, [], +[case "${enableval}" in + yes) + if test -d ${srcdir}/${sim_target}-gx ; then + extra_subdirs="${sim_target}-gx" + else + AC_MSG_WARN(GX simulator not available for ${sim_target}) + fi ;; +esac])dnl +# end-sanitize-gxsim + + # Is there a testsuite directory for the target? testdir=`echo ${target} | sed -e 's/-.*-/-/'` if test -r ${srcdir}/testsuite/${testdir}/configure ; then diff --git a/sim/m32r-gx/.Sanitize b/sim/m32r-gx/.Sanitize new file mode 100644 index 00000000000..70e5bcb2c9f --- /dev/null +++ b/sim/m32r-gx/.Sanitize @@ -0,0 +1,46 @@ +# Sanitize.in for sim/m32r +# $Id$ + +# Each directory to survive it's way into a release will need a file +# like this one called "./.Sanitize". All keyword lines must exist, +# and must exist in the order specified by this file. Each directory +# in the tree will be processed, top down, in the following order. + +# Hash started lines like this one are comments and will be deleted +# before anything else is done. Blank lines will also be squashed +# out. + +# The lines between the "Do-first:" line and the "Things-to-keep:" +# line are executed as a /bin/sh shell script before anything else is +# done in this + +Do-first: + +# All files listed between the "Things-to-keep:" line and the +# "Files-to-sed:" line will be kept. All other files will be removed. +# Directories listed in this section will have their own Sanitize +# called. Directories not listed will be removed in their entirety +# with rm -rf. + +Things-to-keep: + +ChangeLog +Makefile.in +arch.h +config.in +configure +configure.in +cpuall.h +gx-translate.c +ltconfig +ltmain.sh +m32r-sim.h +sim-if.c +sim-main.h +tconfig.in + +Things-to-lose: + +Do-last: + +# End of file. diff --git a/sim/m32r-gx/ChangeLog b/sim/m32r-gx/ChangeLog new file mode 100644 index 00000000000..9905bf3f6af --- /dev/null +++ b/sim/m32r-gx/ChangeLog @@ -0,0 +1,3 @@ +1998-11-13 Frank Ch. Eigler + + * (*): New files: snapshot of gx simulator prototype. diff --git a/sim/m32r-gx/Makefile.in b/sim/m32r-gx/Makefile.in new file mode 100644 index 00000000000..d3c651e2ec2 --- /dev/null +++ b/sim/m32r-gx/Makefile.in @@ -0,0 +1,104 @@ +# Makefile template for Configure for the m32r simulator +# Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc. +# Contributed by Cygnus Support. +# +# This file is part of GDB, the GNU debugger. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +## COMMON_PRE_CONFIG_FRAG + +M32R_OBJS = gx-translate.o + +CONFIG_DEVICES = dv-sockser.o +CONFIG_DEVICES = + +SIM_OBJS = \ + sim-bits.o \ + sim-break.o \ + sim-config.o \ + sim-core.o \ + sim-endian.o \ + sim-events.o \ + sim-fpu.o \ + sim-io.o \ + sim-if.o \ + sim-info.o \ + sim-load.o \ + sim-memopt.o \ + sim-module.o \ + sim-options.o \ + sim-signal.o \ + sim-trace.o \ + sim-utils.o \ + sim-watch.o \ + sim-cpu.o \ + sim-engine.o \ + sim-core.o \ + sim-hload.o \ + sim-hrw.o \ + sim-reason.o \ + $(M32R_OBJS) \ + sim-gx.o \ + sim-gx-run.o \ + $(CONFIG_DEVICES) + +# Extra headers included by sim-main.h. +SIM_EXTRA_DEPS = \ + arch.h cpuall.h m32r-sim.h cpu-opc.h + +SIM_EXTRA_CFLAGS = -DSIM_GX=1 +SIM_EXTRA_ALL = gxtool +SIM_EXTRA_INSTALL = install-gxtool +SIM_RUN_OBJS = nrun.o +SIM_EXTRA_CLEAN = m32r-clean + +# This selects the m32r newlib/libgloss syscall definitions. +NL_TARGET = -DNL_TARGET_m32r + +## COMMON_POST_CONFIG_FRAG + +arch = m32r + +MAIN_INCLUDE_DEPS = \ + sim-main.h \ + $(srcdir)/../common/sim-config.h \ + $(srcdir)/../common/sim-base.h \ + $(srcdir)/../common/sim-basics.h \ + $(srcdir)/../common/sim-module.h \ + $(srcdir)/../common/sim-trace.h \ + tconfig.h +INCLUDE_DEPS = $(MAIN_INCLUDE_DEPS) $(SIM_EXTRA_DEPS) cpu-sim.h +OPS_INCLUDE_DEPS = \ + $(srcdir)/../common/cgen-mem.h \ + $(srcdir)/../common/cgen-ops.h + +sim-if.o: sim-if.c $(INCLUDE_DEPS) $(srcdir)/../common/sim-core.h + +arch.o: arch.c $(INCLUDE_DEPS) + +# M32R objs + +m32r.o: m32r.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h + +m32r-clean: + rm -f mloop.c stamp-arch stamp-cpu stamp-decode + rm -f tmp-* + +gxtool: ltconfig ltmain.sh + $(SHELL) $(srcdir)/ltconfig --disable-static -o $@ $(srcdir)/ltmain.sh + +install-gxtool: gxtool + $(INSTALL_PROGRAM) gxtool $(bindir) diff --git a/sim/m32r-gx/arch.h b/sim/m32r-gx/arch.h new file mode 100644 index 00000000000..f43c0b33c8c --- /dev/null +++ b/sim/m32r-gx/arch.h @@ -0,0 +1,52 @@ +/* Simulator header for m32r. + +This file is machine generated with CGEN. + +Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc. + +This file is part of the GNU Simulators. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along +with this program; if not, write to the Free Software Foundation, Inc., +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +*/ + +#ifndef M32R_ARCH_H +#define M32R_ARCH_H + +#include "m32r-opc.h" + +#define TARGET_BIG_ENDIAN 1 + +/* Shorthand macro for fetching registers. */ +#define CPU(x) (CPU_CGEN_HW (current_cpu)->x) + +typedef enum model_type { + MODEL_M32R_D, MODEL_TEST + , MODEL_MAX +} MODEL_TYPE; + +#define MAX_MODELS ((int) MODEL_MAX) + +/* Enum declaration for unit types. */ +typedef enum unit_type { + UNIT_NONE, UNIT_M32R_D_U_STORE, UNIT_M32R_D_U_LOAD, UNIT_M32R_D_U_EXEC + , UNIT_TEST_U_EXEC + , UNIT_MAX +} UNIT_TYPE; + +#define MAX_UNITS (1) + +#endif /* M32R_ARCH_H */ + diff --git a/sim/m32r-gx/config.in b/sim/m32r-gx/config.in new file mode 100644 index 00000000000..f0f9414fbf6 --- /dev/null +++ b/sim/m32r-gx/config.in @@ -0,0 +1,180 @@ +/* config.in. Generated automatically from configure.in by autoheader. */ + +/* Define if using alloca.c. */ +#undef C_ALLOCA + +/* Define to empty if the keyword does not work. */ +#undef const + +/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. + This function is required for alloca.c support on those systems. */ +#undef CRAY_STACKSEG_END + +/* Define if you have alloca, as a function or macro. */ +#undef HAVE_ALLOCA + +/* Define if you have and it should be used (not on Ultrix). */ +#undef HAVE_ALLOCA_H + +/* Define if you have a working `mmap' system call. */ +#undef HAVE_MMAP + +/* Define as __inline if that's what the C compiler calls it. */ +#undef inline + +/* Define to `long' if doesn't define. */ +#undef off_t + +/* Define if you need to in order for stat and other things to work. */ +#undef _POSIX_SOURCE + +/* Define as the return type of signal handlers (int or void). */ +#undef RETSIGTYPE + +/* Define to `unsigned' if doesn't define. */ +#undef size_t + +/* If using the C implementation of alloca, define if you know the + direction of stack growth for your system; otherwise it will be + automatically deduced at run-time. + STACK_DIRECTION > 0 => grows toward higher addresses + STACK_DIRECTION < 0 => grows toward lower addresses + STACK_DIRECTION = 0 => direction of growth unknown + */ +#undef STACK_DIRECTION + +/* Define if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define if your processor stores words with the most significant + byte first (like Motorola and SPARC, unlike Intel and VAX). */ +#undef WORDS_BIGENDIAN + +/* Define to 1 if NLS is requested. */ +#undef ENABLE_NLS + +/* Define as 1 if you have gettext and don't want to use GNU gettext. */ +#undef HAVE_GETTEXT + +/* Define as 1 if you have the stpcpy function. */ +#undef HAVE_STPCPY + +/* Define if your locale.h file contains LC_MESSAGES. */ +#undef HAVE_LC_MESSAGES + +/* Define if you have the __argz_count function. */ +#undef HAVE___ARGZ_COUNT + +/* Define if you have the __argz_next function. */ +#undef HAVE___ARGZ_NEXT + +/* Define if you have the __argz_stringify function. */ +#undef HAVE___ARGZ_STRINGIFY + +/* Define if you have the __setfpucw function. */ +#undef HAVE___SETFPUCW + +/* Define if you have the dcgettext function. */ +#undef HAVE_DCGETTEXT + +/* Define if you have the getcwd function. */ +#undef HAVE_GETCWD + +/* Define if you have the getpagesize function. */ +#undef HAVE_GETPAGESIZE + +/* Define if you have the getrusage function. */ +#undef HAVE_GETRUSAGE + +/* Define if you have the munmap function. */ +#undef HAVE_MUNMAP + +/* Define if you have the putenv function. */ +#undef HAVE_PUTENV + +/* Define if you have the setenv function. */ +#undef HAVE_SETENV + +/* Define if you have the setlocale function. */ +#undef HAVE_SETLOCALE + +/* Define if you have the sigaction function. */ +#undef HAVE_SIGACTION + +/* Define if you have the stpcpy function. */ +#undef HAVE_STPCPY + +/* Define if you have the strcasecmp function. */ +#undef HAVE_STRCASECMP + +/* Define if you have the strchr function. */ +#undef HAVE_STRCHR + +/* Define if you have the time function. */ +#undef HAVE_TIME + +/* Define if you have the header file. */ +#undef HAVE_ARGZ_H + +/* Define if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define if you have the header file. */ +#undef HAVE_ERRNO_H + +/* Define if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define if you have the header file. */ +#undef HAVE_FPU_CONTROL_H + +/* Define if you have the header file. */ +#undef HAVE_LIMITS_H + +/* Define if you have the header file. */ +#undef HAVE_LOCALE_H + +/* Define if you have the header file. */ +#undef HAVE_MALLOC_H + +/* Define if you have the header file. */ +#undef HAVE_NL_TYPES_H + +/* Define if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define if you have the header file. */ +#undef HAVE_STRING_H + +/* Define if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_PARAM_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_RESOURCE_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_TIME_H + +/* Define if you have the header file. */ +#undef HAVE_TIME_H + +/* Define if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define if you have the header file. */ +#undef HAVE_VALUES_H + +/* Define if you have the dl library (-ldl). */ +#undef HAVE_LIBDL + +/* Define if you have the nsl library (-lnsl). */ +#undef HAVE_LIBNSL + +/* Define if you have the socket library (-lsocket). */ +#undef HAVE_LIBSOCKET diff --git a/sim/m32r-gx/configure b/sim/m32r-gx/configure new file mode 100755 index 00000000000..1423a06ab72 --- /dev/null +++ b/sim/m32r-gx/configure @@ -0,0 +1,4205 @@ +#! /bin/sh + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +sim_inline="-DDEFAULT_INLINE=0" + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# This file is derived from `gettext.m4'. The difference is that the +# included macros assume Cygnus-style source and build trees. + +# Macro to add for using GNU gettext. +# Ulrich Drepper , 1995. +# +# This file file be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU Public License +# but which still want to provide support for the GNU gettext functionality. +# Please note that the actual code is *not* freely available. + +# serial 3 + + + + + +# Search path for a program which passes the given test. +# Ulrich Drepper , 1996. +# +# This file file be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU Public License +# but which still want to provide support for the GNU gettext functionality. +# Please note that the actual code is *not* freely available. + +# serial 1 + + + +# Check whether LC_MESSAGES is available in . +# Ulrich Drepper , 1995. +# +# This file file be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU Public License +# but which still want to provide support for the GNU gettext functionality. +# Please note that the actual code is *not* freely available. + +# serial 1 + + + +# Check to see if we're running under Cygwin32, without using +# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". +# Otherwise set it to "no". + + + +# Check to see if we're running under Win32, without using +# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". +# Otherwise set it to "". + + + + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.12.2 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --disable-nls do not use Native Language Support" +ac_help="$ac_help + --with-included-gettext use the GNU gettext library included here" +ac_help="$ac_help + --enable-maintainer-mode Enable developer functionality." +ac_help="$ac_help + --enable-sim-bswap Use Host specific BSWAP instruction." +ac_help="$ac_help + --enable-sim-cflags=opts Extra CFLAGS for use in building simulator" +ac_help="$ac_help + --enable-sim-debug=opts Enable debugging flags" +ac_help="$ac_help + --enable-sim-stdio Specify whether to use stdio for console input/output." +ac_help="$ac_help + --enable-sim-trace=opts Enable tracing flags" +ac_help="$ac_help + --enable-sim-profile=opts Enable profiling flags" +ac_help="$ac_help + --enable-sim-endian=endian Specify target byte endian orientation." +ac_help="$ac_help + --enable-sim-alignment=align Specify strict, nonstrict or forced alignment of memory accesses." +ac_help="$ac_help + --enable-sim-hostendian=end Specify host byte endian orientation." +ac_help="$ac_help + --enable-sim-default-model=model Specify default model to simulate." +ac_help="$ac_help + --enable-sim-environment=environment Specify mixed, user, virtual or operating environment." + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.12.2" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=Makefile.in + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:688: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:726: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:768: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 +echo "configure:795: checking for POSIXized ISC" >&5 +if test -d /etc/conf/kconfig.d && + grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 +then + echo "$ac_t""yes" 1>&6 + ISC=yes # If later tests want to check for ISC. + cat >> confdefs.h <<\EOF +#define _POSIX_SOURCE 1 +EOF + + if test "$GCC" = yes; then + CC="$CC -posix" + else + CC="$CC -Xp" + fi +else + echo "$ac_t""no" 1>&6 + ISC= +fi + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:816: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#include +#include +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext < +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + +echo $ac_n "checking for working const""... $ac_c" 1>&6 +echo "configure:920: checking for working const" >&5 +if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <j = 5; +} +{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; +} + +; return 0; } +EOF +if { (eval echo configure:974: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_const=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_c_const=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_c_const" 1>&6 +if test $ac_cv_c_const = no; then + cat >> confdefs.h <<\EOF +#define const +EOF + +fi + +echo $ac_n "checking for inline""... $ac_c" 1>&6 +echo "configure:995: checking for inline" >&5 +if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_inline=$ac_kw; break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done + +fi + +echo "$ac_t""$ac_cv_c_inline" 1>&6 +case "$ac_cv_c_inline" in + inline | yes) ;; + no) cat >> confdefs.h <<\EOF +#define inline +EOF + ;; + *) cat >> confdefs.h <&6 +echo "configure:1035: checking for off_t" >&5 +if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_off_t=yes +else + rm -rf conftest* + ac_cv_type_off_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_off_t" 1>&6 +if test $ac_cv_type_off_t = no; then + cat >> confdefs.h <<\EOF +#define off_t long +EOF + +fi + +echo $ac_n "checking for size_t""... $ac_c" 1>&6 +echo "configure:1068: checking for size_t" >&5 +if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_size_t=yes +else + rm -rf conftest* + ac_cv_type_size_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_size_t" 1>&6 +if test $ac_cv_type_size_t = no; then + cat >> confdefs.h <<\EOF +#define size_t unsigned +EOF + +fi + +# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works +# for constant arguments. Useless! +echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 +echo "configure:1103: checking for working alloca.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { +char *p = alloca(2 * sizeof(int)); +; return 0; } +EOF +if { (eval echo configure:1115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_header_alloca_h=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_alloca_h=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_header_alloca_h" 1>&6 +if test $ac_cv_header_alloca_h = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_ALLOCA_H 1 +EOF + +fi + +echo $ac_n "checking for alloca""... $ac_c" 1>&6 +echo "configure:1136: checking for alloca" >&5 +if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +# define alloca _alloca +# else +# if HAVE_ALLOCA_H +# include +# else +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ +char *alloca (); +# endif +# endif +# endif +# endif +#endif + +int main() { +char *p = (char *) alloca(1); +; return 0; } +EOF +if { (eval echo configure:1169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_func_alloca_works=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_func_alloca_works=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_func_alloca_works" 1>&6 +if test $ac_cv_func_alloca_works = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_ALLOCA 1 +EOF + +fi + +if test $ac_cv_func_alloca_works = no; then + # The SVR3 libPW and SVR4 libucb both contain incompatible functions + # that cause trouble. Some versions do not even contain alloca or + # contain a buggy version. If you still want to use their alloca, + # use ar to extract alloca.o from them instead of compiling alloca.c. + ALLOCA=alloca.${ac_objext} + cat >> confdefs.h <<\EOF +#define C_ALLOCA 1 +EOF + + +echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 +echo "configure:1201: checking whether alloca needs Cray hooks" >&5 +if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5 | + egrep "webecray" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_os_cray=yes +else + rm -rf conftest* + ac_cv_os_cray=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_os_cray" 1>&6 +if test $ac_cv_os_cray = yes; then +for ac_func in _getb67 GETB67 getb67; do + echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:1231: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + cat >> confdefs.h <&6 +fi + +done +fi + +echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 +echo "configure:1286: checking stack direction for C alloca" >&5 +if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_stack_direction=0 +else + cat > conftest.$ac_ext < addr) ? 