From: Stephane Carrez Date: Sat, 21 Jul 2001 19:56:54 +0000 (+0000) Subject: * tuiIO.h: Remove old declarations and add the new ones. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a198b876bbcb;p=binutils-gdb.git * tuiIO.h: Remove old declarations and add the new ones. * tuiIO.c: New management for curses and gdb terminal interactions. (tui_tputs): Remove. (tuiTermSetup, tuiTermUnsetup): Remove, must use normal curses ops. (tuiBufferGetc, tui_vStartNewLines, _updateCommandInfo): Remove. (tui_owns_terminal): Remove. (tui_redisplay_readline): New function. (tui_puts): New function. (tui_prep_terminal): New function. (tui_deprep_terminal): New function. (tui_getc): Rename of tuiGetc, simplify and fix. (tui_setup_io): New function. (tui_initialize_io): New function. --- diff --git a/gdb/tui/ChangeLog b/gdb/tui/ChangeLog index 153b09c3dd6..21423da5634 100644 --- a/gdb/tui/ChangeLog +++ b/gdb/tui/ChangeLog @@ -1,3 +1,19 @@ +2001-07-21 Stephane Carrez + + * tuiIO.h: Remove old declarations and add the new ones. + * tuiIO.c: New management for curses and gdb terminal interactions. + (tui_tputs): Remove. + (tuiTermSetup, tuiTermUnsetup): Remove, must use normal curses ops. + (tuiBufferGetc, tui_vStartNewLines, _updateCommandInfo): Remove. + (tui_owns_terminal): Remove. + (tui_redisplay_readline): New function. + (tui_puts): New function. + (tui_prep_terminal): New function. + (tui_deprep_terminal): New function. + (tui_getc): Rename of tuiGetc, simplify and fix. + (tui_setup_io): New function. + (tui_initialize_io): New function. + 2001-07-21 Stephane Carrez * tuiRegs.c (tuiDisplayRegistersFrom): Call touchwin. diff --git a/gdb/tui/tuiIO.c b/gdb/tui/tuiIO.c index 138eec520a2..c4d43a63a12 100644 --- a/gdb/tui/tuiIO.c +++ b/gdb/tui/tuiIO.c @@ -22,618 +22,383 @@ #include #include "defs.h" #include "terminal.h" +#include "target.h" +#include "event-loop.h" +#include "command.h" +#include "top.h" +#include "readline/readline.h" #include "tui.h" #include "tuiData.h" #include "tuiIO.h" #include "tuiCommand.h" #include "tuiWin.h" +#include "tuiGeneralWin.h" +#include "tui-file.h" +#include "ui-out.h" +#include "cli-out.h" +#include + +/* This file controls the IO interactions between gdb and curses. + When the TUI is enabled, gdb has two modes a curses and a standard + mode. + + In curses mode, the gdb outputs are made in a curses command window. + For this, the gdb_stdout and gdb_stderr are redirected to the specific + ui_file implemented by TUI. The output is handled by tui_puts(). + The input is also controlled by curses with tui_getc(). The readline + library uses this function to get its input. Several readline hooks + are installed to redirect readline output to the TUI (see also the + note below). + + In normal mode, the gdb outputs are restored to their origin, that + is as if TUI is not used. Readline also uses its original getc() + function with stdin. + + Note: the current readline is not clean in its management of the output. + Even if we install a redisplay handler, it sometimes writes on a stdout + file. It is important to redirect every output produced by readline, + otherwise the curses window will be garbled. This is implemented with + a pipe that TUI reads and readline writes to. A gdb input handler + is created so that reading the pipe is handled automatically. + This will probably not work on non-Unix platforms. The best fix is + to make readline clean enougth so that is never write on stdout. */ + +/* TUI output files. */ +static struct ui_file *tui_stdout; +static struct ui_file *tui_stderr; +static struct ui_out *tui_out; + +/* GDB output files in non-curses mode. */ +static struct ui_file *tui_old_stdout; +static struct ui_file *tui_old_stderr; +static struct ui_out *tui_old_uiout; + +/* Readline previous hooks. */ +static Function *tui_old_rl_getc_function; +static VFunction *tui_old_rl_redisplay_function; +static VFunction *tui_old_rl_prep_terminal; +static VFunction *tui_old_rl_deprep_terminal; +static int tui_old_readline_echoing_p; + +/* Readline output stream. + Should be