From: Mike Frysinger <vapier@gentoo.org>
Date: Wed, 9 Jun 2021 22:05:25 +0000 (-0400)
Subject: sim: erc32: replace caddr_t with void*
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a80249d0a9da850e8971f45beb435ad4f154447d;p=binutils-gdb.git

sim: erc32: replace caddr_t with void*

This BSDism was never accepted into standards, so replace it with the
portable void* type instead.
---

diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog
index db089091d0f..311da252b6b 100644
--- a/sim/erc32/ChangeLog
+++ b/sim/erc32/ChangeLog
@@ -1,3 +1,11 @@
+2021-06-12  Mike Frysinger  <vapier@gentoo.org>
+
+	* erc32.c (uart_rx): Change caddr_t to void*.
+	(uart_intr): Likewise.
+	(wdog_intr): Likewise.
+	(rtc_intr): Likewise.
+	(gpt_intr): Likewise.
+
 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
 
 	* Makefile.in: Add $(EXEEXT) to sis.
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 747ac780b89..91f734c07db 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -272,17 +272,17 @@ static void	write_uart (uint32 addr, uint32 data);
 static void	flush_uart (void);
 static void	uarta_tx (void);
 static void	uartb_tx (void);
-static void	uart_rx (caddr_t arg);
-static void	uart_intr (caddr_t arg);
+static void	uart_rx (void *arg);
+static void	uart_intr (void *arg);
 static void	uart_irq_start (void);
-static void	wdog_intr (caddr_t arg);
+static void	wdog_intr (void *arg);
 static void	wdog_start (void);
-static void	rtc_intr (caddr_t arg);
+static void	rtc_intr (void *arg);
 static void	rtc_start (void);
 static uint32	rtc_counter_read (void);
 static void	rtc_scaler_set (uint32 val);
 static void	rtc_reload_set (uint32 val);
-static void	gpt_intr (caddr_t arg);
+static void	gpt_intr (void *arg);
 static void	gpt_start (void);
 static uint32	gpt_counter_read (void);
 static void	gpt_scaler_set (uint32 val);
@@ -1262,7 +1262,7 @@ uartb_tx(void)
 }
 
 static void
-uart_rx(caddr_t arg)
+uart_rx(void *arg)
 {
     int32           rsize;
     char            rxd;
@@ -1304,7 +1304,7 @@ uart_rx(caddr_t arg)
 }
 
 static void
-uart_intr(caddr_t arg)
+uart_intr(void *arg)
 {
     read_uart(0xE8);		/* Check for UART interrupts every 1000 clk */
     flush_uart();		/* Flush UART ports      */
@@ -1327,7 +1327,7 @@ uart_irq_start(void)
 /* Watch-dog */
 
 static void
-wdog_intr(caddr_t arg)
+wdog_intr(void *arg)
 {
     if (wdog_status == disabled) {
 	wdog_status = stopped;
@@ -1365,7 +1365,7 @@ wdog_start(void)
 
 
 static void
-rtc_intr(caddr_t arg)
+rtc_intr(void *arg)
 {
     if (rtc_counter == 0) {
 
@@ -1416,7 +1416,7 @@ rtc_reload_set(uint32 val)
 }
 
 static void
-gpt_intr(caddr_t arg)
+gpt_intr(void *arg)
 {
     if (gpt_counter == 0) {
 	mec_irq(12);