From: K. Richard Pixley <rich@cygnus>
Date: Thu, 4 Apr 1991 18:37:36 +0000 (+0000)
Subject: Initial revision
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=99a42820d9dc6b393e98446f726f51c702fce28b;p=binutils-gdb.git

Initial revision
---

diff --git a/bfd/Makefile.in b/bfd/Makefile.in
new file mode 100644
index 00000000000..5741343eb5c
--- /dev/null
+++ b/bfd/Makefile.in
@@ -0,0 +1,163 @@
+#
+# Copyright (C) 1990, 1991 Free Software Foundation, Inc.
+#
+# This file is part of BFD, the Binary File Diddler.
+#
+# BFD is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+#
+# BFD is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with BFD; see the file COPYING.  If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+# $Id$
+
+srcdir = .
+
+RANLIB = ranlib
+AR = 
+INCDIR = $(srcdir)/../include-cygnus
+CSEARCH = -I$(INCDIR)
+
+# These things now done from host specific Makefile fragments.
+#CSWITCHES = -g  # -Wall
+#CDEFINES = # -DHOST_SYS=AIX_SYS # -DCOFF_TIMESTAMP -DANSI_LIBRARIES
+
+#### host and target dependent Makefile fragments come in here.
+
+###
+
+TARG = libbfd.a
+CFLAGS = -g $(CDEFINES) $(CSEARCH) $(CSWITCHES) -DINTEL960VERSION
+
+
+BFD_LIBS = libbfd.o opncls.o bfd.o archive.o targets.o cache.o archures.o
+
+BFD_BACKENDS = sunos.o icoff.o b.out.o # srec.o # bcs88kcoff.o
+
+BFD_H=$(INCDIR)/bfd.h
+SYSDEP_H=$(INCDIR)/sysdep.h
+
+# C source files that correspond to .o's.
+CFILES = libbfd.c opncls.c bfd.c archive.c targets.c cache.c archures.c \
+	 sunos.c icoff.c b.out.c # srec.c # bcs88kcoff.c
+
+all: $(TARG) 
+
+POINTOS = $(BFD_LIBS) $(BFD_BACKENDS)
+
+$(TARG): $(POINTOS)
+	 rm -f $(TARG)
+	 ar clq $(TARG) $(BFD_LIBS) $(BFD_BACKENDS)
+	 ranlib $(TARG)
+
+tags etags: TAGS
+
+TAGS: .force
+	etags $(INCDIR)/*.h *.h *.c
+
+clean:
+	rm -f $(BFD_LIBS) $(BFD_BACKENDS) *~ core libbfd.a
+
+clobber realclean: clean
+	rm -f libbfd.a TAGS
+
+$(BFD_LIBS) $(BFD_BACKENDS):  libbfd.h $(BFD_H)
+
+saber:
+	#suppress 65 on bfd_map_over_sections 
+	#suppress 66 on bfd_map_over_sections 
+	#suppress 67 on bfd_map_over_sections 
+	#suppress 68 on bfd_map_over_sections 
+	#suppress 69 on bfd_map_over_sections 
+	#suppress 70 on bfd_map_over_sections 
+	#suppress 110 in bfd_map_over_sections 
+	#suppress 112 in bfd_map_over_sections 
+	#suppress 530 
+	#suppress 590 in swap_exec_header 
+	#suppress 590 in _bfd_dummy_core_file_matches_executable_p 
+	#suppress 590 in bfd_dont_truncate_arname
+	#suppress 590 on ignore 
+	#suppress 590 on abfd 
+	#setopt load_flags $(CFLAGS)
+	#load $(CFILES)
+
+archive.o : archive.c libbfd.h $(BFD_H) $(SYSDEP_H)  
+archures.o : archures.c $(BFD_H) $(SYSDEP_H) archures.h 
+b.out.o : b.out.c libbfd.h $(BFD_H) $(SYSDEP_H) liba.out.h archures.h 
+bcs88kcoff.o : bcs88kcoff.c libbfd.h $(BFD_H) $(SYSDEP_H) libcoff.h coff-code.h archures.h 
+bfd.o : bfd.c libbfd.h $(BFD_H) $(SYSDEP_H)     
+cache.o : cache.c libbfd.h $(BFD_H) $(SYSDEP_H)     
+coff.o : coff.c  
+cplus-dem.o : cplus-dem.c  
+filemode.o : filemode.c 
+icoff.o : icoff.c libbfd.h $(BFD_H) $(SYSDEP_H) libcoff.h coff-code.h archures.h 
+libbfd.o : libbfd.c libbfd.h $(BFD_H) $(SYSDEP_H)      
+misc.o : misc.c 
+opncls.o : opncls.c libbfd.h $(BFD_H) $(SYSDEP_H)     
+sunos.o : sunos.c libbfd.h $(BFD_H) $(SYSDEP_H) liba.out.h
+targets.o : targets.c libbfd.h $(BFD_H) $(SYSDEP_H)      
+
+#-----------------------------------------------------------------------------
+#		'STANDARD' GNU/960 TARGETS BELOW THIS POINT
+#
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#-----------------------------------------------------------------------------
+
+ver960.c: FORCE
+	rm -f ver960.c
+	echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
+
+
+# This target should be invoked before building a new release.
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#
+roll:
+	@V=`cat VERSION`		; \
+	MAJ=`sed 's/\..*//' VERSION`	; \
+	MIN=`sed 's/.*\.//' VERSION`	; \
+	V=$$MAJ.`expr $$MIN + 1`	; \
+	rm -f VERSION			; \
+	echo $$V >VERSION		; \
+	echo Version $$V
+
+# Dummy target to force execution of dependent targets.
+#
+.force:
+FORCE:
+
+# 'G960BASE' will be defined at invocation
+install:
+	make ${TARG} OPT=-O
+
+# Target to uncomment host-specific lines in this makefile.  Such lines must
+# have the following string beginning in column 1: #__<hostname>__#
+# Original Makefile is backed up as 'Makefile.old'.
+#
+# Invoke with:  make make HOST=xxx
+#
+make:
+	-@if test $(HOST)x = x ; then \
+		echo 'Specify "make make HOST=???"'; \
+		exit 1; \
+	fi ; \
+	grep -s "^#The next line was generated by 'make make'" Makefile; \
+	if test $$? = 0 ; then	\
+		echo "Makefile has already been processed with 'make make'";\
+		exit 1; \
+	fi ; \
+	mv -f Makefile Makefile.old; \
+	echo "#The next line was generated by 'make make'"	 >Makefile ; \
+	echo "HOST=$(HOST)"					>>Makefile ; \
+	echo							>>Makefile ; \
+	sed "s/^#__$(HOST)__#//" < Makefile.old			>>Makefile
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
+	(cd $(srcdir) ; ./configure -host=$(host) $(target))
diff --git a/bfd/configure b/bfd/configure
new file mode 100755
index 00000000000..627867a3aa2
--- /dev/null
+++ b/bfd/configure
@@ -0,0 +1,845 @@
+#!/bin/sh
+# Do not edit this file.  It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+#!/bin/sh
+# Do not edit this file.  It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+# Configuration script template
+#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+
+#This file is part of GNU.
+
+#GNU CC is free software; you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation; either version 1, or (at your option)
+#any later version.
+
+#GNU CC is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GNU CC; see the file COPYING.  If not, write to
+#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#
+# Shell script to create proper links to machine-dependent files in
+# preparation for compiling gcc.
+#
+# Usage: configure [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET
+#
+# If configure succeeds, it leaves its status in config.status.
+# If configure fails after disturbing the status quo, 
+# 	config.status is removed.
+#
+
+progname=$0
+
+remove=rm
+hard_link=ln
+symbolic_link='ln -s'
+
+#for Test
+#remove="echo rm"
+#hard_link="echo ln"
+#symbolic_link="echo ln -s"
+
+# clear some things potentially inherited from environment.