removed when readline is clean. */ +static FILE *tui_rl_outstream; +static FILE *tui_old_rl_outstream; +static int tui_readline_pipe[2]; -#include - -/* The Solaris header files seem to provide no declaration for this at - all when __STDC__ is defined. This shouldn't conflict with - anything. */ -extern char *tgoto (); - -int insert_mode = 0; - -/******************************************** -** LOCAL STATIC FORWARD DECLS ** -********************************************/ -static void _updateCommandInfo (int); static unsigned int _tuiHandleResizeDuringIO (unsigned int); -/********************************************************************************* -** PUBLIC FUNCTIONS ** -*********************************************************************************/ - -/* - ** tuiPuts_unfiltered(). - ** Function to put a string to the command window - ** When running in TUI mode, this is the "hook" - ** for fputs_unfiltered(). That is, all debugger - ** output eventually makes it's way to the bottom-level - ** routine fputs_unfiltered (main.c), which (in TUI - ** mode), calls tuiPuts_unfiltered(). - */ +/* Print the string in the curses command window. */ void -tuiPuts_unfiltered (const char *string, struct ui_file * stream) +tui_puts (const char *string) { - int len = strlen (string); - int i, linech; + static int tui_skip_line = -1; + char c; + WINDOW *w; - for (i = 0; i < len; i++) + w = cmdWin->generic.handle; + while ((c = *string++) != 0) { - if (string[i] == '\n' || string[i] == '\r') - m_tuiStartNewLine; + /* Catch annotation and discard them. We need two \032 and + discard until a \n is seen. */ + if (c == '\032') + { + tui_skip_line++; + } + else if (tui_skip_line != 1) + { + tui_skip_line = -1; + waddch (w, c); + } + else if (c == '\n') + tui_skip_line = -1; + } + getyx (w, cmdWin->detail.commandInfo.curLine, + cmdWin->detail.commandInfo.curch); + + /* We could defer the following. */ + wrefresh (w); + fflush (stdout); +} + +/* Readline callback. + Redisplay the command line with its prompt after readline has + changed the edited text. */ +static void +tui_redisplay_readline (void) +{ + int prev_col; + int height; + int col, line; + int c_pos; + int c_line; + int in; + WINDOW *w; + char *prompt; + int start_line; + + prompt = get_prompt (); + + c_pos = -1; + c_line = -1; + w = cmdWin->generic.handle; + start_line = cmdWin->detail.commandInfo.curLine; + wmove (w, start_line, 0); + prev_col = 0; + height = 1; + for (in = 0; prompt && prompt[in]; in++) + { + waddch (w, prompt[in]); + getyx (w, line, col); + if (col < prev_col) + height++; + prev_col = col; + } + for (in = 0; in < rl_end; in++) + { + unsigned char c; + + c = (unsigned char) rl_line_buffer[in]; + if (in == rl_point) + { + getyx (w, c_line, c_pos); + } + + if (CTRL_CHAR (c) || c == RUBOUT) + { + waddch (w, '^'); + waddch (w, CTRL_CHAR (c) ? UNCTRL (c) : '?'); + } else { - if ((cmdWin->detail.commandInfo.curch + 1) > cmdWin->generic.width) - m_tuiStartNewLine; - - if (insert_mode) - { - mvwinsch (cmdWin->generic.handle, - cmdWin->detail.commandInfo.curLine, - cmdWin->detail.commandInfo.curch++, - string[i]); - wmove (cmdWin->generic.handle, - cmdWin->detail.commandInfo.curLine, - cmdWin->detail.commandInfo.curch); - } - else - mvwaddch (cmdWin->generic.handle, - cmdWin->detail.commandInfo.curLine, - cmdWin->detail.commandInfo.curch++, - string[i]); + waddch (w, c); } + if (c == '\n') + { + getyx (w, cmdWin->detail.commandInfo.curLine, + cmdWin->detail.commandInfo.curch); + } + getyx (w, line, col); + if (col < prev_col) + height++; + prev_col = col; } - tuiRefreshWin (&cmdWin->generic); - - return; -} /* tuiPuts_unfiltered */ - -/* A cover routine for tputs(). - * tputs() is called from the readline package to put - * out strings representing cursor positioning. - * In TUI mode (non-XDB-style), tui_tputs() is called instead. - * - * The reason we need to hook tputs() is: - * Since the output is going to curses and not to - * a raw terminal, we need to intercept these special - * sequences, and handle them them here. - * - * This function