From: Fred Fish <fnf@specifix.com>
Date: Wed, 26 Jun 1996 04:38:38 +0000 (+0000)
Subject: 	* lib/gdb.exp: Report timeout value for verbosity level 2.
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a26fa899a006b491e6ae07299f55685dfe394943;p=binutils-gdb.git

	* lib/gdb.exp: Report timeout value for verbosity level 2.
	* config/gdbserver.exp: Ditto.
	* config/hppro.exp: Ditto.
	* config/mips-gdb.exp: Ditto.
	* config/monitor.exp: Ditto.
	* config/netware.exp: Ditto.
	* config/sim-gdb.exp: Ditto.
	* config/slite-gdb.exp: Ditto.
	* config/udi-gdb.exp: Ditto.
	* config/unix-gdb.exp: Ditto.
	* config/vx-gdb.exp: Ditto.
	* gdb.base/a1-selftest.exp: Ditto.
	* gdb.base/a2-run.exp: Ditto.
	* gdb.base/break.exp: Ditto.
	* gdb.base/corefile.exp: Ditto.
	* gdb.base/list.exp: Ditto.
	* gdb.base/recurse.exp: Ditto.
	* gdb.base/scope.exp: Ditto.
	* gdb.base/signals.exp: Ditto.
---

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index be3122a951d..fbbc787539e 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,25 @@
+Tue Jun 25 19:59:17 1996  Fred Fish  <fnf@cygnus.com>
+
+	* lib/gdb.exp: Report timeout value for verbosity level 2.
+	* config/gdbserver.exp: Ditto.
+	* config/hppro.exp: Ditto.
+	* config/mips-gdb.exp: Ditto.
+	* config/monitor.exp: Ditto.
+	* config/netware.exp: Ditto.
+	* config/sim-gdb.exp: Ditto.
+	* config/slite-gdb.exp: Ditto.
+	* config/udi-gdb.exp: Ditto.
+	* config/unix-gdb.exp: Ditto.
+	* config/vx-gdb.exp: Ditto.
+	* gdb.base/a1-selftest.exp: Ditto.
+	* gdb.base/a2-run.exp: Ditto.
+	* gdb.base/break.exp: Ditto.
+	* gdb.base/corefile.exp: Ditto.
+	* gdb.base/list.exp: Ditto.
+	* gdb.base/recurse.exp: Ditto.
+	* gdb.base/scope.exp: Ditto.
+	* gdb.base/signals.exp: Ditto.
+
 Tue Jun 25 23:16:58 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 
 	* gdb.threads/Makefile.in (docdir): Removed.
diff --git a/gdb/testsuite/config/hppro.exp b/gdb/testsuite/config/hppro.exp
index d71a398c13d..f015c866e20 100644
--- a/gdb/testsuite/config/hppro.exp
+++ b/gdb/testsuite/config/hppro.exp
@@ -2,3 +2,4 @@ load_lib ../config/monitor.exp
 
 # Hppro monitor is very slow...
 set timeout 540
+verbose "Timeout is now $timeout seconds" 2
diff --git a/gdb/testsuite/config/mips-gdb.exp b/gdb/testsuite/config/mips-gdb.exp
index 629f02adfbb..2043f729463 100644
--- a/gdb/testsuite/config/mips-gdb.exp
+++ b/gdb/testsuite/config/mips-gdb.exp
@@ -77,6 +77,7 @@ proc gdb_load { arg } {
 
     send "target mips $targetname\n"
     set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re "Remote MIPS debugging.*$prompt $"	{
 	    if $verbose>1 then {
@@ -86,6 +87,7 @@ proc gdb_load { arg } {
 	timeout { 
 	    perror "Couldn't set MIPS target."
 	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
 	    return -1
 	}
     }
@@ -95,12 +97,14 @@ proc gdb_load { arg } {
 	send_user "Loading $arg into $GDB\n"
     }
     set timeout 2400
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re "Loading.*$prompt $" {
 	    if $verbose>1 then {
 		send_user "Loaded $arg into $GDB\n"
 	    }
 	    set timeout 30
+	    verbose "Timeout is now $timeout seconds" 2
 	}
 	-re "$prompt $"     {
 	    if $verbose>1 then {
@@ -114,6 +118,7 @@ proc gdb_load { arg } {
 	}
     }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
     if [info exists expect_out(buffer)] then {
 	send_log $expect_out(buffer)
     }
@@ -204,6 +209,7 @@ proc gdb_start { } {
 #    }
 #    send "target mips $targetname\n"
 #    set timeout 60
+#    verbose "Timeout is now $timeout seconds" 2
 #    expect {
 #	-re "Remote MIPS debugging.*$prompt $"	{
 #	    if $verbose>1 then {
@@ -213,10 +219,12 @@ proc gdb_start { } {
 #	timeout { 
 #	    perror "Couldn't set MIPS target."
 #	    set timeout 10
+#	    verbose "Timeout is now $timeout seconds" 2
 #	    return -1
 #	}
 #    }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 }
 