+target=
+template=
+removing=
+norecurse=
+ansi=
+
+for arg in $*;
+do
+	case $arg in
+	-ansi | +ansi)
+		ansi=true
+		;;
+	-template=* | +template=*)
+		template=`echo $arg | sed 's/[+-]template=//'`
+		;;
+	-norecurse | +norecurse)
+		norecurse=true
+		;;
+	-rm | +rm)
+		removing=$arg
+		;;
+	-srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
+		srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
+		;;
+	-host=* | +host=* | +hos=* | +ho=* | +h=*)
+		host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
+		;; 
+	-languages=* | +languages=* | -languag=* | +languag=* | langua=* \
+		| +langua=* | -langu=* | +langu=* | -lang=* | +lang=* | -lan=* \
+		| +lan=* | -la=* | +la=* | -l=* | +l=*)
+		languages="$languages `echo $arg | sed 's/[+-]l[a-z]*=//'`"
+		;;
+	-gas | +gas | +ga | +g)
+		gas=yes
+		;;
+	-nfp | +nfp | +nf | +n)
+		nfp=yes
+		;;
+	*)
+# Allow configure HOST TARGET
+		if [ x$host = x ] ; then host=$target ; fi
+		target=$arg
+		;;
+	esac
+done
+
+# process host and target only if not rebuilding configure itself.
+if [ -z "$template" ]
+then
+	# Complain if an arg is missing
+	if [ x$target = x ]
+	then
+		echo "Usage: $progname [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET"
+		echo -n "Where HOST and TARGET are something like "
+		echo "\`vax', \`sun3', \`encore', etc."
+		if [ -r config.status ]
+		then
+			cat config.status
+		fi
+		exit 1
+	fi
+
+	# Default other arg
+	if [ x$host = x ]
+	then
+		host=$target
+	fi
+
+	# Decode the host machine, then the target machine.
+	# For the host machine, we save the xm_file variable as host_xm_file;
+	# then we decode the target machine and forget everything else
+	# that came from the host machine.
+	for machine in $host $target; do
+
+		# Separate what the user gave into CPU/company and OS (if any).
+		basic_machine=`echo $machine | sed 's/-[^-]*$//'`
+		if [ $basic_machine != $machine ]
+		then os=`echo $machine | sed 's/[^-]*-/-/'`
+		else os=; fi
+
+		# Decode aliases for certain machine/company combinations.
+		case $basic_machine in
+			iris | iris4d)
+				basic_machine=mips/sgi
+				;;
+			news | news800)
+				basic_machine=m68k/sony
+				;;
+			3b1 | 7300 | 7300/att | att-7300)
+				basic_machine=m68k/att
+				;;
+			delta | 3300 | motorola-3300 | motorola-delta \
+			      | 3300/motorola | delta/motorola)
+				basic_machine=m68k/motorola
+				;;
+			vax/dec)
+				basic_machine=vax
+				;;
+			balance)
+				basic_machine=ns32k/sequent
+				;;
+			symmetry)
+				basic_machine=i386/sequent
+				;;
+			sun2)
+				basic_machine=m68000/sun
+				;;
+			sun3)
+				basic_machine=m68k/sun
+				;;
+			sun4)
+				basic_machine=sparc/sun
+				;;
+			sun386 | sun386i)
+				basic_machine=i386/sun
+				;;
+			ps2)
+				basic_machine=i386/ibm
+				;;
+			next)
+				basic_machine=m68k/next
+				;;
+			hp9k3[2-9][0-9])
+				basic_machine=m68k/hp
+				;;
+			hp9k31[0-9] | hp9k2[0-9][0-9])
+				basic_machine=m68000/hp
+				;;
+			isi68)
+				basic_machine=m68k/isi
+				;;
+			apollo68)
+				basic_machine=m68k/apollo
+				;;
+			altos | altos3068)
+				basic_machine=m68k/altos
+				;;
+			miniframe)
+				basic_machine=m68000/convergent
+				;;
+			tower | tower-32)
+				basic_machine=m68k/ncr
+				;;
+			news-3600 | risc-news)
+				basic_machine=mips/sony
+				;;
+			decstation | decstation-3100 | pmax)
+				basic_machine=mips/dec
+				;;
+			gmicro)
+				basic_machine=tron
+				;;
+			convex-c1)
+				basic_machine=c1/convex
+				;;
+			convex-c2)
+				basic_machine=c2/convex
+				;;
+		esac
+
+		# Decode manufacturer-specific aliases for certain operating systems.
+
+		case $os in
+			-newsos*)
+				os=-bsd
+				;;
+			-ultrix*)
+				os=-bsd
+				;;
+			-dynix*)
+				os=-bsd
+				;;
+			-ctix*)
+				os=-sysv
+				;;
+		esac
+
+		machine=$basic_machine$os
+
+		cpu_type=
+		xm_file=
+		tm_file=
+		make_var_file=
+
+		case $machine in
+		vax | vax-bsd*)			# vaxen running BSD
+			;;
+		vax-vms | vms)			# vaxen running VMS
+			cpu_type=vax
+			xm_file=xm-vms.h
+			tm_file=tm-vms.h
+			;;
+		vax-sysv* | vaxv)		# vaxen running system V
+			cpu_type=vax
+			xm_file=xm-vaxv.h
+			tm_file=tm-vaxv.h
+			;;
+		tahoe | tahoe-bsd*)		# tahoe running BSD
+			;;
+		tahoe/harris*)			# Harris tahoe, using COFF.
+			cpu_type=tahoe
+			;;
+		i386/sequent* | i386/sequent-bsd*)  # 80386 from Sequent
+			cpu_type=i386
+			xm_file=xm-i386.h
+			tm_file=tm-seq386.h
+			;;
+		i386-mach | i386/*-mach)
+			cpu_type=i386
+			xm_file=xm-i386.h
+			tm_file=tm-i386gas.h
+			;;
+		i386/sco | i386/sco-sysv* | i386/*-sco) # 80386 running SCO system
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			tm_file=tm-i386sco.h
+			make_var_file=make-i386sco
+			;;
+		i386/isc | i386/isc-sysv* | i386/*-isc)	# 80386 running ISC system
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			tm_file=tm-i386isc.h
+			make_var_file=make-i386isc
+			;;
+		i386/ibm | i386-aix | i386/ibm-aix)	# IBM PS/2 running AIX
+			cpu_type=i386
+			tm_file=tm-i386v.h
+			xm_file=xm-i386v.h
+			make_var_file=make-i386v
+			;;
+		i386/sun*)
+			cpu_type=i386
+			xm_file=xm-sun386i.h
+			tm_file=tm-sun386i.h
+			;;
+		i386-sysv4 | i386/*-sysv4 | i386v4)  # Intel 80386's running system V.4
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			make_var_file=make-i386v
+			tm_file=tm-i386v4.h
+			;;
+		i386-sysv* | i386/*-sysv* | i386v)  # Intel 80386's running system V
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			make_var_file=make-i386v
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-i386gas.h
+			else
+				tm_file=tm-i386v.h
+			fi
+			;;
+		i860 | i860-sysv* | i860/*-sysv*)
+			cpu_type=i860
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-i860g.h