seems to be correctly handling all sequences - * aimed at hpterm's, but there is additional work to do - * for xterm's and dtterm's. I abandoned further work on this - * in favor of "XDB style". In "XDB style", the command region - * looks like terminal, not a curses window, and this routine - * is not called. - RT - */ -void -tui_tputs (str, affcnt, putfunc) - char *str; - int affcnt; - int (*putfunc) (int); + wclrtobot (w); + getyx (w, cmdWin->detail.commandInfo.curLine, + cmdWin->detail.commandInfo.curch); + if (c_line >= 0) + wmove (w, c_line, c_pos); + + cmdWin->detail.commandInfo.curLine -= height - 1; + + wrefresh (w); + fflush(stdout); +} + +/* Readline callback to prepare the terminal. It is called once + each time we enter readline. There is nothing to do in curses mode. */ +static void +tui_prep_terminal (void) { - extern char *rl_prompt; /* the prompt string */ - - /* This set of globals are defined and initialized - * by the readline package. - * - * Note we're assuming tui_tputs() is being called - * by the readline package. That's because we're recognizing - * that a given string is being passed by - * matching the string address against readline's - * term_ global. To make this more general, - * we'd have to actually recognize the termcap sequence - * inside the string (more work than I want to do). - RT - * - * We don't see or need to handle every one of these here; - * this is just the full list defined in readline/readline.c - */ - extern char *term_backspace; - extern char *term_clreol; - extern char *term_clrpag; - extern char *term_cr; - extern char *term_dc; - extern char *term_ei; - extern char *term_goto; - extern char *term_ic; - extern char *term_im; - extern char *term_mm; - extern char *term_mo; - extern char *term_up; - extern char *term_scroll_region; - extern char *term_memory_lock; - extern char *term_memory_unlock; - extern char *term_cursor_move; - extern char *visible_bell; - - /* Sanity check - if not TUI, just call tputs() */ - if (!tui_version) - tputs (str, affcnt, putfunc); - - /* The strings we special-case are handled first */ - - if (str == term_backspace) - { - /* Backspace. */ +} - /* We see this on an emacs control-B. - * I.e., it's like the left-arrow key (not like the backspace key). - * The effect that readline wants when it transmits this - * character to us is simply to back up one character - * (but not to write a space over the old character). - */ +/* Readline callback to restore the terminal. It is called once + each time we leave readline. There is nothing to do in curses mode. */ +static void +tui_deprep_terminal (void) +{ +} - _updateCommandInfo (-1); - wmove (cmdWin->generic.handle, - cmdWin->detail.commandInfo.curLine, - cmdWin->detail.commandInfo.curch); - wrefresh (cmdWin->generic.handle); +/* Read readline output pipe and feed the command window with it. + Should be removed when readline is clean. */ +static void +tui_readline_output (int code, gdb_client_data data) +{ + int size; + char buf[256]; - } - else if (str == term_clreol) + size = read (tui_readline_pipe[0], buf, sizeof (buf) - 1); + if (size > 0 && tui_active) { - - /* Clear to end of line. */ - wclrtoeol (cmdWin->generic.handle); - wrefresh (cmdWin->generic.handle); - + buf[size] = 0; + tui_puts (buf); } - else if (str == term_cr) +} + +/* Setup the IO for curses or non-curses mode. + - In non-curses mode, readline and gdb use the standard input and + standard output/error directly. + - In curses mode, the standard output/error is controlled by TUI + with the tui_stdout and tui_stderr. The output is redirected in + the curses command window. Several readline callbacks are installed + so that readline asks for its input to the curses command window + with wgetch(). */ +void +tui_setup_io (int mode) +{ + extern int readline_echoing_p; + + if (mode) { - - /* Carriage return */ - _updateCommandInfo (-cmdWin->detail.commandInfo.curch); - wmove (cmdWin->generic.handle, - cmdWin->detail.commandInfo.curLine, - 0 /* readline will rewrite the prompt from 0 */ ); - wrefresh (cmdWin->generic.handle); - + /* Redirect readline to TUI. */ + tui_old_rl_redisplay_function = rl_redisplay_function; + tui_old_rl_deprep_terminal = rl_deprep_term_function; + tui_old_rl_prep_terminal = rl_prep_term_function; + tui_old_rl_getc_function = rl_getc_function; + tui_old_rl_outstream = rl_outstream; + tui_old_readline_echoing_p = readline_echoing_p; + rl_redisplay_function = tui_redisplay_readline; + rl_deprep_term_function = tui_deprep_terminal; + rl_prep_term_function = tui_prep_terminal; + rl_getc_function = tui_getc; + readline_echoing_p = 0; + rl_outstream = tui_rl_outstream; + rl_prompt = 0; + + /* Keep track of previous gdb output. */ + tui_old_stdout = gdb_stdout; + tui_old_stderr = gdb_stderr; + tui_old_uiout = uiout; + + /* Reconfigure gdb output. */ + gdb_stdout = tui_stdout; + gdb_stderr = tui_stderr; + gdb_stdlog = gdb_stdout; /* for moment */ + gdb_stdtarg = gdb_stderr; /* for moment */ + uiout = tui_out; } - else if (str == term_goto) + else { - - /* This is actually a tgoto() specifying a character position, - * followed by either a term_IC/term_DC which [I think] means - * insert/delete one character at that position. - * There are complications with this one - need to either - * extract the position from the string, or have a backdoor - * means of communicating it from ../readline/display.c. - * So this one is not yet implemented. - * Not doing it seems to have no ill effects on command-line-editing - * that I've noticed so far. - RT - */ - + /* Restore gdb output. */ + gdb_stdout = tui_old_stdout; + gdb_stderr = tui_old_stderr; + gdb_stdlog = gdb_stdout; /* for moment */ + gdb_stdtarg = gdb_stderr; /* for moment */ + uiout = tui_old_uiout; + + /* Restore readline. */ + rl_redisplay_function = tui_old_rl_redisplay_function; + rl_deprep_term_function = tui_old_rl_deprep_terminal; + rl_prep_term_function = tui_old_rl_prep_terminal; + rl_getc_function = tui_old_rl_getc_function; + rl_outstream = tui_old_rl_outstream; + readline_echoing_p = tui_old_readline_echoing_p; } - else if (str == term_dc) - { - - /* Delete character at current cursor position */ - wdelch (cmdWin->generic.handle); - wrefresh (cmdWin->generic.handle); +} - } - else if (str == term_im) +/* Initialize the IO for gdb in curses mode. */ +void +tui_initialize_io () +{ + /* Create tui output streams. */ + tui_stdout = tui_fileopen (stdout); + tui_stderr = tui_fileopen (stderr); + tui_out = tui_out_new (tui_stdout); + + /* Create the default UI. It is not created because we installed + a init_ui_hook. */ + uiout = cli_out_new (gdb_stdout); + + /* Temporary solution for readline writing to stdout: + redirect readline output in a pipe, read that pipe and + output the content in the curses command window. */ + if (pipe (tui_readline_pipe) != 0) { - - /* Turn on insert mode. */ - insert_mode = 1; - + fprintf_unfiltered (gdb_stderr, "Cannot create pipe for readline"); + exit (1); } - else if (str == term_ei) + tui_rl_outstream = fdopen (tui_readline_pipe[1], "w"); + if (tui_rl_outstream == 0) { - - /* Turn off insert mode. */ - insert_mode = 0; - - /* Strings we know about but don't handle - * specially here are just passed along to tputs(). - * - * These are not handled because (as far as I can tell) - * they are not actually emitted by the readline package - * in the course of doing command-line editing. Some of them - * theoretically could be used in the future, in which case we'd - * need to handle them. - */ + fprintf_unfiltered (gdb_stderr, "Cannot redirect readline output"); + exit (1); } - else if (str == term_ic || /* insert character */ - str == term_cursor_move || /* cursor move */ - str == term_clrpag || /* clear page */ - str == term_mm || /* turn on meta key */ - str == term_mo || /* turn off meta key */ - str == term_up || /* up one line (not expected) */ - str == term_scroll_region || /* set scroll region */ - str == term_memory_lock || /* lock screen above cursor */ - str == term_memory_unlock || /* unlock screen above cursor */ - str == visible_bell) - { /* flash screen */ - tputs (str, affcnt, putfunc); - } - else - { /* something else */ - tputs (str, affcnt, putfunc); - } -} /* tui_tputs */ - + setlinebuf (tui_rl_outstream); -/* - ** tui_vwgetch() - ** Wrapper around wgetch with the window in a va_list - */ -unsigned int -tui_vwgetch (va_list args) -{ - unsigned int ch; - WINDOW *window; - - window = va_arg (args, WINDOW *); - - return ((unsigned int) wgetch (window)); -} /* tui_vwgetch */ - - -/* - ** tuiGetc(). - ** Get a character from the command window. - ** This is called from the readline package, - ** that is, we have: - ** tuiGetc() [here], called from - ** readline code [in ../readline/], called from - ** command_line_input() in top.c - */ -unsigned int -tuiGetc (void) -{ - unsigned int ch; - extern char *rl_prompt; - extern char *rl_line_buffer; - extern int rl_point; - - /* Call the curses routine that reads one character */ -#ifndef COMMENT - ch = (unsigned int) vcatch_errors ((OpaqueFuncPtr) tui_vwgetch, - cmdWin->generic.handle); +#ifdef O_NONBLOCK + (void) fcntl (tui_readline_pipe[0], F_SETFL, O_NONBLOCK); #else - ch = wgetch (cmdWin->generic.handle); +#ifdef O_NDELAY + (void) fcntl (tui_readline_pipe[0], F_SETFL, O_NDELAY); #endif +#endif + + add_file_handler (tui_readline_pipe[0], tui_readline_output, 0); +} + +/* Get a character from the command window. This is called from the readline + package. */ +int +tui_getc (FILE *fp) +{ + int ch; + WINDOW *w; + + w = cmdWin->generic.handle; + + /* Flush readline output. */ + tui_readline_output (GDB_READABLE, 0); + + ch = wgetch (w); ch = _tuiHandleResizeDuringIO (ch); + /* The \n must be echoed because it will not be printed by readline. */ + if (ch == '\n') + { + /* When hitting return with an empty input, gdb executes the last + command. If we emit a newline, this fills up the command window + with empty lines with gdb prompt at beginning. Instead of that, + stay on the same line but provide a visual effect to show the + user we recognized the command. */ + if (rl_end == 0) + { + wmove (w, cmdWin->detail.commandInfo.curLine, 0); + + /* Clear the line. This will blink the gdb prompt since + it will be redrawn at the same line. */ + wclrtoeol (w); + wrefresh (w); + napms (20); + } + else + { + wmove (w, cmdWin->detail.commandInfo.curLine, + cmdWin->detail.commandInfo.curch); + waddch (w, ch); + } + } + if (m_isCommandChar (ch)) { /* Handle prev/next/up/down here */ - tuiTermSetup (0); ch = tuiDispatchCtrlChar (ch); - cmdWin->detail.commandInfo.curch = strlen (rl_prompt) + rl_point; - tuiTermUnsetup (0, cmdWin->detail.commandInfo.curch); } + if (ch == '\n' || ch == '\r' || ch == '\f') cmdWin->detail.commandInfo.curch = 0; +#if 0 else tuiIncrCommandCharCountBy (1); - +#endif + if (ch == KEY_BACKSPACE) + return '\b'; + return ch; -} /* tuiGetc */ - - -/* - ** tuiBufferGetc(). - */ -/*elz: this function reads a line of input from the user and - puts it in a static buffer. Subsequent calls to this same function - obtain one char at the time, providing the caller with a behavior - similar to fgetc. When the input is buffered, the backspaces have - the needed effect, i.e. ignore the last char active in the buffer */ -/* so far this function is called only from the query function in - utils.c */ - -unsigned int -tuiBufferGetc (void) -{ - unsigned int ch; - static unsigned char _ibuffer[512]; - static int index_read = -1; - static int length_of_answer = -1; - int pos = 0; - - if (length_of_answer == -1) - { - /* this is the first time through, need to read the answer */ - do - { - /* Call the curses routine that reads one character */ - ch = (unsigned int) wgetch (cmdWin->generic.handle); - if (ch != '\b') - { - _ibuffer[pos] = ch; - pos++; - } - else - pos--; - } - while (ch != '\r' && ch != '\n'); - - length_of_answer = pos; - index_read = 0; - } +} - ch = _ibuffer[index_read]; - index_read++; - if (index_read == length_of_answer) - { - /*this is the last time through, reset for next query */ - index_read = -1; - length_of_answer = -1; - } - - wrefresh (cmdWin->generic.handle); - - return (ch); -} /* tuiBufferGetc */ - - -/* - ** tuiStartNewLines(). - */ -void -tuiStartNewLines (int numLines) -{ - if (numLines > 0) - { - if (cmdWin->generic.viewportHeight > 1 && - cmdWin->detail.commandInfo.curLine < cmdWin->generic.viewportHeight) - cmdWin->detail.commandInfo.curLine += numLines; - else - scroll (cmdWin->generic.handle); - cmdWin->detail.commandInfo.curch = 0; - wmove (cmdWin->generic.handle, - cmdWin->detail.commandInfo.curLine, - cmdWin->detail.commandInfo.curch); - tuiRefreshWin (&cmdWin->generic); - } - - return; -} /* tuiStartNewLines */ - - -/* - ** tui_vStartNewLines(). - ** With numLines in a va_list - */ -void -tui_vStartNewLines (va_list args) -{ - int numLines = va_arg (args, int); - - tuiStartNewLines (numLines); - - return; -} /* tui_vStartNewLines */ - - -/**************************************************************************** -** LOCAL STATIC FUNCTIONS ** -*****************************************************************************/ - - -/* - ** _tuiHandleResizeDuringIO - ** This function manages the cleanup when a resize has occured - ** From within a call to getch() or read. Returns the character - ** to return from getc or read. - */ +/* Cleanup when a resize has occured. + Returns the character that must be processed. */ static unsigned int _tuiHandleResizeDuringIO (unsigned int originalCh) - /* the char just read */ { if (tuiWinResized ()) { tuiRefreshAll (); dont_repeat (); tuiSetWinResizedTo (FALSE); - rl_reset (); return '\n'; } else return originalCh; -} /* _tuiHandleResizeDuringIO */ - - -/* - ** _updateCommandInfo(). - ** Function to update the command window information. - */ -static void -_updateCommandInfo (int sizeOfString) -{ - - if ((sizeOfString + - cmdWin->detail.commandInfo.curch) > cmdWin->generic.width) - { - int newCurch = sizeOfString + cmdWin->detail.commandInfo.curch; - - tuiStartNewLines (1); - cmdWin->detail.commandInfo.curch = newCurch - cmdWin->generic.width; - } - else - cmdWin->detail.commandInfo.curch += sizeOfString; - - return; -} /* _updateCommandInfo */ - - -/* Looked at in main.c, fputs_unfiltered(), to decide - * if it's safe to do standard output to the command window. - */ -int tui_owns_terminal = 0; - -/* Called to set up the terminal for TUI (curses) I/O. - * We do this either on our way "in" to GDB after target - * program execution, or else within tuiDo just before - * going off to TUI routines. - */ - -void -tuiTermSetup (int turn_off_echo) -{ - char *buffer; - int start; - int end; - int endcol; - extern char *term_scroll_region; - extern char *term_cursor_move; - extern char *term_memory_lock; - extern char *term_memory_unlock; - - /* Turn off echoing, since the TUI does not - * expect echoing. Below I only put in the TERMIOS - * case, since that is what applies on HP-UX. turn_off_echo - * is 1 except for the case where we're being called - * on a "quit", in which case we want to leave echo on. - */ - if (turn_off_echo) - { -#ifdef HAVE_TERMIOS - struct termios tio; - tcgetattr (0, &tio); - tio.c_lflag &= ~(ECHO); - tcsetattr (0, TCSANOW, &tio); -#endif - } - - /* Compute the start and end lines of the command - * region. (Actually we only use end here) - */ - start = winList[CMD_WIN]->generic.origin.y; - end = start + winList[CMD_WIN]->generic.height - 1; - endcol = winList[CMD_WIN]->generic.width - 1; - - if (term_memory_unlock) - { - - /* Un-do the effect of the memory lock in terminal_inferior() */ - tputs (term_memory_unlock, 1, (int (*) (int)) putchar); - fflush (stdout); - - } - else if (term_scroll_region) - { - - /* Un-do the effect of setting scroll region in terminal_inferior() */ - /* I'm actually not sure how to do this (we don't know for - * sure what the scroll region was *before* we changed it), - * but I'll guess that setting it to the whole screen is - * the right thing. So, ... - */ - - /* Set scroll region to be 0..end */ - buffer = (char *) tgoto (term_scroll_region, end, 0); - tputs (buffer, 1, (int (*) (int)) putchar); - - } /* else we're out of luck */ - - /* This is an attempt to keep the logical & physical - * cursor