 expect_after {
diff --git a/gdb/testsuite/config/netware.exp b/gdb/testsuite/config/netware.exp
new file mode 100644
index 00000000000..7dcad4d6350
--- /dev/null
+++ b/gdb/testsuite/config/netware.exp
@@ -0,0 +1,213 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by J.T. Conklin. (jtc@cygnus.com)
+
+load_lib gdb.exp
+load_lib remote.exp
+
+global shell_id
+global passwd
+
+global LD
+if ![info exists LD] then {
+	set LD [findfile "$base_dir/../../ld/ld.new"]
+}
+
+global NLMCONV
+if ![info exists NLMCONV] then {
+	set NLMCONV [findfile "$base_dir/../../binutils/nlmconv"]
+}
+
+#
+# gdb_version -- extract and print the version number of gcc
+#
+proc gdb_version {} {
+    default_gdb_version
+}
+
+#
+# gdb_unload -- unload a file if one is loaded
+#
+
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+proc gdb_load { arg } {
+    global prompt
+    global LD
+    global NLMCONV
+    global errorCode
+    global targetname
+    global shell_id
+
+    set obj [file tail $arg]
+    set nlm "$obj.nlm"
+    set lnk "$obj.lnk"
+
+    # build *.lnk file
+    set fd [open $lnk w]
+    puts $fd "description \"[file tail $nlm]\""
+    puts $fd "screenname \"System Console\""
+    puts $fd "module clib.nlm"
+    puts $fd "module mathlib.nlm"
+    puts $fd "stack 32768"
+#    puts $fd "stack 64512"
+    puts $fd "debug"
+    # FIXME: don't hardcode location of prelude.o
+    puts $fd "input /s1/cygnus/dejagnu/i386-netware/lib/prelude.o"
+    puts $fd "input $arg"
+    puts $fd "output $nlm"
+    close $fd
+
+    # run nlmconv
+    verbose "Executing: $NLMCONV -l$LD -T$lnk" 1
+    catch "exec $NLMCONV -l$LD -T$lnk" output
+    if ![string match "" $output] then {
+	verbose $output 1
+    }
+    if ![string match "NONE" $errorCode] {
+	warning "Can't link $arg"
+
+	return -1
+    }
+    catch "exec rm -f $lnk"
+
+    # download
+    verbose "Downloading $nlm" 1
+    catch "exec cp $nlm /.NetWare/$targetname.nws/sys.nwv/tmp/x.nlm" output
+    if ![string match "" $output] then {
+	verbose $output 1
+	return -1
+    }
+
+    gdb_file_cmd $nlm
+}
+
+proc gdb_start { } {
+    default_gdb_start
+}
+  
+proc gdb_exit { } {
+    catch default_gdb_exit
+}
+
+proc gdb_run_cmd { } {
+    global shell_id
+    global prompt
+    global baud serialport
+    global targetname
+    global timeout
+
+    send "kill\n"
+    expect {
+	-re ".*Kill the program being debugged.*y or n. $" {
+	    send "y\n"
+	    exp_continue
+	}
+	-re ".*$prompt $" {}
+    }
+
+    verbose "Starting GDB stub on $targetname" 1
+    send -i $shell_id "load nlmstub BAUD=$baud x.nlm\r\n"
+
+    send "set remotebaud $baud\n"
+    expect {
+	-re "$prompt" {}
+	timeout {
+	    perror "Couldn't set remote baud rate"
+	    return
+	}
+    }
+
+    set otimeout $timeout
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    send "target remote $serialport\n"
+    expect {
+	-re "Couldn't establish connection to remote target" {
+	    send "target remote $serialport\n"
+	    exp_continue
+	}
+	-re "$prompt" {}
+	timeout {
+	    perror "Couldn't set remote target"
+	    return
+	}
+    }
+    set timeout $otimeout
+    verbose "Timeout is now $timeout seconds" 2
+
+    send "continue\n"
+    expect {
+	"Continuing.$" {}
+    }
+
+    return
+}
+
+
+
+#
+# start the remote shell
+#
+
+set shell_prompt "Password:"
+set shell_id [ eval $connectmode "$targetname" ]
+
+if $shell_id<0 then {
+    warning "Couldn't connect to target"
+    return -1
+}
+
+if [string match "" $passwd] then {
+    stty -echo
+    send_user "Password: "
+    expect_user -re "(.*)\n"
+    send_user "\n"
+    set passwd "$expect_out(1,string)"
+    stty echo
+}
+
+send -i $shell_id "$passwd\n"
+expect {
+    -i $shell_id ":" {
+	verbose "Got termtype prompt" 0
+    }
+
+    -i $shell_id timeout {
+	warning "Connection timed out"
+	return -1
+    }
+}
+
+
+set shell_prompt "[string toupper $targetname]:"
+send -i $shell_id "1\n"
+
+expect {
+    -i $shell_id -re "$shell_prompt" {}
+    -i $shell_id timeout {
+	warning "Connection timed out"
+	return -1
+    }
+}
+
+gdb_start
diff --git a/gdb/testsuite/config/sim-gdb.exp b/gdb/testsuite/config/sim-gdb.exp
index 821e82fe5a4..a6e2daf26ef 100644
--- a/gdb/testsuite/config/sim-gdb.exp
+++ b/gdb/testsuite/config/sim-gdb.exp
@@ -54,6 +54,7 @@ proc gdb_target_sim { } {
 