1 : -1; +} +main () +{ + exit (find_stack_direction() < 0); +} +EOF +if { (eval echo configure:1313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + ac_cv_c_stack_direction=1 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_c_stack_direction=-1 +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$ac_cv_c_stack_direction" 1>&6 +cat >> confdefs.h <&6 +echo "configure:1338: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1348: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_func in getpagesize +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:1377: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + +echo $ac_n "checking for working mmap""... $ac_c" 1>&6 +echo "configure:1430: checking for working mmap" >&5 +if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_mmap_fixed_mapped=no +else + cat > conftest.$ac_ext < +#include +#include + +/* This mess was copied from the GNU getpagesize.h. */ +#ifndef HAVE_GETPAGESIZE +# ifdef HAVE_UNISTD_H +# include +# endif + +/* Assume that all systems that can run configure have sys/param.h. */ +# ifndef HAVE_SYS_PARAM_H +# define HAVE_SYS_PARAM_H 1 +# endif + +# ifdef _SC_PAGESIZE +# define getpagesize() sysconf(_SC_PAGESIZE) +# else /* no _SC_PAGESIZE */ +# ifdef HAVE_SYS_PARAM_H +# include +# ifdef EXEC_PAGESIZE +# define getpagesize() EXEC_PAGESIZE +# else /* no EXEC_PAGESIZE */ +# ifdef NBPG +# define getpagesize() NBPG * CLSIZE +# ifndef CLSIZE +# define CLSIZE 1 +# endif /* no CLSIZE */ +# else /* no NBPG */ +# ifdef NBPC +# define getpagesize() NBPC +# else /* no NBPC */ +# ifdef PAGESIZE +# define getpagesize() PAGESIZE +# endif /* PAGESIZE */ +# endif /* no NBPC */ +# endif /* no NBPG */ +# endif /* no EXEC_PAGESIZE */ +# else /* no HAVE_SYS_PARAM_H */ +# define getpagesize() 8192 /* punt totally */ +# endif /* no HAVE_SYS_PARAM_H */ +# endif /* no _SC_PAGESIZE */ + +#endif /* no HAVE_GETPAGESIZE */ + +#ifdef __cplusplus +extern "C" { void *malloc(unsigned); } +#else +char *malloc(); +#endif + +int +main() +{ + char *data, *data2, *data3; + int i, pagesize; + int fd; + + pagesize = getpagesize(); + + /* + * First, make a file with some known garbage in it. + */ + data = malloc(pagesize); + if (!data) + exit(1); + for (i = 0; i < pagesize; ++i) + *(data + i) = rand(); + umask(0); + fd = creat("conftestmmap", 0600); + if (fd < 0) + exit(1); + if (write(fd, data, pagesize) != pagesize) + exit(1); + close(fd); + + /* + * Next, try to mmap the file at a fixed address which + * already has something else allocated at it. If we can, + * also make sure that we see the same garbage. + */ + fd = open("conftestmmap", O_RDWR); + if (fd < 0) + exit(1); + data2 = malloc(2 * pagesize); + if (!data2) + exit(1); + data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1); + if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) + exit(1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) + exit(1); + + /* + * Finally, make sure that changes to the mapped area + * do not percolate back to the file as seen by read(). + * (This is a bug on some variants of i386 svr4.0.) + */ + for (i = 0; i < pagesize; ++i) + *(data2 + i) = *(data2 + i) + 1; + data3 = malloc(pagesize); + if (!data3) + exit(1); + if (read(fd, data3, pagesize) != pagesize) + exit(1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) + exit(1); + close(fd); + unlink("conftestmmap"); + exit(0); +} + +EOF +if { (eval echo configure:1578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + ac_cv_func_mmap_fixed_mapped=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_func_mmap_fixed_mapped=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6 +if test $ac_cv_func_mmap_fixed_mapped = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_MMAP 1 +EOF + +fi + + +# autoconf.info says this should be called right after AC_INIT. + + +ac_aux_dir= +for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:1651: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 +echo "configure:1672: checking target system type" >&5 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:1690: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1734: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1763: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1813: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1844: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:1878: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1883: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1911: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:1954: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +# Put a plausible default for CC_FOR_BUILD in Makefile. +if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' +else + CC_FOR_BUILD=gcc +fi + + + + +AR=${AR-ar} + +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2020: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +ALL_LINGUAS= + + for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \ +unistd.h values.h sys/param.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2054: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2064: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + + for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:2094: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + + if test "${ac_cv_func_stpcpy+set}" != "set"; then + for ac_func in stpcpy +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:2151: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + fi + if test "${ac_cv_func_stpcpy}" = "yes"; then + cat >> confdefs.h <<\EOF +#define HAVE_STPCPY 1 +EOF + + fi + + if test $ac_cv_header_locale_h = yes; then + echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 +echo "configure:2213: checking for LC_MESSAGES" >&5 +if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { +return LC_MESSAGES +; return 0; } +EOF +if { (eval echo configure:2225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + am_cv_val_LC_MESSAGES=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + am_cv_val_LC_MESSAGES=no +fi +rm -f conftest* +fi + +echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6 + if test $am_cv_val_LC_MESSAGES = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_LC_MESSAGES 1 +EOF + + fi + fi + echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 +echo "configure:2246: checking whether NLS is requested" >&5 + # Check whether --enable-nls or --disable-nls was given. +if test "${enable_nls+set}" = set; then + enableval="$enable_nls" + USE_NLS=$enableval +else + USE_NLS=yes +fi + + echo "$ac_t""$USE_NLS" 1>&6 + + + USE_INCLUDED_LIBINTL=no + + if test "$USE_NLS" = "yes"; then + cat >> confdefs.h <<\EOF +#define ENABLE_NLS 1 +EOF + + echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 +echo "configure:2266: checking whether included gettext is requested" >&5 + # Check whether --with-included-gettext or --without-included-gettext was given. +if test "${with_included_gettext+set}" = set; then + withval="$with_included_gettext" + nls_cv_force_use_gnu_gettext=$withval +else + nls_cv_force_use_gnu_gettext=no +fi + + echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6 + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + nls_cv_header_intl= + nls_cv_header_libgt= + CATOBJEXT=NONE + + ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 +echo "configure:2285: checking for libintl.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2295: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 +echo "configure:2312: checking for gettext in libc" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { +return (int) gettext ("") +; return 0; } +EOF +if { (eval echo configure:2324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + gt_cv_func_gettext_libc=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + gt_cv_func_gettext_libc=no +fi +rm -f conftest* +fi + +echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 + + if test "$gt_cv_func_gettext_libc" != "yes"; then + echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 +echo "configure:2340: checking for bindtextdomain in -lintl" >&5 +ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lintl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 +echo "configure:2375: checking for gettext in libintl" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + gt_cv_func_gettext_libintl=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + gt_cv_func_gettext_libintl=no +fi +rm -f conftest* +fi + +echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + fi + + if test "$gt_cv_func_gettext_libc" = "yes" \ + || test "$gt_cv_func_gettext_libintl" = "yes"; then + cat >> confdefs.h <<\EOF +#define HAVE_GETTEXT 1 +EOF + + # Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2415: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$MSGFMT" in + /*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then + ac_cv_path_MSGFMT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test -n "$MSGFMT"; then + echo "$ac_t""$MSGFMT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + if test "$MSGFMT" != "no"; then + for ac_func in dcgettext +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:2449: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2504: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$GMSGFMT" in + /*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_GMSGFMT="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT="$ac_cv_path_GMSGFMT" +if test -n "$GMSGFMT"; then + echo "$ac_t""$GMSGFMT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + # Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2539: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$XGETTEXT" in + /*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test -n "$XGETTEXT"; then + echo "$ac_t""$XGETTEXT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + CATOBJEXT=.gmo + DATADIRNAME=share +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CATOBJEXT=.mo + DATADIRNAME=lib +fi +rm -f conftest* + INSTOBJEXT=.mo + fi + fi + +else + echo "$ac_t""no" 1>&6 +fi + + + + if test "$CATOBJEXT" = "NONE"; then + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + INTLOBJS="\$(GETTOBJS)" + # Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2611: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$MSGFMT" in + /*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then + ac_cv_path_MSGFMT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test -n "$MSGFMT"; then + echo "$ac_t""$MSGFMT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2645: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$GMSGFMT" in + /*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_GMSGFMT="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT="$ac_cv_path_GMSGFMT" +if test -n "$GMSGFMT"; then + echo "$ac_t""$GMSGFMT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + # Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2680: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$XGETTEXT" in + /*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test -n "$XGETTEXT"; then + echo "$ac_t""$XGETTEXT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + USE_INCLUDED_LIBINTL=yes + CATOBJEXT=.gmo + INSTOBJEXT=.mo + DATADIRNAME=share + INTLDEPS='$(top_builddir)/../intl/libintl.a' + INTLLIBS=$INTLDEPS + LIBS=`echo $LIBS | sed -e 's/-lintl//'` + nls_cv_header_intl=libintl.h + nls_cv_header_libgt=libgettext.h + fi + + if test "$XGETTEXT" != ":"; then + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6 + XGETTEXT=":" + fi + fi + + # We need to process the po/ directory. + POSUB=po + else + DATADIRNAME=share + nls_cv_header_intl=libintl.h + nls_cv_header_libgt=libgettext.h + fi + + # If this is used in GNU gettext we have to set USE_NLS to `yes' + # because some of the sources are only built for this goal. + if test "$PACKAGE" = gettext; then + USE_NLS=yes + USE_INCLUDED_LIBINTL=yes + fi + + for lang in $ALL_LINGUAS; do + GMOFILES="$GMOFILES $lang.gmo" + POFILES="$POFILES $lang.po" + done + + + + + + + + + + + + + + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 +echo "configure:2770: checking for catalogs to be installed" >&5 + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + echo "$ac_t""$LINGUAS" 1>&6 + fi + + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + if test $ac_cv_header_locale_h = yes; then + INCLUDE_LOCALE_H="#include " + else + INCLUDE_LOCALE_H="\ +/* The system does not provide the header . Take care yourself. */" + fi + + + if test -f $srcdir/po2tbl.sed.in; then + if test "$CATOBJEXT" = ".cat"; then + ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 +echo "configure:2798: checking for linux/version.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2808: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + msgformat=linux +else + echo "$ac_t""no" 1>&6 +msgformat=xopen +fi + + + sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed + fi + sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ + $srcdir/po2tbl.sed.in > po2tbl.sed + fi + + if test "$PACKAGE" = "gettext"; then + GT_NO="#NO#" + GT_YES= + else + GT_NO= + GT_YES="#YES#" + fi + + + + MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs" + + + l= + + + if test -d $srcdir/po; then + test -d po || mkdir po + if test "x$srcdir" != "x."; then + if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then + posrcprefix="$srcdir/" + else + posrcprefix="../$srcdir/" + fi + else + posrcprefix="../" + fi + rm -f po/POTFILES + sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ + < $srcdir/po/POTFILES.in > po/POTFILES + fi + + +# Check for common headers. +# FIXME: Seems to me this can cause problems for i386-windows hosts. +# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*. +for ac_hdr in stdlib.h string.h strings.h unistd.h time.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2877: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2887: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_hdr in sys/time.h sys/resource.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2917: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_hdr in fcntl.h fpu_control.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2957: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2997: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_func in getrusage time sigaction __setfpucw +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:3036: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:3064: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + +# Check for socket libraries +echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 +echo "configure:3091: checking for bind in -lsocket" >&5 +ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsocket $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + +echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +echo "configure:3138: checking for gethostbyname in -lnsl" >&5 +ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lnsl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + + +. ${srcdir}/../../bfd/configure.host + + + +USE_MAINTAINER_MODE=no +# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + case "${enableval}" in + yes) MAINT="" USE_MAINTAINER_MODE=yes ;; + no) MAINT="#" ;; + *) { echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;; +esac +if test x"$silent" != x"yes" && test x"$MAINT" = x""; then + echo "Setting maintainer mode" 6>&1 +fi +else + MAINT="#" +fi + + + +# Check whether --enable-sim-bswap or --disable-sim-bswap was given. +if test "${enable_sim_bswap+set}" = set; then + enableval="$enable_sim_bswap" + case "${enableval}" in + yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; + no) sim_bswap="-DWITH_BSWAP=0";; + *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; +esac +if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then + echo "Setting bswap flags = $sim_bswap" 6>&1 +fi +else + sim_bswap="" +fi + + + +# Check whether --enable-sim-cflags or --disable-sim-cflags was given. +if test "${enable_sim_cflags+set}" = set; then + enableval="$enable_sim_cflags" + case "${enableval}" in + yes) sim_cflags="-O2 -fomit-frame-pointer";; + trace) { echo "configure: error: "Please use --enable-sim-debug instead."" 1>&2; exit 1; }; sim_cflags="";; + no) sim_cflags="";; + *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then + echo "Setting sim cflags = $sim_cflags" 6>&1 +fi +else + sim_cflags="" +fi + + + +# Check whether --enable-sim-debug or --disable-sim-debug was given. +if test "${enable_sim_debug+set}" = set; then + enableval="$enable_sim_debug" + case "${enableval}" in + yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";; + no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";; + *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";; +esac +if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then + echo "Setting sim debug = $sim_debug" 6>&1 +fi +else + sim_debug="" +fi + + + +# Check whether --enable-sim-stdio or --disable-sim-stdio was given. +if test "${enable_sim_stdio+set}" = set; then + enableval="$enable_sim_stdio" + case "${enableval}" in + yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";; + no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";; + *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";; +esac +if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then + echo "Setting stdio flags = $sim_stdio" 6>&1 +fi +else + sim_stdio="" +fi + + + +# Check whether --enable-sim-trace or --disable-sim-trace was given. +if test "${enable_sim_trace+set}" = set; then + enableval="$enable_sim_trace" + case "${enableval}" in + yes) sim_trace="-DTRACE=1 -DWITH_TRACE=-1";; + no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; + [-0-9]*) + sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; + [a-z]*) + sim_trace="" + for x in `echo "$enableval" | sed -e "s/,/ /g"`; do + if test x"$sim_trace" = x; then + sim_trace="-DWITH_TRACE='(TRACE_$x" + else + sim_trace="${sim_trace}|TRACE_$x" + fi + done + sim_trace="$sim_trace)'" ;; +esac +if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then + echo "Setting sim trace = $sim_trace" 6>&1 +fi +else + sim_trace="" +fi + + + +# Check whether --enable-sim-profile or --disable-sim-profile was given. +if test "${enable_sim_profile+set}" = set; then + enableval="$enable_sim_profile" + case "${enableval}" in + yes) sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";; + no) sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";; + [-0-9]*) + sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";; + [a-z]*) + sim_profile="" + for x in `echo "$enableval" | sed -e "s/,/ /g"`; do + if test x"$sim_profile" = x; then + sim_profile="-DWITH_PROFILE='(PROFILE_$x" + else + sim_profile="${sim_profile}|PROFILE_$x" + fi + done + sim_profile="$sim_profile)'" ;; +esac +if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then + echo "Setting sim profile = $sim_profile" 6>&1 +fi +else + sim_profile="" +fi + + + +echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 +echo "configure:3333: checking return type of signal handlers" >&5 +if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" void (*signal (int, void (*)(int)))(int); +#else +void (*signal ()) (); +#endif + +int main() { +int i; +; return 0; } +EOF +if { (eval echo configure:3355: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_type_signal=void +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_type_signal=int +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_type_signal" 1>&6 +cat >> confdefs.h <&6 +echo "configure:3375: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` +rm -f am_c_test* +fi + +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +echo "$ac_t""${am_cv_exeext}" 1>&6 + + +sim_link_files= +sim_link_links= + +sim_link_links=tconfig.h +if test -f ${srcdir}/tconfig.in +then + sim_link_files=tconfig.in +else + sim_link_files=../common/tconfig.in +fi + +# targ-vals.def points to the libc macro description file. +case "${target}" in +*-*-*) TARG_VALS_DEF=../common/nltvals.def ;; +esac +sim_link_files="${sim_link_files} ${TARG_VALS_DEF}" +sim_link_links="${sim_link_links} targ-vals.def" + + + +program_transform_name="s,^,${program_prefix}gx-," +target_alias="${target_alias}-gx" + +sim_link_files="${sim_link_files} m32r-sim.h ../../opcodes/m32r-opc.h" +sim_link_links="${sim_link_links} cpu-sim.h cpu-opc.h" + + +wire_endian="BIG_ENDIAN" +default_endian="" +# Check whether --enable-sim-endian or --disable-sim-endian was given. +if test "${enable_sim_endian+set}" = set; then + enableval="$enable_sim_endian" + case "${enableval}" in + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + yes) if test x"$wire_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + else + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + else + echo "No hard-wired endian for target $target" 1>&6 + sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + fi + fi;; + no) if test x"$default_endian" != x; then + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + else + if test x"$wire_endian" != x; then + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + else + echo "No default endian for target $target" 1>&6 + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + fi + fi;; + *) { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";; +esac +if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then + echo "Setting endian flags = $sim_endian" 6>&1 +fi +else + if test x"$default_endian" != x; then + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" +else + if test x"$wire_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + else + sim_endian= + fi +fi +fi + +wire_alignment="NONSTRICT_ALIGNMENT" +default_alignment="" + +# Check whether --enable-sim-alignment or --disable-sim-alignment was given. +if test "${enable_sim_alignment+set}" = set; then + enableval="$enable_sim_alignment" + case "${enableval}" in + strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; + nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; + forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";; + yes) if test x"$wire_alignment" != x; then + sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}" + else + if test x"$default_alignment" != x; then + sim_alignment="-DWITH_ALIGNMENT=${default_alignment}" + else + echo "No hard-wired alignment for target $target" 1>&6 + sim_alignment="-DWITH_ALIGNMENT=0" + fi + fi;; + no) if test x"$default_alignment" != x; then + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}" + else + if test x"$wire_alignment" != x; then + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}" + else + echo "No default alignment for target $target" 1>&6 + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0" + fi + fi;; + *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";; +esac +if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then + echo "Setting alignment flags = $sim_alignment" 6>&1 +fi +else + if test x"$default_alignment" != x; then + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}" +else + if test x"$wire_alignment" != x; then + sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}" + else + sim_alignment= + fi +fi +fi + + +# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given. +if test "${enable_sim_hostendian+set}" = set; then + enableval="$enable_sim_hostendian" + case "${enableval}" in + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + *) { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";; +esac +if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then + echo "Setting hostendian flags = $sim_hostendian" 6>&1 +fi +else + +if test "x$cross_compiling" = "xno"; then + echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 +echo "configure:3535: checking whether byte ordering is bigendian" >&5 +if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_c_bigendian=unknown +# See if sys/param.h defines the BYTE_ORDER macro. +cat > conftest.$ac_ext < +#include +int main() { + +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif +; return 0; } +EOF +if { (eval echo configure:3553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + # It does; now see whether it defined to BIG_ENDIAN or not. +cat > conftest.$ac_ext < +#include +int main() { + +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif +; return 0; } +EOF +if { (eval echo configure:3568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_bigendian=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_c_bigendian=no +fi +rm -f conftest* +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +if test $ac_cv_c_bigendian = unknown; then +if test "$cross_compiling" = yes; then + { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + ac_cv_c_bigendian=no +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_c_bigendian=yes +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_c_bigendian" 1>&6 +if test $ac_cv_c_bigendian = yes; then + cat >> confdefs.h <<\EOF +#define WORDS_BIGENDIAN 1 +EOF + +fi + + if test $ac_cv_c_bigendian = yes; then + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + else + sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + fi +else + sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" +fi +fi + + +default_sim_default_model="m32r/d" +# Check whether --enable-sim-default-model or --disable-sim-default-model was given. +if test "${enable_sim_default_model+set}" = set; then + enableval="$enable_sim_default_model" + case "${enableval}" in + yes|no) { echo "configure: error: "Missing argument to --enable-sim-default-model"" 1>&2; exit 1; };; + *) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";; +esac +if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then + echo "Setting default model = $sim_default_model" 6>&1 +fi +else + sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'" +fi + + + +# Check whether --enable-sim-environment or --disable-sim-environment was given. +if test "${enable_sim_environment+set}" = set; then + enableval="$enable_sim_environment" + case "${enableval}" in + all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";; + user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";; + virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";; + operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";; + *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-environment"" 1>&2; exit 1; }; + sim_environment="";; +esac +if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then + echo "Setting sim environment = $sim_environment" 6>&1 +fi +else + sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT" +fi + + +echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 +echo "configure:3672: checking for dlopen in -ldl" >&5 +ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo dl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set) 2>&1 | grep ac_space` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@sim_environment@%$sim_environment%g +s%@sim_alignment@%$sim_alignment%g +s%@sim_assert@%$sim_assert%g +s%@sim_bitsize@%$sim_bitsize%g +s%@sim_endian@%$sim_endian%g +s%@sim_hostendian@%$sim_hostendian%g +s%@sim_float@%$sim_float%g +s%@sim_scache@%$sim_scache%g +s%@sim_default_model@%$sim_default_model%g +s%@sim_hw_cflags@%$sim_hw_cflags%g +s%@sim_hw_objs@%$sim_hw_objs%g +s%@sim_hw@%$sim_hw%g +s%@sim_inline@%$sim_inline%g +s%@sim_packages@%$sim_packages%g +s%@sim_regparm@%$sim_regparm%g +s%@sim_reserved_bits@%$sim_reserved_bits%g +s%@sim_smp@%$sim_smp%g +s%@sim_stdcall@%$sim_stdcall%g +s%@sim_xor_endian@%$sim_xor_endian%g +s%@build_warnings@%$build_warnings%g +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@CC@%$CC%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g +s%@HDEFINES@%$HDEFINES%g +s%@AR@%$AR%g +s%@RANLIB@%$RANLIB%g +s%@SET_MAKE@%$SET_MAKE%g +s%@CPP@%$CPP%g +s%@ALLOCA@%$ALLOCA%g +s%@USE_NLS@%$USE_NLS%g +s%@MSGFMT@%$MSGFMT%g +s%@GMSGFMT@%$GMSGFMT%g +s%@XGETTEXT@%$XGETTEXT%g +s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g +s%@CATALOGS@%$CATALOGS%g +s%@CATOBJEXT@%$CATOBJEXT%g +s%@DATADIRNAME@%$DATADIRNAME%g +s%@GMOFILES@%$GMOFILES%g +s%@INSTOBJEXT@%$INSTOBJEXT%g +s%@INTLDEPS@%$INTLDEPS%g +s%@INTLLIBS@%$INTLLIBS%g +s%@INTLOBJS@%$INTLOBJS%g +s%@POFILES@%$POFILES%g +s%@POSUB@%$POSUB%g +s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g +s%@GT_NO@%$GT_NO%g +s%@GT_YES@%$GT_YES%g +s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g +s%@l@%$l%g +s%@MAINT@%$MAINT%g +s%@sim_bswap@%$sim_bswap%g +s%@sim_cflags@%$sim_cflags%g +s%@sim_debug@%$sim_debug%g +s%@sim_stdio@%$sim_stdio%g +s%@sim_trace@%$sim_trace%g +s%@sim_profile@%$sim_profile%g +s%@EXEEXT@%$EXEEXT%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +if test "${CONFIG_HEADERS+set}" != set; then +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +fi +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + cat $ac_file_inputs > conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + fi + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +srcdir=$ac_given_srcdir +while test -n "$ac_sources"; do + set $ac_dests; ac_dest=$1; shift; ac_dests=$* + set $ac_sources; ac_source=$1; shift; ac_sources=$* + + echo "linking $srcdir/$ac_source to $ac_dest" + + if test ! -r $srcdir/$ac_source; then + { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; } + fi + rm -f $ac_dest + + # Make relative symlinks. + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'` + if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then + # The dest file is in a subdirectory. + test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir" + ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dest_dir_suffix. + ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dest_dir_suffix= ac_dots= + fi + + case "$srcdir" in + [/$]*) ac_rel_source="$srcdir/$ac_source" ;; + *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;; + esac + + # Make a symlink if possible; otherwise try a hard link. + if ln -s $ac_rel_source $ac_dest 2>/dev/null || + ln $srcdir/$ac_source $ac_dest; then : + else + { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } + fi +done +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +case "x$CONFIG_FILES" in + xMakefile*) + echo "Merging Makefile.sim+Make-common.sim into Makefile ..." + rm -f Makesim1.tmp Makesim2.tmp Makefile + sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' Makesim1.tmp + sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' Makesim2.tmp + sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \ + -e '/^## COMMON_POST_/ r Makesim2.tmp' \ + Makefile + rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp + ;; + esac + case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + + + + + diff --git a/sim/m32r-gx/configure.in b/sim/m32r-gx/configure.in new file mode 100644 index 00000000000..ce1851bb4eb --- /dev/null +++ b/sim/m32r-gx/configure.in @@ -0,0 +1,26 @@ +dnl Process this file with autoconf to produce a configure script. +sinclude(../common/aclocal.m4) +AC_PREREQ(2.5)dnl +AC_INIT(Makefile.in) + + +SIM_AC_COMMON + +program_transform_name="s,^,${program_prefix}gx-," +target_alias="${target_alias}-gx" + +sim_link_files="${sim_link_files} m32r-sim.h ../../opcodes/m32r-opc.h" +sim_link_links="${sim_link_links} cpu-sim.h cpu-opc.h" + +SIM_AC_OPTION_ENDIAN(BIG_ENDIAN) +SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) +SIM_AC_OPTION_HOSTENDIAN +SIM_AC_OPTION_DEFAULT_MODEL(m32r/d) +SIM_AC_OPTION_ENVIRONMENT + +AC_CHECK_LIB(dl, dlopen) + +SIM_AC_OUTPUT + + + diff --git a/sim/m32r-gx/cpuall.h b/sim/m32r-gx/cpuall.h new file mode 100644 index 00000000000..11213e3f57d --- /dev/null +++ b/sim/m32r-gx/cpuall.h @@ -0,0 +1,2 @@ +#include "sim-cpu.h" +#include "sim-model.h" diff --git a/sim/m32r-gx/gx-translate.c b/sim/m32r-gx/gx-translate.c new file mode 100644 index 00000000000..0a43477b852 --- /dev/null +++ b/sim/m32r-gx/gx-translate.c @@ -0,0 +1,1038 @@ +/* GX M32R implementation. + Copyright (C) 1998 Cygnus Solutions. +*/ + +#include +#include +#include + +/* common simulator framework */ +#include "sim-main.h" +#include "sim-base.h" +#include "sim-core.h" +#include "sim-gx.h" +#include "sim-assert.h" +#include "targ-vals.h" + + +/* internal functions */ +void m32r_emit_long_insn(sim_gx_block* block, PCADDR pc, unsigned insn, int optimized); +void m32r_emit_short_insn(sim_gx_block* block, PCADDR pc, unsigned insn, int optimized); + +/* callback functions */ +unsigned m32r_gx_load(unsigned pc, unsigned addr); +void m32r_gx_store(unsigned pc, unsigned addr, unsigned data); +signed char m32r_gx_load1(unsigned pc, unsigned addr); +void m32r_gx_store1(unsigned pc, unsigned addr, signed char data); +signed short m32r_gx_load2(unsigned pc, unsigned addr); +void m32r_gx_store2(unsigned pc, unsigned addr, signed short data); +void m32r_gx_syscall(tgx_syscall_data* data); + + + +/* external functions */ + +void +tgx_block_ctor(sim_gx_block* block, sim_cia cia) +{ + /* pick translation boundaries */ + unsigned_4 origin, length, divisor; + +#define GX_PAGE_SIZE 4096 + origin = (cia / GX_PAGE_SIZE) * GX_PAGE_SIZE; + length = GX_PAGE_SIZE; + + /* fill in general target-dependent fields */ + divisor = 4; /* m32r instruction-pairs occur on word boundaries */ + + tgx_block_ctor2(block, origin, length, divisor); +} + + +void +tgx_block_ctor2(sim_gx_block* block, unsigned_4 origin, + unsigned_4 length, unsigned_4 divisor) +{ + block->origin = origin; + block->length = length; + block->divisor = divisor; + + /* allocate pc_flags array */ + block->pc_flags = zalloc(block->length / block->divisor); + + /* allocate tgx_callbacks */ + block->callbacks = zalloc(sizeof(tgx_callbacks)); + block->callbacks->load = m32r_gx_load; + block->callbacks->store = m32r_gx_store; + block->callbacks->load1 = m32r_gx_load1; + block->callbacks->store1 = m32r_gx_store1; + block->callbacks->load2 = m32r_gx_load2; + block->callbacks->store2 = m32r_gx_store2; + block->callbacks->syscall = m32r_gx_syscall; +} + + + +void +tgx_emit_pre_function(sim_gx_block* gx, int optimized) +{ + sim_gx_compiled_block* block = optimized ? gx->optimized_block : gx->learning_block; + ASSERT(block->source_file != NULL); + + fprintf(block->source_file, "\n"); + fprintf(block->source_file, "#include \n"); + fprintf(block->source_file, "\n"); + fprintf(block->source_file, /* match with definition in sim-main.h! */ + "typedef struct tgx_cpu_regs\n" + "{\n" + " unsigned int h_pc; /* program counter */\n" + " signed int h_gr[16]; /* general registers */\n" + " unsigned int h_cr[16]; /* control registers */\n" + " long long h_accum; /* accumulator */\n" + " unsigned h_lock; /* lock */\n" + "} tgx_cpu_regs;\n"); + + fprintf(block->source_file, /* match with definition in sim-main.h! */ + "typedef struct tgx_syscall_data\n" + "{\n" + " unsigned pc;\n" + " unsigned func;\n" + " unsigned arg1;\n" + " unsigned arg2;\n" + " unsigned arg3;\n" + " unsigned errcode;\n" + " unsigned result;\n" + " unsigned result2;\n" + "} tgx_syscall_data;\n"); + + fprintf(block->source_file, /* match with definition in sim-main.h! */ + "typedef struct tgx_callbacks\n" + "{\n" + " unsigned (*load)(unsigned pc, unsigned addr);\n" + " void (*store)(unsigned pc, unsigned addr, unsigned data);\n" + " signed char (*load1)(unsigned pc, unsigned addr);\n" + " void (*store1)(unsigned pc, unsigned addr, signed char data);\n" + " signed short (*load2)(unsigned pc, unsigned addr);\n" + " void (*store2)(unsigned pc, unsigned addr, signed short data);\n" + " void (*syscall)(tgx_syscall_data* data);\n" + "} tgx_callbacks;\n"); +} + + +void +tgx_emit_load_block(sim_gx_block* gx, int optimized) +{ + sim_gx_compiled_block* block = + optimized ? gx->optimized_block : gx->learning_block; + + ASSERT(block->source_file != NULL); + fprintf(block->source_file, /* match with definition above */ + " unsigned int pc = regs->h_pc;\n" + " unsigned int npc = pc;\n" + " signed int temp;\n" + " signed int gr0 = regs->h_gr[0], gr1 = regs->h_gr[1];\n" + " signed int gr2 = regs->h_gr[2], gr3 = regs->h_gr[3];\n" + " signed int gr4 = regs->h_gr[4], gr5 = regs->h_gr[5];\n" + " signed int gr6 = regs->h_gr[6], gr7 = regs->h_gr[7];\n" + " signed int gr8 = regs->h_gr[8], gr9 = regs->h_gr[9];\n" + " signed int gr10 = regs->h_gr[10], gr11 = regs->h_gr[11];\n" + " signed int gr12 = regs->h_gr[12], gr13 = regs->h_gr[13];\n" + " signed int gr14 = regs->h_gr[14];\n" + " unsigned int cr0 = regs->h_cr[0], cr1 = regs->h_cr[1];\n" + " unsigned int cr2 = regs->h_cr[2], cr3 = regs->h_cr[3];\n" + " unsigned int cr4 = regs->h_cr[4], cr5 = regs->h_cr[5];\n" + " unsigned int cr6 = regs->h_cr[6], cr7 = regs->h_cr[7];\n" + " unsigned int cr8 = regs->h_cr[8], cr9 = regs->h_cr[9];\n" + " unsigned int cr10 = regs->h_cr[10], cr11 = regs->h_cr[11];\n" + " unsigned int cr12 = regs->h_cr[12], cr13 = regs->h_cr[13];\n" + " unsigned int cr14 = regs->h_cr[14], cr15 = regs->h_cr[15];\n" + " long long accum = regs->h_accum;\n" + " unsigned cond = cr0 & 0x01;\n" + " unsigned sm = cr0 & 0x80;\n" + " unsigned int gr15 = sm ? cr3 : cr2;\n" + " unsigned lock = regs->h_lock;\n"); +} + + + +sim_cia +tgx_emit_insn(sim_gx_block* gx, sim_cia cia, int optimized) +{ + PCADDR pc = cia; + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + USI insn = sim_core_read_unaligned_4 (cpu, NULL_CIA, exec_map, cia); + USI insn1 = (insn >> 16) & 0xffff; + USI insn2 = insn & 0xffff; + sim_gx_compiled_block* block = + optimized ? gx->optimized_block : gx->learning_block; + + ASSERT(block->source_file != NULL); + + /* classify instruction word */ + if (insn & 0x80000000) /* single long word */ + m32r_emit_long_insn(gx, pc, insn, optimized); + else /* two sequential half words */ + { + /* translate first instruction */ + m32r_emit_short_insn(gx, pc, insn1, optimized); + + if(insn2 & 0x8000) /* parallel? */ + { + fprintf(block->source_file, " /* || */\n"); + insn2 &= 0x7fff; + /* XXX: genuine parallelism handling */ + } + else + fprintf(block->source_file, " /* -> */\n"); + + /* translate second instruction */ + m32r_emit_short_insn(gx, pc + 2, insn2, optimized); + } + + return cia + 4; /* next instruction pair */ +} + + +void +tgx_emit_save_block(sim_gx_block* gx, int optimized) +{ + sim_gx_compiled_block* block = + optimized ? gx->optimized_block : gx->learning_block; + + ASSERT(block->source_file != NULL); + fprintf(block->source_file, /* match with definition above */ + " cr0 = (cr0 & 0x00c140) | (sm ? 