From: Roland Pesch Date: Thu, 16 May 1991 02:16:27 +0000 (+0000) Subject: (1) new Appendix, Renamed Commands; X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a3bb247ef0a22881a0b1f6bb9b2561bdb14b1428;p=binutils-gdb.git (1) new Appendix, Renamed Commands; (2) new leading subsection, Contributors to GDB --- diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 944bc44e3e7..fe2f50a3cff 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -116,7 +116,38 @@ original English. @end titlepage @page -@node Top, New Features, (dir), (dir) +@node Top, Summary, (dir), (dir) +@ifinfo +This file describes version 4.0 of GDB, the GNU symbolic debugger. +@end ifinfo + +@menu +* Summary:: Summary of _GDBN__ +* New Features:: New Features in _GDBN__ version 4.0 +* Sample Session:: A Sample _GDBN__ Session +* Invocation:: Getting In and Out of _GDBN__ +* Commands:: _GDBN__ Commands +* Running:: Running Programs Under _GDBN__ +* Stopping:: Stopping and Continuing +* Stack:: Examining the Stack +* Source:: Examining Source Files +* Data:: Examining Data +* Symbols:: Examining the Symbol Table +* Altering:: Altering Execution +* _GDBN__ Files:: _GDBN__'s Files +* Targets:: Specifying a Debugging Target +* Controlling _GDBN__:: Controlling _GDBN__ +* Sequences:: Canned Sequences of Commands +* Emacs:: Using _GDBN__ under GNU Emacs +* _GDBN__ Bugs:: Reporting Bugs in _GDBN__ +* Renamed Commands:: _GDBN__ 4.0 Renamed Commands +* Installing _GDBN__:: Installing _GDBN__ +* Copying:: GNU GENERAL PUBLIC LICENSE +* Index:: Index + +@end menu + +@node Summary, New Features, Top, Top @unnumbered Summary of _GDBN__ The purpose of a debugger such as _GDBN__ is to allow you to see what is @@ -145,6 +176,12 @@ _GDBN__ can be used to debug programs written in C and C++. Pascal support is being implemented, and Fortran support will be added when a GNU Fortran compiler is ready. +@menu +* Free Software:: Free Software +* Contributors:: Contributors to GDB +@end menu + +@node Free Software, Contributors, Summary, Summary @unnumberedsec Free Software _GDBN__ is @dfn{free software}, protected by the GNU General Public License (GPL). The GPL gives you the freedom to copy or adapt a licensed @@ -159,31 +196,74 @@ you have these freedoms and that you can't take these freedoms away from anyone else. For full details, @pxref{Copying}. +@node Contributors, , Free Software, Summary +@unnumberedsec Contributors to GDB -@menu -* New Features:: New Features in _GDBN__ version 4.0 -* Sample Session:: A Sample _GDBN__ Session -* Invocation:: Getting In and Out of _GDBN__ -* Commands:: _GDBN__ Commands -* Running:: Running Programs Under _GDBN__ -* Stopping:: Stopping and Continuing -* Stack:: Examining the Stack -* Source:: Examining Source Files -* Data:: Examining Data -* Symbols:: Examining the Symbol Table -* Altering:: Altering Execution -* GDB Files:: _GDBN__'s Files -* Targets:: Specifying a Debugging Target -* Controlling _GDBN__:: Controlling _GDBN__ -* Sequences:: Canned Sequences of Commands -* Emacs:: Using _GDBN__ under GNU Emacs -* _GDBN__ Bugs:: Reporting Bugs in _GDBN__ -* Installing _GDBN__:: Installing _GDBN__ -* Copying:: GNU GENERAL PUBLIC LICENSE -* Index:: Index -@end menu +Richard Stallman was the original author of GDB, as with many GNU +programs. Many others have contributed to its development. This +section attempts to credit major contributors. One of the virtues of +free software is that everyone is free to contribute to it; with +regret, we cannot actually acknowledge everyone here. The file +@file{ChangeLog} in the GDB distribution approximates a blow-by-blow +account. + +Changes much prior to version 2.0 