     send "target sim $target_sim_options\n"
     set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re "Connected to the simulator.*$prompt $"	{
 	    verbose "Set target to sim"
@@ -65,6 +66,7 @@ proc gdb_target_sim { } {
 	}
     }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 }
 
 #
@@ -84,22 +86,24 @@ proc gdb_load { arg } {
 
     send "load\n"
     set timeout 2400
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re ".*$prompt $" {
 	    if $verbose>1 then {
 		send_user "Loaded $arg into $GDB\n"
 	    }
 	    set timeout 30
+	    verbose "Timeout is now $timeout seconds" 2
 	    return 1
 	}
 	-re "$prompt $"     {
 	    if $verbose>1 then {
-	 perror "GDB couldn't load."
+		perror "GDB couldn't load."
 	    }
 	}
 	timeout {
 	    if $verbose>1 then {
-	 perror "Timed out trying to load $arg."
+		perror "Timed out trying to load $arg."
 	    }
 	}
     }
diff --git a/gdb/testsuite/config/slite-gdb.exp b/gdb/testsuite/config/slite-gdb.exp
index 30cab590c7a..3d4b2651362 100644
--- a/gdb/testsuite/config/slite-gdb.exp
+++ b/gdb/testsuite/config/slite-gdb.exp
@@ -81,6 +81,7 @@ proc gdb_load { arg } {
 
     send "target sparclite $targetname\n"
     set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re ".*SPARClite appears to be alive.*$prompt $"	{
 	    if $verbose>1 then {
@@ -90,6 +91,7 @@ proc gdb_load { arg } {
 	timeout { 
 	    perror "Couldn't set SLITE target."
 	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
 	    return -1
 	}
     }
@@ -99,12 +101,14 @@ proc gdb_load { arg } {
 	send_user "Loading $arg into $GDB\n"
     }
     set timeout 2400
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re "Loading.*$prompt $" {
 	    if $verbose>1 then {
 		send_user "Loaded $arg into $GDB\n"
 	    }
 	    set timeout 30
+	    verbose "Timeout is now $timeout seconds" 2
 	}
 	-re "$prompt $"     {
 	    if $verbose>1 then {
@@ -118,9 +122,11 @@ proc gdb_load { arg } {
 	}
     }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 
     send "target remote $targetname\n"
     set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re ".*$prompt $"	{
 	    if $verbose>1 then {
@@ -130,6 +136,7 @@ proc gdb_load { arg } {
 	timeout { 
 	    perror "Couldn't set remote target."
 	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
 	    return -1
 	}
     }
@@ -224,6 +231,7 @@ proc gdb_start { } {
 #    }
 #    send "target mips $targetname\n"
 #    set timeout 60
+#    verbose "Timeout is now $timeout seconds" 2
 #    expect {
 #	-re "Remote MIPS debugging.*$prompt $"	{
 #	    if $verbose>1 then {
@@ -233,10 +241,12 @@ proc gdb_start { } {
 #	timeout { 
 #	    perror "Couldn't set MIPS target."
 #	    set timeout 10
+#	    verbose "Timeout is now $timeout seconds" 2
 #	    return -1
 #	}
 #    }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 }
 
