From: Thomas Petazzoni Date: Tue, 1 Jul 2014 17:39:16 +0000 (+0200) Subject: grub2: fix a few minor issues in help text X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a3ac2a6f58ce9f83ec23d3fd8fcc74f894ea7ea4;p=buildroot.git grub2: fix a few minor issues in help text The help text of grub2 explains the detailed steps to create a disk image with grub2 installed on it. However, the steps for the BIOS-based systems have a few minor issues fixed by this patch: - When calling partx to get the partitions detected, we should do it on the /dev/loop0 block device, and not on the underlying disk.img image file. - The grub-bios-setup utility must be called as root to work properly on /dev/loop0. - The steps to cleanup the partx and loop device were missing. Signed-off-by: Thomas Petazzoni --- diff --git a/boot/grub2/Config.in b/boot/grub2/Config.in index 5e7ccd2bfb..a27c07ab7a 100644 --- a/boot/grub2/Config.in +++ b/boot/grub2/Config.in @@ -24,17 +24,20 @@ config BR2_TARGET_GRUB2 store Grub2. Leaving 1 MB of free space is safe. 3. Setup loop device and loop partitions sudo losetup -f disk.img - sudo partx -a disk.img + sudo partx -a /dev/loop0 4. Prepare the root partition sudo mkfs.ext3 -L root /dev/loop0p1 sudo mount /dev/loop0p1 /mnt sudo tar -C /mnt -xf output/images/rootfs.tar sudo umount /mnt 5. Install Grub2 - ./output/host/usr/sbin/grub-bios-setup \ + sudo ./output/host/usr/sbin/grub-bios-setup \ -b ./output/host/usr/lib/grub/i386-pc/boot.img \ -c ./output/images/grub.img -d . /dev/loop0 - 6. Your disk.img is ready! + 6. Cleanup loop device + sudo partx -d /dev/loop0 + sudo losetup -d /dev/loop0 + 7. Your disk.img is ready! To test your BIOS image in Qemu: