From: Pedro Alves Date: Thu, 20 Mar 2014 13:26:32 +0000 (+0000) Subject: Handle multiple step-overs. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=99619beac6252113fed212fdb9e1ab97bface423;p=binutils-gdb.git Handle multiple step-overs. This test fails with current mainline. If the program stopped for a breakpoint in thread 1, and then the user switches to thread 2, and resumes the program, GDB first switches back to thread 1 to step it over the breakpoint, in order to make progress. However, that logic only considers the last reported event, assuming only one thread needs that stepping over dance. That's actually not true when we play with scheduler-locking. The patch adds an example to the testsuite of multiple threads needing a step-over before the stepping thread can be resumed. With current mainline, the program re-traps the same breakpoint it had already trapped before. E.g.: Breakpoint 2, main () at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:99 99 wait_threads (); /* set wait-threads breakpoint here */ (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: continue to breakpoint: run to breakpoint info threads Id Target Id Frame 3 Thread 0x7ffff77c9700 (LWP 4310) "multiple-step-o" 0x00000000004007ca in child_function_3 (arg=0x1) at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:43 2 Thread 0x7ffff7fca700 (LWP 4309) "multiple-step-o" 0x0000000000400827 in child_function_2 (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:60 * 1 Thread 0x7ffff7fcb740 (LWP 4305) "multiple-step-o" main () at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:99 (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: info threads shows all threads set scheduler-locking on (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: set scheduler-locking on break 44 Breakpoint 3 at 0x4007d3: file ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c, line 44. (gdb) break 61 Breakpoint 4 at 0x40082d: file ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c, line 61. (gdb) thread 3 [Switching to thread 3 (Thread 0x7ffff77c9700 (LWP 4310))] #0 0x00000000004007ca in child_function_3 (arg=0x1) at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:43 43 (*myp) ++; (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: thread 3 continue Continuing. Breakpoint 3, child_function_3 (arg=0x1) at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:44 44 callme (); /* set breakpoint thread 3 here */ (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: continue to breakpoint: run to breakpoint in thread 3 p *myp = 0 $1 = 0 (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: unbreak loop in thread 3 thread 2 [Switching to thread 2 (Thread 0x7ffff7fca700 (LWP 4309))] #0 0x0000000000400827 in child_function_2 (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:60 60 (*myp) ++; (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: thread 2 continue Continuing. Breakpoint 4, child_function_2 (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:61 61 callme (); /* set breakpoint thread 2 here */ (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: continue to breakpoint: run to breakpoint in thread 2 p *myp = 0 $2 = 0 (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: unbreak loop in thread 2 thread 1 [Switching to thread 1 (Thread 0x7ffff7fcb740 (LWP 4305))] #0 main () at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:99 99 wait_threads (); /* set wait-threads breakpoint here */ (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: thread 1 set scheduler-locking off (gdb) PASS: gdb.threads/multiple-step-overs.exp: step: set scheduler-locking off At this point all thread are stopped for a breakpoint that needs stepping over. (gdb) step Breakpoint 2, main () at ../../../src/gdb/testsuite/gdb.threads/multiple-step-overs.c:99 99 wait_threads (); /* set wait-threads breakpoint here */ (gdb) FAIL: gdb.threads/multiple-step-overs.exp: step But that "step" retriggers the same breakpoint instead of making progress. The patch teaches GDB to step over all breakpoints of all threads before resuming the