 expect_after {
diff --git a/gdb/testsuite/config/udi-gdb.exp b/gdb/testsuite/config/udi-gdb.exp
index f378d30d445..9a369fde4ce 100644
--- a/gdb/testsuite/config/udi-gdb.exp
+++ b/gdb/testsuite/config/udi-gdb.exp
@@ -47,6 +47,7 @@ proc gdb_target_udi { } {
     # set targets hostname
     send "target udi $targetname\n"
     set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re "target udi $targetname\[\r\n\]+" {
 	    exp_continue
@@ -71,6 +72,7 @@ proc gdb_target_udi { } {
 	}
     }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 }
 
 #
diff --git a/gdb/testsuite/config/unix-gdb.exp b/gdb/testsuite/config/unix-gdb.exp
index 01441d59c90..9961ec6ab69 100644
--- a/gdb/testsuite/config/unix-gdb.exp
+++ b/gdb/testsuite/config/unix-gdb.exp
@@ -24,6 +24,7 @@
 # When running the tests over NFS, under somewhat heavy load, 10 seconds
 # does not seem to be enough.  Try starting with 30.
 set timeout 30
+verbose "Timeout is now $timeout seconds" 2
 
 load_lib gdb.exp
 
diff --git a/gdb/testsuite/config/vx-gdb.exp b/gdb/testsuite/config/vx-gdb.exp
index 43ffb3c5cc2..984f4beabbb 100644
--- a/gdb/testsuite/config/vx-gdb.exp
+++ b/gdb/testsuite/config/vx-gdb.exp
@@ -71,7 +71,7 @@ proc gdb_start { } {
     # get a connection to the board
     set shell_id [ eval $connectmode "$targetname" ]
     if $shell_id<0 then {
- perror "Couldn't connect to $targetname."
+	perror "Couldn't connect to $targetname."
 	return -1
     }
     verbose "Spawn id for remote shell is $shell_id"
@@ -82,16 +82,17 @@ proc gdb_start { } {
 
 	send -i $shell_id "\030"
 	set timeout 120
+	verbose "Timeout is now $timeout seconds" 2
 	expect {
 	    -i $shell_id -re "Connection closed.*$" {
 		verbose "\nVxWorks has closed the shell"
 		}
 	    -i $shell_id eof {
-	 perror "(eof) never disconnected from VxWorks shell."
+		perror "(eof) never disconnected from VxWorks shell."
 		return -1
 	    }
 	    -i $shell_id timeout {
-	 perror "(timeout) never disconnected from VxWorks shell."
+		perror "(timeout) never disconnected from VxWorks shell."
 		return -1
 	    }
 	}
@@ -99,6 +100,7 @@ proc gdb_start { } {
 	wait -i $shell_id
     }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 
     catch "spawn_vxgdb"
 }
@@ -119,6 +121,7 @@ proc spawn_vxgdb { } {
     # set targets hostname
     send "target vxworks $targetname\n"
     set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
     expect {
 	-re "Done\..*$prompt $"	{
 	    verbose "Set target to $targetname" 1
@@ -130,10 +133,12 @@ proc spawn_vxgdb { } {
 	timeout { 
 	    perror "Couldn't set target for vxworks."
 	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
 	    return -1
 	}
     }
     set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
 }
 
 proc gdb_exit { } {
diff --git a/gdb/testsuite/gdb.base/a1-selftest.exp b/gdb/testsuite/gdb.base/a1-selftest.exp
index f8718b041a7..d9eb85941e8 100644
--- a/gdb/testsuite/gdb.base/a1-selftest.exp
+++ b/gdb/testsuite/gdb.base/a1-selftest.exp
@@ -44,6 +44,7 @@ proc test_with_self {} {
     global tool
     global det_file
     global decimal
+    global timeout
 
     # load yourself into the debugger
     # This can take a relatively long time, particularly for testing where
@@ -56,6 +57,7 @@ proc test_with_self {} {
     # of this test, and then back to the original value.
 
     set timeout 600
+    verbose "Timeout is now $timeout seconds" 2
     if {[gdb_load "./x$tool"] <0} then {
 	return -1
     }
@@ -118,6 +120,7 @@ proc test_with_self {} {
     # It may take a very long time for the inferior gdb to start (lynx),
     # so we wait until after it's started to reset the timeout value.
     set timeout 30
+    verbose "Timeout is now $timeout seconds" 2
 