in synch, going into curses. Without this, - * curses seems to be confused by the fact that - * GDB has physically moved the curser on it. One - * visible effect of removing this code is that the - * locator window fails to get updated and the line - * of text that *should* go into the locator window - * often goes to the wrong place. - */ - /* What's done here is to tell curses to write a ' ' - * at the bottom right corner of the screen. - * The idea is to wind up with the cursor in a known - * place. - * Note I'm relying on refresh() - * only writing what changed (the space), - * not the whole screen. - */ - standend (); - move (end, endcol - 1); - addch (' '); - refresh (); - - tui_owns_terminal = 1; -} /* tuiTermSetup */ - - -/* Called to set up the terminal for target program I/O, meaning I/O - * is confined to the command-window area. We also call this on our - * way out of tuiDo, thus setting up the terminal this way for - * debugger command I/O. */ -void -tuiTermUnsetup (int turn_on_echo, int to_column) -{ - int start; - int end; - int curline; - char *buffer; - /* The next bunch of things are from readline */ - extern char *term_scroll_region; - extern char *term_cursor_move; - extern char *term_memory_lock; - extern char *term_memory_unlock; - extern char *term_se; - - /* We need to turn on echoing, since the TUI turns it off */ - /* Below I only put in the TERMIOS case, since that - * is what applies on HP-UX. - */ - if (turn_on_echo) - { -#ifdef HAVE_TERMIOS - struct termios tio; - tcgetattr (0, &tio); - tio.c_lflag |= (ECHO); - tcsetattr (0, TCSANOW, &tio); -#endif - } - - /* Compute the start and end lines of the command - * region, as well as the last "real" line of - * the region (normally same as end, except when - * we're first populating the region) - */ - start = winList[CMD_WIN]->generic.origin.y; - end = start + winList[CMD_WIN]->generic.height - 1; - curline = start + winList[CMD_WIN]->detail.commandInfo.curLine; - - /* We want to confine target I/O to the command region. - * In order to do so, we must either have "memory lock" - * (hpterm's) or "scroll regions" (xterm's). - */ - if (term_cursor_move && term_memory_lock) - { - - /* Memory lock means lock region above cursor. - * So first position the cursor, then call memory lock. - */ - buffer = tgoto (term_cursor_move, 0, start); - tputs (buffer, 1, (int (*) (int)) putchar); - tputs (term_memory_lock, 1, (int (*) (int)) putchar); - - } - else if (term_scroll_region) - { - - /* Set the scroll region to the command window */ - buffer = tgoto (term_scroll_region, end, start); - tputs (buffer, 1, (int (*) (int)) putchar); - - } /* else we can't do anything about target I/O */ - - /* Also turn off standout mode, in case it is on */ - if (term_se != NULL) - tputs (term_se, 1, (int (*) (int)) putchar); - - /* Now go to the appropriate spot on the end line */ - buffer = tgoto (term_cursor_move, to_column, end); - tputs (buffer, 1, (int (*) (int)) putchar); - fflush (stdout); - - tui_owns_terminal = 0; -} /* tuiTermUnsetup */ +} diff --git a/gdb/tui/tuiIO.h b/gdb/tui/tuiIO.h index 303867c0a6a..2ad92ce81f1 100644 --- a/gdb/tui/tuiIO.h +++ b/gdb/tui/tuiIO.h @@ -24,16 +24,17 @@ #include -extern void tuiPuts_unfiltered (const char *, struct ui_file *); -extern unsigned int tuiGetc (void); -extern unsigned int tuiBufferGetc (void); -extern int tuiRead (int, char *, int); -extern void tuiStartNewLines (int); -extern void tui_vStartNewLines (va_list); -extern unsigned int tui_vwgetch (va_list); -extern void tuiTermSetup (int); -extern void tuiTermUnsetup (int, int); +/* Print the string in the curses command window. */ +extern void tui_puts (const char *); +/* Setup the IO for curses or non-curses mode. */ +extern void tui_setup_io (int mode); + +/* Initialize the IO for gdb in curses mode. */ +extern void tui_initialize_io (void); + +/* Get a character from the command window. */ +extern int tui_getc (FILE*); #define m_tuiStartNewLine tuiStartNewLines(1) @@ -58,4 +59,4 @@ extern void tuiTermUnsetup (int, int); #endif -/*_TUI_IO_H*/ +