0x80 : 0 ) | (cond ? 1 : 0);\n" + " cr1 = cond ? 1 : 0;\n" + " cr2 = sm ? cr2 : gr15;\n" + " cr3 = sm ? gr15 : cr3;\n" + " regs->h_pc = npc;\n" + " regs->h_gr[0] = gr0, regs->h_gr[1] = gr1;\n" + " regs->h_gr[2] = gr2, regs->h_gr[3] = gr3;\n" + " regs->h_gr[4] = gr4, regs->h_gr[5] = gr5;\n" + " regs->h_gr[6] = gr6, regs->h_gr[7] = gr7;\n" + " regs->h_gr[8] = gr8, regs->h_gr[9] = gr9;\n" + " regs->h_gr[10] = gr10, regs->h_gr[11] = gr11;\n" + " regs->h_gr[12] = gr12, regs->h_gr[13] = gr13;\n" + " regs->h_gr[14] = gr14, regs->h_gr[15] = gr15;\n" + " regs->h_cr[0] = cr0, regs->h_cr[1] = cr1;\n" + " regs->h_cr[2] = cr2, regs->h_cr[3] = cr3;\n" + " regs->h_cr[4] = cr4, regs->h_cr[5] = cr5;\n" + " regs->h_cr[6] = cr6, regs->h_cr[7] = cr7;\n" + " regs->h_cr[8] = cr8, regs->h_cr[9] = cr9;\n" + " regs->h_cr[10] = cr10, regs->h_cr[11] = cr11;\n" + " regs->h_cr[12] = cr12, regs->h_cr[13] = cr13;\n" + " regs->h_cr[14] = cr14, regs->h_cr[15] = cr15;\n" + " regs->h_accum = accum;\n" + " regs->h_lock = lock;\n"); +} + + +void +tgx_emit_post_function(sim_gx_block* gx, int optimized) +{ + sim_gx_compiled_block* block = + optimized ? gx->optimized_block : gx->learning_block; + + ASSERT(block->source_file != NULL); + fprintf(block->source_file, "\n/* end of file */\n"); +} + + +void +tgx_block_dtor(sim_gx_block* block) +{ +} + + + +int +tgx_optimize_test(sim_gx_block* block) +{ + unsigned_4 current_time = time(NULL); + unsigned_4 constant_time = current_time - block->learn_last_change; + int opt; + + /* try another optimize run if the system has settled down */ + opt = (block->compile_time != 0 + && block->learn_last_change != 0 + && constant_time > block->compile_time); + + /* + if(opt) + printf("optimize_test: now: %d, chg: %d, comp: %d, count: %d => opt %d\n", + current_time, block->learn_last_change, block->compile_time, + block->opt_compile_count, opt); + + */ + + return opt; +} + + +unsigned +m32r_gx_load(unsigned pc, unsigned addr) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + + USI data = sim_core_read_unaligned_4 (cpu, pc, read_map, addr); + return data; +} + + +void +m32r_gx_store(unsigned pc, unsigned addr, unsigned data) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + + sim_core_write_unaligned_4 (cpu, pc, write_map, addr, data); +} + + +signed char +m32r_gx_load1(unsigned pc, unsigned addr) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + + signed char data = sim_core_read_unaligned_1 (cpu, pc, read_map, addr); + return data; +} + + +void +m32r_gx_store1(unsigned pc, unsigned addr, signed char data) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + + sim_core_write_unaligned_1 (cpu, pc, write_map, addr, data); +} + + +signed short +m32r_gx_load2(unsigned pc, unsigned addr) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + + signed short data = sim_core_read_unaligned_2 (cpu, pc, read_map, addr); + return data; +} + + +void +m32r_gx_store2(unsigned pc, unsigned addr, signed short data) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + + sim_core_write_unaligned_2 (cpu, pc, write_map, addr, data); +} + + +static int +syscall_read_mem (host_callback *cb, struct cb_syscall *sc, + unsigned long taddr, char *buf, int bytes) +{ + SIM_DESC sd = (SIM_DESC) sc->p1; + SIM_CPU *cpu = (SIM_CPU *) sc->p2; + + return sim_core_read_buffer (sd, cpu, read_map, buf, taddr, bytes); +} + + +static int +syscall_write_mem (host_callback *cb, struct cb_syscall *sc, + unsigned long taddr, const char *buf, int bytes) +{ + SIM_DESC sd = (SIM_DESC) sc->p1; + SIM_CPU *cpu = (SIM_CPU *) sc->p2; + + return sim_core_write_buffer (sd, cpu, write_map, buf, taddr, bytes); +} + + +void +m32r_gx_syscall(tgx_syscall_data* data) +{ + SIM_DESC sd = CURRENT_STATE; + sim_cpu* cpu = STATE_CPU (sd, 0); + host_callback *cb = STATE_CALLBACK (sd); + CB_SYSCALL s; + + CB_SYSCALL_INIT (&s); + s.func = data->func; + s.arg1 = data->arg1; + s.arg2 = data->arg2; + s.arg3 = data->arg3; + + if (s.func == TARGET_SYS_exit) + { + sim_engine_halt (sd, cpu, NULL, data->pc, sim_exited, s.arg1); + exit(s.arg1); + } + + s.p1 = (PTR) sd; + s.p2 = (PTR) cpu; + s.read_mem = syscall_read_mem; + s.write_mem = syscall_write_mem; + cb_syscall (cb, &s); + + data->errcode = s.errcode; + data->result = s.result; + data->result2 = s.result2; +} + + + +void +m32r_emit_long_insn(sim_gx_block* gx, PCADDR pc, unsigned insn, int optimized) +{ + int op1 = (insn & 0xf0000000) >> 28; + int r1 = (insn & 0x0f000000) >> 24; + int op2 = (insn & 0x00f00000) >> 20; + int r2 = (insn & 0x000f0000) >> 16; + short lit2 = (insn & 0x0000ffff); + int lit3 = (insn & 0x00ffffff); + sim_gx_compiled_block* block = optimized ? gx->optimized_block : gx->learning_block; + FILE* f = block->source_file; + + ASSERT(block->source_file != NULL); + + if(op1 == 0x8 && op2 == 0x4 && r1 == 0) + { + fprintf(f, " /* CMPI R%d,#%d */\n", r2, lit2); + fprintf(f, " cond = (gr%d < %d);\n", r2, lit2); + } + else if(op1 == 0x8 && op2 == 0x5 && r1 == 0) + { + fprintf(f, " /* CMPUI R%d,#%d */\n", r2, lit2); + fprintf(f, " cond = ((unsigned) gr%d < %u);\n", r2, (unsigned)((int) lit2)); + } + else if(op1 == 0x8 && op2 == 0x8) + { + fprintf(f, " /* ADDV3 R%d,R%d,#%d */\n", r1, r2, lit2); + fprintf(f, " temp = gr%d + %d;\n", r2, lit2); + fprintf(f, " cond = (~(gr%d & %d) & (gr%d ^ temp)) & (1<<31);\n", r2, lit2, r2); + fprintf(f, " gr%d = temp;\n", r1); + } + else if(op1 == 0x8 && op2 == 0xa) + { + fprintf(f, " /* ADD3 R%d,R%d,#%d */\n", r1, r2, lit2); + fprintf(f, " gr%d = gr%d + %d;\n", r1, r2, lit2); + } + else if(op1 == 0x8 && op2 == 0xc) + { + fprintf(f, " /* AND3 R%d,R%d,#%u */\n", r1, r2, (unsigned short) lit2); + fprintf(f, " gr%d = gr%d & %u;\n", r1, r2, (unsigned short) lit2); + } + else if(op1 == 0x8 && op2 == 0xd) + { + fprintf(f, " /* XOR3 R%d,R%d,#%d */\n", r1, r2, lit2); + fprintf(f, " gr%d = gr%d ^ %d;\n", r1, r2, lit2); + } + else if(op1 == 0x8 && op2 == 0xe) + { + fprintf(f, " /* OR3 R%d,R%d,#%u */\n", r1, r2, (unsigned short) lit2); + fprintf(f, " gr%d = gr%d | %u;\n", r1, r2, (unsigned short) lit2); + } + + else if(op1 == 0x9 && op2 == 0x0 && lit2 == 0) + { + fprintf(f, " /* DIV R%d,R%d */\n", r1, r2); + fprintf(f, " if(gr%d != 0)\n", r2); + fprintf(f, " gr%d = gr%d / gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x9 && op2 == 0x1 && lit2 == 0) + { + fprintf(f, " /* DIVU R%d,R%d */\n", r1, r2); + fprintf(f, " if(gr%d != 0)\n", r2); + fprintf(f, " gr%d = (unsigned) gr%d / (unsigned) gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x9 && op2 == 0x2 && lit2 == 0) + { + fprintf(f, " /* REM R%d,R%d */\n", r1, r2); + fprintf(f, " if(gr%d != 0)\n", r2); + fprintf(f, " gr%d = gr%d %% gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x9 && op2 == 0x3 && lit2 == 0) + { + fprintf(f, " /* REMU R%d,R%d */\n", r1, r2); + fprintf(f, " if(gr%d != 0)\n", r2); + fprintf(f, " gr%d = (unsigned) gr%d %% (unsigned) gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x9 && op2 == 0x8) + { + fprintf(f, " /* SRL3 R%d,R%d,#%d */\n", r1, r2, lit2); + fprintf(f, " gr%d = (unsigned) gr%d >> %d;\n", r1, r2, (lit2 & 0x1f)); + } + else if(op1 == 0x9 && op2 == 0xa) + { + fprintf(f, " /* SRA3 R%d,R%d,#%d */\n", r1, r2, lit2); + fprintf(f, " gr%d = gr%d >> %d;\n", r1, r2, (lit2 & 0x1f)); + } + else if(op1 == 0x9 && op2 == 0xc) + { + fprintf(f, " /* SLL3 R%d,R%d,#%d */\n", r1, r2, lit2); + fprintf(f, " gr%d = gr%d << %d;\n", r1, r2, (lit2 & 0x1f)); + } + else if(op1 == 0x9 && op2 == 0xf && r2 == 0) + { + fprintf(f, " /* LDI R%d,#%d */\n", r1, lit2); + fprintf(f, " gr%d = %d;\n", r1, lit2); + } + + else if(op1 == 0xa && op2 == 0x0) + { + fprintf(f, " /* STB R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " (*(callbacks->store1))(0x%08x, gr%d + %d, gr%d & 0xff);\n", (unsigned)pc, r2, lit2, r1); + } + else if(op1 == 0xa && op2 == 0x2) + { + fprintf(f, " /* STH R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " (*(callbacks->store2))(0x%08x, gr%d + %d, gr%d & 0xffff);\n", (unsigned)pc, r2, lit2, r1); + } + else if(op1 == 0xa && op2 == 0x4) + { + fprintf(f, " /* ST R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " (*(callbacks->store))(0x%08x, gr%d + %d, gr%d);\n", (unsigned)pc, r2, lit2, r1); + } + else if(op1 == 0xa && op2 == 0x8) + { + fprintf(f, " /* LDB R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " gr%d = (*(callbacks->load1))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2); + } + else if(op1 == 0xa && op2 == 0x9) + { + fprintf(f, " /* LDUB R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " gr%d = (unsigned char)(*(callbacks->load1))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2); + } + else if(op1 == 0xa && op2 == 0xa) + { + fprintf(f, " /* LDH R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " gr%d = (*(callbacks->load2))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2); + } + else if(op1 == 0xa && op2 == 0xb) + { + fprintf(f, " /* LDUH R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " gr%d = (unsigned short)(*(callbacks->load2))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2); + } + else if(op1 == 0xa && op2 == 0xc) + { + fprintf(f, " /* LD R%d,@(%d,R%d) */\n", r1, lit2, r2); + fprintf(f, " gr%d = (*(callbacks->load))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2); + } + + else if(op1 == 0xb && op2 == 0x0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BEQ R%d,R%d,%d */\n", r1, r2, lit2); + fprintf(f, " if (gr%d == gr%d)\n", r1, r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0x1) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BNE R%d,R%d,%d */\n", r1, r2, lit2); + fprintf(f, " if (gr%d != gr%d)\n", r1, r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0x8 && r1 == 0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BEQZ R%d,%d */\n", r2, lit2); + fprintf(f, " if (gr%d == 0)\n", r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0x9 && r1 == 0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BNEZ R%d,%d */\n", r2, lit2); + fprintf(f, " if (gr%d != 0)\n", r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0xa && r1 == 0x0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BLTZ R%d,%d */\n", r2, lit2); + fprintf(f, " if (gr%d < 0)\n", r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0xb && r1 == 0x0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BGEZ R%d,%d */\n", r2, lit2); + fprintf(f, " if (gr%d >= 0)\n", r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0xc && r1 == 0x0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BLEZ R%d,%d */\n", r2, lit2); + fprintf(f, " if (gr%d <= 0)\n", r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xb && op2 == 0xd && r1 == 0x0) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2); + fprintf(f, " /* BGTZ R%d,%d */\n", r2, lit2); + fprintf(f, " if (gr%d > 0)\n", r2); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + + else if(op1 == 0xd && op2 == 0xc && r2 == 0) + { + fprintf(f, " /* SETH R%d,#%d */\n", r1, lit2); + fprintf(f, " gr%d = 0x%08x;\n", r1, (lit2 << 16)); + } + + else if(op1 == 0xe) + { + fprintf(f, " /* LD24 R%d,#%d */\n", r1, lit3); + fprintf(f, " gr%d = 0x%08x;\n", r1, lit3); + } + + else if(op1 == 0xf && r1 == 0xc) + { + unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2); + fprintf(f, " /* BC %d */\n", lit3); + fprintf(f, " if (cond)\n"); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xf && r1 == 0xd) + { + unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2); + fprintf(f, " /* BNC %d */\n", lit3); + fprintf(f, " if (! cond)\n"); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0xf && r1 == 0xe) + { + unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2); + unsigned retpc = (pc & 0xfffffffc) + 4; + fprintf(f, " /* BL %d */\n", lit3); + fprintf(f, " gr14 = 0x%08x;\n", retpc); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + } + else if(op1 == 0xf && r1 == 0xf) + { + unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2); + fprintf(f, " /* BRA %d */\n", lit3); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + } + + else + { + /* illegal instruction */ + /* XXX */ + fprintf(f, " printf(\"ILLEGAL INSN 0x%08x @ PC 0x%08x\\n\");\n", insn, (unsigned)pc); + fprintf(f, " abort();\n"); + } +} + + +void +m32r_emit_short_insn(sim_gx_block* gx, PCADDR pc, unsigned insn, int optimized) +{ + int op1 = (insn & 0xf000) >> 12; + int r1 = (insn & 0x0f00) >> 8; + int op2 = (insn & 0x00f0) >> 4; + int op2part = (insn & 0x00e0) >> 5; + int r2 = (insn & 0x000f); + signed char c = (insn & 0x00ff); + signed char c5 = (insn & 0x001f); + sim_gx_compiled_block* block = optimized ? gx->optimized_block : gx->learning_block; + FILE* f = block->source_file; + + ASSERT(f != NULL); + + if(0) + ; /* place holder */ + else if(op1 == 0x0 && op2 == 0x0) + { + fprintf(f, " /* SUBV R%d,R%d */\n", r1, r2); + fprintf(f, " temp = gr%d - gr%d;\n", r1, r2); + fprintf(f, " cond = (unsigned) gr%d < (unsigned) gr%d;\n", r1, r2); + fprintf(f, " gr%d = temp;\n", r1); + } + else if(op1 == 0x0 && op2 == 0x1) + { + fprintf(f, " /* SUBX R%d,R%d */\n", r1, r2); + fprintf(f, " temp = gr%d - gr%d - (cond ? 1:0);\n", r1, r2); + fprintf(f, " cond = (unsigned) gr%d < (unsigned) gr%d;\n", r1, r2); + fprintf(f, " gr%d = temp;\n", r1); + } + else if(op1 == 0x0 && op2 == 0x2) + { + fprintf(f, " /* SUB R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d - gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x0 && op2 == 0x3) + { + fprintf(f, " /* NEG R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = 0 - gr%d;\n", r1, r2); + } + else if(op1 == 0x0 && op2 == 0x4) + { + fprintf(f, " /* CMP R%d,R%d */\n", r1, r2); + fprintf(f, " cond = (gr%d < gr%d);\n", r1, r2); + } + else if(op1 == 0x0 && op2 == 0x5) + { + fprintf(f, " /* CMPU R%d,R%d */\n", r1, r2); + fprintf(f, " cond = ((unsigned) gr%d < (unsigned) gr%d);\n", r1, r2); + } + else if(op1 == 0x0 && op2 == 0x8) + { + fprintf(f, " /* ADDV R%d,R%d */\n", r1, r2); + fprintf(f, " temp = gr%d + gr%d;\n", r1, r2); + fprintf(f, " cond = ((gr%d & gr%d) | (gr%d & ~temp) | (gr%d & ~temp)) & (1<<31);\n", r1, r2, r1, r2); + fprintf(f, " cond = (gr%d ^ gr%d ^ temp ^ cond) & (1<<31);\n", r1, r2); + fprintf(f, " gr%d = temp;\n", r1); + } + else if(op1 == 0x0 && op2 == 0x9) + { + fprintf(f, " /* ADDX R%d,R%d */\n", r1, r2); + fprintf(f, " temp = gr%d + gr%d + (cond ? 1:0);\n", r1, r2); + fprintf(f, " cond = ((gr%d & gr%d) | (gr%d & ~temp) | (gr%d & ~temp)) & (1<<31);\n", r1, r2, r1, r2); + fprintf(f, " gr%d = temp;\n", r1); + } + else if(op1 == 0x0 && op2 == 0xa) + { + fprintf(f, " /* ADD R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d + gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x0 && op2 == 0xb) + { + fprintf(f, " /* NOT R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = ~ gr%d;\n", r1, r2); + } + else if(op1 == 0x0 && op2 == 0xc) + { + fprintf(f, " /* AND R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d & gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x0 && op2 == 0xd) + { + fprintf(f, " /* XOR R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d ^ gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x0 && op2 == 0xe) + { + fprintf(f, " /* OR R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d | gr%d;\n", r1, r1, r2); + } + + else if(op1 == 0x1 && op2 == 0x0) + { + fprintf(f, " /* SRL R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = (unsigned) gr%d >> (gr%d & 0x1f);\n", r1, r1, r2); + } + else if(op1 == 0x1 && op2 == 0x2) + { + fprintf(f, " /* SRA R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d >> (gr%d & 0x1f);\n", r1, r1, r2); + } + else if(op1 == 0x1 && op2 == 0x4) + { + fprintf(f, " /* SLL R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d << (gr%d & 0x1f);\n", r1, r1, r2); + } + else if(op1 == 0x1 && op2 == 0x6) + { + fprintf(f, " /* MUL R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d * gr%d;\n", r1, r1, r2); + } + else if(op1 == 0x1 && op2 == 0x8) + { + fprintf(f, " /* MV R%d,R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d;\n", r1, r2); + } + else if(op1 == 0x1 && op2 == 0x9) + { + fprintf(f, " /* MVFC R%d,CR%d */\n", r1, r2); + if(r2 == 0) /* psw */ + fprintf(f, " gr%d = (cr0 & 0x00c140) | (sm ? 0x80 : 0 ) | (cond ? 1 : 0);\n", r1); + else if(r2 == 1) /* cbr */ + fprintf(f, " gr%d = (cond ? 1 : 0);\n", r1); + else if(r2 == 2) /* spi */ + { + fprintf(f, " if (sm) gr%d = cr2;\n", r1); + fprintf(f, " else gr%d = gr15;\n", r1); + } + else if(r2 == 3) /* spu */ + { + fprintf(f, " if (!sm) gr%d = cr3;\n", r1); + fprintf(f, " else gr%d = gr15;\n", r1); + } + else + fprintf(f, " gr%d = cr%d;\n", r1, r2); + } + else if(op1 == 0x1 && op2 == 0xa) + { + fprintf(f, " /* MVTC R%d,CR%d */\n", r1, r2); + if(r2 == 0) /* psw */ + { + fprintf(f, " cr0 = gr%d & 0x0000c1c1;\n", r1); + fprintf(f, " cond = cr0 & 1;\n"); + fprintf(f, " cr2 = sm ? cr2 : gr15;\n"); + fprintf(f, " cr3 = sm ? gr15 : cr3;\n"); + fprintf(f, " sm = cr0 & 80;\n"); + fprintf(f, " gr15 = sm ? cr3 : cr2;\n"); + } + else if(r2 == 1) /* cbr */ + ; /* no effect */ + else if(r2 == 2) /* spi */ + { + fprintf(f, " if (sm) cr2 = gr%d;\n", r1); + fprintf(f, " else gr15 = gr%d;\n", r1); + } + else if(r2 == 3) /* spu */ + { + fprintf(f, " if (!sm) cr3 = gr%d;\n", r1); + fprintf(f, " else gr15 = gr%d;\n", r1); + } + else if(r2 == 6) /* bpc */ + fprintf(f, " cr6 = gr%d & 0xfffffffe;\n", r1); + else + fprintf(f, " cr%d = gr%d;\n", r1, r2); + } + else if(op1 == 0x1 && op2 == 0xc && r1 == 0xe) + { + fprintf(f, " /* JL R%d */\n", r2); + fprintf(f, " gr14 = (0x%08x & 0xfffffffc) + 4;\n", (unsigned)pc); + fprintf(f, " npc = gr%d & 0xfffffffc;\n", r2); + fprintf(f, " goto unknownjump;\n"); + } + else if(op1 == 0x1 && op2 == 0xc && r1 == 0xf) + { + fprintf(f, " /* JMP R%d */\n", r2); + fprintf(f, " npc = gr%d & 0xfffffffc;\n", r2); + fprintf(f, " goto unknownjump;\n"); + } + else if(op1 == 0x1 && op2 == 0xd && r1 == 0x0 && r2 == 0x6) + { + fprintf(f, " /* RTE */\n"); + fprintf(f, " cr0 = (cr0 & 0xff00) | (cr0 >> 8);\n"); + fprintf(f, " cond = cr0 & 0x01;\n"); + fprintf(f, " sm = cr0 & 0x80;\n"); + fprintf(f, " gr15 = sm ? cr3 : cr2;\n"); + fprintf(f, " npc = cr6 & 0xfffffffc;\n"); + fprintf(f, " goto unknownjump;\n"); + } + else if(op1 == 0x1 && op2 == 0xf) + { + fprintf(f, " /* TRAP #%d */\n", r2); + if (r2 == TRAP_SYSCALL) /* general syscall ABI */ + { + fprintf(f, " {\n"); + fprintf(f, " tgx_syscall_data d = { 0x%08x, gr0, gr1, gr2, gr3 };\n", (unsigned) pc); + fprintf(f, " (*(callbacks->syscall))(&d);\n"); + fprintf(f, " gr2 = d.errcode;\n"); + fprintf(f, " gr1 = d.result;\n"); + fprintf(f, " gr0 = d.result2;\n"); + fprintf(f, " }\n"); + } + else if (r2 == 1) /* gdb breakpoint */ + { + fprintf(f, " rc = %d;\n", GX_F_HALT); + fprintf(f, " goto save;\n"); + } + else + { + fprintf(f, " cr6 = 0x%08x;\n", (unsigned)(pc + 4)); + fprintf(f, " cr0 = (cr0 & 0x000040) | (sm ? 