From: Sandra Loosemore Date: Tue, 7 May 2013 01:09:29 +0000 (+0000) Subject: 2013-05-06 Sandra Loosemore X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a1217d97c4b0449d052fad3d2df2ab58b48f918c;p=binutils-gdb.git 2013-05-06 Sandra Loosemore Andrew Jenner Chung-Lin Tang Julian Brown Based on the nios2-elf port from Altera Corporation. gdb/ * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and nios2-linux-tdep.o. (HFILES_NO_SRCDIR): Add nios2-tdep.h. (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c. * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets. * nios2-tdep.h: New. * nios2-tdep.c: New. * nios2-linux-tdep.c: New. * features/Makefile (WHICH): Add nios2-linux. (nios2-linux-expedite): Set. * features/nios2-cpu.xml: New. * features/nios2.xml: New. * features/nios2-linux.xml: New. * features/nios2.c: New (autogenerated). * features/nios2-linux.c: New (autogenerated). * regformats/nios2-linux.dat: New (autogenerated). * NEWS (Changes since GDB 7.6): Add new Nios II targets and commands. gdb/doc/ * gdb.texinfo (Nios II): New section. (Nios II Features): New section. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 9578da0d389..af14702e59d 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,29 @@ +2013-05-06 Sandra Loosemore + Andrew Jenner + Chung-Lin Tang + Julian Brown + + Based on the nios2-elf port from Altera Corporation. + + * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and + nios2-linux-tdep.o. + (HFILES_NO_SRCDIR): Add nios2-tdep.h. + (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c. + * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets. + * nios2-tdep.h: New. + * nios2-tdep.c: New. + * nios2-linux-tdep.c: New. + * features/Makefile (WHICH): Add nios2-linux. + (nios2-linux-expedite): Set. + * features/nios2-cpu.xml: New. + * features/nios2.xml: New. + * features/nios2-linux.xml: New. + * features/nios2.c: New (autogenerated). + * features/nios2-linux.c: New (autogenerated). + * regformats/nios2-linux.dat: New (autogenerated). + * NEWS (Changes since GDB 7.6): Add new Nios II targets + and commands. + 2013-05-06 Doug Evans * symfile.c: Whitespace cleanup. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 625ca4a7280..2597ddb8773 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -571,6 +571,7 @@ ALL_TARGET_OBS = \ mn10300-linux-tdep.o mn10300-tdep.o \ moxie-tdep.o \ mt-tdep.o \ + nios2-tdep.o nios2-linux-tdep.o \ nto-tdep.o \ ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \ ppc64-tdep.o rl78-tdep.o \ @@ -834,7 +835,7 @@ psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \ amd64-darwin-tdep.h charset-list.h \ config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \ dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \ -i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h \ +i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \ osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \ python/python-internal.h python/python.h ravenscar-thread.h record.h \ record-full.h solib-aix.h \ @@ -1516,6 +1517,7 @@ ALLDEPFILES = \ mips-tdep.c \ mipsnbsd-nat.c mipsnbsd-tdep.c \ mips64obsd-nat.c mips64obsd-tdep.c \ + nios2-tdep.c nios2-linux-tdep.c \ nbsd-nat.c nbsd-tdep.c obsd-tdep.c \ solib-osf.c \ somread.c solib-som.c \ diff --git a/gdb/NEWS b/gdb/NEWS index 76b48e82e85..65284dc32d4 100644 --- a/gdb/NEWS +++ b/gdb/NEWS @@ -3,6 +3,11 @@ *** Changes since GDB 7.6 +* New targets + +Nios II ELF nios2*-*-elf +Nios II GNU/Linux nios2*-*-linux + * New commands: catch rethrow Like "catch throw", but catches a re-thrown exception. @@ -22,6 +27,10 @@ set remote trace-status-packet show remote trace-status-packet Set/show the use of remote protocol qTStatus packet. +set debug nios2 +show debug nios2 + Control display of debugging messages related to Nios II targets. + * You can now use a literal value 'unlimited' for options that interpret 0 or -1 as meaning "unlimited". E.g., "set trace-buffer-size unlimited" is now an alias for "set diff --git a/gdb/configure.tgt b/gdb/configure.tgt index 4acad872281..b0bee4757c2 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -396,6 +396,17 @@ mt-*-*) gdb_target_obs="mt-tdep.o" ;; +nios2*-*-linux*) + # Target: Altera Nios II running Linux + gdb_target_obs="nios2-tdep.o nios2-linux-tdep.o solib-svr4.o \ + symfile-mem.o glibc-tdep.o linux-tdep.o" + ;; + +nios2*-*-*) + # Target: Altera Nios II bare-metal + gdb_target_obs="nios2-tdep.o" + ;; + powerpc*-*-freebsd*) # Target: FreeBSD/powerpc gdb_target_obs="rs6000-tdep.o ppc-sysv-tdep.o ppc64-tdep.o \ diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 8035f3eaa3c..324dd9d8d3f 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,8 @@ +2013-05-06 Sandra Loosemore + + * gdb.texinfo (Nios II): New section. + (Nios II Features): New section. + 2013-05-06 Joel Brobecker * gdbint.texinfo (Algorithms): Remove entries documenting diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 8bc12130b1a..39730c295e1 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -20832,6 +20832,7 @@ all uses of @value{GDBN} with the architecture, both native and cross. * HPPA:: HP PA architecture * SPU:: Cell Broadband Engine SPU architecture * PowerPC:: +* Nios II:: @end menu @node AArch64 @@ -21115,6 +21116,24 @@ by joining the even/odd register pairs @code{f0} and @code{f1} for @code{$dl0}, For POWER7 processors, @value{GDBN} provides a set of pseudo-registers, the 64-bit wide Extended Floating Point Registers (@samp{f32} through @samp{f63}). +@node Nios II +@subsection Nios II +@cindex Nios II architecture + +When @value{GDBN} is debugging the Nios II architecture, +it provides the following special commands: + +@table @code + +@item set debug nios2 +@kindex set debug nios2 +This command turns on and off debugging messages for the Nios II +target code in @value{GDBN}. + +@item show debug nios2 +@kindex show debug nios2 +Show the current setting of Nios II debugging messages. +@end table @node Controlling GDB @chapter Controlling @value{GDBN} @@ -41225,6 +41244,7 @@ registers using the capitalization used in the description. * i386 Features:: * MIPS Features:: * M68K Features:: +* Nios II Features:: * PowerPC Features:: * TIC6x Features:: @end menu @@ -41374,6 +41394,16 @@ This feature is optional. If present, it should contain registers @samp{fpiaddr}. @end table +@node Nios II Features +@subsection Nios II Features +@cindex target descriptions, Nios II features + +The @samp{org.gnu.gdb.nios2.cpu} feature is required for Nios II +targets. It should contain the 32 core registers (@samp{zero}, +@samp{at}, @samp{r2} through @samp{r23}, @samp{et} through @samp{ra}), +@samp{pc}, and the 16 control registers (@samp{status} through +@samp{mpuacc}). + @node PowerPC Features @subsection PowerPC Features @cindex target descriptions, PowerPC features diff --git a/gdb/features/Makefile b/gdb/features/Makefile index 4ba5cc3313d..e3a07e7130b 100644 --- a/gdb/features/Makefile +++ b/gdb/features/Makefile @@ -42,6 +42,7 @@ WHICH = aarch64 aarch64-without-fpu \ i386/x32-avx i386/x32-avx-linux \ mips-linux mips-dsp-linux \ mips64-linux mips64-dsp-linux \ + nios2-linux \ rs6000/powerpc-32 \ rs6000/powerpc-32l rs6000/powerpc-altivec32l rs6000/powerpc-e500l \ rs6000/powerpc-64l rs6000/powerpc-altivec64l rs6000/powerpc-vsx32l \ @@ -73,6 +74,7 @@ mips-expedite = r29,pc mips-dsp-expedite = r29,pc mips64-expedite = r29,pc mips64-dsp-expedite = r29,pc +nios2-linux-expedite = sp,pc powerpc-expedite = r1,pc rs6000/powerpc-cell32l-expedite = r1,pc,r0,orig_r3,r4 rs6000/powerpc-cell64l-expedite = r1,pc,r0,orig_r3,r4 diff --git a/gdb/features/nios2-cpu.xml b/gdb/features/nios2-cpu.xml new file mode 100644 index 00000000000..a4146a655bb --- /dev/null +++ b/gdb/features/nios2-cpu.xml @@ -0,0 +1,59 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/gdb/features/nios2-linux.c b/gdb/features/nios2-linux.c new file mode 100644 index 00000000000..d384d7f01c5 --- /dev/null +++ b/gdb/features/nios2-linux.c @@ -0,0 +1,71 @@ +/* THIS FILE IS GENERATED. -*- buffer-read-only: t -*- vi:set ro: + Original: nios2-linux.xml */ + +#include "defs.h" +#include "osabi.h" +#include "target-descriptions.h" + +struct target_desc *tdesc_nios2_linux; +static void +initialize_tdesc_nios2_linux (void) +{ + struct target_desc *result = allocate_target_description (); + struct tdesc_feature *feature; + + set_tdesc_architecture (result, bfd_scan_arch ("nios2")); + + set_tdesc_osabi (result, osabi_from_tdesc_string ("GNU/Linux")); + + feature = tdesc_create_feature (result, "org.gnu.gdb.nios2.cpu"); + tdesc_create_reg (feature, "zero", 0, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "at", 1, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r2", 2, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r3", 3, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r4", 4, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r5", 5, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r6", 6, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r7", 7, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r8", 8, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r9", 9, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r10", 10, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r11", 11, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r12", 12, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r13", 13, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r14", 14, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r15", 15, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r16", 16, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r17", 17, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r18", 18, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r19", 19, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r20", 20, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r21", 21, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r22", 22, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r23", 23, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "et", 24, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "bt", 25, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "gp", 26, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "sp", 27, 1, NULL, 32, "data_ptr"); + tdesc_create_reg (feature, "fp", 28, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ea", 29, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ba", 30, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ra", 31, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "pc", 32, 1, NULL, 32, "code_ptr"); + tdesc_create_reg (feature, "status", 33, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "estatus", 34, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "bstatus", 35, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ienable", 36, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ipending", 37, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "cpuid", 38, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ctl6", 39, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "exception", 40, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "pteaddr", 41, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "tlbacc", 42, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "tlbmisc", 43, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "eccinj", 44, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "badaddr", 45, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "config", 46, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "mpubase", 47, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "mpuacc", 48, 1, NULL, 32, "uint32"); + + tdesc_nios2_linux = result; +} diff --git a/gdb/features/nios2-linux.xml b/gdb/features/nios2-linux.xml new file mode 100644 index 00000000000..f262df293a9 --- /dev/null +++ b/gdb/features/nios2-linux.xml @@ -0,0 +1,13 @@ + + + + + + nios2 + GNU/Linux + + diff --git a/gdb/features/nios2.c b/gdb/features/nios2.c new file mode 100644 index 00000000000..cb7246d8805 --- /dev/null +++ b/gdb/features/nios2.c @@ -0,0 +1,69 @@ +/* THIS FILE IS GENERATED. -*- buffer-read-only: t -*- vi:set ro: + Original: nios2.xml */ + +#include "defs.h" +#include "osabi.h" +#include "target-descriptions.h" + +struct target_desc *tdesc_nios2; +static void +initialize_tdesc_nios2 (void) +{ + struct target_desc *result = allocate_target_description (); + struct tdesc_feature *feature; + + set_tdesc_architecture (result, bfd_scan_arch ("nios2")); + + feature = tdesc_create_feature (result, "org.gnu.gdb.nios2.cpu"); + tdesc_create_reg (feature, "zero", 0, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "at", 1, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r2", 2, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r3", 3, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r4", 4, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r5", 5, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r6", 6, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r7", 7, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r8", 8, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r9", 9, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r10", 10, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r11", 11, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r12", 12, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r13", 13, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r14", 14, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r15", 15, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r16", 16, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r17", 17, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r18", 18, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r19", 19, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r20", 20, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r21", 21, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r22", 22, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "r23", 23, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "et", 24, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "bt", 25, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "gp", 26, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "sp", 27, 1, NULL, 32, "data_ptr"); + tdesc_create_reg (feature, "fp", 28, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ea", 29, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ba", 30, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ra", 31, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "pc", 32, 1, NULL, 32, "code_ptr"); + tdesc_create_reg (feature, "status", 33, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "estatus", 34, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "bstatus", 35, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ienable", 36, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ipending", 37, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "cpuid", 38, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "ctl6", 39, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "exception", 40, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "pteaddr", 41, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "tlbacc", 42, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "tlbmisc", 43, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "eccinj", 44, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "badaddr", 45, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "config", 46, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "mpubase", 47, 1, NULL, 32, "uint32"); + tdesc_create_reg (feature, "mpuacc", 48, 1, NULL, 32, "uint32"); + + tdesc_nios2 = result; +} diff --git a/gdb/features/nios2.xml b/gdb/features/nios2.xml new file mode 100644 index 00000000000..25849bb58f7 --- /dev/null +++ b/gdb/features/nios2.xml @@ -0,0 +1,12 @@ + + + + + + nios2 + + diff --git a/gdb/nios2-linux-tdep.c b/gdb/nios2-linux-tdep.c new file mode 100644 index 00000000000..67f400701b3 --- /dev/null +++ b/gdb/nios2-linux-tdep.c @@ -0,0 +1,233 @@ +/* Target-dependent code for GNU/Linux on Nios II. + Copyright (C) 2012-2013 Free Software Foundation, Inc. + Contributed by Mentor Graphics, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include "defs.h" +#include "frame.h" +#include "gdb_assert.h" +#include "gdb_string.h" +#include "osabi.h" +#include "solib-svr4.h" +#include "trad-frame.h" +#include "tramp-frame.h" +#include "symtab.h" +#include "regset.h" +#include "regcache.h" +#include "linux-tdep.h" +#include "glibc-tdep.h" +#include "nios2-tdep.h" + +#include "features/nios2-linux.c" + +/* Core file and register set support. */ + +/* Map from the normal register enumeration order to the order that + registers appear in core files, which corresponds to the order + of the register slots in the kernel's struct pt_regs. */ + +static const int reg_offsets[NIOS2_NUM_REGS] = +{ + -1, 8, 9, 10, 11, 12, 13, 14, /* r0 - r7 */ + 0, 1, 2, 3, 4, 5, 6, 7, /* r8 - r15 */ + 23, 24, 25, 26, 27, 28, 29, 30, /* r16 - r23 */ + -1, -1, 19, 18, 17, 21, -1, 16, /* et bt gp sp fp ea ba ra */ + 21, /* pc */ + -1, 20, -1, -1, -1, -1, -1, -1, /* status estatus ... */ + -1, -1, -1, -1, -1, -1, -1, -1 +}; + +/* Implement the supply_regset hook for core files. */ + +static void +nios2_supply_gregset (const struct regset *regset, + struct regcache *regcache, + int regnum, const void *gregs_buf, size_t len) +{ + const gdb_byte *gregs = gregs_buf; + int regno; + static const gdb_byte zero_buf[4] = {0, 0, 0, 0}; + + for (regno = NIOS2_Z_REGNUM; regno <= NIOS2_MPUACC_REGNUM; regno++) + if (regnum == -1 || regnum == regno) + { + if (reg_offsets[regno] != -1) + regcache_raw_supply (regcache, regno, + gregs + 4 * reg_offsets[regno]); + else + regcache_raw_supply (regcache, regno, zero_buf); + } +} + +static struct regset nios2_core_regset = +{ + NULL, + nios2_supply_gregset, + NULL, + NULL +}; + +/* Implement the regset_from_core_section gdbarch method. */ + +static const struct regset * +nios2_regset_from_core_section (struct gdbarch *gdbarch, + const char *sect_name, size_t sect_size) +{ + if (strcmp (sect_name, ".reg") == 0) + return &nios2_core_regset; + + return NULL; +} + +/* Initialize a trad-frame cache corresponding to the tramp-frame. + FUNC is the address of the instruction TRAMP[0] in memory. */ + +static void +nios2_linux_sigreturn_init (const struct tramp_frame *self, + struct frame_info *next_frame, + struct trad_frame_cache *this_cache, + CORE_ADDR func) +{ + CORE_ADDR base = func + 16; + int i; + + for (i = 0; i < 8; i++) + trad_frame_set_reg_addr (this_cache, i + 8, base + i * 4); + for (i = 0; i < 7; i++) + trad_frame_set_reg_addr (this_cache, i + 1, base + (i + 8) * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_RA_REGNUM, base + 16 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_FP_REGNUM, base + 17 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_SP_REGNUM, base + 18 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_GP_REGNUM, base + 19 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_ESTATUS_REGNUM, base + 20 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_PC_REGNUM, base + 21 * 4); + + /* Save a frame ID. */ + trad_frame_set_id (this_cache, frame_id_build (base, func)); +} + +/* Initialize a trad-frame cache corresponding to the tramp-frame. + FUNC is the address of the instruction TRAMP[0] in memory. */ + +static void +nios2_linux_rt_sigreturn_init (const struct tramp_frame *self, + struct frame_info *next_frame, + struct trad_frame_cache *this_cache, + CORE_ADDR func) +{ + CORE_ADDR base = func + 41 * 4; + int i; + + for (i = 0; i < 23; i++) + trad_frame_set_reg_addr (this_cache, i + 1, base + i * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_RA_REGNUM, base + 23 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_FP_REGNUM, base + 24 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_GP_REGNUM, base + 25 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_PC_REGNUM, base + 27 * 4); + trad_frame_set_reg_addr (this_cache, NIOS2_SP_REGNUM, base + 28 * 4); + + /* Save a frame ID. */ + trad_frame_set_id (this_cache, frame_id_build (base, func)); +} + +static struct tramp_frame nios2_linux_sigreturn_tramp_frame = +{ + SIGTRAMP_FRAME, + 4, + { + { 0x00800004 | (119 << 6), -1 }, /* movi r2,__NR_sigreturn */ + { 0x003b683a, -1 }, /* trap */ + { TRAMP_SENTINEL_INSN } + }, + nios2_linux_sigreturn_init +}; + +static struct tramp_frame nios2_linux_rt_sigreturn_tramp_frame = +{ + SIGTRAMP_FRAME, + 4, + { + { 0x00800004 | (173 << 6), -1 }, /* movi r2,__NR_rt_sigreturn */ + { 0x003b683a, -1 }, /* trap */ + { TRAMP_SENTINEL_INSN } + }, + nios2_linux_rt_sigreturn_init +}; + +/* When FRAME is at a syscall instruction, return the PC of the next + instruction to be executed. */ + +static CORE_ADDR +nios2_linux_syscall_next_pc (struct frame_info *frame) +{ + CORE_ADDR pc = get_frame_pc (frame); + ULONGEST syscall_nr = get_frame_register_unsigned (frame, NIOS2_R2_REGNUM); + + /* If we are about to make a sigreturn syscall, use the unwinder to + decode the signal frame. */ + if (syscall_nr == 119 /* sigreturn */ + || syscall_nr == 173 /* rt_sigreturn */) + return frame_unwind_caller_pc (frame); + + return pc + NIOS2_OPCODE_SIZE; +} + +/* Hook function for gdbarch_register_osabi. */ + +static void +nios2_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) +{ + struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); + + linux_init_abi (info, gdbarch); + + /* Shared library handling. */ + set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); + set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); + + set_solib_svr4_fetch_link_map_offsets (gdbarch, + svr4_ilp32_fetch_link_map_offsets); + /* Enable TLS support. */ + set_gdbarch_fetch_tls_load_module_address (gdbarch, + svr4_fetch_objfile_link_map); + /* Core file support. */ + set_gdbarch_regset_from_core_section (gdbarch, + nios2_regset_from_core_section); + /* Linux signal frame unwinders. */ + tramp_frame_prepend_unwinder (gdbarch, + &nios2_linux_sigreturn_tramp_frame); + tramp_frame_prepend_unwinder (gdbarch, + &nios2_linux_rt_sigreturn_tramp_frame); + + tdep->syscall_next_pc = nios2_linux_syscall_next_pc; + + /* Index of target address word in glibc jmp_buf. */ + tdep->jb_pc = 10; +} + +/* Provide a prototype to silence -Wmissing-prototypes. */ + +extern initialize_file_ftype _initialize_nios2_linux_tdep; + +void +_initialize_nios2_linux_tdep (void) +{ + gdbarch_register_osabi (bfd_arch_nios2, 0, GDB_OSABI_LINUX, + nios2_linux_init_abi); + + initialize_tdesc_nios2_linux (); +} diff --git a/gdb/nios2-tdep.c b/gdb/nios2-tdep.c new file mode 100644 index 00000000000..055dc76900b --- /dev/null +++ b/gdb/nios2-tdep.c @@ -0,0 +1,1637 @@ +/* Target-machine dependent code for Nios II, for GDB. + Copyright (C) 2012-2013 Free Software Foundation, Inc. + Contributed by Peter Brookes (pbrookes@altera.com) + and Andrew Draper (adraper@altera.com). + Contributed by Mentor Graphics, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include "defs.h" +#include "frame.h" +#include "frame-unwind.h" +#include "frame-base.h" +#include "trad-frame.h" +#include "dwarf2-frame.h" +#include "symtab.h" +#include "inferior.h" +#include "gdbtypes.h" +#include "gdbcore.h" +#include "gdbcmd.h" +#include "osabi.h" +#include "target.h" +#include "dis-asm.h" +#include "regcache.h" +#include "value.h" +#include "symfile.h" +#include "arch-utils.h" +#include "floatformat.h" +#include "gdb_assert.h" +#include "infcall.h" +#include "regset.h" +#include "target-descriptions.h" + +/* To get entry_point_address. */ +#include "objfiles.h" + +/* Nios II ISA specific encodings and macros. */ +#include "opcode/nios2.h" + +/* Nios II specific header. */ +#include "nios2-tdep.h" + +#include "features/nios2.c" + +/* Control debugging information emitted in this file. */ + +static int nios2_debug = 0; + +/* The following structures are used in the cache for prologue + analysis; see the reg_value and reg_saved tables in + struct nios2_unwind_cache, respectively. */ + +/* struct reg_value is used to record that a register has the same value + as reg at the given offset from the start of a function. */ + +struct reg_value +{ + int reg; + unsigned int offset; +}; + +/* struct reg_saved is used to record that a register value has been saved at + basereg + addr, for basereg >= 0. If basereg < 0, that indicates + that the register is not known to have been saved. Note that when + basereg == NIOS2_Z_REGNUM (that is, r0, which holds value 0), + addr is an absolute address. */ + +struct reg_saved +{ + int basereg; + CORE_ADDR addr; +}; + +struct nios2_unwind_cache +{ + /* The frame's base, optionally used by the high-level debug info. */ + CORE_ADDR base; + + /* The previous frame's inner most stack address. Used as this + frame ID's stack_addr. */ + CORE_ADDR cfa; + + /* The address of the first instruction in this function. */ + CORE_ADDR pc; + + /* Which register holds the return address for the frame. */ + int return_regnum; + + /* Table indicating what changes have been made to each register. */ + struct reg_value reg_value[NIOS2_NUM_REGS]; + + /* Table indicating where each register has been saved. */ + struct reg_saved reg_saved[NIOS2_NUM_REGS]; +}; + + +/* This array is a mapping from Dwarf-2 register numbering to GDB's. */ + +static int nios2_dwarf2gdb_regno_map[] = +{ + 0, 1, 2, 3, + 4, 5, 6, 7, + 8, 9, 10, 11, + 12, 13, 14, 15, + 16, 17, 18, 19, + 20, 21, 22, 23, + 24, 25, + NIOS2_GP_REGNUM, /* 26 */ + NIOS2_SP_REGNUM, /* 27 */ + NIOS2_FP_REGNUM, /* 28 */ + NIOS2_EA_REGNUM, /* 29 */ + NIOS2_BA_REGNUM, /* 30 */ + NIOS2_RA_REGNUM, /* 31 */ + NIOS2_PC_REGNUM, /* 32 */ + NIOS2_STATUS_REGNUM, /* 33 */ + NIOS2_ESTATUS_REGNUM, /* 34 */ + NIOS2_BSTATUS_REGNUM, /* 35 */ + NIOS2_IENABLE_REGNUM, /* 36 */ + NIOS2_IPENDING_REGNUM, /* 37 */ + NIOS2_CPUID_REGNUM, /* 38 */ + 39, /* CTL6 */ /* 39 */ + NIOS2_EXCEPTION_REGNUM, /* 40 */ + NIOS2_PTEADDR_REGNUM, /* 41 */ + NIOS2_TLBACC_REGNUM, /* 42 */ + NIOS2_TLBMISC_REGNUM, /* 43 */ + NIOS2_ECCINJ_REGNUM, /* 44 */ + NIOS2_BADADDR_REGNUM, /* 45 */ + NIOS2_CONFIG_REGNUM, /* 46 */ + NIOS2_MPUBASE_REGNUM, /* 47 */ + NIOS2_MPUACC_REGNUM /* 48 */ +}; + + +/* Implement the dwarf2_reg_to_regnum gdbarch method. */ + +static int +nios2_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int dw_reg) +{ + if (dw_reg < 0 || dw_reg > NIOS2_NUM_REGS) + { + warning (_("Dwarf-2 uses unmapped register #%d\n"), dw_reg); + return dw_reg; + } + + return nios2_dwarf2gdb_regno_map[dw_reg]; +} + +/* Canonical names for the 49 