From: Peter Korsgaard Date: Mon, 23 May 2016 13:33:49 +0000 (+0200) Subject: boards: add roseapple pi board support X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=9cacb5be8449f9033ade3b3336b81cac20ae94db;p=buildroot.git boards: add roseapple pi board support Add basic support for the roseapple pi board, a SBC in a RPI form factor with an Actions Semiconductor S500 SoC. For details, see: http://roseapplepi.org/ The vendor kernel unfortunately needs a minor patch to build the XHCI driver, so include it here. Signed-off-by: Peter Korsgaard --- diff --git a/board/roseapplepi/genimage.cfg b/board/roseapplepi/genimage.cfg new file mode 100644 index 0000000000..4d40e65bba --- /dev/null +++ b/board/roseapplepi/genimage.cfg @@ -0,0 +1,43 @@ +# Minimal SD card image for the Roseapple Pi +# +image boot.vfat { + vfat { + files = { + "uEnv.txt", + "uImage" + } + file kernel.dtb { + image = "actduino_bubble_gum_sdboot_linux.dtb" + } + } + size = 10M +} + +image sdcard.img { + hdimage { + } + + partition s500-bootloader { + in-partition-table = "no" + image = "s500-bootloader.bin" + offset = 0x200200 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 0x300000 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/roseapplepi/patches/linux/0001-unbreak-xhci-trace.patch b/board/roseapplepi/patches/linux/0001-unbreak-xhci-trace.patch new file mode 100644 index 0000000000..79e8c800d2 --- /dev/null +++ b/board/roseapplepi/patches/linux/0001-unbreak-xhci-trace.patch @@ -0,0 +1,31 @@ +[PATCH] unbreak xhci-trace compilation + +When commit 84a99f6fc5d4 (xhci: add traces for debug messages in +xhci_address_device) was backported to the owl tree as part of commit +5b2ea66f15396 (usb: add owl usb driver), the specific CFLAGS needed for +xhci-trace.c were missed, causing build breakage: + + CC drivers/usb/host/xhci-trace.o +In file included from drivers/usb/host/xhci-trace.h:151:0, + from drivers/usb/host/xhci-trace.c:15: +include/trace/define_trace.h:79:43: fatal error: ./xhci-trace.h: No such file or directory + +Signed-off-by: Peter Korsgaard +--- + drivers/usb/host/Makefile | 3 +++ + 1 file changed, 3 insertions(+) + +Index: linux-59dbf6a4998e967eb9c6bdcc9b506c0d96acb26b/drivers/usb/host/Makefile +=================================================================== +--- linux-59dbf6a4998e967eb9c6bdcc9b506c0d96acb26b.orig/drivers/usb/host/Makefile ++++ linux-59dbf6a4998e967eb9c6bdcc9b506c0d96acb26b/drivers/usb/host/Makefile +@@ -4,6 +4,9 @@ + + ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG + ++# tell define_trace.h where to find the xhci trace header ++CFLAGS_xhci-trace.o := -I$(src) ++ + isp1760-y := isp1760-hcd.o isp1760-if.o + + fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o diff --git a/board/roseapplepi/post-image.sh b/board/roseapplepi/post-image.sh new file mode 100755 index 0000000000..e8f2df23f3 --- /dev/null +++ b/board/roseapplepi/post-image.sh @@ -0,0 +1,18 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +cp "${BOARD_DIR}/uEnv.txt" "${BINARIES_DIR}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" + +exit $? diff --git a/board/roseapplepi/uEnv.txt b/board/roseapplepi/uEnv.txt new file mode 100755 index 0000000000..f9646e498e --- /dev/null +++ b/board/roseapplepi/uEnv.txt @@ -0,0 +1,3 @@ +# no ramdisk +ramdisk_addr_r=- +bootargs=clk_ignore_unused root=/dev/mmcblk0p2 diff --git a/configs/roseapplepi_defconfig b/configs/roseapplepi_defconfig new file mode 100644 index 0000000000..6627ff4711 --- /dev/null +++ b/configs/roseapplepi_defconfig @@ -0,0 +1,40 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y + +BR2_GLOBAL_PATCH_DIR="board/roseapplepi/patches" +# Linux headers same as kernel, a 3.10 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/roseapplepi/post-image.sh" + +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/xapp-le/kernel.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="59dbf6a4998e967eb9c6bdcc9b506c0d96acb26b" +BR2_LINUX_KERNEL_DEFCONFIG="actduino_bubble_gum_linux" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="actduino_bubble_gum_sdboot_linux" + +# Filesystem / image +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set + +# Bootloaders +BR2_TARGET_S500_BOOTLOADER=y +BR2_TARGET_S500_BOOTLOADER_BOARD="linux/bubble_gum_sd" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/xapp-le/u-boot.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="a035d2673a90143a1a74557503b2e137b1447ae6" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="actduino_bubble_gum_v10" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y + +# Required tools to create the SD image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y