0x80 : 0 ) | (cond ? 1 : 0);\n"); + fprintf(f, " cr0 = (cr0 & 0x0000ff) << 8 | (cr0 & 0x0000ff);\n"); + fprintf(f, " npc = 0x%08x;\n", 0x40 + (r2 * 4)); /* EIT_TRAP_BASE_ADDR */ + fprintf(f, " goto unknownjump;\n"); + } + } + + else if(op1 == 0x2 && op2 == 0x0) + { + fprintf(f, " /* STB R%d,@R%d */\n", r1, r2); + fprintf(f, " (*(callbacks->store1))(0x%08x, gr%d, gr%d & 0xff);\n", (unsigned)pc, r2, r1); + } + else if(op1 == 0x2 && op2 == 0x2) + { + fprintf(f, " /* STH R%d,@R%d */\n", r1, r2); + fprintf(f, " (*(callbacks->store2))(0x%08x, gr%d, gr%d & 0x0000ffff);\n", (unsigned)pc, r2, r1); + } + else if(op1 == 0x2 && op2 == 0x4) + { + fprintf(f, " /* ST R%d,@R%d */\n", r1, r2); + fprintf(f, " (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1); + } + else if(op1 == 0x2 && op2 == 0x5) + { + fprintf(f, " /* UNLOCK R%d,@R%d */\n", r1, r2); + fprintf(f, " if(lock)\n"); + fprintf(f, " {\n"); + fprintf(f, " lock = 0;\n"); + fprintf(f, " (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1); + fprintf(f, " }\n"); + } + else if(op1 == 0x2 && op2 == 0x6) + { + fprintf(f, " /* ST R%d,@+R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d + 4;\n", r2, r2); + fprintf(f, " (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1); + } + else if(op1 == 0x2 && op2 == 0x7) + { + fprintf(f, " /* ST R%d,@-R%d */\n", r1, r2); + fprintf(f, " gr%d = gr%d - 4;\n", r2, r2); + fprintf(f, " (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1); + } + else if(op1 == 0x2 && op2 == 0x8) + { + fprintf(f, " /* LDB R%d,@R%d */\n", r1, r2); + fprintf(f, " gr%d = (*(callbacks->load1))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + } + else if(op1 == 0x2 && op2 == 0x9) + { + fprintf(f, " /* LDUB R%d,@R%d */\n", r1, r2); + fprintf(f, " gr%d = (unsigned char)(*(callbacks->load1))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + } + else if(op1 == 0x2 && op2 == 0xa) + { + fprintf(f, " /* LDH R%d,@R%d */\n", r1, r2); + fprintf(f, " gr%d = (*(callbacks->load2))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + } + else if(op1 == 0x2 && op2 == 0xb) + { + fprintf(f, " /* LDUH R%d,@R%d */\n", r1, r2); + fprintf(f, " gr%d = (unsigned short)(*(callbacks->load2))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + } + else if(op1 == 0x2 && op2 == 0xc) + { + fprintf(f, " /* LD R%d,@R%d */\n", r1, r2); + fprintf(f, " gr%d = (*(callbacks->load))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + } + else if(op1 == 0x2 && op2 == 0xd) + { + fprintf(f, " /* LOCK R%d,@R%d */\n", r1, r2); + fprintf(f, " lock = 1;\n"); + fprintf(f, " gr%d = (*(callbacks->load))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + } + else if(op1 == 0x2 && op2 == 0xe) + { + fprintf(f, " /* LD R%d,@R%d+ */\n", r1, r2); + fprintf(f, " gr%d = (*(callbacks->load))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2); + fprintf(f, " gr%d = gr%d + 4;\n", r2, r2); + } + + else if(op1 == 0x4) + { + fprintf(f, " /* ADDI R%d,#%d */\n", r1, c); + fprintf(f, " gr%d = gr%d + %d;\n", r1, r1, c); + } + + else if(op1 == 0x5 && op2part == 0x0) + { + fprintf(f, " /* SRLI R%d,#%d */\n", r1, c5); + fprintf(f, " gr%d = ((unsigned) gr%d) >> %d;\n", r1, r1, c5); + } + else if(op1 == 0x5 && op2part == 0x1) + { + fprintf(f, " /* SRAI R%d,#%d */\n", r1, c5); + fprintf(f, " gr%d = gr%d >> %d;\n", r1, r1, c5); + } + else if(op1 == 0x5 && op2part == 0x2) + { + fprintf(f, " /* SRLI R%d,#%d */\n", r1, c5); + fprintf(f, " gr%d = gr%d << %d;\n", r1, r1, c5); + } + + else if(op1 == 0x6) + { + fprintf(f, " /* LDI R%d,#%d */\n", r1, c); + fprintf(f, " gr%d = 0x%08x;\n", r1, c); + } + + else if(op1 == 0x7 && r1 == 0xc) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2); + fprintf(f, " /* BC %d */\n", c); + fprintf(f, " if (cond)\n"); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0x7 && r1 == 0xd) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2); + fprintf(f, " /* BNC %d */\n", c); + fprintf(f, " if (! cond)\n"); + fprintf(f, " {\n"); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + fprintf(f, " }\n"); + } + else if(op1 == 0x7 && r1 == 0xe) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2); + unsigned retpc = (pc & 0xfffffffc) + 4; + fprintf(f, " /* BL %d */\n", c); + fprintf(f, " gr14 = 0x%08x;\n", retpc); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + } + else if(op1 == 0x7 && r1 == 0xf) + { + unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2); + fprintf(f, " /* BRA %d */\n", c); + fprintf(f, " npc = 0x%08x;\n", newpc); + fprintf(f, " goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump"); + } + + else if(op1 == 0x7 && op2 == 0x0 && r1 == 0x0 && r1 == 0x0) + { + fprintf(f, " /* NOP */\n"); + } + + else + { + /* illegal instruction */ + /* XXX */ + fprintf(f, " printf(\"ILLEGAL INSN 0x%04x @ PC 0x%08x\\n\");\n", insn, (unsigned) pc); + fprintf(f, " abort();\n"); + } +} + diff --git a/sim/m32r-gx/ltconfig b/sim/m32r-gx/ltconfig new file mode 100755 index 00000000000..ef2c23aa78f --- /dev/null +++ b/sim/m32r-gx/ltconfig @@ -0,0 +1,1715 @@ +#! /bin/sh + +# ltconfig - Create a system-specific libtool. +# Copyright (C) 1996-1998 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A lot of this script is taken from autoconf-2.10. + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} +echo=echo +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec "$SHELL" "$0" --no-reexec ${1+"$@"} +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi + +if test "X`($echo '\t') 2>/dev/null`" != 'X\t'; then + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH /usr/ucb; do + if test -f $dir/echo && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t'; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t'; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running ltconfig again with it. + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" != 'X\t'; then + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi +fi + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# The name of this program. +progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` + +# Constants: +PROGRAM=ltconfig +PACKAGE=libtool +VERSION=1.2b +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5' +rm="rm -f" + +help="Try \`$progname --help' for more information." + +# Global variables: +default_ofile=libtool +can_build_shared=yes +enable_shared=yes +# All known linkers require a `.a' archive for static linking. +enable_static=yes +ltmain= +silent= +srcdir= +ac_config_guess= +ac_config_sub= +host= +nonopt= +ofile="$default_ofile" +verify_host=yes +with_gcc=no +with_gnu_ld=no +objext=o +libext=a + +old_AR="$AR" +old_CC="$CC" +old_CFLAGS="$CFLAGS" +old_CPPFLAGS="$CPPFLAGS" +old_LD="$LD" +old_LN_S="$LN_S" +old_NM="$NM" +old_RANLIB="$RANLIB" +old_DLLTOOL="$DLLTOOL" +old_AS="$AS" + +# Parse the command line options. +args= +prev= +for option +do + case "$option" in + -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + eval "$prev=\$option" + prev= + continue + fi + + case "$option" in + --help) cat <&2 + echo "$help" 1>&2 + exit 1 + ;; + + *) + if test -z "$ltmain"; then + ltmain="$option" + elif test -z "$host"; then +# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 +# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then +# echo "$progname: warning \`$option' is not a valid host type" 1>&2 +# fi + host="$option" + else + echo "$progname: too many arguments" 1>&2 + echo "$help" 1>&2 + exit 1 + fi ;; + esac +done + +if test -z "$ltmain"; then + echo "$progname: you must specify a LTMAIN file" 1>&2 + echo "$help" 1>&2 + exit 1 +fi + +if test ! -f "$ltmain"; then + echo "$progname: \`$ltmain' does not exist" 1>&2 + echo "$help" 1>&2 + exit 1 +fi + +# Quote any args containing shell metacharacters. +ltconfig_args= +for arg +do + case "$arg" in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ltconfig_args="$ltconfig_args '$arg'" ;; + *) ltconfig_args="$ltconfig_args $arg" ;; + esac +done + +# A relevant subset of AC_INIT. + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 5 compiler messages saved in config.log +# 6 checking for... messages and results +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>>./config.log + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LANG+set}" = set; then LANG=C; export LANG; fi + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + +if test -z "$srcdir"; then + # Assume the source directory is the same one as the path to ltmain.sh. + srcdir=`$echo "$ltmain" | $Xsed -e 's%/[^/]*$%%'` + test "$srcdir" = "$ltmain" && srcdir=. +fi + +trap "$rm conftest*; exit 1" 1 2 15 +if test "$verify_host" = yes; then + # Check for config.guess and config.sub. + ac_aux_dir= + for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/config.guess; then + ac_aux_dir=$ac_dir + break + fi + done + if test -z "$ac_aux_dir"; then + echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 + echo "$help" 1>&2 + exit 1 + fi + ac_config_guess=$ac_aux_dir/config.guess + ac_config_sub=$ac_aux_dir/config.sub + + # Make sure we can run config.sub. + if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : + else + echo "$progname: cannot run $ac_config_sub" 1>&2 + echo "$help" 1>&2 + exit 1 + fi + + echo $ac_n "checking host system type""... $ac_c" 1>&6 + + host_alias=$host + case "$host_alias" in + "") + if host_alias=`$SHELL $ac_config_guess`; then : + else + echo "$progname: cannot guess host type; you must specify one" 1>&2 + echo "$help" 1>&2 + exit 1 + fi ;; + esac + host=`$SHELL $ac_config_sub $host_alias` + echo "$ac_t$host" 1>&6 + + # Make sure the host verified. + test -z "$host" && exit 1 + +elif test -z "$host"; then + echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 + echo "$help" 1>&2 + exit 1 +else + host_alias=$host +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case "$host_os" in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +esac + +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +case "$host_os" in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "${COLLECT_NAMES+set}" != set; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR cru $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +# Set a sane default for `AR'. +test -z "$AR" && AR=ar + +# If RANLIB is not set, then run the test. +if test "${RANLIB+set}" != "set"; then + result=no + + echo $ac_n "checking for ranlib... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/ranlib; then + RANLIB="ranlib" + result="ranlib" + break + fi + done + IFS="$save_ifs" + + echo "$ac_t$result" 1>&6 +fi + +if test -n "$RANLIB"; then + old_archive_cmds="$old_archive_cmds;\$RANLIB \$oldlib" + old_postinstall_cmds="\$RANLIB \$oldlib;$old_postinstall_cmds" +fi + +# Set sane defaults for `DLLTOOL' and `AS', used on cygwin32. +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$AS" && AS=as + +# Check to see if we are using GCC. +if test "$with_gcc" != yes || test -z "$CC"; then + # If CC is not set, then try to find GCC or a usable CC. + if test -z "$CC"; then + echo $ac_n "checking for gcc... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + IFS="$save_ifs" + test -z "$dir" && dir=. + if test -f $dir/gcc; then + CC="gcc" + break + fi + done + IFS="$save_ifs" + + if test -n "$CC"; then + echo "$ac_t$CC" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + fi + + # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". + if test -z "$CC"; then + echo $ac_n "checking for cc... $ac_c" 1>&6 + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + cc_rejected=no + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/cc; then + if test "$dir/cc" = "/usr/ucb/cc"; then + cc_rejected=yes + continue + fi + CC="cc" + break + fi + done + IFS="$save_ifs" + if test $cc_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same name, so the bogon will be chosen + # first if we set CC to just the name; use the full file name. + shift + set dummy "$dir/cc" "$@" + shift + CC="$@" + fi + fi + + if test -n "$CC"; then + echo "$ac_t$CC" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + + if test -z "$CC"; then + echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 + exit 1 + fi + fi + + # Now see if the compiler is really GCC. + with_gcc=no + echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 + echo "$progname:470: checking whether we are using GNU C" >&5 + + $rm conftest.c + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + with_gcc=yes + fi + $rm conftest.c + echo "$ac_t$with_gcc" 1>&6 +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="$2" + +echo $ac_n "checking for object suffix... $ac_c" 1>&6 +$rm conftest* +echo 'int i = 1;' > conftest.c +echo "$progname:492: checking for object suffix" >& 5 +if { (eval echo $progname:493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + cat conftest.err 1>&5 + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 +fi +$rm conftest* +echo "$ac_t$objext" 1>&6 + +echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 +pic_flag= +special_shlib_compile_flags= +wl= +link_static_flag= +no_builtin_flag= + +if test "$with_gcc" = yes; then + wl='-Wl,' + link_static_flag='-static' + no_builtin_flag=' -fno-builtin' + + case "$host_os" in + aix3* | aix4* | irix5* | irix6* | osf3* | osf4*) + # PIC is the default for these OSes. + ;; + cygwin32* | mingw32* | os2*) + # We can build DLLs from non-PIC. + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + pic_flag='-m68020 -resident32 -malways-restore-a4' + ;; + *) + pic_flag='-fPIC' + ;; + esac +else + # PORTME Check for PIC flags for the system compiler. + case "$host_os" in + aix3* | aix4*) + # All AIX code is PIC. + link_static_flag='-bnso -bI:/lib/syscalls.exp' + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better link_static_flag that works with the bundled CC? + wl='-Wl,' + link_static_flag="${wl}-a ${wl}archive" + pic_flag='+Z' + ;; + + irix5* | irix6*) + wl='-Wl,' + link_static_flag='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin32* | mingw32* | os2*) + # We can build DLLs from non-PIC. + ;; + + osf3* | osf4*) + # All OSF/1 code is PIC. + wl='-Wl,' + link_static_flag='-non_shared' + ;; + + sco3.2v5*) + pic_flag='-Kpic' + link_static_flag='-dn' + special_shlib_compile_flags='-belf' + ;; + + solaris2*) + pic_flag='-KPIC' + link_static_flag='-Bstatic' + wl='-Wl,' + ;; + + sunos4*) + pic_flag='-PIC' + link_static_flag='-Bstatic' + wl='-Qoption ld ' + ;; + + sysv4.2uw2*) + pic_flag='-KPIC' + link_static_flag='-Bstatic' + wl='-Wl,' + ;; + + uts4*) + pic_flag='-pic' + link_static_flag='-Bstatic' + ;; + + *) + can_build_shared=no + ;; + esac +fi + +if test -n "$pic_flag"; then + echo "$ac_t$pic_flag" 1>&6 + + # Check to make sure the pic_flag actually works. + echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 + $rm conftest* + echo "int some_variable = 0;" > conftest.c + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $pic_flag -DPIC" + echo "$progname:615: checking if $compiler PIC flag $pic_flag works" >&5 + if { (eval echo $progname:616: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then + # Append any warnings to the config.log. + cat conftest.err 1>&5 + + # On HP-UX, both CC and GCC only warn that PIC is supported... then they + # create non-PIC objects. So, if there were any warnings, we assume that + # PIC is not supported. + if test -s conftest.err; then + echo "$ac_t"no 1>&6 + can_build_shared=no + pic_flag= + else + echo "$ac_t"yes 1>&6 + pic_flag=" $pic_flag" + fi + else + # Append any errors to the config.log. + cat conftest.err 1>&5 + can_build_shared=no + pic_flag= + echo "$ac_t"no 1>&6 + fi + CFLAGS="$save_CFLAGS" + $rm conftest* +else + echo "$ac_t"none 1>&6 +fi + +# Check for any special shared library compilation flags. +if test -n "$special_shlib_compile_flags"; then + echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 + if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : + else + echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 + can_build_shared=no + fi +fi + +echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 +$rm conftest* +echo 'main(){return(0);}' > conftest.c +save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $link_static_flag" +echo "$progname:659: checking if $compiler static flag $link_static_flag works" >&5 +if { (eval echo $progname:660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + echo "$ac_t$link_static_flag" 1>&6 +else + echo "$ac_t"none 1>&6 + link_static_flag= +fi +LDFLAGS="$save_LDFLAGS" +$rm conftest* + +if test -z "$LN_S"; then + # Check to see if we can use ln -s, or we need hard links. + echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 + $rm conftestdata + if ln -s X conftestdata 2>/dev/null; then + $rm conftestdata + LN_S="ln -s" + else + LN_S=ln + fi + if test "$LN_S" = "ln -s"; then + echo "$ac_t"yes 1>&6 + else + echo "$ac_t"no 1>&6 + fi +fi + +# Make sure LD is an absolute path. +if test -z "$LD"; then + ac_prog=ld + if test "$with_gcc" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 + echo "$progname:692: checking for ld used by GCC" >&5 + ac_prog=`($CC -print-prog-name=ld) 2>&5` + case "$ac_prog" in + # Accept absolute paths. + /* | [A-Za-z]:[/\\]*) + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we are not using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac + elif test "$with_gnu_ld" = yes; then + echo $ac_n "checking for GNU ld... $ac_c" 1>&6 + echo "$progname:710: checking for GNU ld" >&5 + else + echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 + echo "$progname:713: checking for non-GNU ld" >&5 + fi + + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog"; then + LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" + fi + + if test -n "$LD"; then + echo "$ac_t$LD" 1>&6 + else + echo "$ac_t"no 1>&6 + fi + + if test -z "$LD"; then + echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 + exit 1 + fi +fi + +# Check to see if it really is or is not GNU ld. +echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 +# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + with_gnu_ld=yes +else + with_gnu_ld=no +fi +echo "$ac_t$with_gnu_ld" 1>&6 + +# See if the linker supports building shared libraries. +echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 + +allow_undefined_flag= +no_undefined_flag= +archive_cmds= +old_archive_from_new_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +fix_srcfile_path= + +case "$host_os" in +aix3* | aix4*) + # On AIX, the GNU linker works like the native linker. + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + + # See if GNU ld supports shared libraries. + case "$host_os" in + amigaos*) + archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs' + hardcode_direct=yes + # The GNU linker will only hardcode -L options if -rpath is not + # used, but we will be using -rpath because we set + # hardcode_libdir_flag_spec below. + hardcode_minus_L=no + hardcode_shlibpath_var=no + ;; + + cygwin32* | mingw32*) + if test "$with_gcc" = yes; then + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + # Very, very bogus. + echo ' +#include + +struct _reent *_impure_ptr; +extern struct _reent *__imp_reent_data; +BOOL APIENTRY +__dll_entry (HINSTANCE hinst, DWORD reason, LPVOID reserved) +{ + _impure_ptr = __imp_reent_data; +} +' > libtool.c + archive_cmds='$CC -c '"`pwd`"'/libtool.c;echo EXPORTS > $soname-def;$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' >> $soname-def;$LD -s --base-file $soname-base --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD -s --base-file $soname-base $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$rm libtool.