     # do we have a version number ?
     send "print version\n"
diff --git a/gdb/testsuite/gdb.base/list.exp b/gdb/testsuite/gdb.base/list.exp
index 82d4fc2521b..1aadd4ccbfc 100644
--- a/gdb/testsuite/gdb.base/list.exp
+++ b/gdb/testsuite/gdb.base/list.exp
@@ -28,24 +28,29 @@ set bug_id 0
 
 set testfile "list"
 set binfile ${objdir}/${subdir}/${testfile}
-if  { [compile "${srcdir}/${subdir}/list0.c -g -c -o ${binfile}0.o"] != "" } {
+if  { [compile "-g -c ${srcdir}/${subdir}/list0.c"] != "" } {
     perror "Couldn't compile ${testfile}0.c to object"
     return -1
 }
-if  { [compile "${srcdir}/${subdir}/list1.c -g -c -o ${binfile}1.o"] != "" } {
+execute_anywhere "mv list0.o ${binfile}0.o"
+if  { [compile "-g -c ${srcdir}/${subdir}/list1.c"] != "" } {
     perror "Couldn't compile ${testfile}1.c to object"
     return -1
 }
+execute_anywhere "mv list1.o ${binfile}1.o"
 if  { [compile "${binfile}0.o ${binfile}1.o -o ${binfile}"] != "" } {
     perror "Couldn't link ${testfile}."
     return -1
 }
 
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
 execute_anywhere "rm -f ${binfile}.ci"
 if  { [compile "-E ${srcdir}/${subdir}/compiler.c > ${binfile}.ci"] != "" } {
-    perror "Couldn't make ${testfile}.ci file"
+    perror "Couldn't make ${binfile}.ci file"
     return -1
 }
+source ${binfile}.ci
 
 #
 # Local utility proc just to set and verify listsize
@@ -545,7 +550,6 @@ proc test_list_function {} {
     # Ultrix gdb is the second case, still correct.
     # SunPRO cc is the third case.
     setup_xfail "powerpc-*-*"
-    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
     send "list foo\n"
     expect {
 	-re "2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$prompt $" {
@@ -894,6 +898,7 @@ proc test_forward_search {} {
 	# being searched is extremely long.
 
 	set timeout 30
+	verbose "Timeout is now $timeout seconds" 2
 	gdb_test "search 1234" ""
 }
 
@@ -904,8 +909,6 @@ gdb_start
 gdb_reinitialize_dir $srcdir/$subdir
 gdb_load ${binfile}
 
-source ${binfile}.ci
-
 if $usestubs {
     send "step\n"
     # if use stubs step out of the breakpoint() function.
diff --git a/gdb/testsuite/gdb.base/signals.exp b/gdb/testsuite/gdb.base/signals.exp
index 4f9861dd701..d48fac928ac 100644
--- a/gdb/testsuite/gdb.base/signals.exp
+++ b/gdb/testsuite/gdb.base/signals.exp
@@ -18,12 +18,14 @@ if  { [compile "${srcdir}/${subdir}/${srcfile} -g -o ${binfile}"] != "" } {
     return -1
 }
 
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
 execute_anywhere "rm -f ${binfile}.ci"
 if  { [compile "-E ${srcdir}/${subdir}/compiler.c > ${binfile}.ci"] != "" } {
-    perror "Couldn't make ${testfile}.ci file"
+    perror "Couldn't make ${binfile}.ci file"
     return -1
 }
-source gdb.base/${testfile}.ci
+source ${binfile}.ci
 
 proc signal_tests_1 {} {
     global prompt
@@ -303,8 +305,8 @@ proc test_handle_all_print {} {
     # Increase timeout and expect input buffer for large output from gdb.
     # Allow blank or TAB as whitespace characters.
     set timeout 30
+    verbose "Timeout is now $timeout seconds" 2
     match_max 8000
-    setup_xfail "alpha-dec-osf2*"
     gdb_test "handle all print" "Signal\[ 	\]+Stop\[ 	\]+Print\[ 	\]+Pass to program\[ 	\]+Description\r\nSIGHUP\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Hangup.*SIG63\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Real-time event 63"
 }
 test_handle_all_print
@@ -365,9 +367,8 @@ if [runto_main] then {
 The program being debugged stopped while in a function called from GDB.*" \
 	"p func1 () #2 in signals.exp"
     # But we should be able to backtrace...
-    # On alpha-*-osf2.0 this test works when run manually but fails when
+    # On alpha-*-osf2.0 this test works when run manually but sometime fails when
     # run under dejagnu, making it very hard to debug the problem.  Weird...
-    if {$gcc_compiled} then { setup_xfail "alpha-*-osf2*" }
     gdb_test "bt" "#0.*handler.*#1.*#2.*main.*" "bt in signals.exp"
     # ...and continue...
     gdb_test "continue" "Continuing\\." "continue in signals.exp"
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index 9eaa40c0c21..67f3fdc49d4 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -35,38 +35,39 @@ global CHILL_RT0
 
 if ![info exists CC] {
     set CC [findfile $base_dir/../../gcc/xgcc "$base_dir/../../gcc/xgcc -B$base_dir/../../gcc/" [transform gcc]]
-    verbose "CC defaulting to $CC" 2
 }
+verbose "using CC = $CC" 2
 if ![info exists CXX] {
     set CXX [findfile $base_dir/../../gcc/xgcc "$base_dir/../../gcc/xgcc -B$base_dir/../../gcc/" [transform g++]]
-    verbose "CXX defaulting to $CC" 2
 }
+verbose "using CXX = $CXX" 2
 if ![info exists CHILL_LIB] {
     set CHILL_LIB [findfile $base_dir/../../gcc/ch/runtime/libchill.a "$base_dir/../../gcc/ch/runtime/libchill.a" [transform -lchill]]
-    verbose "CHILL_LIB defaulting to $CHILL_LIB" 2
 }
+verbose "using CHILL_LIB = $CHILL_LIB" 2
 if ![info exists CHILL_RT0] {
     set CHILL_RT0 [findfile $base_dir/../../gcc/ch/runtime/chillrt0.o "$base_dir/../../gcc/ch/runtime/chillrt0.o" ""]
-    verbose "CHILL_RT0 defaulting to $CHILL_RT0" 2
 }
+verbose "using CHILL_RT0 = $CHILL_RT0" 2
 
 if ![info exists LDFLAGS] {
     if [is3way] {
 	append LDFLAGS " [libgloss_flags] [newlib_flags]"
     }
     set LDFLAGS ""
-    verbose "LDFLAGS defaulting to $LDFLAGS" 2
 }
+verbose "using LDFLAGS = $LDFLAGS" 2
 
 if ![info exists GDB] then {
     set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]]
 }
-
+verbose "using GDB = $GDB" 2
 
 global GDBFLAGS
 if ![info exists GDBFLAGS] then {
     set GDBFLAGS "-nx"
 }
+verbose "using GDBFLAGS = $GDBFLAGS" 2
 
 # The variable prompt is a regexp which matches the gdb prompt.  Set it if it
 # is not already set.
@@ -94,6 +95,10 @@ if ![info exists noinferiorio] then {
     set noinferiorio 0
 }
 
+if ![info exists noresults] then {
+    set noresults 0
+}
+
 #
 # gdb_version -- extract and print the version number of GDB
 #
@@ -185,7 +190,7 @@ proc gdb_run_cmd {} {
 		send "y\n"
 		expect {
 		    -re "Continuing.*$prompt $" {}
-		    timeout { perror "Jump to start() failed"; return }
+		    timeout { perror "Jump to start() failed (timeout)"; return }
 		}
             }
 	    timeout { perror "Jump to start() failed (timeout)"; return }
@@ -521,6 +526,7 @@ proc default_gdb_exit {} {
 
     # This used to be 1 for unix-gdb.exp
     set timeout 5
+    verbose "Timeout is now $timeout seconds" 2
 
     # We used to try to send "quit" to GDB, and wait for it to die.
     # Dealing with all the cases and errors got pretty hairy.  Just close it, 
@@ -614,6 +620,7 @@ proc default_gdb_start { } {
     
     set oldtimeout $timeout
     set timeout [expr "$timeout + 60"]
+    verbose "Timeout is now $timeout seconds" 2
     eval "spawn $GDB -nw $GDBFLAGS"
     expect {
 	-re ".*\r\n$prompt $" {
@@ -629,6 +636,7 @@ proc default_gdb_start { } {
 	}
     }
     set timeout $oldtimeout
+    verbose "Timeout is now $timeout seconds" 2
     # force the height to "unlimited", so no pagers get used
     send "set height 0\n"
     expect {