are lost in the mists of time. + +@quotation +@emph{Plea:} Additions to this section are particularly welcome. If you +or your friends (or enemies; let's be evenhanded) have been unfairly +omitted from this list, we would like to add your names! +@end quotation -@node New Features, Sample Session, Top, Top +So that they may not regard their long labor as thankless, we +particularly thank those who shepherded GDB through major releases: +John Gilmore (release 4.0); Jim Kingdon (releases 3.9, 3.5, 3.4, 3.3); +and Randy Smith (releases 3.2, 3.1, 3.0). As major maintainer of GDB +for some period, each contributed significantly to the structure, +stability, and capabilities of the entire debugger. + +Richard Stallman, assisted at various times by Pete TerMaat, Chris +Hanson, and Richard Mlynarik, handled releases through 2.8. + +Michael Tiemann is the author of most of the GNU C++ support in GDB, +with significant additional contributions from Per Bothner. James +Clark wrote the GNU C++ demangler. Early work on C++ was by Peter +TerMaat (who also did much general update work leading to release 3.0). + +GDB 4.0 uses the BFD subroutine library to examine multiple +object-file formats; BFD was a joint project of V. Gumby +Henkel-Wallace, Rich Pixley, Steve Chamberlain, and John Gilmore. + +David Johnson wrote the original COFF support; Pace Willison did +the original support for encapsulated COFF. + +Adam de Boor and Bradley Davis contributed the ISI Optimum V support. +Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS +support. Jean-Daniel Fekete contributed Sun 386i support. Chris +Hanson improved the HP9000 support. Noboyuki Hikichi and Tomoyuki +Hasei contributed Sony/News OS 3 support. David Johnson contributed +Encore Umax support. Jyrki Kuoppala contributed Altos 3068 support. +Keith Packard contributed NS32K support. Doug Rabson contributed +Acorn Risc Machine support. Chris Smith contributed Convex support +(and Fortran debugging). Jonathan Stone contributed Pyramid support. +Michael Tiemann contributed SPARC support. Tim Tucker contributed +support for the Gould NP1 and Gould Powernode. Pace Willison +contributed Intel 386 support. Jay Vosburgh contributed Symmetry +support. + +Rich Schaefer helped with support of SunOS shared libraries. + +Jay Fenlason and Roland McGrath ensured that GDB and GAS agree about +several machine instruction sets. + +Patrick Duval, Ted Goldstein, Vikram Koka and Glenn Engel helped +develop remote debugging. Intel Corporation and Wind River Systems +contributed remote debugging modules for their products. + +Brian Fox is the author of the readline libraries providing +command-line editing and command history. + +@node New Features, Sample Session, Summary, Top @unnumbered New Features in _GDBN__ version 4.0 @table @emph @@ -232,6 +312,13 @@ before the stack is peeled back to the exception handler's context. You can suppress output of machine-level addresses, displaying only source language information. +@item Command Rationalization +Many _GDBN__ commands have been renamed to make them easier to remember +and use. In particular, the subcommands of @code{info} and +@code{show}/@code{set} are grouped to make the former refer to the state +of your program, and the latter refer to the state of _GDBN__ itself. +@xref{Renamed Commands}, for details on what commands were renamed. + @item Ports _GDBN__ has been ported to the following new architectures: AT&T 3b1, Acorn RISC machine, HP300 running HPUX, big- and little-endian MIPS @@ -512,9 +599,9 @@ _1__@end smallexample @chapter Getting In and Out of _GDBN__ @menu -* Starting _GDBN__:: Starting _GDBN__ -* Leaving _GDBN__:: Leaving _GDBN__ -* Shell Commands:: Shell Commands +* Starting _GDBN__:: Starting _GDBN__ +* Leaving _GDBN__:: Leaving _GDBN__ +* Shell Commands:: Shell Commands @end menu @node Starting _GDBN__, Leaving _GDBN__, Invocation, Invocation @@ -550,11 +637,11 @@ in sequential order. The order makes a difference when the @samp{-x} option is used. @menu -* File Options:: Choosing Files -* Mode Options:: Choosing Modes -* i960-Nindy Remote:: _GDBN__ with a Remote i960 (Nindy) -* EB29K Remote:: _GDBN__ with a Remote EB29K -* VxWorks Remote:: _GDBN__ and VxWorks +* File Options:: Choosing Files +* Mode Options:: Choosing Modes +* i960-Nindy Remote:: +* EB29K Remote:: +* VxWorks Remote:: @end menu @node File Options, Mode Options, Starting _GDBN__, Starting _GDBN__ @@ -670,9 +757,9 @@ By using the @code{target} command at any point during your _GDBN__ session. @end itemize @menu -* Nindy Startup:: Startup with Nindy -* Nindy Options:: Options for Nindy -* Nindy reset:: Nindy Reset Command +* Nindy Startup:: Startup with Nindy +* Nindy Options:: Options for Nindy +* Nindy reset:: Nindy Reset Command @end menu @node Nindy Startup, Nindy Options, i960-Nindy Remote, i960-Nindy Remote @@ -761,9 +848,9 @@ you've hooked the cable between the PC's @file{COM1} port and @file{/dev/ttya} on the Unix system. @menu -* Comms (EB29K):: Communications Setup -* _GDBP__-EB29K:: EB29K cross-debugging -* Remote Log:: Remote Log +* Comms (EB29K):: Communications Setup +* _GDBP__-EB29K:: EB29K cross-debugging +* Remote Log:: Remote Log @end menu @node Comms (EB29K), _GDBP__-EB29K, EB29K Remote, EB29K Remote @@ -956,9 +1043,9 @@ _GDBN__ will come up showing the prompt: @end smallexample @menu -* VxWorks connection:: Connecting to VxWorks -* VxWorks download:: VxWorks Download -* VxWorks attach:: Running Tasks +* VxWorks connection:: Connecting to VxWorks +* VxWorks download:: VxWorks Download +* VxWorks attach:: Running Tasks @end menu @node VxWorks connection, VxWorks download, VxWorks Remote, VxWorks Remote @@ -1099,8 +1186,8 @@ arguments. This is equivalent to @samp{shell make @var{make-args}}. @chapter _GDBN__ Commands @menu -* Command Syntax:: Command Syntax -* Help:: Getting Help +* Command Syntax:: Command Syntax +* Help:: Getting Help @end menu @node Command Syntax, Help, Commands, Commands @@ -1255,14 +1342,14 @@ Display the GNU ``NO WARRANTY'' statement. @chapter Running Programs Under _GDBN__ @menu -* Compilation:: Compiling for Debugging -* Starting:: Starting your Program -* Arguments:: Your Program's Arguments -* Environment:: Your Program's Environment -* Working Directory:: Your Program's Working Directory -* Input/Output:: Your Program's Input and Output -* Attach:: Debugging an Already-Running Process -* Kill Process:: Killing the Child Process +* Compilation:: Compiling for Debugging +* Starting:: Starting your Program +* Arguments:: Your Program's Arguments +* Environment:: Your Program's Environment +* Working Directory:: Your Program's Working Directory +* Input/Output:: Your Program's Input and Output +* Attach:: Debugging an Already-Running Process +* Kill Process:: Killing the Child Process @end menu @node Compilation, Starting, Running, Running @@ -1653,10 +1740,10 @@ running or not, what process it is, and why it stopped. @end table @menu -* Breakpoints:: Breakpoints -* Stepping:: Stepping -* Continuing:: Continuing -* Signals:: Signals +* Breakpoints:: Breakpoints +* Stepping:: Stepping +* Continuing:: Continuing +* Signals:: Signals @end menu @node Breakpoints, Stepping, Stopping, Stopping @@ -1677,14 +1764,14 @@ breakpoint you want to change. Each breakpoint may be @dfn{enabled} or