From: Vivien Didelot Date: Wed, 18 Jun 2014 14:12:10 +0000 (-0400) Subject: manual: (faq-boot-hang-after-starting) fix config entries X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=9ab109869fe1758e47c75edd16b20af1db05e1fc;p=buildroot.git manual: (faq-boot-hang-after-starting) fix config entries Signed-off-by: Vivien Didelot Signed-off-by: Thomas Petazzoni --- diff --git a/docs/manual/faq-troubleshooting.txt b/docs/manual/faq-troubleshooting.txt index 2fdb53079d..26c84604ec 100644 --- a/docs/manual/faq-troubleshooting.txt +++ b/docs/manual/faq-troubleshooting.txt @@ -19,11 +19,11 @@ Starting dropbear sshd: generating rsa key... generating dsa key... OK then it means that your system is running, but didn't start a shell on the serial console. In order to have the system start a shell on your -serial console, you have to go into the Buildroot configuration, +System -configuration+, and modify +Port to run a getty (login prompt) on+ and -+Baudrate to use+ as appropriate. This will automatically tune the -+/etc/inittab+ file of the generated system so that a shell starts on -the correct serial port. +serial console, you have to go into the Buildroot configuration, in ++System configuration+, modify +Run a getty (login prompt) after boot+ +and set the appropriate port and baud rate in the +getty options+ +submenu. This will automatically tune the +/etc/inittab+ file of the +generated system so that a shell starts on the correct serial port. [[faq-no-compiler-on-target]] == Why is there no compiler on the target?