registers. */ + +static const char *const nios2_reg_names[NIOS2_NUM_REGS] = +{ + "zero", "at", "r2", "r3", "r4", "r5", "r6", "r7", + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", + "et", "bt", "gp", "sp", "fp", "ea", "ba", "ra", + "pc", + "status", "estatus", "bstatus", "ienable", + "ipending", "cpuid", "ctl6", "exception", + "pteaddr", "tlbacc", "tlbmisc", "eccinj", + "badaddr", "config", "mpubase", "mpuacc" +}; + +/* Implement the register_name gdbarch method. */ + +static const char * +nios2_register_name (struct gdbarch *gdbarch, int regno) +{ + /* Use mnemonic aliases for GPRs. */ + if (regno >= 0 && regno < NIOS2_NUM_REGS) + return nios2_reg_names[regno]; + else + return tdesc_register_name (gdbarch, regno); +} + +/* Implement the register_type gdbarch method. */ + +static struct type * +nios2_register_type (struct gdbarch *gdbarch, int regno) +{ + /* If the XML description has register information, use that to + determine the register type. */ + if (tdesc_has_registers (gdbarch_target_desc (gdbarch))) + return tdesc_register_type (gdbarch, regno); + + if (regno == NIOS2_PC_REGNUM) + return builtin_type (gdbarch)->builtin_func_ptr; + else if (regno == NIOS2_SP_REGNUM) + return builtin_type (gdbarch)->builtin_data_ptr; + else + return builtin_type (gdbarch)->builtin_uint32; +} + +/* Given a return value in REGCACHE with a type VALTYPE, + extract and copy its value into VALBUF. */ + +static void +nios2_extract_return_value (struct gdbarch *gdbarch, struct type *valtype, + struct regcache *regcache, gdb_byte *valbuf) +{ + int len = TYPE_LENGTH (valtype); + + /* Return values of up to 8 bytes are returned in $r2 $r3. */ + if (len <= register_size (gdbarch, NIOS2_R2_REGNUM)) + regcache_cooked_read (regcache, NIOS2_R2_REGNUM, valbuf); + else + { + gdb_assert (len <= (register_size (gdbarch, NIOS2_R2_REGNUM) + + register_size (gdbarch, NIOS2_R3_REGNUM))); + regcache_cooked_read (regcache, NIOS2_R2_REGNUM, valbuf); + regcache_cooked_read (regcache, NIOS2_R3_REGNUM, valbuf + 4); + } +} + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +static void +nios2_store_return_value (struct gdbarch *gdbarch, struct type *valtype, + struct regcache *regcache, const gdb_byte *valbuf) +{ + int len = TYPE_LENGTH (valtype); + + /* Return values of up to 8 bytes are returned in $r2 $r3. */ + if (len <= register_size (gdbarch, NIOS2_R2_REGNUM)) + regcache_cooked_write (regcache, NIOS2_R2_REGNUM, valbuf); + else + { + gdb_assert (len <= (register_size (gdbarch, NIOS2_R2_REGNUM) + + register_size (gdbarch, NIOS2_R3_REGNUM))); + regcache_cooked_write (regcache, NIOS2_R2_REGNUM, valbuf); + regcache_cooked_write (regcache, NIOS2_R3_REGNUM, valbuf + 4); + } +} + + +/* Set up the default values of the registers. */ + +static void +nios2_setup_default (struct nios2_unwind_cache *cache) +{ + int i; + + for (i = 0; i < NIOS2_NUM_REGS; i++) + { + /* All registers start off holding their previous values. */ + cache->reg_value[i].reg = i; + cache->reg_value[i].offset = 0; + + /* All registers start off not saved. */ + cache->reg_saved[i].basereg = -1; + cache->reg_saved[i].addr = 0; + } +} + +/* Initialize the unwind cache. */ + +static void +nios2_init_cache (struct nios2_unwind_cache *cache, CORE_ADDR pc) +{ + cache->base = 0; + cache->cfa = 0; + cache->pc = pc; + cache->return_regnum = NIOS2_RA_REGNUM; + nios2_setup_default (cache); +} + +/* Helper function to identify when we're in a function epilogue; + that is, the part of the function from the point at which the + stack adjustment is made, to the return or sibcall. On Nios II, + we want to check that the CURRENT_PC is a return-type instruction + and that the previous instruction is a stack adjustment. + START_PC is the beginning of the function in question. */ + +static int +nios2_in_epilogue_p (struct gdbarch *gdbarch, + CORE_ADDR current_pc, + CORE_ADDR start_pc) +{ + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + + /* There has to be a previous instruction in the function. */ + if (current_pc > start_pc) + { + + /* Check whether the previous instruction was a stack + adjustment. */ + unsigned int insn + = read_memory_unsigned_integer (current_pc - NIOS2_OPCODE_SIZE, + NIOS2_OPCODE_SIZE, byte_order); + + if ((insn & 0xffc0003c) == 0xdec00004 /* ADDI sp, sp, */ + || (insn & 0xffc1ffff) == 0xdec1883a /* ADD sp, sp, */ + || (insn & 0xffc0003f) == 0xdec00017) /* LDW sp, constant(sp) */ + { + /* Then check if it's followed by a return or a tail + call. */ + insn = read_memory_unsigned_integer (current_pc, NIOS2_OPCODE_SIZE, + byte_order); + + if (insn == 0xf800283a /* RET */ + || insn == 0xe800083a /* ERET */ + || (insn & 0x07ffffff) == 0x0000683a /* JMP */ + || (insn & 0xffc0003f) == 6) /* BR */ + return 1; + } + } + return 0; +} + +/* Implement the in_function_epilogue_p gdbarch method. */ + +static int +nios2_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc) +{ + CORE_ADDR func_addr; + + if (find_pc_partial_function (pc, NULL, &func_addr, NULL)) + return nios2_in_epilogue_p (gdbarch, pc, func_addr); + + return 0; +} + +/* Define some instruction patterns supporting wildcard bits via a + mask. */ + +typedef struct +{ + unsigned int insn; + unsigned int mask; +} wild_insn; + +static const wild_insn profiler_insn[] = +{ + { 0x0010e03a, 0x00000000 }, /* nextpc r8 */ + { 0xf813883a, 0x00000000 }, /* mov r9,ra */ + { 0x02800034, 0x003fffc0 }, /* movhi r10,257 */ + { 0x52800004, 0x003fffc0 }, /* addi r10,r10,-31992 */ + { 0x00000000, 0xffffffc0 }, /* call */ + { 0x483f883a, 0x00000000 } /* mov ra,r9 */ +}; + +static const wild_insn irqentry_insn[] = +{ + { 0x0031307a, 0x00000000 }, /* rdctl et,estatus */ + { 0xc600004c, 0x00000000 }, /* andi et,et,1 */ + { 0xc0000026, 0x003fffc0 }, /* beq et,zero, */ + { 0x0031313a, 0x00000000 }, /* rdctl et,ipending */ + { 0xc0000026, 0x003fffc0 } /* beq et,zero, */ +}; + + +/* Attempt to match SEQUENCE, which is COUNT insns long, at START_PC. */ + +static int +nios2_match_sequence (struct gdbarch *gdbarch, CORE_ADDR start_pc, + const wild_insn *sequence, int count) +{ + CORE_ADDR pc = start_pc; + int i; + unsigned int insn; + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + + for (i = 0 ; i < count ; i++) + { + insn = read_memory_unsigned_integer (pc, NIOS2_OPCODE_SIZE, byte_order); + if ((insn & ~sequence[i].mask) != sequence[i].insn) + return 0; + + pc += NIOS2_OPCODE_SIZE; + } + + return 1; +} + +/* Do prologue analysis, returning the PC of the first instruction + after the function prologue. Assumes CACHE has already been + initialized. THIS_FRAME can be null, in which case we are only + interested in skipping the prologue. Otherwise CACHE is filled in + from the frame information. + + The prologue will consist of the following parts: + 1) Optional profiling instrumentation. The old version uses six + instructions. We step over this if there is an exact match. + nextpc r8 + mov r9, ra + movhi r10, %hiadj(.LP2) + addi r10, r10, %lo(.LP2) + call mcount + mov ra, r9 + The new version uses two or three instructions (the last of + these might get merged in with the STW which saves RA to the + stack). We interpret these. + mov r8, ra + call mcount + mov ra, r8 + + 2) Optional interrupt entry decision. Again, we step over + this if there is an exact match. + rdctl et,estatus + andi et,et,1 + beq et,zero, + rdctl et,ipending + beq et,zero, + + 3) A stack adjustment or stack which, which will be one of: + addi sp, sp, -constant + or: + movi r8, constant + sub sp, sp, r8 + or + movhi r8, constant + addi r8, r8, constant + sub sp, sp, r8 + or + movhi rx, %hiadj(newstack) + addhi rx, rx, %lo(newstack) + stw sp, constant(rx) + mov sp, rx + + 4) An optional stack check, which can take either of these forms: + bgeu sp, rx, +8 + break 3 + or + bltu sp, rx, .Lstack_overflow + ... + .Lstack_overflow: + break 3 + + 5) Saving any registers which need to be saved. These will + normally just be stored onto the stack: + stw rx, constant(sp) + but in the large frame case will use r8 as an offset back + to the cfa: + add r8, r8, sp + stw rx, -constant(r8) + + Saving control registers looks slightly different: + rdctl rx, ctlN + stw rx, constant(sp) + + 6) An optional FP setup, either if the user has requested a + frame pointer or if the function calls alloca. + This is always: + mov fp, sp + + The prologue instructions may be interleaved, and the register + saves and FP setup can occur in either order. + + To cope with all this variability we decode all the instructions + from the start of the prologue until we hit a branch, call or + return. For each of the instructions mentioned in 3, 4 and 5 we + handle the limited cases of stores to the stack and operations + on constant values. */ + +static CORE_ADDR +nios2_analyze_prologue (struct gdbarch *gdbarch, const CORE_ADDR start_pc, + const CORE_ADDR current_pc, + struct nios2_unwind_cache *cache, + struct frame_info *this_frame) +{ + /* Maximum lines of prologue to check. + Note that this number should not be too large, else we can + potentially end up iterating through unmapped memory. */ + CORE_ADDR limit_pc = start_pc + 200; + int regno; + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + + /* Does the frame set up the FP register? */ + int base_reg = 0; + + struct reg_value *value = cache->reg_value; + struct reg_value temp_value[NIOS2_NUM_REGS]; + + int i; + + /* Save the starting PC so we can correct the pc after running + through the prolog, using symbol info. */ + CORE_ADDR pc = start_pc; + + /* Is this an exception handler? */ + int exception_handler = 0; + + /* What was the original value of SP (or fake original value for + functions which switch stacks? */ + CORE_ADDR frame_high; + + /* Is this the end of the prologue? */ + int within_prologue = 1; + + CORE_ADDR prologue_end; + + /* Is this the innermost function? */ + int innermost = (this_frame ? (frame_relative_level (this_frame) == 0) : 1); + + if (nios2_debug) + fprintf_unfiltered (gdb_stdlog, + "{ nios2_analyze_prologue start=%s, current=%s ", + paddress (gdbarch, start_pc), + paddress (gdbarch, current_pc)); + + /* Set up the default values of the registers. */ + nios2_setup_default (cache); + + /* If the first few instructions are the profile entry, then skip + over them. Newer versions of the compiler use more efficient + profiling code. */ + if (nios2_match_sequence (gdbarch, pc, profiler_insn, + ARRAY_SIZE (profiler_insn))) + pc += ARRAY_SIZE (profiler_insn) * NIOS2_OPCODE_SIZE; + + /* If the first few instructions are an interrupt entry, then skip + over them too. */ + if (nios2_match_sequence (gdbarch, pc, irqentry_insn, + ARRAY_SIZE (irqentry_insn))) + { + pc += ARRAY_SIZE (irqentry_insn) * NIOS2_OPCODE_SIZE; + exception_handler = 1; + } + + prologue_end = start_pc; + + /* Find the prologue instructions. */ + while (pc < limit_pc && within_prologue) + { + /* Present instruction. */ + uint32_t insn; + + int prologue_insn = 0; + + if (pc == current_pc) + { + /* When we reach the current PC we must save the current + register state (for the backtrace) but keep analysing + because there might be more to find out (eg. is this an + exception handler). */ + memcpy (temp_value, value, sizeof (temp_value)); + value = temp_value; + if (nios2_debug) + fprintf_unfiltered (gdb_stdlog, "*"); + } + + insn = read_memory_unsigned_integer (pc, NIOS2_OPCODE_SIZE, byte_order); + pc += NIOS2_OPCODE_SIZE; + + if (nios2_debug) + fprintf_unfiltered (gdb_stdlog, "[%08X]", insn); + + /* The following instructions can appear in the prologue. */ + + if ((insn & 0x0001ffff) == 0x0001883a) + { + /* ADD rc, ra, rb (also used for MOV) */ + + int ra = GET_IW_A (insn); + int rb = GET_IW_B (insn); + int rc = GET_IW_C (insn); + + if (rc == NIOS2_SP_REGNUM + && rb == 0 + && value[ra].reg == cache->reg_saved[NIOS2_SP_REGNUM].basereg) + { + /* If the previous value of SP is available somewhere + near the new stack pointer value then this is a + stack switch. */ + + /* If any registers were saved on the stack before then + we can't backtrace into them now. */ + for (i = 0 ; i < NIOS2_NUM_REGS ; i++) + { + if (cache->reg_saved[i].basereg == NIOS2_SP_REGNUM) + cache->reg_saved[i].basereg = -1; + if (value[i].reg == NIOS2_SP_REGNUM) + value[i].reg = -1; + } + + /* Create a fake "high water mark" 4 bytes above where SP + was stored and fake up the registers to be consistent + with that. */ + value[NIOS2_SP_REGNUM].reg = NIOS2_SP_REGNUM; + value[NIOS2_SP_REGNUM].offset + = (value[ra].offset + - cache->reg_saved[NIOS2_SP_REGNUM].addr + - 4); + cache->reg_saved[NIOS2_SP_REGNUM].basereg = NIOS2_SP_REGNUM; + cache->reg_saved[NIOS2_SP_REGNUM].addr = -4; + } + + else if (rc != 0) + { + if (value[rb].reg == 0) + value[rc].reg = value[ra].reg; + else if (value[ra].reg == 0) + value[rc].reg = value[rb].reg; + else + value[rc].reg = -1; + value[rc].offset = value[ra].offset + value[rb].offset; + } + prologue_insn = 1; + } + + else if ((insn & 0x0001ffff) == 0x0001983a) + { + /* SUB rc, ra, rb */ + + int ra = GET_IW_A (insn); + int rb = GET_IW_B (insn); + int rc = GET_IW_C (insn); + + if (rc != 0) + { + if (value[rb].reg == 0) + value[rc].reg = value[ra].reg; + else + value[rc].reg = -1; + value[rc].offset = value[ra].offset - value[rb].offset; + } + } + + else if ((insn & 0x0000003f) == 0x00000004) + { + /* ADDI rb, ra, immed (also used for MOVI) */ + short immed = GET_IW_IMM16 (insn); + int ra = GET_IW_A (insn); + int rb = GET_IW_B (insn); + + /* The first stack adjustment is part of the prologue. + Any subsequent stack adjustments are either down to + alloca or the epilogue so stop analysing when we hit + them. */ + if (rb == NIOS2_SP_REGNUM + && (value[rb].offset != 0 || value[ra].reg != NIOS2_SP_REGNUM)) + break; + + if (rb != 0) + { + value[rb].reg = value[ra].reg; + value[rb].offset = value[ra].offset + immed; + } + + prologue_insn = 1; + } + + else if ((insn & 0x0000003f) == 0x00000034) + { + /* ORHI rb, ra, immed (also used for MOVHI) */ + unsigned int immed = GET_IW_IMM16 (insn); + int ra = GET_IW_A (insn); + int rb = GET_IW_B (insn); + + if (rb != 0) + { + value[rb].reg = (value[ra].reg == 0) ? 0 : -1; + value[rb].offset = value[ra].offset | (immed << 16); + } + } + + else if ((insn & IW_OP_MASK) == OP_STW + || (insn & IW_OP_MASK) == OP_STWIO) + { + /* STW rb, immediate(ra) */ + + short immed16 = GET_IW_IMM16 (insn); + int ra = GET_IW_A (insn); + int rb = GET_IW_B (insn); + + /* Are we storing the original value of a register? + For exception handlers the value of EA-4 (return + address from interrupts etc) is sometimes stored. */ + int orig = value[rb].reg; + if (orig > 0 + && (value[rb].offset == 0 + || (orig == NIOS2_EA_REGNUM && value[rb].offset == -4))) + { + /* We are most interested in stores to the stack, but + also take note of stores to other places as they + might be useful later. */ + if ((value[ra].reg == NIOS2_SP_REGNUM + && cache->reg_saved[orig].basereg != NIOS2_SP_REGNUM) + || cache->reg_saved[orig].basereg == -1) + { + if (pc < current_pc) + { + /* Save off callee saved registers. */ + cache->reg_saved[orig].basereg = value[ra].reg; + cache->reg_saved[orig].addr + = value[ra].offset + GET_IW_IMM16 (insn); + } + + prologue_insn = 1; + + if (orig == NIOS2_EA_REGNUM || orig == NIOS2_ESTATUS_REGNUM) + exception_handler = 1; + } + } + else + /* Non-stack memory writes are not part of the + prologue. */ + within_prologue = 0; + } + + else if ((insn & 0xffc1f83f) == 0x0001303a) + { + /* RDCTL rC, ctlN */ + int rc = GET_IW_C (insn); + int n = GET_IW_CONTROL_REGNUM (insn); + + if (rc != 0) + { + value[rc].reg = NIOS2_STATUS_REGNUM + n; + value[rc].offset = 0; + } + + prologue_insn = 1; + } + + else if ((insn & 0x0000003f) == 0 + && value[8].reg == NIOS2_RA_REGNUM + && value[8].offset == 0 + && value[NIOS2_SP_REGNUM].reg == NIOS2_SP_REGNUM + && value[NIOS2_SP_REGNUM].offset == 0) + { + /* A CALL instruction. This is treated as a call to mcount + if ra has been stored into r8 beforehand and if it's + before the stack adjust. + Note mcount corrupts r2-r3, r9-r15 & ra. */ + for (i = 2 ; i <= 3 ; i++) + value[i].reg = -1; + for (i = 9 ; i <= 15 ; i++) + value[i].reg = -1; + value[NIOS2_RA_REGNUM].reg = -1; + + prologue_insn = 1; + } + + else if ((insn & 0xf83fffff) == 0xd800012e) + { + /* BGEU sp, rx, +8 + BREAK 3 + This instruction sequence is used in stack checking; + we can ignore it. */ + unsigned int next_insn + = read_memory_unsigned_integer (pc, NIOS2_OPCODE_SIZE, byte_order); + + if (next_insn != 0x003da0fa) + within_prologue = 0; + else + pc += NIOS2_OPCODE_SIZE; + } + + else if ((insn & 0xf800003f) == 0xd8000036) + { + /* BLTU sp, rx, .Lstackoverflow + If the location branched to holds a BREAK 3 instruction + then this is also stack overflow detection. We can + ignore it. */ + CORE_ADDR target_pc = pc + ((insn & 0x3fffc0) >> 6); + unsigned int target_insn + = read_memory_unsigned_integer (target_pc, NIOS2_OPCODE_SIZE, + byte_order); + + if (target_insn != 0x003da0fa) + within_prologue = 0; + } + + /* Any other instructions are allowed to be moved up into the + prologue. If we reach a branch, call or return then the + prologue is considered over. We also consider a second stack + adjustment as terminating the prologue (see above). */ + else + { + switch (GET_IW_OP (insn)) + { + case OP_BEQ: + case OP_BGE: + case OP_BGEU: + case OP_BLT: + case OP_BLTU: + case OP_BNE: + case OP_BR: + case OP_CALL: + within_prologue = 0; + break; + case OP_OPX: + if (GET_IW_OPX (insn) == OPX_RET + || GET_IW_OPX (insn) == OPX_ERET + || GET_IW_OPX (insn) == OPX_BRET + || GET_IW_OPX (insn) == OPX_CALLR + || GET_IW_OPX (insn) == OPX_JMP) + within_prologue = 0; + break; + default: + break; + } + } + + if (prologue_insn) + prologue_end = pc; + } + + /* If THIS_FRAME is NULL, we are being called from skip_prologue + and are only interested in the PROLOGUE_END value, so just + return that now and skip over the cache updates, which depend + on having frame information. */ + if (this_frame == NULL) + return prologue_end; + + /* If we are in the function epilogue and have already popped + registers off the stack in preparation for returning, then we + want to go back to the original register values. */ + if (innermost && nios2_in_epilogue_p (gdbarch, current_pc, start_pc)) + nios2_setup_default (cache); + + /* Exception handlers use a different return address register. */ + if (exception_handler) + cache->return_regnum = NIOS2_EA_REGNUM; + + if (nios2_debug) + fprintf_unfiltered (gdb_stdlog, "\n-> retreg=%d, ", cache->return_regnum); + + if (cache->reg_value[NIOS2_FP_REGNUM].reg == NIOS2_SP_REGNUM) + /* If the FP now holds an offset from the CFA then this is a + normal frame which uses the frame pointer. */ + base_reg = NIOS2_FP_REGNUM; + else if (cache->reg_value[NIOS2_SP_REGNUM].reg == NIOS2_SP_REGNUM) + /* FP doesn't hold an offset from the CFA. If SP still holds an + offset from the CFA then we might be in a function which omits + the frame pointer, or we might be partway through the prologue. + In both cases we can find the CFA using SP. */ + base_reg = NIOS2_SP_REGNUM; + else + { + /* Somehow the stack pointer has been corrupted. + We can't return. */ + if (nios2_debug) + fprintf_unfiltered (gdb_stdlog, " }\n"); + return 0; + } + + if (cache->reg_value[base_reg].offset == 0 + || cache->reg_saved[NIOS2_RA_REGNUM].basereg != NIOS2_SP_REGNUM + || cache->reg_saved[cache->return_regnum].basereg != NIOS2_SP_REGNUM) + { + /* If the frame didn't adjust the stack, didn't save RA or + didn't save EA in an exception handler then it must either + be a leaf function (doesn't call any other functions) or it + can't return. If it has called another function then it + can't be a leaf, so set base == 0 to indicate that we can't + backtrace past it. */ + + if (!innermost) + { + /* If it isn't the innermost function then it can't be a + leaf, unless it was interrupted. Check whether RA for + this frame is the same as PC. If so then it probably + wasn't interrupted. */ + CORE_ADDR ra + = get_frame_register_unsigned (this_frame, NIOS2_RA_REGNUM); + + if (ra == current_pc) + { + if (nios2_debug) + fprintf_unfiltered + (gdb_stdlog, + ", r%d@r%d+?> }\n", + paddress (gdbarch, cache->reg_value[base_reg].offset), + cache->reg_saved[NIOS2_RA_REGNUM].basereg, + cache->return_regnum, + cache->reg_saved[cache->return_regnum].basereg); + return 0; + } + } + } + + /* Get the value of whichever register we are using for the + base. */ + cache->base = get_frame_register_unsigned (this_frame, base_reg); + + /* What was the value of SP at the start of this function (or just + after the stack switch). */ + frame_high = cache->base - cache->reg_value[base_reg].offset; + + /* Adjust all the saved registers such that they contain addresses + instead of offsets. */ + for (i = 0; i < NIOS2_NUM_REGS; i++) + if (cache->reg_saved[i].basereg == NIOS2_SP_REGNUM) + { + cache->reg_saved[i].basereg = NIOS2_Z_REGNUM; + cache->reg_saved[i].addr += frame_high; + } + + for (i = 0; i < NIOS2_NUM_REGS; i++) + if (cache->reg_saved[i].basereg == NIOS2_GP_REGNUM) + { + CORE_ADDR gp = get_frame_register_unsigned (this_frame, + NIOS2_GP_REGNUM); + + for ( ; i < NIOS2_NUM_REGS; i++) + if (cache->reg_saved[i].basereg == NIOS2_GP_REGNUM) + { + cache->reg_saved[i].basereg = NIOS2_Z_REGNUM; + cache->reg_saved[i].addr += gp; + } + } + + /* Work out what the value of SP was on the first instruction of + this function. If we didn't switch stacks then this can be + trivially computed from the base address. */ + if (cache->reg_saved[NIOS2_SP_REGNUM].basereg == NIOS2_Z_REGNUM) + cache->cfa + = read_memory_unsigned_integer (cache->reg_saved[NIOS2_SP_REGNUM].addr, + 4, byte_order); + else + cache->cfa = frame_high; + + /* Exception handlers restore ESTATUS into STATUS. */ + if (exception_handler) + { + cache->reg_saved[NIOS2_STATUS_REGNUM] + = cache->reg_saved[NIOS2_ESTATUS_REGNUM]; + cache->reg_saved[NIOS2_ESTATUS_REGNUM].basereg = -1; + } + + if (nios2_debug) + fprintf_unfiltered (gdb_stdlog, "cfa=%s }\n", + paddress (gdbarch, cache->cfa)); + + return prologue_end; +} + +/* Implement the skip_prologue gdbarch hook. */ + +static CORE_ADDR +nios2_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR start_pc) +{ + CORE_ADDR limit_pc; + CORE_ADDR func_addr; + + struct nios2_unwind_cache cache; + + /* See if we can determine the end of the prologue via the symbol + table. If so, then return either PC, or the PC after the + prologue, whichever is greater. */ + if (find_pc_partial_function (start_pc, NULL, &func_addr, NULL)) + { + CORE_ADDR post_prologue_pc + = skip_prologue_using_sal (gdbarch, func_addr); + + if (post_prologue_pc != 0) + return max (start_pc, post_prologue_pc); + } + + /* Prologue analysis does the rest.... */ + nios2_init_cache (&cache, start_pc); + return nios2_analyze_prologue (gdbarch, start_pc, start_pc, &cache, NULL); +} + +/* Implement the breakpoint_from_pc gdbarch hook. */ + +static const gdb_byte* +nios2_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *bp_addr, + int *bp_size) +{ + /* break encoding: 31->27 26->22 21->17 16->11 10->6 5->0 */ + /* 00000 00000 0x1d 0x2d 11111 0x3a */ + /* 00000 00000 11101 101101 11111 111010 */ + /* In bytes: 00000000 00111011 01101111 11111010 */ + /* 0x0 0x3b 0x6f 0xfa */ + static const gdb_byte breakpoint_le[] = {0xfa, 0x6f, 0x3b, 0x0}; + static const gdb_byte breakpoint_be[] = {0x0, 0x3b, 0x6f, 0xfa}; + + enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch); + + *bp_size = 4; + if (gdbarch_byte_order_for_code (gdbarch) == BFD_ENDIAN_BIG) + return breakpoint_be; + else + return breakpoint_le; +} + +/* Implement the print_insn gdbarch method. */ + +static int +nios2_print_insn (bfd_vma memaddr, disassemble_info *info) +{ + if (info->endian == BFD_ENDIAN_BIG) + return print_insn_big_nios2 (memaddr, info); + else + return print_insn_little_nios2 (memaddr, info); +} + + +/* Implement the frame_align gdbarch method. */ + +static CORE_ADDR +nios2_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) +{ + return align_down (addr, 4); +} + + +/* Implement the return_value gdbarch method. */ + +static enum return_value_convention +nios2_return_value (struct gdbarch *gdbarch, struct value *function, + struct type *type, struct regcache *regcache, + gdb_byte *readbuf, const gdb_byte *writebuf) +{ + if (TYPE_LENGTH (type) > 8) + return RETURN_VALUE_STRUCT_CONVENTION; + + if (readbuf) + nios2_extract_return_value (gdbarch, type, regcache, readbuf); + if (writebuf) + nios2_store_return_value (gdbarch, type, regcache, writebuf); + + return RETURN_VALUE_REGISTER_CONVENTION; +} + +/* Implement the dummy_id gdbarch method. */ + +static struct frame_id +nios2_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame) +{ + return frame_id_build + (get_frame_register_unsigned (this_frame, NIOS2_SP_REGNUM), + get_frame_pc (this_frame)); +} + +/* Implement the push_dummy_call gdbarch method. */ + +static CORE_ADDR +nios2_push_dummy_call (struct gdbarch *gdbarch, struct value *function, + struct regcache *regcache, CORE_ADDR bp_addr, + int nargs, struct value **args, CORE_ADDR sp, + int struct_return, CORE_ADDR struct_addr) +{ + int argreg; + int float_argreg; + int argnum; + int len = 0; + int stack_offset = 0; + CORE_ADDR func_addr = find_function_addr (function, NULL); + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + + /* Set the return address register to point to the entry point of + the program, where a breakpoint lies in wait. */ + regcache_cooked_write_signed (regcache, NIOS2_RA_REGNUM, bp_addr); + + /* Now make space on the stack for the args. */ + for (argnum = 0; argnum < nargs; argnum++) + len += align_up (TYPE_LENGTH (value_type (args[argnum])), 4); + sp -= len; + + /* Initialize the register pointer. */ + argreg = NIOS2_FIRST_ARGREG; + + /* The struct_return pointer occupies the first parameter-passing + register. */ + if (struct_return) + regcache_cooked_write_unsigned (regcache, argreg++, struct_addr); + + /* Now load as many as possible of the first arguments into + registers, and push the rest onto the stack. Loop through args + from first to last. */ + for (argnum = 0; argnum < nargs; argnum++) + { + const gdb_byte *val; + gdb_byte valbuf[MAX_REGISTER_SIZE]; + struct value *arg = args[argnum]; + struct type *arg_type = check_typedef (value_type (arg)); + int len = TYPE_LENGTH (arg_type); + enum type_code typecode = TYPE_CODE (arg_type); + + val = value_contents (arg); + + /* Copy the argument to general registers or the stack in + register-sized pieces. Large arguments are split between + registers and stack. */ + while (len > 0) + { + int partial_len = (len < 4 ? len : 4); + + if (argreg <= NIOS2_LAST_ARGREG) + { + /* The argument is being passed in a register. */ + CORE_ADDR regval = extract_unsigned_integer (val, partial_len, + byte_order); + + regcache_cooked_write_unsigned (regcache, argreg, regval); + argreg++; + } + else + { + /* The argument is being passed on the stack. */ + CORE_ADDR addr = sp + stack_offset; + + write_memory (addr, val, partial_len); + stack_offset += align_up (partial_len, 4); + } + + len -= partial_len; + val += partial_len; + } + } + + regcache_cooked_write_signed (regcache, NIOS2_SP_REGNUM, sp); + + /* Return adjusted stack pointer. */ + return sp; +} + +/* Implement the unwind_pc gdbarch method. */ + +static CORE_ADDR +nios2_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame) +{ + gdb_byte buf[4]; + + frame_unwind_register (next_frame, NIOS2_PC_REGNUM, buf); + return extract_typed_address (buf, builtin_type (gdbarch)->builtin_func_ptr); +} + +/* Implement the unwind_sp gdbarch method. */ + +static CORE_ADDR +nios2_unwind_sp (struct gdbarch *gdbarch, struct frame_info *this_frame) +{ + return frame_unwind_register_unsigned (this_frame, NIOS2_SP_REGNUM); +} + +/* Use prologue analysis to fill in the register cache + *THIS_PROLOGUE_CACHE for THIS_FRAME. This function initializes + *THIS_PROLOGUE_CACHE first. */ + +static struct nios2_unwind_cache * +nios2_frame_unwind_cache (struct frame_info *this_frame, + void **this_prologue_cache) +{ + struct gdbarch *gdbarch = get_frame_arch (this_frame); + CORE_ADDR current_pc; + struct nios2_unwind_cache *cache; + int i; + + if (*this_prologue_cache) + return *this_prologue_cache; + + cache = FRAME_OBSTACK_ZALLOC (struct nios2_unwind_cache); + *this_prologue_cache = cache; + + /* Zero all fields. */ + nios2_init_cache (cache, get_frame_func (this_frame)); + + /* Prologue analysis does the rest... */ + current_pc = get_frame_pc (this_frame); + if (cache->pc != 0) + nios2_analyze_prologue (gdbarch, cache->pc, current_pc, cache, this_frame); + + return cache; +} + +/* Implement the this_id function for the normal unwinder. */ + +static void +nios2_frame_this_id (struct frame_info *this_frame, void **this_cache, + struct frame_id *this_id) +{ + struct nios2_unwind_cache *cache = + nios2_frame_unwind_cache (this_frame, this_cache); + + /* This marks the outermost frame. */ + if (cache->base == 0) + return; + + *this_id = frame_id_build (cache->cfa, cache->pc); +} + +/* Implement the prev_register function for the normal unwinder. */ + +static struct value * +nios2_frame_prev_register (struct frame_info *this_frame, void **this_cache, + int regnum) +{ + struct nios2_unwind_cache *cache = + nios2_frame_unwind_cache (this_frame, this_cache); + + gdb_assert (regnum >= 0 && regnum < NIOS2_NUM_REGS); + + /* The PC of the previous frame is stored in the RA register of + the current frame. Frob regnum so that we pull the value from + the correct place. */ + if (regnum == NIOS2_PC_REGNUM) + regnum = cache->return_regnum; + + if (regnum == NIOS2_SP_REGNUM && cache->cfa) + return frame_unwind_got_constant (this_frame, regnum, cache->cfa); + + /* If we've worked out where a register is stored then load it from + there. */ + if (cache->reg_saved[regnum].basereg == NIOS2_Z_REGNUM) + return frame_unwind_got_memory (this_frame, regnum, + cache->reg_saved[regnum].addr); + + return frame_unwind_got_register (this_frame, regnum, regnum); +} + +/* Implement the this_base, this_locals, and this_args hooks + for the normal unwinder. */ + +static CORE_ADDR +nios2_frame_base_address (struct frame_info *this_frame, void **this_cache) +{ + struct nios2_unwind_cache *info + = nios2_frame_unwind_cache (this_frame, this_cache); + + return info->base; +} + +/* Data structures for the normal prologue-analysis-based + unwinder. */ + +static const struct frame_unwind nios2_frame_unwind = +{ + NORMAL_FRAME, + default_frame_unwind_stop_reason, + nios2_frame_this_id, + nios2_frame_prev_register, + NULL, + default_frame_sniffer +}; + +static const struct frame_base nios2_frame_base = +{ + &nios2_frame_unwind, + nios2_frame_base_address, + nios2_frame_base_address, + nios2_frame_base_address +}; + +/* Fill in the register cache *THIS_CACHE for THIS_FRAME for use + in the stub unwinder. */ + +static struct trad_frame_cache * +nios2_stub_frame_cache (struct frame_info *this_frame, void **this_cache) +{ + CORE_ADDR pc; + CORE_ADDR start_addr; + CORE_ADDR stack_addr; + struct trad_frame_cache *this_trad_cache; + struct gdbarch *gdbarch = get_frame_arch (this_frame); + int num_regs = gdbarch_num_regs (gdbarch); + + if (*this_cache != NULL) + return *this_cache; + this_trad_cache = trad_frame_cache_zalloc (this_frame); + *this_cache = this_trad_cache; + + /* The return address is in the link register. */ + trad_frame_set_reg_realreg (this_trad_cache, + gdbarch_pc_regnum (gdbarch), + NIOS2_RA_REGNUM); + + /* Frame ID, since it's a frameless / stackless function, no stack + space is allocated and SP on entry is the current SP. */ + pc = get_frame_pc (this_frame); + find_pc_partial_function (pc, NULL, &start_addr, NULL); + stack_addr = get_frame_register_unsigned (this_frame, NIOS2_SP_REGNUM); + trad_frame_set_id (this_trad_cache, frame_id_build (start_addr, stack_addr)); + /* Assume that the frame's base is the same as the stack pointer. */ + trad_frame_set_this_base (this_trad_cache, stack_addr); + + return this_trad_cache; +} + +/* Implement the this_id function for the stub unwinder. */ + +static void +nios2_stub_frame_this_id (struct frame_info *this_frame, void **this_cache, + struct frame_id *this_id) +{ + struct trad_frame_cache *this_trad_cache + = nios2_stub_frame_cache (this_frame, this_cache); + + trad_frame_get_id (this_trad_cache, this_id); +} + +/* Implement the prev_register function for the stub unwinder. */ + +static struct value * +nios2_stub_frame_prev_register (struct frame_info *this_frame, + void **this_cache, int regnum) +{ + struct trad_frame_cache *this_trad_cache + = nios2_stub_frame_cache (this_frame, this_cache); + + return trad_frame_get_register (this_trad_cache, this_frame, regnum); +} + +/* Implement the sniffer function for the stub unwinder. + This unwinder is used for cases where the normal + prologue-analysis-based unwinder can't work, + such as PLT stubs. */ + +static int +nios2_stub_frame_sniffer (const struct frame_unwind *self, + struct frame_info *this_frame, void **cache) +{ + gdb_byte dummy[4]; + struct obj_section *s; + CORE_ADDR pc = get_frame_address_in_block (this_frame); + + /* Use the stub unwinder for unreadable code. */ + if (target_read_memory (get_frame_pc (this_frame), dummy, 4) != 0) + return 1; + + if (in_plt_section (pc, NULL)) + return 1; + + return 0; +} + +/* Implement the this_base, this_locals, and this_args hooks + for the stub unwinder. */ + +static CORE_ADDR +nios2_stub_frame_base_address (struct frame_info *this_frame, void **this_cache) +{ + struct trad_frame_cache *this_trad_cache + = nios2_stub_frame_cache (this_frame, this_cache); + + return trad_frame_get_this_base (this_trad_cache); +} + +/* Define the data structures for the stub unwinder. */ + +static const struct frame_unwind nios2_stub_frame_unwind = +{ + NORMAL_FRAME, + default_frame_unwind_stop_reason, + nios2_stub_frame_this_id, + nios2_stub_frame_prev_register, + NULL, + nios2_stub_frame_sniffer +}; + +static const struct frame_base nios2_stub_frame_base = +{ + &nios2_stub_frame_unwind, + nios2_stub_frame_base_address, + nios2_stub_frame_base_address, + nios2_stub_frame_base_address +}; + +/* Helper function to read an instruction at PC. */ + +static unsigned long +nios2_fetch_instruction (struct gdbarch *gdbarch, CORE_ADDR pc) +{ + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + + return read_memory_unsigned_integer (pc, NIOS2_OPCODE_SIZE, byte_order); +} + +/* Determine where to set a single step breakpoint while considering + branch prediction. */ + +static CORE_ADDR +nios2_get_next_pc (struct frame_info *frame, CORE_ADDR pc) +{ + struct gdbarch *gdbarch = get_frame_arch (frame); + struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); + unsigned long inst; + int op; + int imm16; + int ra; + int rb; + int ras; + int rbs; + unsigned int rau; + unsigned int rbu; + + inst = nios2_fetch_instruction (gdbarch, pc); + pc += NIOS2_OPCODE_SIZE; + + imm16 = (short) GET_IW_IMM16 (inst); + ra = GET_IW_A (inst); + rb = GET_IW_B (inst); + ras = get_frame_register_signed (frame, ra); + rbs = get_frame_register_signed (frame, rb); + rau = get_frame_register_unsigned (frame, ra); + rbu = get_frame_register_unsigned (frame, rb); + + switch (GET_IW_OP (inst)) + { + case OP_BEQ: + if (ras == rbs) + pc += imm16; + break; + + case OP_BGE: + if (ras >= rbs) + pc += imm16; + break; + + case OP_BGEU: + if (rau >= rbu) + pc += imm16; + break; + + case OP_BLT: + if (ras < rbs) + pc += imm16; + break; + + case OP_BLTU: + if (rau < rbu) + pc += imm16; + break; + + case OP_BNE: + if (ras != rbs) + pc += imm16; + break; + + case OP_BR: + pc += imm16; + break; + + case OP_JMPI: + case OP_CALL: + pc = (pc & 0xf0000000) | (GET_IW_IMM26 (inst) << 2); + break; + + case OP_OPX: + switch (GET_IW_OPX (inst)) + { + case OPX_JMP: + case OPX_CALLR: + case OPX_RET: + pc = ras; + break; + + case OPX_TRAP: + if (tdep->syscall_next_pc != NULL) + return tdep->syscall_next_pc (frame); + + default: + break; + } + break; + default: + break; + } + return pc; +} + +/* Implement the software_single_step gdbarch method. */ + +static int +nios2_software_single_step (struct frame_info *frame) +{ + struct gdbarch *gdbarch = get_frame_arch (frame); + struct address_space *aspace = get_frame_address_space (frame); + CORE_ADDR next_pc = nios2_get_next_pc (frame, get_frame_pc (frame)); + + insert_single_step_breakpoint (gdbarch, aspace, next_pc); + + return 1; +} + +/* Implement the get_longjump_target gdbarch method. */ + +static int +nios2_get_longjmp_target (struct frame_info *frame, CORE_ADDR *pc) +{ + struct gdbarch *gdbarch = get_frame_arch (frame); + struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + CORE_ADDR jb_addr = get_frame_register_unsigned (frame, NIOS2_R4_REGNUM); + gdb_byte buf[4]; + + if (target_read_memory (jb_addr + (tdep->jb_pc * 4), buf, 4)) + return 0; + + *pc = extract_unsigned_integer (buf, 4, byte_order); + return 1; +} + +/* Initialize the Nios II gdbarch. */ + +static struct gdbarch * +nios2_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) +{ + struct gdbarch *gdbarch; + struct gdbarch_tdep *tdep; + int register_bytes, i; + struct tdesc_arch_data *tdesc_data = NULL; + const struct target_desc *tdesc = info.target_desc; + + if (!tdesc_has_registers (tdesc)) + /* Pick a default target description. */ + tdesc = tdesc_nios2; + + /* Check any target description for validity. */ + if (tdesc_has_registers (tdesc)) + { + const struct tdesc_feature *feature; + int valid_p; + + feature = tdesc_find_feature (tdesc, "org.gnu.gdb.nios2.cpu"); + if (feature == NULL) + return NULL; + + tdesc_data = tdesc_data_alloc (); + + valid_p = 1; + + for (i = 0; i < NIOS2_NUM_REGS; i++) + valid_p &= tdesc_numbered_register (feature, tdesc_data, i, + nios2_reg_names[i]); + + if (!valid_p) + { + tdesc_data_cleanup (tdesc_data); + return NULL; + } + } + + /* Find a candidate among the list of pre-declared architectures. */ + arches = gdbarch_list_lookup_by_info (arches, &info); + if (arches != NULL) + return arches->gdbarch; + + /* None found, create a new architecture from the information + provided. */ + tdep = xcalloc (1, sizeof (struct gdbarch_tdep)); + gdbarch = gdbarch_alloc (&info, tdep); + + /* longjmp support not enabled by default. */ + tdep->jb_pc = -1; + + /* Data type sizes. */ + set_gdbarch_ptr_bit (gdbarch, 32); + set_gdbarch_addr_bit (gdbarch, 32); + set_gdbarch_short_bit (gdbarch, 16); + set_gdbarch_int_bit (gdbarch, 32); + set_gdbarch_long_bit (gdbarch, 32); + set_gdbarch_long_long_bit (gdbarch, 64); + set_gdbarch_float_bit (gdbarch, 32); + set_gdbarch_double_bit (gdbarch, 64); + + set_gdbarch_float_format (gdbarch, floatformats_ieee_single); + set_gdbarch_double_format (gdbarch, floatformats_ieee_double); + + /* The register set. */ + set_gdbarch_num_regs (gdbarch, NIOS2_NUM_REGS); + set_gdbarch_sp_regnum (gdbarch, NIOS2_SP_REGNUM); + set_gdbarch_pc_regnum (gdbarch, NIOS2_PC_REGNUM); /* Pseudo register PC */ + + set_gdbarch_register_name (gdbarch, nios2_register_name); + set_gdbarch_register_type (gdbarch, nios2_register_type); + + /* Provide register mappings for stabs and dwarf2. */ + set_gdbarch_stab_reg_to_regnum (gdbarch, nios2_dwarf_reg_to_regnum); + set_gdbarch_dwarf2_reg_to_regnum (gdbarch, nios2_dwarf_reg_to_regnum); + + set_gdbarch_inner_than (gdbarch, core_addr_lessthan); + + /* Call dummy code. */ + set_gdbarch_frame_align (gdbarch, nios2_frame_align); + + set_gdbarch_return_value (gdbarch, nios2_return_value); + + set_gdbarch_skip_prologue (gdbarch, nios2_skip_prologue); + set_gdbarch_in_function_epilogue_p (gdbarch, nios2_in_function_epilogue_p); + set_gdbarch_breakpoint_from_pc (gdbarch, nios2_breakpoint_from_pc); + + set_gdbarch_dummy_id (gdbarch, nios2_dummy_id); + set_gdbarch_unwind_pc (gdbarch, nios2_unwind_pc); + set_gdbarch_unwind_sp (gdbarch, nios2_unwind_sp); + + /* The dwarf2 unwinder will normally produce the best results if + the debug information is available, so register it first. */ + dwarf2_append_unwinders (gdbarch); + frame_unwind_append_unwinder (gdbarch, &nios2_stub_frame_unwind); + frame_unwind_append_unwinder (gdbarch, &nios2_frame_unwind); + + /* Single stepping. */ + set_gdbarch_software_single_step (gdbarch, nios2_software_single_step); + + /* Hook in ABI-specific overrides, if they have been registered. */ + gdbarch_init_osabi (info, gdbarch); + + if (tdep->jb_pc >= 0) + set_gdbarch_get_longjmp_target (gdbarch, nios2_get_longjmp_target); + + frame_base_set_default (gdbarch, &nios2_frame_base); + + set_gdbarch_print_insn (gdbarch, nios2_print_insn); + + /* Enable inferior call support. */ + set_gdbarch_push_dummy_call (gdbarch, nios2_push_dummy_call); + + if (tdesc_data) + tdesc_use_registers (gdbarch, tdesc, tdesc_data); + + return gdbarch; +} + +extern initialize_file_ftype _initialize_nios2_tdep; /* -Wmissing-prototypes */ + +void +_initialize_nios2_tdep (void) +{ + gdbarch_register (bfd_arch_nios2, nios2_gdbarch_init, NULL); + initialize_tdesc_nios2 (); + + /* Allow debugging this file's internals. */ + add_setshow_boolean_cmd ("nios2", class_maintenance, &nios2_debug, + _("Set Nios II debugging."), + _("Show Nios II debugging."), + _("When on, Nios II specific debugging is enabled."), + NULL, + NULL, + &setdebuglist, &showdebuglist); +} diff --git a/gdb/nios2-tdep.h b/gdb/nios2-tdep.h new file mode 100644 index 00000000000..5346b9a41c6 --- /dev/null +++ b/gdb/nios2-tdep.h @@ -0,0 +1,80 @@ +/* Target-dependent header for the Nios II architecture, for GDB. + Copyright (C) 2012-2013 Free Software Foundation, Inc. + Contributed by Mentor Graphics, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifndef NIOS2_TDEP_H +#define NIOS2_TDEP_H + +/* Registers. */ +#define NIOS2_Z_REGNUM 0 /* Zero */ +#define NIOS2_R2_REGNUM 2 /* used for return value */ +#define NIOS2_R3_REGNUM 3 /* used for return value */ +/* Used for hidden zero argument to store ptr to struct return value. */ +#define NIOS2_R4_REGNUM 4 +#define NIOS2_R7_REGNUM 7 +#define NIOS2_GP_REGNUM 26 /* Global Pointer */ +#define NIOS2_SP_REGNUM 27 /* Stack Pointer */ +#define NIOS2_FP_REGNUM 28 /* Frame Pointer */ +#define NIOS2_EA_REGNUM 29 /* Exception address */ +#define NIOS2_BA_REGNUM 30 /* Breakpoint return address */ +#define NIOS2_RA_REGNUM 31 /* Return address */ +#define NIOS2_PC_REGNUM 32 + +/* Control registers. */ +#define NIOS2_STATUS_REGNUM 33 +#define NIOS2_ESTATUS_REGNUM 34 +#define NIOS2_BSTATUS_REGNUM 35 +#define NIOS2_IENABLE_REGNUM 36 +#define NIOS2_IPENDING_REGNUM 37 +#define NIOS2_CPUID_REGNUM 38 +#define NIOS2_EXCEPTION_REGNUM 40 +#define NIOS2_PTEADDR_REGNUM 41 +#define NIOS2_TLBACC_REGNUM 42 +#define NIOS2_TLBMISC_REGNUM 43 +#define NIOS2_ECCINJ_REGNUM 44 +#define NIOS2_BADADDR_REGNUM 45 +#define NIOS2_CONFIG_REGNUM 46 +#define NIOS2_MPUBASE_REGNUM 47 +#define NIOS2_MPUACC_REGNUM 48 + +/* R4-R7 are used for argument passing. */ +#define NIOS2_FIRST_ARGREG NIOS2_R4_REGNUM +#define NIOS2_LAST_ARGREG NIOS2_R7_REGNUM + +/* Number of all registers. */ +#define NIOS2_NUM_REGS 49 + +/* Size of an instruction, in bytes. */ +#define NIOS2_OPCODE_SIZE 4 + +/* Target-dependent structure in gdbarch. */ +struct gdbarch_tdep +{ + /* Assumes FRAME is stopped at a syscall (trap) instruction; returns + the expected next PC. */ + CORE_ADDR (*syscall_next_pc) (struct frame_info *frame); + + /* Offset to PC value in jump buffer. + If this is negative, longjmp support will be disabled. */ + int jb_pc; +}; + +extern struct target_desc *tdesc_nios2_linux; +extern struct target_desc *tdesc_nios2; + +#endif /* NIOS2_TDEP_H */ diff --git a/gdb/regformats/nios2-linux.dat b/gdb/regformats/nios2-linux.dat new file mode 100644 index 00000000000..0b89d53d2d1 --- /dev/null +++ b/gdb/regformats/nios2-linux.dat @@ -0,0 +1,53 @@ +# DO NOT EDIT: generated from nios2-linux.xml +name:nios2_linux +xmltarget:nios2-linux.xml +expedite:sp,pc +32:zero +32:at +32:r2 +32:r3 +32:r4 +32:r5 +32:r6 +32:r7 +32:r8 +32:r9 +32:r10 +32:r11 +32:r12 +32:r13 +32:r14 +32:r15 +32:r16 +32:r17 +32:r18 +32:r19 +32:r20 +32:r21 +32:r22 +32:r23 +32:et +32:bt +32:gp +32:sp +32:fp +32:ea +32:ba +32:ra +32:pc +32:status +32:estatus +32:bstatus +32:ienable +32:ipending +32:cpuid +32:ctl6 +32:exception +32:pteaddr +32:tlbacc +32:tlbmisc +32:eccinj +32:badaddr +32:config +32:mpubase +32:mpuacc