stepping thread. Tested on x86_64 Fedora 17, against pristine mainline, and also my branch that implements software single-stepping on x86. gdb/ 2014-03-20 Pedro Alves * infrun.c (prepare_to_proceed): Delete. (thread_still_needs_step_over): New function. (find_thread_needs_step_over): New function. (proceed): If the current thread needs a step-over, set its steping_over_breakpoint flag. Adjust to use find_thread_needs_step_over instead of prepare_to_proceed. (process_event_stop_test): For BPSTAT_WHAT_STOP_NOISY and BPSTAT_WHAT_STOP_SILENT, assume the thread stopped for a breakpoint. (switch_back_to_stepped_thread): Step over breakpoints of all threads not the stepping thread, before switching back to the stepping thread. gdb/testsuite/ 2014-03-20 Pedro Alves * gdb.threads/multiple-step-overs.c: New file. * gdb.threads/multiple-step-overs.exp: New file. * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Adjust expected infrun debug output. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index e0a58aae63a..814be2c52d4 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,18 @@ +2014-03-20 Pedro Alves + + * infrun.c (prepare_to_proceed): Delete. + (thread_still_needs_step_over): New function. + (find_thread_needs_step_over): New function. + (proceed): If the current thread needs a step-over, set its + steping_over_breakpoint flag. Adjust to use + find_thread_needs_step_over instead of prepare_to_proceed. + (process_event_stop_test): For BPSTAT_WHAT_STOP_NOISY and + BPSTAT_WHAT_STOP_SILENT, assume the thread stopped for a + breakpoint. + (switch_back_to_stepped_thread): Step over breakpoints of all + threads not the stepping thread, before switching back to the + stepping thread. + 2014-03-20 Pedro Alves * breakpoint.c (single_step_breakpoint_inserted_here_p): Make diff --git a/gdb/infrun.c b/gdb/infrun.c index 60abd8ca663..d7de7d16339 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -90,8 +90,6 @@ static int currently_stepping_or_nexting_callback (struct thread_info *tp, static void xdb_handle_command (char *args, int from_tty); -static int prepare_to_proceed (int); - static void print_exited_reason (int exitstatus); static void print_signal_exited_reason (enum gdb_signal siggnal); @@ -2088,75 +2086,74 @@ clear_proceed_status (void) } } -/* Check the current thread against the thread that reported the most recent - event. If a step-over is required return TRUE and set the current thread - to the old thread. Otherwise return FALSE. - - This should be suitable for any targets that support threads. */ +/* Returns true if TP is still stopped at a breakpoint that needs + stepping-over in order to make progress. If the breakpoint is gone + meanwhile, we can skip the whole step-over dance. */ static int -prepare_to_proceed (int step) +thread_still_needs_step_over (struct thread_info *tp) +{ + if (tp->stepping_over_breakpoint) + { + struct regcache *regcache = get_thread_regcache (tp->ptid); + + if (breakpoint_here_p (get_regcache_aspace (regcache), + regcache_read_pc (regcache))) + return 1; + + tp->stepping_over_breakpoint = 0; + } + + return 0; +} + +/* Look a thread other than EXCEPT that has previously reported a + breakpoint event, and thus needs a step-over in order to make + progress. Returns NULL is none is found. STEP indicates whether + we're about to step the current thread, in order to decide whether + "set scheduler-locking step" applies. */ + +static struct thread_info * +find_thread_needs_step_over (int step, struct thread_info *except) { - ptid_t wait_ptid; - struct target_waitstatus wait_status; int schedlock_enabled; + struct thread_info *tp, *current; /* With non-stop mode on, threads are always handled individually. */ gdb_assert (! non_stop); - /* Get the last target status returned by target_wait(). */ - get_last_target_status (&wait_ptid, &wait_status); - - /* Make sure we were stopped at a breakpoint. */ - if (wait_status.kind != TARGET_WAITKIND_STOPPED - || (wait_status.value.sig != GDB_SIGNAL_TRAP - && wait_status.value.sig != GDB_SIGNAL_ILL - && wait_status.value.sig != GDB_SIGNAL_SEGV - && wait_status.value.sig != GDB_SIGNAL_EMT)) - { - return 0; - } - schedlock_enabled = (scheduler_mode == schedlock_on || (scheduler_mode == schedlock_step && step)); - /* Don't switch over to WAIT_PTID if scheduler locking is on. */ - if (schedlock_enabled) - return 0; - - /* Don't switch over if we're about to resume some other process - other than WAIT_PTID's, and schedule-multiple is off. */ - if (!sched_multi - && ptid_get_pid (wait_ptid) != ptid_get_pid (inferior_ptid)) - return 0; + current = inferior_thread (); - /* Switched over from WAIT_PID. */ - if (!ptid_equal (wait_ptid, minus_one_ptid) - && !ptid_equal (inferior_ptid, wait_ptid)) + /* If scheduler locking applies, we can avoid iterating over all + threads. */ + if (schedlock_enabled) { - struct regcache *regcache = get_thread_regcache (wait_ptid); + if (except != current + && thread_still_needs_step_over (current)) + return current; - if (breakpoint_here_p (get_regcache_aspace (regcache), - regcache_read_pc (regcache))) - { - /* Switch back to WAIT_PID thread. */ - switch_to_thread (wait_ptid); - - if (debug_infrun) - fprintf_unfiltered (gdb_stdlog, - "infrun: prepare_to_proceed (step=%d), " - "switched to [%s]\n", - step, target_pid_to_str (inferior_ptid)); + return NULL; + } - /* We return 1 to indicate that there is a breakpoint here, - so we need to step over it before continuing to avoid - hitting it straight away. */ - return 1; - } + ALL_THREADS (tp) + { + /* Ignore the EXCEPT thread. */ + if (tp == except) + continue; + /* Ignore threads of processes we're not resuming. */ + if (!sched_multi + && ptid_get_pid (tp->ptid) != ptid_get_pid (inferior_ptid)) + continue; + + if (thread_still_needs_step_over (tp)) + return tp; } - return 0; + return NULL; } /* Basic routine for continuing the program in various fashions. @@ -2179,8 +2176,6 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) struct thread_info *tp; CORE_ADDR pc; struct address_space *aspace; - /* GDB may force the inferior to step due to various reasons. */ - int force_step = 0; /* If we're stopped at a fork/vfork, follow the branch set by the "set follow-fork-mode" command; otherwise, we'll just proceed @@ -2208,6 +2203,9 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) if (step < 0) stop_after_trap = 1; + /* Fill in with reasonable starting values. */ + init_thread_stepping_state (tp); + if (addr == (CORE_ADDR) -1) { if (pc == stop_pc && breakpoint_here_p (aspace, pc) @@ -2220,14 +2218,13 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) Note, we don't do this in reverse, because we won't actually be executing the breakpoint insn anyway. We'll be (un-)executing the previous instruction. */ - - force_step = 1; + tp->stepping_over_breakpoint = 1; else if (gdbarch_single_step_through_delay_p (gdbarch) && gdbarch_single_step_through_delay (gdbarch, get_current_frame ())) /* We stepped onto an instruction that needs to be stepped again before re-inserting the breakpoint, do so. */ - force_step = 1; + tp->stepping_over_breakpoint = 1; } else { @@ -2246,6 +2243,8 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) ; else { + struct thread_info *step_over; + /* In a multi-threaded task we may select another thread and then continue or step. @@ -2254,31 +2253,29 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) execution (i.e. it will report a breakpoint hit incorrectly). So we must step over it first. - prepare_to_proceed checks the current thread against the - thread that reported the most recent event. If a step-over - is required it returns TRUE and sets the current thread to - the old thread. */ - - /* Store the prev_pc for the stepping thread too, needed by - switch_back_to_stepping thread. */ - tp->prev_pc = regcache_read_pc (get_current_regcache ()); - - if (prepare_to_proceed (step)) + Look for a thread other than the current (TP) that reported a + breakpoint hit and hasn't been resumed yet since. */ + step_over = find_thread_needs_step_over (step, tp); + if (step_over != NULL) { - force_step = 1; - /* The current thread changed. */ - tp = inferior_thread (); + if (debug_infrun) + fprintf_unfiltered (gdb_stdlog, + "infrun: need to step-over [%s] first\n", + target_pid_to_str (step_over->ptid)); + + /* Store the prev_pc for the stepping thread too, needed by + switch_back_to_stepping thread. */ + tp->prev_pc = regcache_read_pc (get_current_regcache ()); + switch_to_thread (step_over->ptid); + tp = step_over; } } - if (force_step) - tp->control.trap_expected = 1; - /* If we need to step over a breakpoint, and we're not using displaced stepping to do so, insert all breakpoints (watchpoints, etc.) but the one we're stepping over, step one instruction, and then re-insert the breakpoint when that step is finished. */ - if (tp->control.trap_expected && !use_displaced_stepping (gdbarch)) + if (tp->stepping_over_breakpoint && !use_displaced_stepping (gdbarch)) { struct regcache *regcache = get_current_regcache (); @@ -2290,6 +2287,8 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) insert_breakpoints (); + tp->control.trap_expected = tp->stepping_over_breakpoint; + if (!non_stop) { /* Pass the last stop signal to the thread we're resuming, @@ -2353,14 +2352,11 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) correctly when the inferior is stopped. */ tp->prev_pc = regcache_read_pc (get_current_regcache ()); - /* Fill in with reasonable starting values. */ - init_thread_stepping_state (tp); - /* Reset to normal state. */ init_infwait_state (); /* Resume inferior. */ - resume (force_step || step || bpstat_should_step (), + resume (tp->control.trap_expected || step || bpstat_should_step (), tp->suspend.stop_signal); /* Wait for it to stop (if not standalone) @@ -4491,8 +4487,10 @@ process_event_stop_test (struct execution_control_state *ecs) fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n"); stop_print_frame = 1; - /* We are about to nuke the step_resume_breakpointt via the - cleanup chain, so no need to worry about it here. */ + /* Assume the thread stopped for a breapoint. We'll still check + whether a/the breakpoint is there when the thread is next + resumed. */ + ecs->event_thread->stepping_over_breakpoint = 1; stop_stepping (ecs); return; @@ -4502,9 +4500,10 @@ process_event_stop_test (struct execution_control_state *ecs) fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n"); stop_print_frame = 0; - /* We are about to nuke the step_resume_breakpoin via the - cleanup chain, so no need to worry about it here. */ - + /* Assume the thread stopped for a breapoint. We'll still check + whether a/the breakpoint is there when the thread is next + resumed. */ + ecs->event_thread->stepping_over_breakpoint = 1; stop_stepping (ecs); return; @@ -5129,26 +5128,88 @@ switch_back_to_stepped_thread (struct execution_control_state *ecs) if (!non_stop) { struct thread_info *tp; - - tp = iterate_over_threads (currently_stepping_or_nexting_callback, - ecs->event_thread); - if (tp) + struct thread_info *stepping_thread; + + /* If any thread is blocked on some internal breakpoint, and we + simply need to step over that breakpoint to get it going + again, do that first. */ + + /* However, if we see an event for the stepping thread, then we + know all other threads have been moved past their breakpoints + already. Let the caller check whether the step is finished, + etc., before deciding to move it past a breakpoint. */ + if (ecs->event_thread->control.step_range_end != 0) + return 0; + + /* Check if the current thread is blocked on an incomplete + step-over, interrupted by a random signal. */ + if (ecs->event_thread->control.trap_expected + && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP) { - struct frame_info *frame; - struct gdbarch *gdbarch; + if (debug_infrun) + { + fprintf_unfiltered (gdb_stdlog, + "infrun: need to finish step-over of [%s]\n", + target_pid_to_str (ecs->event_thread->ptid)); + } + keep_going (ecs); + return 1; + } - /* However, if the current thread is blocked on some internal - breakpoint, and we simply need to step over that breakpoint - to get it going again, do that first. */ - if ((ecs->event_thread->control.trap_expected - && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP) - || ecs->event_thread->stepping_over_breakpoint - || ecs->hit_singlestep_breakpoint) + /* Check if the current thread is blocked by a single-step + breakpoint of another thread. */ + if (ecs->hit_singlestep_breakpoint) + { + if (debug_infrun) + { + fprintf_unfiltered (gdb_stdlog, + "infrun: need to step [%s] over single-step " + "breakpoint\n", + target_pid_to_str (ecs->ptid)); + } + keep_going (ecs); + return 1; + } + + stepping_thread + = iterate_over_threads (currently_stepping_or_nexting_callback, + ecs->event_thread); + + /* Check if any other thread except the stepping thread that + needs to start a step-over. Do that before actually + proceeding with step/next/etc. */ + tp = find_thread_needs_step_over (stepping_thread != NULL, + stepping_thread); + if (tp != NULL) + { + if (debug_infrun) { - keep_going (ecs); - return 1; + fprintf_unfiltered (gdb_stdlog, + "infrun: need to step-over [%s]\n", + target_pid_to_str (tp->ptid)); } + gdb_assert (!tp->control.trap_expected); + gdb_assert (tp->control.step_range_end == 0); + + /* We no longer expect a trap in the current thread. Clear + the trap_expected flag before switching. This is what + keep_going would do as well, if we called it. */ + ecs->event_thread->control.trap_expected = 0; + + ecs->ptid = tp->ptid; + ecs->event_thread = tp; + switch_to_thread (ecs->ptid); + keep_going (ecs); + return 1; + } + + tp = stepping_thread; + if (tp != NULL) + { + struct frame_info *frame; + struct gdbarch *gdbarch; + /* If the stepping thread exited, then don't try to switch back and resume it, which could fail in several different ways depending on the target. Instead, just keep going. @@ -5199,10 +5260,10 @@ switch_back_to_stepped_thread (struct execution_control_state *ecs) gdbarch = get_frame_arch (frame); /* If the PC of the thread we were trying to single-step has - changed, then the thread we were trying to single-step - has trapped or been signalled, but the event has not been - reported to GDB yet. Re-poll the remote looking for this - particular thread (i.e. temporarily enable schedlock) by: + changed, then that thread has trapped or been signaled, + but the event has not been reported to GDB yet. Re-poll + the target looking for this particular thread's event + (i.e. temporarily enable schedlock) by: - setting a break at the current PC - resuming that particular thread, only (by setting @@ -5712,7 +5773,7 @@ keep_going (struct execution_control_state *ecs) instruction, and then re-insert the breakpoint when that step is finished. */ if ((ecs->hit_singlestep_breakpoint - || ecs->event_thread->stepping_over_breakpoint) + || thread_still_needs_step_over (ecs->event_thread)) && !use_displaced_stepping (get_regcache_arch (regcache))) { set_step_over_info (get_regcache_aspace (regcache), diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 85373596899..9b64750ea27 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,10 @@ +2014-03-20 Pedro Alves + + * gdb.threads/multiple-step-overs.c: New file. + * gdb.threads/multiple-step-overs.exp: New file. + * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: + Adjust expected infrun debug output. + 2014-03-20 Pedro Alves * gdb.threads/step-over-trips-on-watchpoint.c: New file. diff --git a/gdb/testsuite/gdb.threads/multiple-step-overs.c b/gdb/testsuite/gdb.threads/multiple-step-overs.c new file mode 100644 index 00000000000..523a88a91f9 --- /dev/null +++ b/gdb/testsuite/gdb.threads/multiple-step-overs.c @@ -0,0 +1,105 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2009-2014 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include +#include +#include +#include + +unsigned int args[2]; + +pthread_barrier_t barrier; +pthread_t child_thread_2, child_thread_3; + +void +callme (void) +{ +} + +void * +child_function_3 (void *arg) +{ + int my_number = (long) arg; + volatile int *myp = (int *) &args[my_number]; + + pthread_barrier_wait (&barrier); + + while (*myp > 0) + { + (*myp) ++; + callme (); /* set breakpoint thread 3 here */ + } + + pthread_exit (NULL); +} + +void * +child_function_2 (void *arg) +{ + int my_number = (long) arg; + volatile int *myp = (int *) &args[my_number]; + + pthread_barrier_wait (&barrier); + + while (*myp > 0) + { + (*myp) ++; + callme (); /* set breakpoint thread 2 here */ + } + + pthread_exit (NULL); +} + +static int +wait_threads (void) +{ + return 1; /* in wait_threads */ +} + +int +main () +{ + int res; + long i; + + /* Call these early so that PLTs for these are resolved soon, + instead of in the threads. RTLD_NOW should work as well. */ + usleep (0); + pthread_barrier_init (&barrier, NULL, 1); + pthread_barrier_wait (&barrier); + + pthread_barrier_init (&barrier, NULL, 2); + + i = 0; + args[i] = 1; + res = pthread_create (&child_thread_2, + NULL, child_function_2, (void *) i); + pthread_barrier_wait (&barrier); + callme (); + + i = 1; + args[i] = 1; + res = pthread_create (&child_thread_3, + NULL, child_function_3, (void *) i); + pthread_barrier_wait (&barrier); + wait_threads (); /* set wait-threads breakpoint here */ + + pthread_join (child_thread_2, NULL); + pthread_join (child_thread_3, NULL); + + exit(EXIT_SUCCESS); +} diff --git a/gdb/testsuite/gdb.threads/multiple-step-overs.exp b/gdb/testsuite/gdb.threads/multiple-step-overs.exp new file mode 100644 index 00000000000..c79e5d2d926 --- /dev/null +++ b/gdb/testsuite/gdb.threads/multiple-step-overs.exp @@ -0,0 +1,80 @@ +# Copyright (C) 2011-2014 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Test that GDB steps over all breakpoints of threads not the stepping +# thread, before actually proceeding with the stepped thread. + +standard_testfile +set executable ${testfile} + +if [target_info exists gdb,nosignals] { + verbose "Skipping ${testfile}.exp because of nosignals." + return -1 +} + +if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" \ + executable [list debug "incdir=${objdir}"]] != "" } { + return -1 +} + +# Prepare environment for test. PREFIX is used as prefix in test +# messages. + +proc setup { prefix } { + global executable + + with_test_prefix $prefix { + clean_restart $executable + + if ![runto_main] { + return -1 + } + + gdb_breakpoint [gdb_get_line_number "set wait-threads breakpoint here"] + gdb_continue_to_breakpoint "run to breakpoint" + gdb_test "info threads" "3 .* 2 .*\\\* 1.*" "info threads shows all threads" + + gdb_test_no_output "set scheduler-locking on" + + gdb_breakpoint [gdb_get_line_number "set breakpoint thread 3 here"] + gdb_breakpoint [gdb_get_line_number "set breakpoint thread 2 here"] + + gdb_test "thread 3" "Switching.*" + gdb_continue_to_breakpoint "run to breakpoint in thread 3" + gdb_test "p *myp = 0" " = 0" "unbreak loop in thread 3" + + gdb_test "thread 2" "Switching.*" + gdb_continue_to_breakpoint "run to breakpoint in thread 2" + gdb_test "p *myp = 0" " = 0" "unbreak loop in thread 2" + + # Switch back to thread 1 and disable scheduler locking. + gdb_test "thread 1" "Switching.*" + gdb_test_no_output "set scheduler-locking off" + + # Now all 3 threads are stopped for a breakpoint that needs to + # be stepped over before thread 1 is resumed. + } +} + +setup "step" +gdb_test "step" "in wait_threads .*" + +setup "next" +gdb_test "set debug infrun 1" ".*" +gdb_test "next" "pthread_join.*" + +setup "continue" +gdb_breakpoint [gdb_get_line_number "EXIT_SUCCESS"] +gdb_test "continue" "EXIT_SUCCESS.*" diff --git a/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp b/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp index bf5ea609ac6..c46dad26e0b 100644 --- a/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp +++ b/gdb/testsuite/gdb.threads/signal-while-stepping-over-bp-other-thread.exp @@ -107,7 +107,7 @@ gdb_test "set debug infrun 1" gdb_test \ "step" \ - ".*prepare_to_proceed \\(step=1\\), switched to.*signal arrived while stepping over breakpoint.*switching back to stepped thread.*stepped to a different line.*callme.*" \ + ".*need to step-over.*resume \\(step=1.*signal arrived while stepping over breakpoint.*switching back to stepped thread.*stepped to a different line.*callme.*" \ "step" set cnt_after [get_value "args\[$my_number\]" "get count after step"]