+			else
+				tm_file=tm-i860.h
+			fi
+			;;
+		i860-bsd* | i860/*-bsd*)
+			cpu_type=i860
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-i860bsdg.h
+			else
+				tm_file=tm-i860bsd.h
+			fi
+			;;
+		sparc | sparc/* | sparc-*os4 | sparc/*-*os4)
+			cpu_type=sparc
+			tm_file=tm-sparc.h
+			;;
+		sparc-*os3 | sparc/*-*os3)
+			cpu_type=sparc
+			tm_file=tm-sun4os3.h
+			;;
+		m68k/next)
+			cpu_type=m68k
+			tm_file=tm-next.h
+			out_file=out-next.c
+			xm_file=xm-next.h
+			;;
+		m68k/sun-*os3)
+			cpu_type=m68k
+			if [ x$nfp = xyes ]
+			then
+				tm_file=tm-sun3os3nf.h
+			else
+				tm_file=tm-sun3os3.h
+			fi
+			;;
+		m68k/sun-mach)
+			cpu_type=m68k
+			tm_file=tm-sun3mach.h
+			;;
+		m68k/sun | m68k/sun-*os4)
+			cpu_type=m68k
+			if [ x$nfp = xyes ]
+			then
+				tm_file=tm-sun3nfp.h
+			else
+				tm_file=tm-sun3.h
+			fi
+			;;
+		m68k/hp | m68k/hp-hpux*)	# HP 9000 series 300
+			cpu_type=m68k
+			xm_file=xm-hp9k320.h
+			if [ x$gas = xyes ]
+			then
+				make_var_file=make-hp9k320g
+				tm_file=tm-hp9k320g.h
+			else
+				make_var_file=make-hp9k320
+				tm_file=tm-hp9k320.h
+			fi
+			;;
+		m68k/hp-bsd*)			# HP 9000/3xx running Berkeley Unix
+			cpu_type=m68k
+			tm_file=tm-hp9k3bsd.h
+			;;
+		m68k/isi | m68k/isi-bsd*)
+			cpu_type=m68k
+			if [ x$nfp = xyes ]
+			then
+				tm_file=tm-isi68-nfp.h
+			else
+				tm_file=tm-isi68.h
+			fi
+			;;
+		m68k/sony | m68k/sony-bsd*)
+			xm_file=xm-m68k.h
+			cpu_type=m68k
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-newsgas.h
+			else
+				tm_file=tm-news.h
+			fi
+			;;
+		m68k/altos | m68k/altos-sysv*)		   # Altos 3068
+			cpu_type=m68k
+			if [ x$gas = xyes ]
+			then
+				xm_file=xm-altos3068.h
+				tm_file=tm-altos3068.h
+			else
+				echo "The Altos is supported only with the GNU assembler" 1>&2
+				exit 1
+			fi
+			;;
+		m68k/motorola | m68k/motorola-sysv*)
+			cpu_type=m68k
+			tm_file=tm-mot3300.h
+			xm_file=xm-mot3300.h
+			;;
+		m68k/crds | m68k/crds-unos | m68k-unos | crds | unos)
+			cpu_type=m68k
+			xm_file=xm-crds.h
+			make_var_file=make-crds
+			tm_file=tm-crds.h
+			;;
+		m68k/apollo)
+			cpu_type=m68k
+			make_var_file=make-apollo68
+			tm_file=tm-apollo68.h
+			;;
+		m68k/ncr | m68k/ncr-sysv*)	# NCR Tower 32 SVR3
+			cpu_type=m68k
+			tm_file=tm-tower-as.h
+			xm_file=xm-tower.h
+			;;
+		m68000/sun | m68000/sun-*os3)
+			cpu_type=m68k
+			tm_file=tm-sun2.h
+			;;
+		m68000/sun-*os4)
+			cpu_type=m68k
+			tm_file=tm-sun2os4.h
+			;;
+		m68000/hp | m68000/hp-hpux*)	# HP 9000 series 300
+			cpu_type=m68k
+			xm_file=xm-hp9k310.h
+			if [ x$gas = xyes ]
+			then
+				make_var_file=make-hp9k320g
+				tm_file=tm-hp9k310g.h
+			else
+				make_var_file=make-hp9k320
+				tm_file=tm-hp9k310.h
+			fi
+			;;
+		m68000/hp-bsd*)			# HP 9000/200 running BSD
+			cpu_type=m68k
+			tm_file=tm-hp9k2bsd.h
+			make_var_file=make-hp9k2bsd
+			;;
+		m68000/att | m68000/att-sysv*)
+			cpu_type=m68k
+			xm_file=xm-3b1.h
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-3b1g.h
+			else
+				tm_file=tm-3b1.h
+			fi
+			;;
+		m68000/convergent | m68000/convergent-sysv*)
+			cpu_type=m68k
+			xm_file=xm-3b1.h
+			tm_file=tm-ctix.h
+			;;
+		ns32k/sequent | ns32k/sequent-bsd*)
+			cpu_type=ns32k
+			tm_file=tm-sequent.h
+			;;
+		ns32k/encore | ns32k/encore-bsd* | encore | encore-bsd*)
+			cpu_type=ns32k
+			tm_file=tm-encore.h
+			;;
+		ns32k-genix* | ns32k/*-genix* | genix)
+			cpu_type=ns32k
+			xm_file=xm-genix.h
+			make_var_file=make-genix
+			tm_file=tm-genix.h
+			;;
+		merlin)
+			cpu_type=ns32k
+			;;
+		m88k/dg | m88k/dg-dgux* | m88k-dgux*)
+			cpu_type=m88k
+			xm_file=xm-m88kdgux.h
+			make_var_file=make-m88kdgux
+			tm_file=tm-m88kdgux.h
+			;;
+		m88k-v88r32 | m88k/*-v88r32)
+			cpu_type=m88k
+			tm_file=tm-v88r32.h
+			xm_file=xm-v88r32.h
+			;;
+		m88k-sysv* | m88k/*-sysv*)
+			cpu_type=m88k
+			tm_file=tm-m88ksvr4.h
+			xm_file=xm-m88ksvr4.h
+			;;
+		alliant | alliant/alliant)	# Alliant FX/8
+			cpu_type=alliant
+			tm_file=tm-alliant.h
+			;;
+		c1/convex)			# Convex C1
+			if [ -r /usr/include/stdlib.h ]
+			then
+				tm_file=tm-convex1.h
+			else
+				tm_file=tm-conv1os7.h
+			fi
+			cpu_type=convex
+			;;
+		c2/convex)			# Convex C2
+			if [ -r /usr/include/stdlib.h ]
+			then
+				tm_file=tm-convex2.h
+			else
+				tm_file=tm-conv2os7.h
+			fi
+			cpu_type=convex
+			;;
+		mips/sgi | mips/sgi-sysv*)	# Mostly like a MIPS.
+			cpu_type=mips
+			tm_file=tm-iris.h
+			xm_file=xm-iris.h
+			;;
+		mips | mips/mips)		# Default MIPS environment.
+			;;
+		mips/dec | mips/dec-bsd*)	# Decstation.
+			cpu_type=mips
+			tm_file=tm-decstatn.h
+			;;
+		mips/sony | mips/sony-bsd*)	# Sony NEWS 3600 or risc/news.
+			cpu_type=mips
+			tm_file=tm-mips-news.h
+			;;
+		mips/*-sysv* | mips-sysv*)	# SYSV variant of MIPS system.
+			cpu_type=mips
+			tm_file=tm-mips-sysv.h
+			;;
+		mips/*-bsd* | mips-bsd*)	# BSD 4.3 variant of MIPS system.
+			cpu_type=mips
+			tm_file=tm-mips-bsd.h
+			;;
+		pyramid | pyramid/* | pyramid-*)
+			cpu_type=pyr
+			tm_file=tm-pyr.h
+			;;
+		tron | tron/*)
+			cpu_type=gmicro
+			tm_file=tm_gmicro.h
+			;;
+		a29k-bsd* | a29k/*-bsd*)
+			cpu_type=a29k
+			tm_file=tm-a29kunix.h
+			;;
+		i960)				# Default i960 environment.
+			;;
+	#	370)
+	#		;;
+		esac
+		if [ x$pass1done = x ]
+		then
+			if [ x$cpu_type = x ]; then cpu_type=$host; fi
+			if [ x$xm_file = x ]; then host_xm_file=xm-$cpu_type.h
+			else host_xm_file=$xm_file
+			fi
+			if [ x$make_var_file = x ]
+			then make_var_file=make-$cpu_type; fi
+			host_make_var_file=$make_var_file
+			pass1done=yes
+		fi
+	done
+
+	# Default the machine-specific variables that were not explicitly set.
