From: Angela Marie Thomas Date: Fri, 2 May 1997 06:43:07 +0000 (+0000) Subject: remove junk files that have been here waaaaaaaay too long X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=949fccf66b273ceff1a2d21b3558f24aca17f60d;p=binutils-gdb.git remove junk files that have been here waaaaaaaay too long --- diff --git a/sim/arm/Makefile.orig b/sim/arm/Makefile.orig deleted file mode 100644 index 020045c3268..00000000000 --- a/sim/arm/Makefile.orig +++ /dev/null @@ -1,120 +0,0 @@ -# Makefile for ARMulator: ARM6 Instruction Emulator. -# Copyright (C) 1994 Advanced RISC Machines Ltd. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -# These variables can be overridden - -#Default endianness of the processor (LITTLEEND or BIGEND) -ENDIAN=LITTLEEND - -prefix=/usr/local -CC = gcc -CFLAGS = -O2 -D$(ENDIAN) $(CFL) -INSTALL_DIR = $(prefix)/bin -INSTALL=cp - -# Everything else should be ok as it is. - -OBJS = armcopro.o armemu26.o armemu32.o arminit.o armos.o \ - armsupp.o main.o parent.o kid.o communicate.o gdbhost.o \ - bag.o armrdi.o - -SRCS = armcopro.c armemu.c arminit.c armos.c armvirt.c \ - armsupp.c main.c parent.c kid.c communicate.c gdbhost.c \ - bag.c armrdi.c -INCS = armdefs.h armemu.h armfpe.h armopts.h armos.h bag.h communicate.h \ - dbg_conf.h dbg_cp.h dbg_hif.h dbg_rdi.h gdbhost.h - -TARED = $(SRCS) $(INCS) README COPYING Makefile - -MODEL = armvirt - -VER=1.0 - -all: armul - -install: all - $(INSTALL) armul $(INSTALL_DIR) - -armul: $(OBJS) $(MODEL).o - $(CC) $(CFLAGS) $(OBJS) $(MODEL).o -o $@ -lm -lXext -lX11 - -clean: - rm -f *.o armul core - -distclean: clean - rm -f *~ - -realclean: distclean - rm -f *.tar *.tar.gz - -armul.tar.gz: - rm -rf armul-$(VER) - mkdir armul-$(VER) - cd armul-$(VER) ; \ - for file in $(TARED) ; do \ - ln ../$${file} . ; \ - done - tar cf armul.tar armul-$(VER) - gzip armul.tar - mv armul.tar.gz armul-$(VER).tar.gz - -# memory models - -armvirt.o: armdefs.h armvirt.c - $(CC) $(CFLAGS) -c $*.c - -# other objects - -armos.o: armos.c armdefs.h armos.h armfpe.h - $(CC) $(CFLAGS) -c $*.c - -armcopro.o: armcopro.c armdefs.h - $(CC) $(CFLAGS) -c $*.c - -armemu26.o: armemu.c armdefs.h armemu.h - $(CC) $(CFLAGS) -o armemu26.o -c armemu.c - -armemu32.o: armemu.c armdefs.h armemu.h - $(CC) $(CFLAGS) -o armemu32.o -DMODE32 -c armemu.c - -arminit.o: arminit.c armdefs.h armemu.h - $(CC) $(CFLAGS) -c $*.c - -armrdi.o: armrdi.c armdefs.h armemu.h armos.h dbg_cp.h dbg_conf.h dbg_rdi.h \ - dbg_hif.h communicate.h - $(CC) $(CFLAGS) -c $*.c - -armsupp.o: armsupp.c armdefs.h armemu.h - $(CC) $(CFLAGS) -c $*.c - -kid.o: kid.c armdefs.h dbg_conf.h dbg_hif.h dbg_rdi.h gdbhost.h communicate.h - $(CC) $(CFLAGS) -c $*.c - -main.o: main.c armdefs.h dbg_rdi.h dbg_conf.h - $(CC) $(CFLAGS) -c $*.c - -communicate.o: communicate.c armdefs.h - $(CC) $(CFLAGS) -c $*.c - -bag.o: bag.c bag.h - $(CC) $(CFLAGS) -c $*.c - -gdbhost.o: gdbhost.c armdefs.h communicate.h dbg_rdi.h armos.h - $(CC) $(CFLAGS) -c $*.c - -parent.o: parent.c armdefs.h dbg_rdi.h communicate.h - $(CC) $(CFLAGS) -c $*.c diff --git a/sim/arm/README.orig b/sim/arm/README.orig deleted file mode 100644 index d131a3963e4..00000000000 --- a/sim/arm/README.orig +++ /dev/null @@ -1,58 +0,0 @@ -This is the README file for ARMulator version 1.0, an ARM6 instruction -emulator. - -Configuration: - The armulator has one configuration option, the default endianness - of the processor. This can be changed by building with ENDIAN=BIGEND - to produce a big-endian variant. The debugger can also select the - endianness at run-time. - -Build instructions: - - This program is known to compile using GCC 2.6.0 on a Sun4. Other - builds are untested. It almost certainly will not work on non-32bit - machines. - - To build the program simply type make in the source directory, - followed by "make install" - -Using the emulator: - - The emulator runs as a separate process, and communicates with a - debugger via tcp. To start the emulator type - armul - where socknum is any number between 1024 and 65535. If the socket is - already in use, armul will exit with an error. - - This version of armul has been designed to work with gdb-4.13 - with the ARM/RDP/RDI extensions added (available separately). To - connect gdb to the ARMulator, start gdb and type - target arm : - where hostname is the name of the machine on which the armulator - is running, and socknum is the socket number specified when armul - was started. - -IMPORTANT: - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Advanced RISC Machines welcomes bug reports for this package, - but no undertaking can be made to provide support or reply to email. - Bugs should be sent to: - armgnu@armltd.co.uk - - - - \ No newline at end of file