enable it again. @menu -* Set Breaks:: Setting Breakpoints -* Set Watchpoints:: Setting Watchpoints -* Exception Handling:: Breakpoints and Exceptions -* Delete Breaks:: Deleting Breakpoints -* Disabling:: Disabling Breakpoints -* Conditions:: Break Conditions -* Break Commands:: Breakpoint Command Lists -* Error in Breakpoints:: ``Cannot Insert Breakpoints'' +* Set Breaks:: Setting Breakpoints +* Set Watchpoints:: Setting Watchpoints +* Exception Handling:: Breakpoints and Exceptions +* Delete Breaks:: Deleting Breakpoints +* Disabling:: Disabling Breakpoints +* Conditions:: Break Conditions +* Break Commands:: Breakpoint Command Lists +* Error in Breakpoints:: @end menu @node Set Breaks, Set Watchpoints, Breakpoints, Breakpoints @@ -2489,10 +2576,10 @@ frame and describes it briefly as the @code{frame} command does (@pxref{Frame Info, Info}). @menu -* Frames:: Stack Frames -* Backtrace:: Backtraces -* Selection:: Selecting a Frame -* Frame Info:: Information on a Frame +* Frames:: Stack Frames +* Backtrace:: Backtraces +* Selection:: Selecting a Frame +* Frame Info:: Information on a Frame @end menu @node Frames, Backtrace, Stack, Stack @@ -2739,10 +2826,10 @@ If you use _GDBN__ through its GNU Emacs interface, you may prefer to use Emacs facilities to view source; @pxref{Emacs}. @menu -* List:: Printing Source Lines -* Search:: Searching Source Files -* Source Path:: Specifying Source Directories -* Machine Code:: Source and Machine Code +* List:: Printing Source Lines +* Search:: Searching Source Files +* Source Path:: Specifying Source Directories +* Machine Code:: Source and Machine Code @end menu @node List, Search, Source, Source @@ -3001,17 +3088,17 @@ It examines data in memory at a specified address and prints it in a specified format. @xref{Memory}. @menu -* Expressions:: Expressions -* Variables:: Program Variables -* Arrays:: Artificial Arrays -* Output formats:: Output formats -* Memory:: Examining Memory -* Auto Display:: Automatic Display -* Print Settings:: Print Settings -* Value History:: Value History -* Convenience Vars:: Convenience Variables -* Registers:: Registers -* Floating Point Hardware:: Floating Point Hardware +* Expressions:: Expressions +* Variables:: Program Variables +* Arrays:: Artificial Arrays +* Output formats:: Output formats +* Memory:: Examining Memory +* Auto Display:: Automatic Display +* Print Settings:: Print Settings +* Value History:: Value History +* Convenience Vars:: Convenience Variables +* Registers:: Registers +* Floating Point Hardware:: Floating Point Hardware @end menu @node Expressions, Variables, Data, Data @@ -4001,7 +4088,7 @@ Write a complete dump of the debugger's symbol data into the file @var{filename}. @end table -@node Altering, GDB Files, Symbols, Top +@node Altering, _GDBN__ Files, Symbols, Top @chapter Altering Execution Once you think you have found an error in the program, you might want to @@ -4015,11 +4102,11 @@ locations, give the program a signal, restart it at a different address, or even return prematurely from a function to its caller. @menu -* Assignment:: Assignment to Variables -* Jumping:: Continuing at a Different Address -* Signaling:: Giving the Program a Signal -* Returning:: Returning from a Function -* Calling:: Calling your Program's Functions +* Assignment:: Assignment to Variables +* Jumping:: Continuing at a Different Address +* Signaling:: Giving the Program a Signal +* Returning:: Returning from a Function +* Calling:: Calling your Program's Functions @end menu @node Assignment, Jumping, Altering, Altering @@ -4184,15 +4271,15 @@ execute a function from your program, but without cluttering