$objext $soname-base $soname-exp' + old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $soname-def --output-lib $objdir/$libname.a;$rm $soname-def' + else + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + with_gnu_ld=no + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib$libobjs`echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll;linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs' + fix_srcfile_path='`cygpath -w $srcfile`' + fi + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared ${wl}-soname $wl$soname -o $lib$libobjs' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes && test "$with_gnu_ld" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case "$host_os" in + aix3*) + allow_undefined_flag=unsupported + archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$LD -o $objdir/$soname$libobjs -bE:$lib.exp -T512 -H512 -bM:SRE;$AR cru $lib $objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$with_gcc" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4*) + allow_undefined_flag=unsupported + archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$CC -o $objdir/$soname$libobjs ${wl}-bE:$lib.exp ${wl}-bM:SRE ${wl}-bnoentry;$AR cru $lib $objdir/$soname' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + + amigaos*) + archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + + cygwin32* | mingw32*) + if test "$with_gcc" = yes; then + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + # Very, very bogus. + echo ' +#include + +struct _reent *_impure_ptr; +extern struct _reent *__imp_reent_data; +BOOL APIENTRY +__dll_entry (HINSTANCE hinst, DWORD reason, LPVOID reserved) +{ + _impure_ptr = __imp_reent_data; +} +' > libtool.c + archive_cmds='$CC -c '"`pwd`"'/libtool.c;echo EXPORTS > $soname-def;$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' >> $soname-def;$LD -s --base-file $soname-base --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD -s --base-file $soname-base $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$rm libtool.$objext $soname-base $soname-exp' + old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $soname-def --output-lib $objdir/$libname.a;$rm $soname-def' + else + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib$libobjs`echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll;linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs' + fix_srcfile_path='`cygpath -w $srcfile`' + fi + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib$libobjs /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib$libobjs' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3, at last, uses gcc -shared to do shared libraries. + freebsd3*) + archive_cmds='$CC -shared -o $lib$libobjs' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + ;; + + hpux9*) + archive_cmds='$rm $objdir/$soname;$LD -b +s +b $install_libdir -o $objdir/$soname$libobjs;mv $objdir/$soname $lib' + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10* | hpux11*) + archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib$libobjs' + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$with_gcc" = yes; then + archive_cmds='$CC -shared -o $lib ${wl}-soname ${wl}$soname ${wl}-set_version ${wl}$verstring$libobjs' + else + archive_cmds='$LD -shared -o $lib -soname $soname -set_version $verstring$libobjs' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + ;; + + netbsd*) + # Tested with NetBSD 1.2 ld + archive_cmds='$LD -Bshareable -o $lib$libobjs' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + openbsd*) + archive_cmds='$LD -Bshareable -o $lib$libobjs' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def;$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def;$echo DATA >> $objdir/$libname.def;$echo " SINGLE NONSHARED" >> $objdir/$libname.def;$echo EXPORTS >> $objdir/$libname.def;emxexp$libobjs >> $objdir/$libname.def;$CC -Zdll -Zcrtdll -o $lib$libobjs $objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' + ;; + + osf3* | osf4*) + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} -o $lib -soname $soname -set_version $verstring$libobjs$deplibs' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -o $lib$libobjs' + hardcode_direct=yes + ;; + + solaris2*) + no_undefined_flag=' -z text' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib$libobjs' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + + # Solaris 2 before 2.5 hardcodes -L paths. + case "$host_os" in + solaris2.[0-4]*) + hardcode_minus_L=yes + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib$libobjs' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + can_build_shared=no + ;; + esac +fi +echo "$ac_t$ld_shlibs" 1>&6 + +if test -z "$NM"; then + echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 + case "$NM" in + /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path. + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/nm; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + NM="$ac_dir/nm -B" + elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + NM="$ac_dir/nm -p" + else + NM="$ac_dir/nm" + fi + break + fi + done + IFS="$ac_save_ifs" + test -z "$NM" && NM=nm + ;; + esac + echo "$ac_t$NM" 1>&6 +fi + +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRSTU]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \1' + +# Define system-specific variables. +case "$host_os" in +aix*) + symcode='[BCDTU]' + ;; +cygwin32* | mingw32*) + sympat='_\([_A-Za-z][_A-Za-z0-9]*\)' + symxfrm='_\1 \1' + ;; +irix*) + # Cannot use undefined symbols on IRIX because inlined functions mess us up. + symcode='[BCDEGRST]' + ;; +solaris2*) + symcode='[BDTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[ABCDGISTUW]' +fi + +case "$host_os" in +cygwin32* | mingw32*) + # We do not want undefined symbols on cygwin32. The user must + # arrange to define them via -l arguments. + symcode='[ABCDGISTW]' + ;; +esac + +# Write the raw and C identifiers. +global_symbol_pipe="sed -n -e 's/^.* $symcode $sympat$/$symxfrm/p'" + +# Check to see that the pipe works correctly. +pipe_works=no +$rm conftest* +cat > conftest.c <&5 +if { (eval echo $progname:1146: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then + # Now try to grab the symbols. + nlist=conftest.nm + if { echo "$progname:1149: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then + + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + wcout=`wc "$nlist" 2>/dev/null` + count=`$echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` + (test "$count" -ge 0) 2>/dev/null || count=-1 + else + rm -f "$nlist"T + count=-1 + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + sed 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> conftest.c + + cat <> conftest.c +#if defined (__STDC__) && __STDC__ +# define __ptr_t void * +#else +# define __ptr_t char * +#endif + +/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ +int dld_preloaded_symbol_count = $count; + +/* The mapping between symbol names and symbols. */ +struct { + char *name; + __ptr_t address; +} +dld_preloaded_symbols[] = +{ +EOF + sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (__ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$objext conftestm.$objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftestm.$objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo $progname:1207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + pipe_works=yes + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + LIBS="$save_LIBS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $global_symbol_pipe" >&5 + fi +else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 +fi +$rm conftest* + +# Do not use the global_symbol_pipe unless it works. +echo "$ac_t$pipe_works" 1>&6 +test "$pipe_works" = yes || global_symbol_pipe= + +# Check hardcoding attributes. +echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && \ + test "$hardcode_minus_L" != no && \ + test "$hardcode_shlibpath_var" != no; then + + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$ac_t$hardcode_action" 1>&6 + + +reload_flag= +reload_cmds='$LD$reload_flag -o $output$reload_objs' +echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 +# PORTME Some linkers may need a different reload flag. +reload_flag='-r' +echo "$ac_t$reload_flag" 1>&6 +test -n "$reload_flag" && reload_flag=" $reload_flag" + +# PORTME Fill in your ld.so characteristics +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +version_type=none +dynamic_linker="$host_os ld.so" + +echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 +case "$host_os" in +aix3* | aix4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +cygwin32* | mingw32*) + version_type=windows + if test "$with_gcc" = yes; then + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a' + else + library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' + fi + dynamic_linker='Win32 ld.exe' + shlibpath_var=PATH + ;; + +freebsd2* | freebsd3*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix $libname.so' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +gnu*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + shlibpath_var=SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6*) + version_type=osf + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + + if test -f /lib/ld.so.1; then + dynamic_linker='GNU ld.so' + else + # Only the GNU ld.so supports shared libraries on MkLinux. + case "$host_cpu" in + powerpc*) dynamic_linker=no ;; + *) dynamic_linker='Linux ld.so' ;; + esac + fi + ;; + +netbsd* | openbsd*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4*) + version_type=osf + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris2*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4.2uw2*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$ac_t$dynamic_linker" +test "$dynamic_linker" = no && can_build_shared=no + +# Report the final consequences. +echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 + +echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds;\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +esac + +echo "$ac_t$enable_shared" 1>&6 + +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes + +echo "checking whether to build static libraries... $enable_static" 1>&6 + +echo $ac_n "checking for objdir... $ac_c" 1>&6 +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +echo "$ac_t$objdir" 1>&6 + +# Copy echo and quote the copy, instead of the original, because it is +# used later. +ltecho="$echo" + +# Now quote all the things that may contain metacharacters. +for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \ + old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM DLLTOOL AS reload_flag \ + reload_cmds wl pic_flag link_static_flag no_builtin_flag \ + export_dynamic_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec RANLIB \ + old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds postinstall_cmds postuninstall_cmds \ + allow_undefined_flag no_undefined_flag objext libext \ + finish_cmds finish_eval global_symbol_pipe fix_srcfile_path \ + hardcode_libdir_flag_spec hardcode_libdir_separator; do + + case "$var" in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | archive_cmds | \ + postinstall_cmds | postuninstall_cmds | finish_cmds) + # Double-quote double-evaled strings. + eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\"\`" + ;; + *) + eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`" + ;; + esac +done + +trap "$rm \"$ofile\"; exit 1" 1 2 15 +echo "creating $ofile" +$rm "$ofile" +cat < "$ofile" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM - GNU $PACKAGE $VERSION +# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. +# +# Copyright (C) 1996-1998 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi + +### BEGIN LIBTOOL CONFIG +# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# CC="$old_CC" CFLAGS="$old_CFLAGS" CPPFLAGS="$old_CPPFLAGS" \\ +# LD="$old_LD" NM="$old_NM" RANLIB="$old_RANLIB" LN_S="$old_LN_S" \\ +# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\ +# $0$ltconfig_args +# +# Compiler and other test output produced by $progname, useful for +# debugging $progname, is in ./config.log if it exists. + +# The version of $progname that generated this script. +LTCONFIG_VERSION="$VERSION" + +# Shell to use when invoking shell scripts. +SHELL="$SHELL" + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# The host system. +host_alias="$host_alias" +host="$host" + +# An echo program that does not interpret backslashes. +echo="$ltecho" + +# The archiver. +AR="$AR" + +# The default C compiler. +CC="$CC" + +# The linker used to build libraries. +LD="$LD" + +# Whether we need hard or soft links. +LN_S="$LN_S" + +# A BSD-compatible nm program. +NM="$NM" + +# Used on cygwin32: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin32: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir="$objdir" + +# How to create reloadable object files. +reload_flag="$reload_flag" +reload_cmds="$reload_cmds" + +# How to pass a linker flag through the compiler. +wl="$wl" + +# Object file suffix (normally "o"). +objext="$objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Additional compiler flags for building library objects. +pic_flag="$pic_flag" + +# Compiler flag to prevent dynamic linking. +link_static_flag="$link_static_flag" + +# Compiler flag to turn off builtin functions. +no_builtin_flag="$no_builtin_flag" + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec="$export_dynamic_flag_spec" + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec="$whole_archive_flag_spec" + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec="$libname_spec" + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec="$library_names_spec" + +# The coded name of the library, if different from the real name. +soname_spec="$soname_spec" + +# Commands used to build and install an old-style archive. +RANLIB="$RANLIB" +old_archive_cmds="$old_archive_cmds" +old_postinstall_cmds="$old_postinstall_cmds" +old_postuninstall_cmds="$old_postuninstall_cmds" + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds="$old_archive_from_new_cmds" + +# Commands used to build and install a shared archive. +archive_cmds="$archive_cmds" +postinstall_cmds="$postinstall_cmds" +postuninstall_cmds="$postuninstall_cmds" + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag="$allow_undefined_flag" + +# Flag that forces no undefined symbols. +no_undefined_flag="$no_undefined_flag" + +# Commands used to finish a libtool library installation in a directory. +finish_cmds="$finish_cmds" + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval="$finish_eval" + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe="$global_symbol_pipe" + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec="$hardcode_libdir_flag_spec" + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator="$hardcode_libdir_separator" + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" +EOF + +case "$host_os" in +aix3*) + cat <<\EOF >> "$ofile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "${COLLECT_NAMES+set}" != set; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; +esac + +echo '### END LIBTOOL CONFIG' >> "$ofile" +echo >> "$ofile" + +# Append the ltmain.sh script. +cat "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1) + +chmod +x "$ofile" +exit 0 + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/sim/m32r-gx/ltmain.sh b/sim/m32r-gx/ltmain.sh new file mode 100644 index 00000000000..0d2d5d1f98a --- /dev/null +++ b/sim/m32r-gx/ltmain.sh @@ -0,0 +1,2639 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun ltconfig. +# +# Copyright (C) 1996-1998 Free Software Foundation, Inc. +# Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +# The name of this program. +progname=`$echo "$0" | sed 's%^.*/%%'` +modename="$progname" + +# Constants. +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.2b + +default_mode= +help="Try \`$progname --help' for more information." +magic="%%%MAGIC variable%%%" +mkdir="mkdir" +mv="mv -f" +rm="rm -f" + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +# We save the old values to restore during execute mode. +if test "${LC_ALL+set}" = set; then + save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +fi +if test "${LANG+set}" = set; then + save_LANG="$LANG"; LANG=C; export LANG +fi + +if test "$LTCONFIG_VERSION" != "$VERSION"; then + echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + echo "$modename: not configured to build any kind of library" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" +los2o="s/\\.lo /.${objext} /g" + +# Parse our command line options once, thoroughly. +while test $# -gt 0 +do + arg="$1" + shift + + case "$arg" in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case "$prev" in + execute_dlfiles) + eval "$prev=\"\$$prev \$arg\"" + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case "$arg" in + --help) + show_help=yes + ;; + + --version) + echo "$PROGRAM (GNU $PACKAGE) $VERSION" + exit 0 + ;; + + --config) + sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 + exit 0 + ;; + + --debug) + echo "$progname: enabling shell trace mode" + set -x + ;; + + --dry-run | -n) + run=: + ;; + + --features) + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + exit 0 + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --quiet | --silent) + show=: + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 +fi + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + case "$nonopt" in + *cc | *++ | gcc* | *-gcc*) + mode=link + for arg + do + case "$arg" in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case "$mode" in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + lastarg= + srcfile="$nonopt" + suppress_output= + + for arg + do + # Accept any command-line options. + case "$arg" in + -o) + $echo "$modename: you cannot specify the output filename with \`-o'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + -static) + build_old_libs=yes + continue + ;; + esac + + # Accept the current argument as the source file. + lastarg="$srcfile" + srcfile="$arg" + + # Aesthetically quote the previous argument. + + # Backslashify any backslashes, double quotes, and dollar signs. + # These are the only characters that are still specially + # interpreted inside of double-quoted scrings. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly in scan + # sets, so we specify it separately. + case "$lastarg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + lastarg="\"$lastarg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + done + + # Get the name of the library object. + libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + + # Recognize several different file suffixes. + xform='[cCFSfms]' + case "$libobj" in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case "$libobj" in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2 + exit 1 + ;; + esac + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + $run $rm $obj $libobj + trap "$run $rm $obj $libobj; exit 1" 1 2 15 + else + $run $rm $libobj + trap "$run $rm $libobj; exit 1" 1 2 15 + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + # All platforms use -DPIC, to notify preprocessed assembler code. + $show "$base_compile$pic_flag -DPIC $srcfile" + if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then : + else + test -n "$obj" && $run $rm $obj + exit 1 + fi + + # If we have no pic_flag, then copy the object into place and finish. + if test -z "$pic_flag"; then + $show "$LN_S $obj $libobj" + $run $LN_S $obj $libobj + exit $? + fi + + # Just move the object, then go on to compile the next one + $show "$mv $obj $libobj" + $run $mv $obj $libobj || exit $? + + # Allow error messages only from the first compilation. + suppress_output=' >/dev/null 2>&1' + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + # Suppress compiler output if we already did a PIC compilation. + $show "$base_compile $srcfile$suppress_output" + if $run eval "$base_compile \$srcfile$suppress_output"; then : + else + $run $rm $obj $libobj + exit 1 + fi + fi + + # Create an invalid libtool object if no PIC, so that we do not + # accidentally link it into a program. + if test "$build_libtool_libs" != yes; then + $show "echo timestamp > $libobj" + $run eval "echo timestamp > \$libobj" || exit $? + fi + + exit 0 + ;; + + # libtool link mode + link) + modename="$modename: link" + CC="$nonopt" + allow_undefined=yes + compile_command="$CC" + finalize_command="$CC" + + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + dlfiles= + dlprefiles= + export_dynamic=no + generated= + hardcode_libdirs= + libobjs= + link_against_libtool_libs= + ltlibs= + objs= + prev= + prevarg= + release= + rpath= + perm_rpath= + temp_rpath= + vinfo= + + # We need to know -static, to get the right output filenames. + for arg + do + case "$arg" in + -all-static | -static) + if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test $# -gt 0; do + arg="$1" + shift + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case "$prev" in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case "$prev" in + dlfiles|dlprefiles) + case "$arg" in + *.la | *.lo) ;; # We handle these cases below. + *) + dlprefiles="$dlprefiles $arg" + test "$prev" = dlfiles && dlfiles="$dlfiles $arg" + prev= + ;; + esac + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath) + rpath="$rpath $arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi + + prevarg="$arg" + + case "$arg" in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + if test "$export_dynamic" != yes; then + export_dynamic=yes + if test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + else + arg= + fi + + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + fi + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'` + case "$dir" in + /* | [A-Za-z]:[/\\]*) + # Add the corresponding hardcode_libdir_flag, if it is not identical. + ;; + *) + $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2 + exit 1 + ;; + esac + deplibs="$deplibs $arg" + ;; + + -l*) deplibs="$deplibs $arg" ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -o) prev=output ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -static) + # If we have no pic_flag, then this is the same as -all-static. + if test -z "$pic_flag" && test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + ;; + + *.o | *.obj | *.a | *.lib) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A library object. + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + if test "$build_libtool_libs" = yes; then + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` + prev= + fi + libobjs="$libobjs $arg" + ;; + + *.la) + # A libtool-controlled library. + + dlname= + libdir= + library_names= + old_library= + + # Check to see that this really is a libtool archive. + if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 + exit 1 + fi + + # If there is no directory component, then add one. + case "$arg" in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 + exit 1 + fi + + # Find the relevant object directory and library name. + name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` + dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$arg"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + + if test -z "$libdir"; then + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $dir/$old_library"l + old_convenience="$old_convenience $dir/$old_library" + compile_command="$compile_command $dir/$old_library" + finalize_command="$finalize_command $dir/$old_library" + continue + fi + + # This library was specified with -dlopen. + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + if test -z "$dlname"; then + # If there is no dlname, we need to preload. + prev=dlprefiles + else + # We should not create a dependency on this library, but we + # may need any libraries it requires. + compile_command="$compile_command$dependency_libs" + finalize_command="$finalize_command$dependency_libs" + prev= + continue + fi + fi + + # The library was specified with -dlpreopen. + if test "$prev" = dlprefiles; then + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + dlprefiles="$dlprefiles $dir/$old_library" + else + dlprefiles="$dlprefiles $dir/$linklib" + fi + prev= + fi + + if test "$build_libtool_libs" = yes && test -n "$library_names"; then + link_against_libtool_libs="$link_against_libtool_libs $arg" + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + + # This is the magic to use -rpath. + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + # Put the magic libdir with the hardcode flag. + hardcode_libdirs="$libdir" + libdir="@HARDCODE_LIBDIRS@" + else + # Just accumulate the unique libdirs. + case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + libdir= + fi + fi + + if test -n "$libdir"; then + eval flag=\"$hardcode_libdir_flag_spec\" + + compile_command="$compile_command $flag" + finalize_command="$finalize_command $flag" + fi + elif test -n "$runpath_var"; then + # Do the same for the permanent run path. + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + + + lib_linked=yes + case "$hardcode_action" in + immediate | unsupported) + if test "$hardcode_direct" = no; then + compile_command="$compile_command $dir/$linklib" + elif test "$hardcode_minus_L" = no; then + case "$host" in + *-*-sunos*) + compile_shlibpath="$compile_shlibpath$dir:" + ;; + esac + compile_command="$compile_command -L$dir -l$name" + elif test "$hardcode_shlibpath_var" = no; then + compile_shlibpath="$compile_shlibpath$dir:" + compile_command="$compile_command -l$name" + else + lib_linked=no + fi + ;; + + relink) + # We need an absolute path. + case "$dir" in + /* | [A-Za-z]:[/\\]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 + fi + dir="$absdir" + ;; + esac + + if test "$hardcode_direct" = yes; then + compile_command="$compile_command $dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + compile_command="$compile_command -L$dir -l$name" + elif test "$hardcode_shlibpath_var" = yes; then + compile_shlibpath="$compile_shlibpath$dir:" + compile_command="$compile_command -l$name" + else + lib_linked=no + fi + ;; + + *) + lib_linked=no + ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + finalize_command="$finalize_command $libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + finalize_command="$finalize_command -L$libdir -l$name" + elif test "$hardcode_shlibpath_var" = yes; then + finalize_shlibpath="$finalize_shlibpath$libdir:" + finalize_command="$finalize_command -l$name" + else + # We cannot seem to hardcode it, guess we'll fake it. + finalize_command="$finalize_command -L$libdir -l$name" + fi + else + # Transform directly to old archives if we don't build new libraries. + if test -n "$pic_flag" && test -z "$old_library"; then + $echo "$modename: cannot find static library for \`$arg'" 1>&2 + exit 1 + fi + + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_command="$compile_command $dir/$linklib" + finalize_command="$finalize_command $dir/$linklib" + else + compile_command="$compile_command -L$dir -l$name" + finalize_command="$finalize_command -L$dir -l$name" + fi + fi + + # Add in any libraries that this one depends upon. + compile_command="$compile_command$dependency_libs" + finalize_command="$finalize_command$dependency_libs" + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + ;; + esac + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + oldlibs= + case "$output" in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + */* | *\\*) + $echo "$modename: output file \`$output' must have no directory components" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *.a | *.lib) + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 + exit 1 + fi + + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles"; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + ;; + + *.la) + # Make sure we only generate libraries of the form `libNAME.la'. + case "$output" in + lib*) ;; + *) + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval libname=\"$libname_spec\" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + if test -n "$objs"; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 + exit 1 + fi + + # How the heck are we supposed to write a wrapper for a shared library? + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 + exit 1 + fi + + if test -n "$dlfiles$dlprefiles"; then + $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test $# -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + # Now set the variables for building old libraries. + oldlibs="$objdir/$libname.$libext" + if test -z "$rpath"; then + # Building a libtool convenience library. + oldlibs="$objdir/$libname.al $oldlibs" + build_libtool_libs=convenience + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + current="$2" + revision="$3" + age="$4" + + # Check that each of the things are valid numbers. + case "$current" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case "$revision" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case "$age" in + 0 | [1-9] | [1-9][0-9]*) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + if test $age -gt $current; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case "$version_type" in + none) ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test $loop != 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Like Linux, but with '-' rather than '.', since we only + # want one extension on Windows 95. + major=`expr $current - $age` + versuffix="-$major-$age-$revision" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + versuffix= + verstring="0.0" + case "$host" in + *-*-sunos*) + versuffix=".0.0" + ;; + esac + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + # Add libc to deplibs on all systems. + dependency_libs="$deplibs" + deplibs="$deplibs -lc" + fi + + # Create the output directory, or remove our outputs if we need to. + if test -d $objdir; then + $show "${rm}r $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*" + $run ${rm}r $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.* + else + $show "$mkdir $objdir" + $run $mkdir $objdir + status=$? + if test $status -ne 0 && test ! -d $objdir; then + exit $status + fi + fi + + if test "$build_libtool_libs" = yes; then + # Get the real and link names of the library. + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + lib="$objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are PIC. + test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e "$los2o" -e 's/ $//g'` + + # Transform .lo files to .o files. + test "$build_old_libs" = yes && oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/[^ ]*\.lib //g' -e "$los2o" -e 's/ $//g'` + + if test -n "$whole_archive_flag_spec"; then + if test -n "$convenience"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + else + for xlib in $convenience; do + # Extract the objects. + xdir="$xlib"x + generated="$generated $xdir" + xlib=`echo "$xlib" | $Xsed -e 's%^.*/%%'` + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x ../$xlib)" + $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $? + + libobjs="$libobjs `echo $xdir/*`" + done + fi + + # Do each of the archive commands. + eval cmds=\"$archive_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $objdir && $LN_S $realname $linkname)" + $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -export-dynamic was specified, set the dlname. + if test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + *.lo | *.o | *.obj) + if test -n "$link_against_libtool_libs"; then + $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 + exit 1 + fi + + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles"; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case "$output" in + *.lo) + if test -n "$objs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit 1 + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Create the old-style object. + reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/[^ ]*\.lib //g' -e "$los2o" -e 's/ $//g'` + + output="$obj" + eval cmds=\"$reload_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + test -z "$libobj" && exit 0 + + if test "$build_libtool_libs" != yes; then + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + $show "echo timestamp > $libobj" + $run eval "echo timestamp > $libobj" || exit $? + exit 0 + fi + + if test -n "$pic_flag"; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs" + output="$libobj" + eval cmds=\"$reload_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + else + # Just create a symlink. + $show "$LN_S $obj $libobj" + $run $LN_S $obj $libobj || exit $? + fi + + exit 0 + ;; + + *) + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test -n "$rpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + # Put the magic libdir with the hardcode flag. + hardcode_libdirs="$libdir" + libdir="@HARDCODE_LIBDIRS@" + else + # Just accumulate the unique libdirs. + case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + libdir= + fi + fi + + if test -n "$libdir"; then + eval flag=\"$hardcode_libdir_flag_spec\" + + compile_command="$compile_command $flag" + finalize_command="$finalize_command $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + fi + + # Substitute the hardcoded libdirs into the compile commands. + if test -n "$hardcode_libdir_separator"; then + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"` + fi + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command " | $Xsed -e "$los2o" -e 's/ $//'` + finalize_command=`$echo "X$finalize_command " | $Xsed -e "$los2o" -e 's/ $//'` + fi + + if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${output}S.c" + else + dlsyms= + fi + + if test -n "$dlsyms"; then + # Add our own program objects to the preloaded list. + dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e "$los2o" -e 's/ $//'` + + # Discover the nlist of each of the dlfiles. + nlist="$objdir/${output}.nm" + + if test -d $objdir; then + $show "$rm $nlist ${nlist}T" + $run $rm "$nlist" "${nlist}T" + else + $show "$mkdir $objdir" + $run $mkdir $objdir + status=$? + if test $status -ne 0 && test ! -d $objdir; then + exit $status + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + # Parse the name list into a source file. + $show "creating $objdir/$dlsyms" + if test -z "$run"; then + # Make sure we at least have an empty file. + test -f "$nlist" || : > "$nlist" + + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + wcout=`wc "$nlist" 2>/dev/null` + count=`echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` + (test "$count" -ge 0) 2>/dev/null || count=-1 + else + $rm "$nlist"T + count=-1 + fi + + case "$dlsyms" in + "") ;; + *.c) + $echo > "$objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define dld_preloaded_symbol_count some_other_symbol +#define dld_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test -f "$nlist"; then + sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms" + else + echo '/* NONE */' >> "$objdir/$dlsyms" + fi + + $echo >> "$objdir/$dlsyms" "\ + +#undef dld_preloaded_symbol_count +#undef dld_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define __ptr_t void * +#else +# define __ptr_t char * +#endif + +/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ +int dld_preloaded_symbol_count = $count; + +/* The mapping between symbol names and symbols. */ +struct { + char *name; + __ptr_t address; +} +dld_preloaded_symbols[] = +{\ +" + + if test -f "$nlist"; then + sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms" + fi + + $echo >> "$objdir/$dlsyms" "\ + {0, (__ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif\ +" + ;; + + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit 1 + ;; + esac + fi + + # Now compile the dynamic symbol file. + $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")" + $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $? + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"` + elif test "$export_dynamic" != yes; then + test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2 + else + # We keep going just in case the user didn't refer to + # dld_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + + # We have no uninstalled library dependencies, so finalize right now. + $show "$compile_command" + $run eval "$compile_command" + exit $? + fi + + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'` + finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'` + + # Create the binary in the object directory, then wrap it. + if test ! -d $objdir; then + $show "$mkdir $objdir" + $run $mkdir $objdir + status=$? + if test $status -ne 0 && test ! -d $objdir; then + exit $status + fi + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case "$dir" in + /* | [A-Za-z]:[/\\]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + # Delete the old output file. + $run $rm $output + + if test -n "$compile_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command" + finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command" + fi + + if test "$hardcode_action" = relink; then + # AGH! Flame the AIX and HP-UX people for me, will ya? + $echo "$modename: warning: using a buggy system linker" 1>&2 + $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2 + fi + + $show "$compile_command" + $run eval "$compile_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the finalize command for shipping. + finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"` + + # Quote $echo for shipping. + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + $rm $output + trap "$rm $output; exit 1" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$output +# Generated by $PROGRAM - GNU $PACKAGE $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of \``pwd`'. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + link_against_libtool_libs='$link_against_libtool_libs' + finalize_command=\"$finalize_command\" +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" + + progdir=\"\$thisdir/$objdir\" + program='$output' + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\` + + export $shlibpath_var +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + + # Export the path to the program. + PATH=\"\$progdir:\$PATH\" + export PATH + + exec \$program \${1+\"\$@\"} + + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit 1 + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" + chmod +x $output + fi + exit 0 + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs" + addlibs="$convenience" + build_libtool_libs=no + else + oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/[^ ]*\.lib //g' -e "$los2o" -e 's/ $//g'` + addlibs="$old_convenience" + fi + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + xdir="$xlib"x + generated="$generated $xdir" + xlib=`echo "$xlib" | $Xsed -e 's%^.*/%%'` + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" + status=$? + if test $status -ne 0 && test ! -d "$xdir"; then + exit $status + fi + $show "(cd $xdir && $AR x ../$xlib)" + $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $? + + oldobjs="$oldobjs `echo $xdir/*`" + done + + # Do each command in the archive commands. + if test "$build_old_libs" = yes + then + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + eval cmds=\"$old_archive_from_new_cmds\" + else + eval cmds=\"$old_archive_cmds\" + fi + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case "$output" in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Only create the output if not a dry run. + if test -z "$run"; then + $echo > $output "\ +# $output - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION + +# The name that we can dlopen(3). +dlname='$dlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Directory that this library needs to be installed in: +libdir='$install_libdir'\ +" + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $objdir && $LN_S ../$output $output)" + $run eval "(cd $objdir && $LN_S ../$output $output)" || exit $? + ;; + esac + exit 0 + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = "/bin/sh"; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case "$arg" in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case "$arg" in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit 1 + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test $# -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + fi + case "$destdir" in + /* | [A-Za-z]:[/\\]*) ;; + *) + for file in $files; do + case "$file" in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case "$file" in + *.a | *.lib) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + library_names= + old_library= + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$realname $destdir/$realname" + $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? + test "X$dlname" = "X$realname" && dlname= + + if test $# -gt 0; then + # Delete the old symlinks. + rmcmd="$rm" + for linkname + do + if test "X$linkname" != "X$realname"; then + rmcmd="$rmcmd $destdir/$linkname" + fi + done + $show "$rmcmd" + $run $rmcmd + + # ... and create new ones. + for linkname + do + if test "X$linkname" != "X$realname"; then + test "X$dlname" = "X$linkname" && dlname= + $show "(cd $destdir && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $LN_S $realname $linkname)" + fi + done + fi + + if test -n "$dlname"; then + # Install the dynamically-loadable library. + $show "$install_prog $dir/$dlname $destdir/$dlname" + $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $? + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + eval cmds=\"$postinstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + $show "$install_prog $file $destdir/$name" + $run eval "$install_prog $file $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case "$destfile" in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.o | *.obj) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit 0 + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + link_against_libtool_libs= + finalize_command= + + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Check the variables that should have been set. + if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then + $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 + exit 1 + fi + + finalize=yes + for lib in $link_against_libtool_libs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case "$lib" in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + if test "$hardcode_action" = relink; then + if test "$finalize" = yes; then + $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2 + $show "$finalize_command" + if $run eval "$finalize_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + continue + fi + file="$objdir/$file"T + else + $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + # Do each command in the postinstall commands. + eval cmds=\"$old_postinstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec $SHELL $0 --finish$current_libdirs + exit 1 + fi + + exit 0 + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + eval cmds=\"$finish_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + echo " $libdir" + done + echo + echo "To link against installed libraries in a given directory, LIBDIR," + echo "you must use the \`-LLIBDIR' flag during linking." + echo + echo " You will also need to do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + echo "See any operating system documentation about shared libraries for" + echo "more information, such as the ld(1) and ld.so(8) manual pages." + echo "----------------------------------------------------------------------" + exit 0 + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit 1 + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + dir= + case "$file" in + *.la) + # Check to see that this really is a libtool archive. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit 1 + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case "$file" in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case "$file" in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + + # Restore saved enviroment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now actually exec the command. + eval "exec \$cmd$args" + + $echo "$modename: cannot exec \$cmd$args" + exit 1 + else + # Display what would be done. + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + $echo "$cmd$args" + exit 0 + fi + ;; + + # libtool uninstall mode + uninstall) + modename="$modename: uninstall" + rm="$nonopt" + files= + + for arg + do + case "$arg" in + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + rmfiles="$file" + + case "$name" in + *.la) + # Possibly a libtool archive, so verify it. + if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $dir/$n" + test "X$n" = "X$dlname" && dlname= + done + test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname" + test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" + + $show "$rm $rmfiles" + $run $rm $rmfiles + + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + done + IFS="$save_ifs" + fi + + # FIXME: should reinstall the best remaining shared library. + fi + ;; + + *.lo) + if test "$build_old_libs" = yes; then + oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` + rmfiles="$rmfiles $dir/$oldobj" + fi + $show "$rm $rmfiles" + $run $rm $rmfiles + ;; + + *) + $show "$rm $rmfiles" + $run $rm $rmfiles + ;; + esac + done + exit 0 + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + ;; + esac + + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 +fi # test -z "$show_help" + +# We need to display help for each of the modes. +case "$mode" in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --version print version information + +MODE must be one of the following: + + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE." + exit 0 + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to dld_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only +library objects (\`.lo' files) may be specified, and \`-rpath' is required. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on WIndows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; +esac + +echo +$echo "Try \`$modename --help' for more information about other modes." + +exit 0 + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/sim/m32r-gx/m32r-sim.h b/sim/m32r-gx/m32r-sim.h new file mode 100644 index 00000000000..e69de29bb2d diff --git a/sim/m32r-gx/sim-if.c b/sim/m32r-gx/sim-if.c new file mode 100644 index 00000000000..fcb7f77ee4d --- /dev/null +++ b/sim/m32r-gx/sim-if.c @@ -0,0 +1,250 @@ +/* Main simulator entry points for the M32R. + Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along +with this program; if not, write to the Free Software Foundation, Inc., +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "sim-main.h" +#ifdef HAVE_STDLIB_H +#include +#endif +#include "sim-options.h" +#include "libiberty.h" +#include "bfd.h" +#include "sim-assert.h" + + +static void free_state (SIM_DESC); + +/* Records simulator descriptor so utilities like m32r_dump_regs can be + called from gdb. */ +SIM_DESC current_state; + +/* Cover function of sim_state_free to free the cpu buffers as well. */ + +static void +free_state (SIM_DESC sd) +{ + if (STATE_MODULES (sd) != NULL) + sim_module_uninstall (sd); + sim_cpu_free_all (sd); + sim_state_free (sd); +} + +/* Create an instance of the simulator. */ + +SIM_DESC +sim_open (kind, callback, abfd, argv) + SIM_OPEN_KIND kind; + host_callback *callback; + struct _bfd *abfd; + char **argv; +{ + SIM_DESC sd = sim_state_alloc (kind, callback); + + sim_cpu_alloc_all (sd, 1, 0); + + if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK) + { + free_state (sd); + return 0; + } + + /* Allocate core managed memory */ + sim_do_commandf (sd, "memory region 0,0x%lx", M32R_DEFAULT_MEM_SIZE); + + /* getopt will print the error message so we just have to exit if this fails. + FIXME: Hmmm... in the case of gdb we need getopt to call + print_filtered. */ + if (sim_parse_args (sd, argv) != SIM_RC_OK) + { + free_state (sd); + return 0; + } + + /* check for/establish the reference program image */ + if (sim_analyze_program (sd, + (STATE_PROG_ARGV (sd) != NULL + ? *STATE_PROG_ARGV (sd) + : NULL), + abfd) != SIM_RC_OK) + { + free_state (sd); + return 0; + } + + /* Establish any remaining configuration options. */ + if (sim_config (sd) != SIM_RC_OK) + { + free_state (sd); + return 0; + } + + if (sim_post_argv_init (sd) != SIM_RC_OK) + { + free_state (sd); + return 0; + } + + /* Store in a global so things like sparc32_dump_regs can be invoked + from the gdb command line. */ + current_state = sd; + sim_gx_read_block_list(); + return sd; +} + +void +sim_close (sd, quitting) + SIM_DESC sd; + int quitting; +{ + sim_gx_write_block_list(); + sim_module_uninstall (sd); +} + + +USI +m32r_h_pc_get (SIM_CPU *current_cpu) +{ + return current_cpu->regs.h_pc; +} + +/* Set a value for h-pc. */ + +void +m32r_h_pc_set (SIM_CPU *current_cpu, USI newval) +{ + current_cpu->regs.h_pc = newval; +} + + +SIM_RC +sim_create_inferior (sd, abfd, argv, envp) + SIM_DESC sd; + struct _bfd *abfd; + char **argv; + char **envp; +{ + SIM_CPU *current_cpu = STATE_CPU (sd, 0); + SIM_ADDR addr; + + CPU_PC_STORE (current_cpu) = m32r_h_pc_set; + CPU_PC_FETCH (current_cpu) = m32r_h_pc_get; + CPU_REG_STORE (current_cpu) = & abort; + CPU_REG_FETCH (current_cpu) = & abort; + + if (abfd != NULL) + addr = bfd_get_start_address (abfd); + else + addr = 0; + + sim_pc_set (current_cpu, addr); + +#if 0 + STATE_ARGV (sd) = sim_copy_argv (argv); + STATE_ENVP (sd) = sim_copy_argv (envp); +#endif + + return SIM_RC_OK; +} + +int +sim_stop (SIM_DESC sd) +{ + sim_io_error(sd, "cannot sim_stop\n"); +} + +/* This isn't part of the official interface. + This is just a good place to put this for now. */ + +void +sim_sync_stop (SIM_DESC sd, SIM_CPU *cpu, PCADDR pc, enum sim_stop reason, int sigrc) +{ + sim_io_error(sd, "cannot sim_stop\n"); +} + +void +sim_resume (sd, step, siggnal) + SIM_DESC sd; + int step, siggnal; +{ + sim_engine *engine = STATE_ENGINE (sd); + jmp_buf buf; + int jmpval; + + sim_module_resume (sd); + ASSERT(step == 0); /* XXX */ + + engine->jmpbuf = &buf; + jmpval = setjmp (buf); + if(jmpval == 0) + sim_engine_run(sd, 0, 1, siggnal); + engine->jmpbuf = NULL; + + sim_module_suspend (sd); +} + +/* The contents of BUF are in target byte order. */ + +int +sim_fetch_register (sd, rn, buf, length) + SIM_DESC sd; + int rn; + unsigned char *buf; + int length; +{ + SIM_CPU *cpu = STATE_CPU (sd, 0); + + return (* CPU_REG_FETCH (cpu)) (cpu, rn, buf, length); +} + +/* The contents of BUF are in target byte order. */ + +int +sim_store_register (sd, rn, buf, length) + SIM_DESC sd; + int rn; + unsigned char *buf; + int length; +{ + SIM_CPU *cpu = STATE_CPU (sd, 0); + + return (* CPU_REG_STORE (cpu)) (cpu, rn, buf, length); +} + +void +sim_do_command (sd, cmd) + SIM_DESC sd; + char *cmd; +{ + if (sim_args_command (sd, cmd) != SIM_RC_OK) + sim_io_eprintf (sd, "Unknown command `%s'\n", cmd); +} + +/* Utility fns to access registers, without knowing the current mach. */ + +SI +h_gr_get (SIM_CPU *current_cpu, UINT regno) +{ + SIM_DESC sd = CURRENT_STATE; + sim_io_error(sd, "cannot h_gr_get\n"); +} + +void +h_gr_set (SIM_CPU *current_cpu, UINT regno, SI newval) +{ + SIM_DESC sd = CURRENT_STATE; + sim_io_error(sd, "cannot h_gr_set\n"); +} diff --git a/sim/m32r-gx/sim-main.h b/sim/m32r-gx/sim-main.h new file mode 100644 index 00000000000..2d425da9baf --- /dev/null +++ b/sim/m32r-gx/sim-main.h @@ -0,0 +1,94 @@ +/* Main header for the m32r. */ + +#define USING_SIM_BASE_H /* FIXME: quick hack */ + +struct _sim_cpu; /* FIXME: should be in sim-basics.h */ +typedef struct _sim_cpu SIM_CPU; + +/* sim-basics.h includes config.h but cgen-types.h must be included before + sim-basics.h and cgen-types.h needs config.h. */ +#include "config.h" + +#include "ansidecl.h" +#include "symcat.h" +#include "cgen-types.h" +#include "arch.h" +#include "sim-basics.h" + +/* These must be defined before sim-base.h. */ +typedef USI sim_cia; +#define CIA_GET(cpu) (cpu)->regs.h_pc +#define CIA_SET(cpu,val) (cpu)->regs.h_pc = (val) + +#define TRAP_SYSCALL 0 + +#include "sim-base.h" +#include "cpu-sim.h" + +#ifdef WANT_CPU_M32R +#include "cpu.h" +#include "decode.h" +#endif +#include "cpuall.h" + + +/* match with definition in gx-translate.c! */ +typedef struct tgx_cpu_regs +{ + unsigned int h_pc; /* program counter */ + signed int h_gr[16]; /* general registers */ + unsigned int h_cr[16]; /* control registers */ + long long h_accum; /* accumulator */ + unsigned h_lock; /* lock */ +} tgx_cpu_regs; + +/* match with definition in gx-translate.c! */ +typedef struct tgx_syscall_data +{ + unsigned pc; + unsigned func; + unsigned arg1; + unsigned arg2; + unsigned arg3; + unsigned errcode; + unsigned result; + unsigned result2; +} tgx_syscall_data; + + +/* match with definition in gx-translate.c! */ +typedef struct tgx_callbacks +{ + unsigned (*load)(unsigned pc, unsigned addr); + void (*store)(unsigned pc, unsigned addr, unsigned data); + signed char (*load1)(unsigned pc, unsigned addr); + void (*store1)(unsigned pc, unsigned addr, signed char data); + signed short (*load2)(unsigned pc, unsigned addr); + void (*store2)(unsigned pc, unsigned addr, signed short data); + void (*syscall)(tgx_syscall_data* data); +} tgx_callbacks; + + + +struct _sim_cpu +{ + sim_cpu_base base; + tgx_cpu_regs regs; +}; + +struct sim_state { + sim_cpu *cpu; +#define STATE_CPU(sd, n) (/*&*/ (sd)->cpu) + sim_state_base base; +}; + + +/* Default memory size. */ +#define M32R_DEFAULT_MEM_SIZE 0x800000 /* 8M */ + + + +/* Register access fns. These look up the current mach and call the + appropriate handler. */ +SI h_gr_get (SIM_CPU *, UINT); +void h_gr_set (SIM_CPU *, UINT, SI); diff --git a/sim/m32r-gx/tconfig.in b/sim/m32r-gx/tconfig.in new file mode 100644 index 00000000000..49e71565191 --- /dev/null +++ b/sim/m32r-gx/tconfig.in @@ -0,0 +1,42 @@ +/* M32R target configuration file. -*- C -*- */ + +/* Define this if the simulator can vary the size of memory. + See the xxx simulator for an example. + This enables the `-m size' option. + The memory size is stored in STATE_MEM_SIZE. */ +/* Not used for M32R since we use the memory module. */ +/* #define SIM_HAVE_MEM_SIZE */ + +/* See sim-hload.c. We properly handle LMA. */ +#define SIM_HANDLES_LMA 1 + +/* FIXME: Revisit. */ +#ifdef HAVE_DV_SOCKSER +MODULE_INSTALL_FN dv_sockser_install; +#define MODULE_LIST dv_sockser_install, +#endif + +#if 0 +/* Enable watchpoints. */ +#define WITH_WATCHPOINTS 1 +#endif + +/* no profile */ +#define WITH_PROFILE 0 + +#if 0 +#define SIM_HAVE_BREAKPOINTS +#define SIM_BREAKPOINT { 0x10, 0xf1 } +#define SIM_BREAKPOINT_SIZE 2 +#endif + +/* The semantic code should probably always use a switch(). + However, in case that's not possible in some circumstance, we allow + the target to choose. Perhaps this can be autoconf'd on whether the + switch is too big? I can't (yet) think of a reason for allowing the + user to choose, though the developer may certainly wish to. */ +#ifdef WANT_CPU_M32R +#define WITH_FAST 1 +#define WITH_SEM_SWITCH_FULL 0 +#define WITH_SEM_SWITCH_FAST 1 +#endif