From: George Sapountzis Date: Sun, 28 Mar 2010 16:30:03 +0000 (+0300) Subject: drisw: probably better hack for stride and some comments X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a24fc90703f62d286031cb2ee8f625ef728243fd;p=mesa.git drisw: probably better hack for stride and some comments --- diff --git a/src/gallium/state_trackers/dri/sw/drisw.c b/src/gallium/state_trackers/dri/sw/drisw.c index a75fdf17899..b7eba63bcb9 100644 --- a/src/gallium/state_trackers/dri/sw/drisw.c +++ b/src/gallium/state_trackers/dri/sw/drisw.c @@ -48,8 +48,13 @@ * for createImage/destroyImage similar to DRI2 getBuffers. Probably not worth * it, given the scope of DRISW, unless it falls naturally from properly * solving the other issues. + * + * fences: + * + * No fences are used, are they needed for llvmpipe / cell ? */ +#include "util/u_format.h" #include "util/u_memory.h" #include "util/u_inlines.h" #include "pipe/p_context.h" @@ -75,14 +80,19 @@ get_drawable_info(__DRIdrawable *dPriv, int *w, int *h) dPriv->loaderPrivate); } +/* + * Set the width to 'stride / cpp'. PutImage seems to correctly clip the width + * to the actual width of the dst drawable. Even if this is not specified but + * an implementation detail, it is the correct thing to do, so rely on it. XXX + */ static INLINE void -put_image(__DRIdrawable *dPriv, void *data) +put_image(__DRIdrawable *dPriv, void *data, unsigned width) { __DRIscreen *sPriv = dPriv->driScreenPriv; const __DRIswrastLoaderExtension *loader = sPriv->swrast_loader; loader->putImage(dPriv, __DRI_SWRAST_IMAGE_OP_SWAP, - 0, 0, dPriv->w, dPriv->h, + 0, 0, width, dPriv->h, data, dPriv->loaderPrivate); } @@ -102,6 +112,7 @@ drisw_present_texture(__DRIdrawable *dPriv, struct pipe_surface *psurf; struct pipe_transfer *ptrans; void *pmap; + unsigned width; pipe = dri1_get_pipe_context(screen); psurf = dri1_get_pipe_surface(drawable, ptex); @@ -112,11 +123,13 @@ drisw_present_texture(__DRIdrawable *dPriv, PIPE_TRANSFER_READ, 0, 0, dPriv->w, dPriv->h); + width = ptrans->stride / util_format_get_blocksize(ptex->format); + pmap = pipe->transfer_map(pipe, ptrans); assert(pmap); - put_image(dPriv, pmap); + put_image(dPriv, pmap, width); pipe->transfer_unmap(pipe, ptrans); diff --git a/src/gallium/targets/dri-swrast/swrast_drm_api.c b/src/gallium/targets/dri-swrast/swrast_drm_api.c index 1fdfcccf883..1f24d7650d7 100644 --- a/src/gallium/targets/dri-swrast/swrast_drm_api.c +++ b/src/gallium/targets/dri-swrast/swrast_drm_api.c @@ -38,8 +38,8 @@ * This function should be put in targets/common or winsys/sw/common and shared * with targets/libgl-xlib and winsys/sw/drm. * - * For targets/common, you get layering violations in the build system unless - * all of drm_api's are moved under targets. + * For targets/common, you get layering violations unless all of drm_api's are + * moved under targets. */ #ifdef GALLIUM_SOFTPIPE diff --git a/src/gallium/winsys/sw/dri/dri_sw_winsys.c b/src/gallium/winsys/sw/dri/dri_sw_winsys.c index ee8ec91bc52..1c1e5612d28 100644 --- a/src/gallium/winsys/sw/dri/dri_sw_winsys.c +++ b/src/gallium/winsys/sw/dri/dri_sw_winsys.c @@ -62,15 +62,6 @@ xm_is_displaytarget_format_supported( struct sw_winsys *ws, return TRUE; } -/* see bytes_per_line in libGL */ -static INLINE int -bytes_per_line(unsigned pitch_bits, unsigned mul) -{ - unsigned mask = mul - 1; - - return ((pitch_bits + mask) & ~mask) / 8; -} - /* pipe_screen::texture_create DISPLAY_TARGET / SCANOUT / SHARED */ static struct sw_displaytarget * xm_displaytarget_create(struct sw_winsys *winsys, @@ -81,7 +72,7 @@ xm_displaytarget_create(struct sw_winsys *winsys, unsigned *stride) { struct xm_displaytarget *xm_dt; - unsigned nblocksy, size, xm_stride, loader_stride, format_stride; + unsigned nblocksy, size, xm_stride, format_stride; xm_dt = CALLOC_STRUCT(xm_displaytarget); if(!xm_dt) @@ -89,27 +80,15 @@ xm_displaytarget_create(struct sw_winsys *winsys, format_stride = util_format_get_stride(format, width); xm_stride = align(format_stride, alignment); - loader_stride = bytes_per_line(format_stride * 8, 32); nblocksy = util_format_get_nblocksy(format, height); size = xm_stride * nblocksy; -#ifdef DEBUG - debug_printf("swrast format stride: %8d\n", format_stride); - debug_printf("swrast pipe stride : %8d\n", xm_stride); - debug_printf("swrast loader stride: %8d\n", loader_stride); -#endif - - /* - * Allocate with the aligned stride required by the pipe but set the stride - * to the one hardcoded in the loaders XXX - */ - xm_dt->data = align_malloc(size, alignment); if(!xm_dt->data) goto no_data; - *stride = loader_stride; + *stride = xm_stride; return (struct sw_displaytarget *)xm_dt; no_data: diff --git a/src/glx/drisw_glx.c b/src/glx/drisw_glx.c index b5615239465..786faff81c1 100644 --- a/src/glx/drisw_glx.c +++ b/src/glx/drisw_glx.c @@ -129,10 +129,32 @@ swrastGetDrawableInfo(__DRIdrawable * draw, *h = uh; } +/** + * Align renderbuffer pitch. + * + * This should be chosen by the driver and the loader (libGL, xserver/glx) + * should use the driver provided pitch. + * + * It seems that the xorg loader (that is the xserver loading swrast_dri for + * indirect rendering, not client-side libGL) requires that the pitch is + * exactly the image width padded to 32 bits. XXX + * + * The above restriction can probably be overcome by using ScratchPixmap and + * CopyArea in the xserver, similar to ShmPutImage, and setting the width of + * the scratch pixmap to 'pitch / cpp'. + */ +static inline int +bytes_per_line(unsigned pitch_bits, unsigned mul) +{ + unsigned mask = mul - 1; + + return ((pitch_bits + mask) & ~mask) / 8; +} + static void -swrastPutImage2(__DRIdrawable * draw, int op, - int x, int y, int w, int h, - char *data, int pitch, void *loaderPrivate) +swrastPutImage(__DRIdrawable * draw, int op, + int x, int y, int w, int h, + char *data, void *loaderPrivate) { __GLXDRIdrawablePrivate *pdp = loaderPrivate; __GLXDRIdrawable *pdraw = &(pdp->base); @@ -158,7 +180,7 @@ swrastPutImage2(__DRIdrawable * draw, int op, ximage->data = data; ximage->width = w; ximage->height = h; - ximage->bytes_per_line = pitch; + ximage->bytes_per_line = bytes_per_line(w * ximage->bits_per_pixel, 32); XPutImage(dpy, drawable, gc, ximage, 0, 0, x, y, w, h); @@ -166,9 +188,9 @@ swrastPutImage2(__DRIdrawable * draw, int op, } static void -swrastGetImage2(__DRIdrawable * read, - int x, int y, int w, int h, - char *data, int pitch, void *loaderPrivate) +swrastGetImage(__DRIdrawable * read, + int x, int y, int w, int h, + char *data, void *loaderPrivate) { __GLXDRIdrawablePrivate *prp = loaderPrivate; __GLXDRIdrawable *pread = &(prp->base); @@ -182,64 +204,13 @@ swrastGetImage2(__DRIdrawable * read, ximage->data = data; ximage->width = w; ximage->height = h; - ximage->bytes_per_line = pitch; + ximage->bytes_per_line = bytes_per_line(w * ximage->bits_per_pixel, 32); XGetSubImage(dpy, readable, x, y, w, h, ~0L, ZPixmap, ximage, 0, 0); ximage->data = NULL; } -/** - * Align renderbuffer pitch. - * - * This should be chosen by the driver and the loader (libGL, xserver/glx) - * should use the driver provided pitch. - * - * It seems that the xorg loader (that is the xserver loading swrast_dri for - * indirect rendering, not client-side libGL) requires that the pitch is - * exactly the image width padded to 32 bits. XXX - * - * Is this a hard requirement that requires extra copies for different pitches - * or can the xorg loader use the driver pitch without extra copies ? - */ -static inline int -bytes_per_line(unsigned pitch_bits, unsigned mul) -{ - unsigned mask = mul - 1; - - return ((pitch_bits + mask) & ~mask) / 8; -} - -static void -swrastPutImage(__DRIdrawable * draw, int op, - int x, int y, int w, int h, - char *data, void *loaderPrivate) -{ - __GLXDRIdrawablePrivate *pdp = loaderPrivate; - int bpp, pitch; - - bpp = pdp->ximage->bits_per_pixel; - - pitch = bytes_per_line(w * bpp, 32); - - swrastPutImage2(draw, op, x, y, w, h, data, pitch, loaderPrivate); -} - -static void -swrastGetImage(__DRIdrawable * read, - int x, int y, int w, int h, - char *data, void *loaderPrivate) -{ - __GLXDRIdrawablePrivate *prp = loaderPrivate; - int bpp, pitch; - - bpp = prp->ximage->bits_per_pixel; - - pitch = bytes_per_line(w * bpp, 32); - - swrastGetImage2(read, x, y, w, h, data, pitch, loaderPrivate); -} - static const __DRIswrastLoaderExtension swrastLoaderExtension = { {__DRI_SWRAST_LOADER, __DRI_SWRAST_LOADER_VERSION}, swrastGetDrawableInfo,