+	if [ x$cpu_type = x ]
+	then cpu_type=$target; fi
+
+	if [ x$tm_file = x ]
+	then tm_file=tm-$target.h; fi
+
+	md_file=${cpu_type}.md
+
+	if [ x$out_file = x ]
+	then out_file=out-$cpu_type.c; fi
+fi
+
+#### configure.in files go here.
+### end of configure.in
+
+# are we rebuilding config itself?
+if [ -n "$template" ]
+then
+	if [ ! -r $template ]
+	then
+		echo "Can't find template ${template}."
+		exit 1
+	fi
+
+	mv configure configure.old
+	echo "#!/bin/sh" > configure
+	echo "# Do not edit this file.  It is generated automatically from configure.in" >> configure
+	echo "# and a configure template." >> configure
+	echo "configdirs=" >> configure
+	echo >> configure
+
+	if [ -r configure.in ]
+	then
+		sed -e "/^####/  r configure.in" $template >> configure
+	else
+		cat $template >> configure
+	fi
+
+	chmod a+x configure
+	rm configure.old
+#	echo Rebuilt configure in `pwd` from ${template}.
+	echo Rebuilt configure in `pwd`
+
+	if [ x$norecurse = x ]
+	then
+		while [ -n "$configdirs" ]
+		do
+			# set configdir to car of configdirs, configdirs to cdr of configdirs
+			set $configdirs; configdir=$1; shift; configdirs=$*
+
+			if [ "`echo ${configdir}.*`" != "${configdir}.*" ]
+			then
+				targetspecificdirs=${configdir}.*
+			else
+				targetspecificdirs=
+			fi
+
+			for i in ${configdir} ${targetspecificdirs}
+			do
+				if [ -r $i/configure ]
+				then
+					(cd $i ;
+						configure +template=${template})
+				else
+					echo No configure script in `pwd`/$i
+				fi
+			done
+		done
+	fi
+
+	exit 0
+fi
+
+# Temporarily, we support only direct subdir builds.
+hostsubdir=Host-$host
+targetsubdir=Target-$target
+
+if [ -n "$removing" ]
+then
+	rm -rf $hostsubdir/$targetsubdir
+
+	if [ -z "`(ls $hostsubdir) 2>&1 | grep Target-`" ]
+	then
+		rm -rf $hostsubdir
+	fi
+else
+	if [ ! -d $hostsubdir ] ; then mkdir $hostsubdir ; fi
+	cd $hostsubdir
+
+	if [ ! -d $targetsubdir ] ; then mkdir $targetsubdir ; fi
+	cd $targetsubdir
+
+	srcdir=../..
+
+	## Find the source files, if location was not specified.
+	#if [ x$srcdir = x ]
+	#then
+	#	srcdirdefaulted=1
+	#	srcdir=.
+	#	if [ ! -r ${srctrigger} ]
+	#	then
+	#		srcdir=..
+	#	fi
+	#fi
+	#
+	#if [ ! -r ${srcdir}/${srctrigger} ]
+	#then
+	#	if [ x$srcdirdefaulted = x ]
+	#	then
+	#	  echo "$progname: Can't find ${srcname} sources in \`${srcdir}'." 1>&2
+	#	else
+	#	  echo "$progname: Can't find ${srcname} sources in \`.' or \`..'." 1>&2
+	#	fi
+	#	exit 1
+	#fi
+
+
+
+	# Set up the list of links to be made.
+	# $links is the list of link names, and $files is the list of names to link to.
+
+	# Make the links.
+	while [ -n "$files" ]
+	do
+		# set file to car of files, files to cdr of files
+		set $files; file=$1; shift; files=$*
+		set $links; link=$1; shift; links=$*
+
+		if [ ! -r ${srcdir}/config/$file ]
+		then
+			echo "$progname: cannot create a link \`$link'," 1>&2
+			echo "since the file \`config/$file' does not exist." 1>&2
+			exit 1
+		fi
+
+		$remove -f $link
+		rm -f config.status
+		# Make a symlink if possible, otherwise try a hard link
+		$symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link
+
+		if [ ! -r $link ]
+		then
+			echo "$progname: unable to link \`$link' to \`${srcdir}/config/$file'." 1>&2
+			exit 1
+		fi
+		echo "Linked \`$link' to \`${srcdir}/config/$file'."
+	done
+
+	# Install a makefile, and make it set VPATH
+	# if necessary so that the sources are found.
+	# Also change its value of srcdir.
+	# Also create a .gdbinit file which runs the one in srcdir
+	# and tells GDB to look there for source files.
+	case $srcdir in
+	.)
+		;;
+	*)
+		echo "VPATH = ${srcdir}" > x
+		cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
+		rm x
+		echo "dir ." > .gdbinit
+		echo "dir ${srcdir}" >> .gdbinit
+		echo "source ${srcdir}/.gdbinit" >> .gdbinit
+		;;
+	esac
+
+	host_var_file=hmake-${host}
+	target_var_file=tmake-${target}
+
+	# Conditionalize the makefile for this machine.
+	if [ -f ${srcdir}/config/${host_var_file} ]
+	then
+		sed -e "/^####/  r ${srcdir}/config/${host_var_file}" Makefile.in > Makefile.tem
+	else
+		cp Makefile.in Makefile.tem
+	fi
+
+	if [ -f ${srcdir}/config/${target_var_file} ]
+	then
+		sed -e "/^####/  r ${srcdir}/config/${target_var_file}" Makefile.tem > Makefile.tem1
+		mv Makefile.tem1 Makefile.tem
+	fi
+
+	# Remove all formfeeds, since some Makes get confused by them.
+	sed "s///" Makefile.tem >> Makefile.tem1
+	mv Makefile.tem1 Makefile.tem
+
+	# reset SUBDIRS
+	sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile.tem > Makefile.tem1
+	mv Makefile.tem1 Makefile.tem
+
+	# reset NONSUBDIRS
+	sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile.tem > Makefile.tem1
+	mv Makefile.tem1 Makefile.tem
+
+	# Delete the intermediate files
+	if [ x$srcdir != x. ] ; then rm Makefile.in ; fi
+
+	rm -f Makefile
+
+	# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
+	if [ x$host != x$target ]
+	then
+		echo "CROSS=-DCROSS_COMPILE" > Makefile
+		echo "ALL=start.encap" >> Makefile
+	else
+		echo "ALL=all.internal" > Makefile
+	fi
+
+	# set target and host
+	echo "host = $host" >> Makefile
+	echo "target = $target" >> Makefile
+
+	cat Makefile.tem >> Makefile
+	rm Makefile.tem
+
+	using=
+	if [ -f ${srcdir}/config/${host_var_file} ]
+	then
+		using=" using \"${host_var_file}\""
+	fi
+
+	if [ -f ${srcdir}/config/${target_var_file} ]
+	then
+		if [ -z "${using}" ]
+		then
+			andusing=" using \"${target_var_file}\""
+		else
+			andusing="${using} and \"${target_var_file}\""
+		fi
+	else
+		andusing=${using}
+	fi
+
+	echo "Created \"Makefile\""${andusing}.
+
+	if [ x$host = x$target ]
+	then
+		echo "Links are now set up for use with a $target." \
+			| tee ${srcdir}/config.status
+	else
+		echo "Links are now set up for host $host and target $target." \
+			| tee ${srcdir}/config.status
+	fi
+
+	cd ${srcdir}
+fi
+
+# If there are subdirectories, then recurse. 
+
+if [ x$norecurse != x ] ; then exit 0 ; fi
+
+while [ -n "$configdirs" ]
+do
+	# set configdir to car of configdirs, configdirs to cdr of configdirs
+	set $configdirs; configdir=$1; shift; configdirs=$*
+
+	# check for target override
+	targetspecificdir=${configdir}.${target}
+	if [ -d ${targetspecificdir} ]
+	then
+		configdir=${targetspecificdir}
+	fi
+
+	echo Configuring ${configdir}...
