From: Matt Weber Date: Mon, 5 Mar 2018 02:47:00 +0000 (-0600) Subject: freescale_p1010rdb_pa_defconfig: remove board X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=9f13f8c2374e8240c1b85c702257341df80bd797;p=buildroot.git freescale_p1010rdb_pa_defconfig: remove board This defconfig currently doesn't build with GCC6 (Linux 4.1). https://gitlab.com/buildroot.org/buildroot/-/jobs/55306827 A maintainer w/board isn't available to make updates, so removing this config. Signed-off-by: Matthew Weber Signed-off-by: Peter Korsgaard --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 5edb19f75d..2a1d463876 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -121,7 +121,6 @@ freescale_imx6sololiteevk_defconfig: *defconfig freescale_imx6sxsabresd_defconfig: *defconfig freescale_imx6ulevk_defconfig: *defconfig freescale_imx7dsabresd_defconfig: *defconfig -freescale_p1010rdb_pa_defconfig: *defconfig friendlyarm_nanopi_a64_defconfig: *defconfig friendlyarm_nanopi_neo2_defconfig: *defconfig galileo_defconfig: *defconfig diff --git a/board/freescale/p1010rdb/linux-4.1.config b/board/freescale/p1010rdb/linux-4.1.config deleted file mode 100644 index 2de430cbee..0000000000 --- a/board/freescale/p1010rdb/linux-4.1.config +++ /dev/null @@ -1,70 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_PHYS_64BIT=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_P1010_RDB=y -CONFIG_HIGHMEM=y -CONFIG_SWIOTLB=y -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_RAPIDIO=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_ATA=y -CONFIG_SATA_FSL=y -CONFIG_NETDEVICES=y -CONFIG_GIANFAR=y -CONFIG_VITESSE_PHY=y -CONFIG_FIXED_PHY=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_SPI=y -CONFIG_SPI_FSL_SPI=y -CONFIG_SPI_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_OF_ESDHC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_DMADEVICES=y -CONFIG_FSL_DMA=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_SQUASHFS=y -CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt deleted file mode 100644 index 025c97e8a8..0000000000 --- a/board/freescale/p1010rdb/readme.txt +++ /dev/null @@ -1,40 +0,0 @@ -You'll need to program the files created by buildroot into the flash. -The fast way is to tftp transfer the files via one of the network interfaces. - -Alternatively you can transfer the files via serial console with an Ymodem -file transfer from your terminal program by using a "loady" command -from the u-boot prompt instead of the "tftp ..." commands stated below. -Beware that serial console file transfers are quite slow! - -1. Program the DTB to NOR flash - - => tftp $loadaddr p1010rdb-pa.dtb - => erase 0xee000000 +$filesize - => cp.b $loadaddr 0xee000000 $filesize - -2. Program the kernel to NOR flash - - => tftp $loadaddr uImage - => erase 0xee080000 +$filesize - => cp.b $loadaddr 0xee080000 $filesize - -3. Program the root filesystem to NOR flash - - => tftp $loadaddr rootfs.jffs2 - => erase 0xee800000 0xeff5ffff - => cp.b $loadaddr 0xee800000 $filesize - -4. Booting your new system - - => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000' - - If you want to set this boot option as default: - - => setenv bootcmd 'run norboot' - => saveenv - - ...or for a single boot: - - => run norboot - - You can login with user "root". diff --git a/configs/freescale_p1010rdb_pa_defconfig b/configs/freescale_p1010rdb_pa_defconfig deleted file mode 100644 index 3497275c8a..0000000000 --- a/configs/freescale_p1010rdb_pa_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -# Architecture -BR2_powerpc=y -BR2_powerpc_8548=y - -# Filesystem -# BR2_TARGET_ROOTFS_TAR is not set -BR2_TARGET_ROOTFS_JFFS2=y -BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y -BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x20 -BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x20000 - -# Linux headers same as kernel, a 4.1 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y - -# Kernel -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.4" -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-4.1.config" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="p1010rdb-pa" - -# Serial port config -BR2_TARGET_GENERIC_GETTY=y -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"