the output with @code{void} returned values. The result is printed and saved in the value history, if it is not void. -@node GDB Files, Targets, Altering, Top +@node _GDBN__ Files, Targets, Altering, Top @chapter _GDBN__'s Files @menu -* Files:: Commands to Specify Files -* Symbol Errors:: Errors Reading Symbol Files +* Files:: Commands to Specify Files +* Symbol Errors:: Errors Reading Symbol Files @end menu -@node Files, Symbol Errors, GDB Files, GDB Files +@node Files, Symbol Errors, _GDBN__ Files, _GDBN__ Files @section Commands to Specify Files @cindex core dump file @cindex symbol table @@ -4384,7 +4471,7 @@ Print the names of the shared libraries which are currently loaded. @code{sharedlibrary} does not repeat automatically when you press @key{RET} after using it once. -@node Symbol Errors, , Files, GDB Files +@node Symbol Errors, , Files, _GDBN__ Files @section Errors Reading Symbol Files While a symbol file is being read, _GDBN__ will occasionally encounter problems, such as symbol types it does not recognize, or known bugs in @@ -4477,7 +4564,7 @@ for some C++ object. @end table -@node Targets, Controlling _GDBN__, GDB Files, Top +@node Targets, Controlling _GDBN__, _GDBN__ Files, Top @chapter Specifying a Debugging Target @cindex debugging target @kindex target @@ -4493,9 +4580,9 @@ serial port, or realtime systems over a TCP/IP connection---you can use the @code{target} command. @menu -* Active Targets:: Active Targets -* Target Commands:: Commands for Managing Targets -* Remote:: Remote Debugging +* Active Targets:: Active Targets +* Target Commands:: Commands for Managing Targets +* Remote:: Remote Debugging @end menu @node Active Targets, Target Commands, Targets, Targets @@ -4660,12 +4747,12 @@ the @code{set} command. For commands controlling how _GDBN__ displays data, @pxref{Print Settings}; other settings are described here. @menu -* Prompt:: Prompt -* Editing:: Command Editing -* History:: Command History -* Screen Size:: Screen Size -* Numbers:: Numbers -* Messages/Warnings:: Optional Warnings and Messages +* Prompt:: Prompt +* Editing:: Command Editing +* History:: Command History +* Screen Size:: Screen Size +* Numbers:: Numbers +* Messages/Warnings:: Optional Warnings and Messages @end menu @node Prompt, Editing, Controlling _GDBN__, Controlling _GDBN__ @@ -4965,9 +5052,9 @@ ways to store sequences of commands for execution as a unit: user-defined commands and command files. @menu -* Define:: User-Defined Commands -* Command Files:: Command Files -* Output:: Commands for Controlled Output +* Define:: User-Defined Commands +* Command Files:: Command Files +* Output:: Commands for Controlled Output @end menu @node Define, Command Files, Sequences, Sequences @@ -5294,7 +5381,7 @@ environment. Users of this environment can use a new command, each value is printed in its own window. @end ignore -@node _GDBN__ Bugs, Installing _GDBN__, Emacs, Top +@node _GDBN__ Bugs, Renamed Commands, Emacs, Top @c node-name, next, previous, up @chapter Reporting Bugs in _GDBN__ @cindex Bugs in _GDBN__ @@ -5311,8 +5398,8 @@ In order for a bug report to serve its purpose, you must include the information that enables us to fix the bug. @menu -* Bug Criteria:: Have You Found a Bug? -* Bug Reporting:: How to Report Bugs +* Bug Criteria:: Have You Found a Bug? +* Bug Reporting:: How to Report Bugs @end menu @node Bug Criteria, Bug Reporting, _GDBN__ Bugs, _GDBN__ Bugs @@ -5518,7 +5605,115 @@ things without first using the debugger to find the facts. @include readline/inc-history.texinfo @end iftex -@node Installing _GDBN__, Copying, _GDBN__ Bugs, Top +@node Renamed Commands, Installing _GDBN__, _GDBN__ Bugs, Top +@appendix _GDBN__ 4.0 Renamed Commands + +The following commands were renamed in _GDBN__ 4.0, in order to make the +command set as a whole more consistent and easier to use and remember: + +@kindex add-syms +@kindex delete environment +@kindex info copying +@kindex info convenience +@kindex info directories +@kindex info editing +@kindex info history +@kindex info targets +@kindex info values +@kindex info version +@kindex info warranty +@kindex set addressprint +@kindex set arrayprint +@kindex set prettyprint +@kindex set screen-height +@kindex set screen-width +@kindex set unionprint +@kindex set vtblprint +@kindex set demangle +@kindex set asm-demangle +@kindex set sevenbit-strings +@kindex set array-max +@kindex set caution +@kindex set history write +@kindex show addressprint +@kindex show arrayprint +@kindex show prettyprint +@kindex show screen-height +@kindex show screen-width +@kindex show unionprint +@kindex show vtblprint +@kindex show demangle +@kindex show asm-demangle +@kindex show sevenbit-strings +@kindex show array-max +@kindex show caution +@kindex show history write +@kindex unset + +@ifinfo +OLD COMMAND NEW COMMAND +--------------- ---------------------------------- +add-syms add-symbol-file +delete environment unset environment +info convenience show convenience +info copying show copying +info directories show directories +info editing show commands +info history show values +info targets help target +info values show values +info version show version +info warranty show warranty +set/show addressprint set/show print address +set/show array-max set/show print elements +set/show arrayprint set/show print array +set/show asm-demangle set/show print asm-demangle +set/show caution set/show confirm +set/show demangle set/show print demangle +set/show history write set/show history save +set/show prettyprint set/show print pretty +set/show screen-height set/show height +set/show screen-width set/show width +set/show sevenbit-strings set/show print sevenbit-strings +set/show unionprint set/show print union +set/show vtblprint set/show print vtbl + +unset [ No longer an alias for delete ] +@end ifinfo + +@tex +\halign{\tt # &\qquad#&\tt #\cr +{\bf Old Command} &&{\bf New Command}\cr +add-syms &&add-symbol-file\cr +delete environment &&unset environment\cr +info convenience &&show convenience\cr +info copying &&show copying\cr +info directories &&show directories \cr +info editing &&show commands\cr +info history &&show values\cr +info targets &&help target\cr +info values &&show values\cr +info version &&show version\cr +info warranty &&show warranty\cr +set{\rm / }show addressprint &&set{\rm / }show print address\cr +set{\rm / }show array-max &&set{\rm / }show print elements\cr +set{\rm / }show arrayprint &&set{\rm / }show print array\cr +set{\rm / }show asm-demangle &&set{\rm / }show print asm-demangle\cr +set{\rm / }show caution &&set{\rm / }show confirm\cr +set{\rm / }show demangle &&set{\rm / }show print demangle\cr +set{\rm / }show history write &&set{\rm / }show history save\cr +set{\rm / }show prettyprint &&set{\rm / }show print pretty\cr +set{\rm / }show screen-height &&set{\rm / }show height\cr +set{\rm / }show screen-width &&set{\rm / }show width\cr +set{\rm / }show sevenbit-strings &&set{\rm / }show print sevenbit-strings\cr +set{\rm / }show unionprint &&set{\rm / }show print union\cr +set{\rm / }show vtblprint &&set{\rm / }show print vtbl\cr +\cr +unset &&\rm(No longer an alias for delete)\cr +} +@end tex + +@node Installing _GDBN__, Copying, Renamed Commands, Top @appendix Installing _GDBN__ @cindex configuring _GDBN__ @cindex installation