+	(cd ${configdir} ;
+		configure +host=${host} ${target} ${removing}) \
+		| sed 's/^/	/'
+done
+
+exit 0
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
new file mode 100644
index 00000000000..fc04fc4052b
--- /dev/null
+++ b/binutils/Makefile.in
@@ -0,0 +1,189 @@
+### Makefile for GNU binary-file utilities
+
+#$Id$
+
+## Configuration options
+# These should be all you need set before compiling
+
+# these two should be the same program
+AR=ar
+RANLIB=ranlib
+
+# copy and strip should be the same program
+COPY=copy
+STRIP=strip
+
+# These should all be the same program too.
+SIZE=size
+NM=nm
+OBJDUMP=objdump
+
+PROGS = $(SIZE) $(COPY) $(OBJDUMP) $(NM) $(AR) $(STRIP) $(RANLIB)
+
+srcdir = .
+BASEDIR = $(srcdir)/../..
+
+# Let rich do this for now:
+LIBDIR  = $(BASEDIR)/bfd/$(HOST)
+
+#__sun3__#DEFINES=-DHOST_SYS=SUN3_SYS
+#__sun3__#LDFLAGS	= -Bstatic
+
+#__sun4__#DEFINES=-DHOST_SYS=SUN4_SYS
+#__sun4__#LDFLAGS	= -Bstatic
+
+#__sun386i__#LDFLAGS	= -Bstatic
+
+#__rs6000__#DEFINES=-Daix
+#__rs6000__#ALLOCA = alloca.o
+
+#__i386v__#ALLOCA = alloca.o
+#__i386v__#DEFINES=-DUSG
+
+INCDIR = $(BASEDIR)/include-cygnus
+
+CFLAGS  = -g -I$(INCDIR) $(DEFINES) 
+
+
+bindir=$(BASEDIR)/bin
+
+DISASMS = m68k-pinsn.o i960-pinsn.o sparc-pinsn.o
+#
+## Random definitions
+# Hopefully all these may be flushed once we get configuration down pat.
+
+# alloca only needed for systems which don't have it and when cc != gcc.
+# ALLOCA = alloca.o
+
+# nm tries to malloc enough space for the string table.  The old GNU malloc
+# rounds this up to a power of two (e.g. 5M becomes 8M), and so it might 
+# fail unnecessarily.  I've also seen some Unix malloc's fail, even when
+# there is enough memory.  So use the new GNU malloc.
+# MALLOC = gmalloc.o
+
+# Use the GNU getopt unless you have problems with it.
+# The IRIS version could probably benefit from being assembled with
+# libmalloc rather than the ordinary malloc.
+GNU_GETOPT = getopt.o $(ALLOCA)
+GNU_GETOPT_LONG = getopt1.o $(GNU_GETOPT)
+
+# This is supposed to become part of the standard GNU libs, whatever
+# that means.
+FILEMODE = filemode.o
+
+
+
+# Code shared by all the binutils.
+BULIBS = bucomm.o version.o
+
+ADDL_LIBS = $(GNU_GETOPT_LONG) $(MALLOC) $(FILEMODE)  $(BULIBS)
+
+BFD = $(LIBDIR)/libbfd.a
+#
+## The rules
+
+all: $(ADDL_LIBS) $(PROGS)
+
+$(SIZE): $(ADDL_LIBS) size.o $(BFD)
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $(SIZE) size.o $(ADDL_LIBS) $(BFD)
+
+$(COPY): $(ADDL_LIBS) copy.o $(BFD)
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $(COPY) copy.o $(ADDL_LIBS) $(BFD)
+
+$(NM): $(ADDL_LIBS) nm.o $(BFD)
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $(NM) nm.o $(MALLOC) $(ADDL_LIBS) $(BFD)
+
+$(OBJDUMP): $(ADDL_LIBS) size.o objdump.o $(DISASMS) $(BFD)
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJDUMP) objdump.o $(DISASMS) $(ADDL_LIBS) $(BFD)
+
+$(AR): $(ADDL_LIBS) ar.o $(BFD)
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $(AR) ar.o $(MALLOC) $(ADDL_LIBS) $(BFD)
+
+$(RANLIB): $(AR) 
+	-rm -f $(RANLIB)
+	-ln $(AR) $(RANLIB)
+
+$(STRIP): $(COPY)
+	-rm -f $(STRIP)
+	-ln $(COPY) $(STRIP)
+
+clean:
+	-rm -f *.o *~ \#* core $(PROGS) TAGS
+
+etags tags: TAGS
+
+TAGS: .force
+	etags $(INCDIR)/*.h $(BFDSRC)/*.[hc] *.[hc]
+
+realclean: clean
+	-rm -f $(PROGS) TAGS
+
+install: $(PROGS)
+	for prog in $(PROGS); do \
+		rm -f $G960BASE/bin/$$prog-new; cp $$prog $$G960BASE/bin/$$prog-new ; \
+	done
+
+
+bucomm.o: bucomm.c
+version.o: version.c
+size.o: size.c
+copy.o: copy.c
+objdump.o: objdump.c
+m68k-pinsn.o: m68k-pinsn.c
+m68k-pinsn.o: ./m68k-opcode.h
+i960-pinsn.o: i960-pinsn.c
+sparc-pinsn.o: sparc-pinsn.c
+sparc-pinsn.o: ./sparc-opcode.h
+nm.o: nm.c
+ar.o: ar.c
+strip.o: strip.c
+
+
+#-----------------------------------------------------------------------------
+#		'STANDARD' GNU/960 TARGETS BELOW THIS POINT
+#
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#-----------------------------------------------------------------------------
+
+ver960.c: FORCE
+	rm -f ver960.c
+	echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
+
+
+# Dummy target to force execution of dependent targets.
+#
+.force:
+FORCE:
+
+# Target to uncomment host-specific lines in this makefile.  Such lines must
+# have the following string beginning in column 1: #__<hostname>__#
+# Original Makefile is backed up as 'Makefile.old'.
+#
+# Invoke with:  make make HOST=xxx
+#
+make:
+	-@if test $(HOST)x = x ; then \
+		echo 'Specify "make make HOST=???"'; \
+		exit 1; \
+	fi ; \
+	grep -s "^#The next line was generated by 'make make'" Makefile; \
+	if test $$? = 0 ; then	\
+		echo "Makefile has already been processed with 'make make'";\
+		exit 1; \
+	fi ; \
+	mv -f Makefile Makefile.old; \
+	echo "#The next line was generated by 'make make'"	 >Makefile ; \
+	echo "HOST=$(HOST)"					>>Makefile ; \
+	echo							>>Makefile ; \
+	sed "s/^#__$(HOST)__#//" < Makefile.old			>>Makefile
+
+#
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
+	(cd $(srcdir) ; ./configure -host=$(host) $(target))
+
+### Local Variables: ***
+### mode:fundamental ***
+### page-delimiter: "^#" ***
+### End: ***
+### end of file
diff --git a/binutils/configure b/binutils/configure
new file mode 100755
index 00000000000..627867a3aa2
--- /dev/null
+++ b/binutils/configure
@@ -0,0 +1,845 @@
+#!/bin/sh
+# Do not edit this file.  It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+#!/bin/sh
+# Do not edit this file.  It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+# Configuration script template
+#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+
+#This file is part of GNU.
+
+#GNU CC is free software; you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation; either version 1, or (at your option)
+#any later version.
+
+#GNU CC is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GNU CC; see the file COPYING.  If not, write to
+#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#
+# Shell script to create proper links to machine-dependent files in
+# preparation for compiling gcc.
+#
+# Usage: configure [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET
+#
+# If configure succeeds, it leaves its status in config.status.
+# If configure fails after disturbing the status quo, 
+# 	config.status is removed.
+#
+
+progname=$0
+
+remove=rm
+hard_link=ln
+symbolic_link='ln -s'
+
+#for Test
+#remove="echo rm"
+#hard_link="echo ln"
+#symbolic_link="echo ln -s"
+
+# clear some things potentially inherited from environment.
