From: Suniel Mahesh Date: Sat, 29 Aug 2020 09:35:05 +0000 (+0530) Subject: configs/nanopi_m4: new defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a855cd8a719cbc41567e83680265dd8e74e2371c;p=buildroot.git configs/nanopi_m4: new defconfig A defconfig for the friendlyarm nanopi-m4 was added in 493c3979a4def978a1137cf8543bf0de50d2615e, but then removed in a24bd8936f57a590f810e14d7828cf1bddce580e because an ARM32 compiler was needed to build ATF, and this was not supported back then. Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced. Following new changes are introduced in comparision with the older changeset: - readme updated - GPT partition layout - update defconfig to build ATF - bump u-boot to 2020.07 - bump linux to 5.8.2 Signed-off-by: Suniel Mahesh Reviewed-by: Jagan Teki Signed-off-by: Arnout Vandecappelle (Essensium/Mind) [Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON] --- diff --git a/DEVELOPERS b/DEVELOPERS index dfe44a7042..d8cf58ee77 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2451,11 +2451,13 @@ F: package/powertop/ N: Suniel Mahesh F: board/firefly/ +F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/pine64/rockpro64 F: board/radxa/rockpi-4 F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 +F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig diff --git a/board/friendlyarm/nanopi-m4/extlinux.conf b/board/friendlyarm/nanopi-m4/extlinux.conf new file mode 100644 index 0000000000..fb24f09eb1 --- /dev/null +++ b/board/friendlyarm/nanopi-m4/extlinux.conf @@ -0,0 +1,4 @@ +label RK3399_NANOPI_M4 linux + kernel /Image + devicetree /rk3399-nanopi-m4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait diff --git a/board/friendlyarm/nanopi-m4/genimage.cfg b/board/friendlyarm/nanopi-m4/genimage.cfg new file mode 100644 index 0000000000..f14d493a9b --- /dev/null +++ b/board/friendlyarm/nanopi-m4/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-nanopi-m4.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopi-m4/post-build.sh b/board/friendlyarm/nanopi-m4/post-build.sh new file mode 100755 index 0000000000..ba29375c05 --- /dev/null +++ b/board/friendlyarm/nanopi-m4/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/friendlyarm/nanopi-m4/readme.txt b/board/friendlyarm/nanopi-m4/readme.txt new file mode 100644 index 0000000000..4a606cf97a --- /dev/null +++ b/board/friendlyarm/nanopi-m4/readme.txt @@ -0,0 +1,45 @@ +FriendlyARM NANOPI-M4 +===================== + +Build: + + $ make nanopi_m4_defconfig + $ make + +Files created in output directory +================================= + +output/images + +├── bl31.elf +├── boot.vfat +├── extlinux +├── idbloader.img +├── Image +├── rk3399-nanopi-m4.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +└── u-boot.itb + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device + +Serial console +-------------- + +Baudrate for this board is 1500000 + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/nanopi_m4.html diff --git a/configs/nanopi_m4_defconfig b/configs/nanopi_m4_defconfig new file mode 100644 index 0000000000..9c3f58f200 --- /dev/null +++ b/configs/nanopi_m4_defconfig @@ -0,0 +1,53 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-m4-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-m4" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="nanopi-m4" +BR2_TARGET_GENERIC_ISSUE="Welcome to NANOPI-M4" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m4/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-m4/post-build.sh"