+target=
+template=
+removing=
+norecurse=
+ansi=
+
+for arg in $*;
+do
+	case $arg in
+	-ansi | +ansi)
+		ansi=true
+		;;
+	-template=* | +template=*)
+		template=`echo $arg | sed 's/[+-]template=//'`
+		;;
+	-norecurse | +norecurse)
+		norecurse=true
+		;;
+	-rm | +rm)
+		removing=$arg
+		;;
+	-srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
+		srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
+		;;
+	-host=* | +host=* | +hos=* | +ho=* | +h=*)
+		host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
+		;; 
+	-languages=* | +languages=* | -languag=* | +languag=* | langua=* \
+		| +langua=* | -langu=* | +langu=* | -lang=* | +lang=* | -lan=* \
+		| +lan=* | -la=* | +la=* | -l=* | +l=*)
+		languages="$languages `echo $arg | sed 's/[+-]l[a-z]*=//'`"
+		;;
+	-gas | +gas | +ga | +g)
+		gas=yes
+		;;
+	-nfp | +nfp | +nf | +n)
+		nfp=yes
+		;;
+	*)
+# Allow configure HOST TARGET
+		if [ x$host = x ] ; then host=$target ; fi
+		target=$arg
+		;;
+	esac
+done
+
+# process host and target only if not rebuilding configure itself.
+if [ -z "$template" ]
+then
+	# Complain if an arg is missing
+	if [ x$target = x ]
+	then
+		echo "Usage: $progname [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET"
+		echo -n "Where HOST and TARGET are something like "
+		echo "\`vax', \`sun3', \`encore', etc."
+		if [ -r config.status ]
+		then
+			cat config.status
+		fi
+		exit 1
+	fi
+
+	# Default other arg
+	if [ x$host = x ]
+	then
+		host=$target
+	fi
+
+	# Decode the host machine, then the target machine.
+	# For the host machine, we save the xm_file variable as host_xm_file;
+	# then we decode the target machine and forget everything else
+	# that came from the host machine.
+	for machine in $host $target; do
+
+		# Separate what the user gave into CPU/company and OS (if any).
+		basic_machine=`echo $machine | sed 's/-[^-]*$//'`
+		if [ $basic_machine != $machine ]
+		then os=`echo $machine | sed 's/[^-]*-/-/'`
+		else os=; fi
+
+		# Decode aliases for certain machine/company combinations.
+		case $basic_machine in
+			iris | iris4d)
+				basic_machine=mips/sgi
+				;;
+			news | news800)
+				basic_machine=m68k/sony
+				;;
+			3b1 | 7300 | 7300/att | att-7300)
+				basic_machine=m68k/att
+				;;
+			delta | 3300 | motorola-3300 | motorola-delta \
+			      | 3300/motorola | delta/motorola)
+				basic_machine=m68k/motorola
+				;;
+			vax/dec)
+				basic_machine=vax
+				;;
+			balance)
+				basic_machine=ns32k/sequent
+				;;
+			symmetry)
+				basic_machine=i386/sequent
+				;;
+			sun2)
+				basic_machine=m68000/sun
+				;;
+			sun3)
+				basic_machine=m68k/sun
+				;;
+			sun4)
+				basic_machine=sparc/sun
+				;;
+			sun386 | sun386i)
+				basic_machine=i386/sun
+				;;
+			ps2)
+				basic_machine=i386/ibm
+				;;
+			next)
+				basic_machine=m68k/next
+				;;
+			hp9k3[2-9][0-9])
+				basic_machine=m68k/hp
+				;;
+			hp9k31[0-9] | hp9k2[0-9][0-9])
+				basic_machine=m68000/hp
+				;;
+			isi68)
+				basic_machine=m68k/isi
+				;;
+			apollo68)
+				basic_machine=m68k/apollo
+				;;
+			altos | altos3068)
+				basic_machine=m68k/altos
+				;;
+			miniframe)
+				basic_machine=m68000/convergent
+				;;
+			tower | tower-32)
+				basic_machine=m68k/ncr
+				;;
+			news-3600 | risc-news)
+				basic_machine=mips/sony
+				;;
+			decstation | decstation-3100 | pmax)
+				basic_machine=mips/dec
+				;;
+			gmicro)
+				basic_machine=tron
+				;;
+			convex-c1)
+				basic_machine=c1/convex
+				;;
+			convex-c2)
+				basic_machine=c2/convex
+				;;
+		esac
+
+		# Decode manufacturer-specific aliases for certain operating systems.
+
+		case $os in
+			-newsos*)
+				os=-bsd
+				;;
+			-ultrix*)
+				os=-bsd
+				;;
+			-dynix*)
+				os=-bsd
+				;;
+			-ctix*)
+				os=-sysv
+				;;
+		esac
+
+		machine=$basic_machine$os
+
+		cpu_type=
+		xm_file=
+		tm_file=
+		make_var_file=
+
+		case $machine in
+		vax | vax-bsd*)			# vaxen running BSD
+			;;
+		vax-vms | vms)			# vaxen running VMS
+			cpu_type=vax
+			xm_file=xm-vms.h
+			tm_file=tm-vms.h
+			;;
+		vax-sysv* | vaxv)		# vaxen running system V
+			cpu_type=vax
+			xm_file=xm-vaxv.h
+			tm_file=tm-vaxv.h
+			;;
+		tahoe | tahoe-bsd*)		# tahoe running BSD
+			;;
+		tahoe/harris*)			# Harris tahoe, using COFF.
+			cpu_type=tahoe
+			;;
+		i386/sequent* | i386/sequent-bsd*)  # 80386 from Sequent
+			cpu_type=i386
+			xm_file=xm-i386.h
+			tm_file=tm-seq386.h
+			;;
+		i386-mach | i386/*-mach)
+			cpu_type=i386
+			xm_file=xm-i386.h
+			tm_file=tm-i386gas.h
+			;;
+		i386/sco | i386/sco-sysv* | i386/*-sco) # 80386 running SCO system
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			tm_file=tm-i386sco.h
+			make_var_file=make-i386sco
+			;;
+		i386/isc | i386/isc-sysv* | i386/*-isc)	# 80386 running ISC system
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			tm_file=tm-i386isc.h
+			make_var_file=make-i386isc
+			;;
+		i386/ibm | i386-aix | i386/ibm-aix)	# IBM PS/2 running AIX
+			cpu_type=i386
+			tm_file=tm-i386v.h
+			xm_file=xm-i386v.h
+			make_var_file=make-i386v
+			;;
+		i386/sun*)
+			cpu_type=i386
+			xm_file=xm-sun386i.h
+			tm_file=tm-sun386i.h
+			;;
+		i386-sysv4 | i386/*-sysv4 | i386v4)  # Intel 80386's running system V.4
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			make_var_file=make-i386v
+			tm_file=tm-i386v4.h
+			;;
+		i386-sysv* | i386/*-sysv* | i386v)  # Intel 80386's running system V
+			cpu_type=i386
+			xm_file=xm-i386v.h
+			make_var_file=make-i386v
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-i386gas.h
+			else
+				tm_file=tm-i386v.h
+			fi
+			;;
+		i860 | i860-sysv* | i860/*-sysv*)
+			cpu_type=i860
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-i860g.h
+			else
+				tm_file=tm-i860.h
+			fi
+			;;
+		i860-bsd* | i860/*-bsd*)
+			cpu_type=i860
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-i860bsdg.h
+			else
+				tm_file=tm-i860bsd.h
+			fi
+			;;
+		sparc | sparc/* | sparc-*os4 | sparc/*-*os4)
+			cpu_type=sparc
+			tm_file=tm-sparc.h
+			;;
+		sparc-*os3 | sparc/*-*os3)
+			cpu_type=sparc
+			tm_file=tm-sun4os3.h
+			;;
+		m68k/next)
+			cpu_type=m68k
+			tm_file=tm-next.h
+			out_file=out-next.c
+			xm_file=xm-next.h
+			;;
+		m68k/sun-*os3)
+			cpu_type=m68k
+			if [ x$nfp = xyes ]
+			then
+				tm_file=tm-sun3os3nf.h
+			else
+				tm_file=tm-sun3os3.h
+			fi
+			;;
+		m68k/sun-mach)
+			cpu_type=m68k
+			tm_file=tm-sun3mach.h
+			;;
+		m68k/sun | m68k/sun-*os4)
+			cpu_type=m68k
+			if [ x$nfp = xyes ]
+			then
+				tm_file=tm-sun3nfp.h
+			else
+				tm_file=tm-sun3.h
+			fi
+			;;
+		m68k/hp | m68k/hp-hpux*)	# HP 9000 series 300
+			cpu_type=m68k
+			xm_file=xm-hp9k320.h
+			if [ x$gas = xyes ]
+			then
+				make_var_file=make-hp9k320g
+				tm_file=tm-hp9k320g.h
+			else
+				make_var_file=make-hp9k320
+				tm_file=tm-hp9k320.h
+			fi
+			;;
+		m68k/hp-bsd*)			# HP 9000/3xx running Berkeley Unix
+			cpu_type=m68k
+			tm_file=tm-hp9k3bsd.h
+			;;
+		m68k/isi | m68k/isi-bsd*)
+			cpu_type=m68k
+			if [ x$nfp = xyes ]
+			then
+				tm_file=tm-isi68-nfp.h
+			else
+				tm_file=tm-isi68.h
+			fi
+			;;
+		m68k/sony | m68k/sony-bsd*)
+			xm_file=xm-m68k.h
+			cpu_type=m68k
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-newsgas.h
+			else
+				tm_file=tm-news.h
+			fi
+			;;
+		m68k/altos | m68k/altos-sysv*)		   # Altos 3068
+			cpu_type=m68k
+			if [ x$gas = xyes ]
+			then
+				xm_file=xm-altos3068.h
+				tm_file=tm-altos3068.h
+			else
+				echo "The Altos is supported only with the GNU assembler" 1>&2
+				exit 1
+			fi
+			;;
+		m68k/motorola | m68k/motorola-sysv*)
+			cpu_type=m68k
+			tm_file=tm-mot3300.h
+			xm_file=xm-mot3300.h
+			;;
+		m68k/crds | m68k/crds-unos | m68k-unos | crds | unos)
+			cpu_type=m68k
+			xm_file=xm-crds.h
+			make_var_file=make-crds
+			tm_file=tm-crds.h
+			;;
+		m68k/apollo)
+			cpu_type=m68k
+			make_var_file=make-apollo68
+			tm_file=tm-apollo68.h
+			;;
+		m68k/ncr | m68k/ncr-sysv*)	# NCR Tower 32 SVR3
+			cpu_type=m68k
+			tm_file=tm-tower-as.h
+			xm_file=xm-tower.h
+			;;
+		m68000/sun | m68000/sun-*os3)
+			cpu_type=m68k
+			tm_file=tm-sun2.h
+			;;
+		m68000/sun-*os4)
+			cpu_type=m68k
+			tm_file=tm-sun2os4.h
+			;;
+		m68000/hp | m68000/hp-hpux*)	# HP 9000 series 300
+			cpu_type=m68k
+			xm_file=xm-hp9k310.h
+			if [ x$gas = xyes ]
+			then
+				make_var_file=make-hp9k320g
+				tm_file=tm-hp9k310g.h
+			else
+				make_var_file=make-hp9k320
+				tm_file=tm-hp9k310.h
+			fi
+			;;
+		m68000/hp-bsd*)			# HP 9000/200 running BSD
+			cpu_type=m68k
+			tm_file=tm-hp9k2bsd.h
+			make_var_file=make-hp9k2bsd
+			;;
+		m68000/att | m68000/att-sysv*)
+			cpu_type=m68k
+			xm_file=xm-3b1.h
+			if [ x$gas = xyes ]
+			then
+				tm_file=tm-3b1g.h
+			else
+				tm_file=tm-3b1.h
+			fi
+			;;
+		m68000/convergent | m68000/convergent-sysv*)
+			cpu_type=m68k
+			xm_file=xm-3b1.h
+			tm_file=tm-ctix.h
+			;;
+		ns32k/sequent | ns32k/sequent-bsd*)
+			cpu_type=ns32k
+			tm_file=tm-sequent.h
+			;;
+		ns32k/encore | ns32k/encore-bsd* | encore | encore-bsd*)
+			cpu_type=ns32k
+			tm_file=tm-encore.h
+			;;
+		ns32k-genix* | ns32k/*-genix* | genix)
+			cpu_type=ns32k
+			xm_file=xm-genix.h
+			make_var_file=make-genix
+			tm_file=tm-genix.h
+			;;
+		merlin)
+			cpu_type=ns32k
+			;;
+		m88k/dg | m88k/dg-dgux* | m88k-dgux*)
+			cpu_type=m88k
+			xm_file=xm-m88kdgux.h
+			make_var_file=make-m88kdgux
+			tm_file=tm-m88kdgux.h
+			;;
+		m88k-v88r32 | m88k/*-v88r32)
+			cpu_type=m88k
+			tm_file=tm-v88r32.h
+			xm_file=xm-v88r32.h
+			;;
+		m88k-sysv* | m88k/*-sysv*)
+			cpu_type=m88k
+			tm_file=tm-m88ksvr4.h
+			xm_file=xm-m88ksvr4.h
+			;;
+		alliant | alliant/alliant)	# Alliant FX/8
+			cpu_type=alliant
+			tm_file=tm-alliant.h
+			;;
+		c1/convex)			# Convex C1
+			if [ -r /usr/include/stdlib.h ]
+			then
+				tm_file=tm-convex1.h
+			else
+				tm_file=tm-conv1os7.h
+			fi
+			cpu_type=convex
+			;;
+		c2/convex)			# Convex C2
+			if [ -r /usr/include/stdlib.h ]
+			then
+				tm_file=tm-convex2.h
+			else
+				tm_file=tm-conv2os7.h
+			fi
+			cpu_type=convex
+			;;
+		mips/sgi | mips/sgi-sysv*)	# Mostly like a MIPS.
+			cpu_type=mips
+			tm_file=tm-iris.h
+			xm_file=xm-iris.h
+			;;
+		mips | mips/mips)		# Default MIPS environment.
+			;;
+		mips/dec | mips/dec-bsd*)	# Decstation.
+			cpu_type=mips
+			tm_file=tm-decstatn.h
+			;;
+		mips/sony | mips/sony-bsd*)	# Sony NEWS 3600 or risc/news.
+			cpu_type=mips
+			tm_file=tm-mips-news.h
+			;;
+		mips/*-sysv* | mips-sysv*)	# SYSV variant of MIPS system.
+			cpu_type=mips
+			tm_file=tm-mips-sysv.h
+			;;
+		mips/*-bsd* | mips-bsd*)	# BSD 4.3 variant of MIPS system.
+			cpu_type=mips
+			tm_file=tm-mips-bsd.h
+			;;
+		pyramid | pyramid/* | pyramid-*)
+			cpu_type=pyr
+			tm_file=tm-pyr.h
+			;;
+		tron | tron/*)
+			cpu_type=gmicro
+			tm_file=tm_gmicro.h
+			;;
+		a29k-bsd* | a29k/*-bsd*)
+			cpu_type=a29k
+			tm_file=tm-a29kunix.h
+			;;
+		i960)				# Default i960 environment.
+			;;
+	#	370)
+	#		;;
+		esac
+		if [ x$pass1done = x ]
+		then
+			if [ x$cpu_type = x ]; then cpu_type=$host; fi
+			if [ x$xm_file = x ]; then host_xm_file=xm-$cpu_type.h
+			else host_xm_file=$xm_file
+			fi
+			if [ x$make_var_file = x ]
+			then make_var_file=make-$cpu_type; fi
+			host_make_var_file=$make_var_file
+			pass1done=yes
+		fi
+	done
+
+	# Default the machine-specific variables that were not explicitly set.
+	if [ x$cpu_type = x ]
+	then cpu_type=$target; fi
+
+	if [ x$tm_file = x ]
+	then tm_file=tm-$target.h; fi
+
+	md_file=${cpu_type}.md
+
+	if [ x$out_file = x ]
+	then out_file=out-$cpu_type.c; fi
+fi
+
+#### configure.in files go here.
+### end of configure.in
+
+# are we rebuilding config itself?
+if [ -n "$template" ]
+then
+	if [ ! -r $template ]
+	then
+		echo "Can't find template ${template}."
+		exit 1
+	fi
+
+	mv configure configure.old
+	echo "#!/bin/sh" > configure
+	echo "# Do not edit this file.  It is generated automatically from configure.in" >> configure
+	echo "# and a configure template." >> configure
+	echo "configdirs=" >> configure
+	echo >> configure
+
+	if [ -r configure.in ]
+	then
+		sed -e "/^####/  r configure.in" $template >> configure
+	else
+		cat $template >> configure
+	fi
+
+	chmod a+x configure
+	rm configure.old
+#	echo Rebuilt configure in `pwd` from ${template}.
+	echo Rebuilt configure in `pwd`
+
+	if [ x$norecurse = x ]
+	then
+		while [ -n "$configdirs" ]
+		do
+			# set configdir to car of configdirs, configdirs to cdr of configdirs
+			set $configdirs; configdir=$1; shift; configdirs=$*
+
+			if [ "`echo ${configdir}.*`" != "${configdir}.*" ]
+			then
+				targetspecificdirs=${configdir}.*
+			else
+				targetspecificdirs=
+			fi
+
+			for i in ${configdir} ${targetspecificdirs}
+			do
+				if [ -r $i/configure ]
+				then
+					(cd $i ;
+						configure +template=${template})
+				else
+					echo No configure script in `pwd`/$i
+				fi
+			done
+		done
+	fi
+
+	exit 0
+fi
+
+# Temporarily, we support only direct subdir builds.
+hostsubdir=Host-$host
+targetsubdir=Target-$target
+
+if [ -n "$removing" ]
+then
+	rm -rf $hostsubdir/$targetsubdir
+
+	if [ -z "`(ls $hostsubdir) 2>&1 | grep Target-`" ]
+	then
+		rm -rf $hostsubdir
+	fi
+else
+	if [ ! -d $hostsubdir ] ; then mkdir $hostsubdir ; fi
+	cd $hostsubdir
+
+	if [ ! -d $targetsubdir ] ; then mkdir $targetsubdir ; fi
+	cd $targetsubdir
+
+	srcdir=../..
+
+	## Find the source files, if location was not specified.
+	#if [ x$srcdir = x ]
+	#then
+	#	srcdirdefaulted=1
+	#	srcdir=.
+	#	if [ ! -r ${srctrigger} ]
+	#	then
+	#		srcdir=..
+	#	fi
+	#fi
+	#
+	#if [ ! -r ${srcdir}/${srctrigger} ]
+	#then
+	#	if [ x$srcdirdefaulted = x ]
+	#	then
+	#	  echo "$progname: Can't find ${srcname} sources in \`${srcdir}'." 1>&2
+	#	else
+	#	  echo "$progname: Can't find ${srcname} sources in \`.' or \`..'." 1>&2
+	#	fi
+	#	exit 1
+	#fi
+
+
+
+	# Set up the list of links to be made.
+	# $links is the list of link names, and $files is the list of names to link to.
+
+	# Make the links.
+	while [ -n "$files" ]
+	do
+		# set file to car of files, files to cdr of files
+		set $files; file=$1; shift; files=$*
+		set $links; link=$1; shift; links=$*
+
+		if [ ! -r ${srcdir}/config/$file ]
+		then
+			echo "$progname: cannot create a link \`$link'," 1>&2
+			echo "since the file \`config/$file' does not exist." 1>&2
+			exit 1
+		fi
+
+		$remove -f $link
+		rm -f config.status
+		# Make a symlink if possible, otherwise try a hard link
+		$symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link
+
+		if [ ! -r $link ]
+		then
+			echo "$progname: unable to link \`$link' to \`${srcdir}/config/$file'." 1>&2
+			exit 1
+		fi
+		echo "Linked \`$link' to \`${srcdir}/config/$file'."
+	done
+
+	# Install a makefile, and make it set VPATH
+	# if necessary so that the sources are found.
+	# Also change its value of srcdir.
+	# Also create a .gdbinit file which runs the one in srcdir
+	# and tells GDB to look there for source files.
+	case $srcdir in
+	.)
+		;;
+	*)
+		echo "VPATH = ${srcdir}" > x
+		cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
+		rm x
+		echo "dir ." > .gdbinit
+		echo "dir ${srcdir}" >> .gdbinit
+		echo "source ${srcdir}/.gdbinit" >> .gdbinit
+		;;
+	esac
+
+	host_var_file=hmake-${host}
+	target_var_file=tmake-${target}
+
+	# Conditionalize the makefile for this machine.
+	if [ -f ${srcdir}/config/${host_var_file} ]
+	then
+		sed -e "/^####/  r ${srcdir}/config/${host_var_file}" Makefile.in > Makefile.tem
+	else
+		cp Makefile.in Makefile.tem
+	fi
+
+	if [ -f ${srcdir}/config/${target_var_file} ]
+	then
+		sed -e "/^####/  r ${srcdir}/config/${target_var_file}" Makefile.tem > Makefile.tem1
+		mv Makefile.tem1 Makefile.tem
+	fi
+
+	# Remove all formfeeds, since some Makes get confused by them.
+	sed "s///" Makefile.tem >> Makefile.tem1
+	mv Makefile.tem1 Makefile.tem
+
+	# reset SUBDIRS
+	sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile.tem > Makefile.tem1
+	mv Makefile.tem1 Makefile.tem
+
+	# reset NONSUBDIRS
+	sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile.tem > Makefile.tem1
+	mv Makefile.tem1 Makefile.tem
+
+	# Delete the intermediate files
+	if [ x$srcdir != x. ] ; then rm Makefile.in ; fi
+
+	rm -f Makefile
+
+	# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
+	if [ x$host != x$target ]
+	then
+		echo "CROSS=-DCROSS_COMPILE" > Makefile
+		echo "ALL=start.encap" >> Makefile
+	else
+		echo "ALL=all.internal" > Makefile
+	fi
+
+	# set target and host
+	echo "host = $host" >> Makefile
+	echo "target = $target" >> Makefile
+
+	cat Makefile.tem >> Makefile
+	rm Makefile.tem
+
+	using=
+	if [ -f ${srcdir}/config/${host_var_file} ]
+	then
+		using=" using \"${host_var_file}\""
+	fi
+
+	if [ -f ${srcdir}/config/${target_var_file} ]
+	then
+		if [ -z "${using}" ]
+		then
+			andusing=" using \"${target_var_file}\""
+		else
+			andusing="${using} and \"${target_var_file}\""
+		fi
+	else
+		andusing=${using}
+	fi
+
+	echo "Created \"Makefile\""${andusing}.
+
+	if [ x$host = x$target ]
+	then
+		echo "Links are now set up for use with a $target." \
+			| tee ${srcdir}/config.status
+	else
+		echo "Links are now set up for host $host and target $target." \
+			| tee ${srcdir}/config.status
+	fi
+
+	cd ${srcdir}
+fi
+
+# If there are subdirectories, then recurse. 
+
+if [ x$norecurse != x ] ; then exit 0 ; fi
+
+while [ -n "$configdirs" ]
+do
+	# set configdir to car of configdirs, configdirs to cdr of configdirs
+	set $configdirs; configdir=$1; shift; configdirs=$*
+
+	# check for target override
+	targetspecificdir=${configdir}.${target}
+	if [ -d ${targetspecificdir} ]
+	then
+		configdir=${targetspecificdir}
+	fi
+
+	echo Configuring ${configdir}...
+	(cd ${configdir} ;
+		configure +host=${host} ${target} ${removing}) \
+		| sed 's/^/	/'
+done
+
+exit 0