From: Don Breazeal <donb@codesourcery.com>
Date: Mon, 14 Dec 2015 19:18:05 +0000 (-0800)
Subject: Target remote mode fork and exec test updates
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a8f077dc25b1732fb272a7ff10f72b5ca6f67b70;p=binutils-gdb.git

Target remote mode fork and exec test updates

This patch updates tests for fork and exec events in target remote mode.
In the majority of cases this was a simple matter of removing some code
that disabled the test for target remote.  In a few cases the test needed
to be disabled; in those cases the gdb_protocol was checked instead of
using the [is_remote target] etc.

In a couple of cases we needed to use clean_restart, since target remote
doesn't support the run command, and in one case we had to modify an expect
expression to allow for a "multiprocess-style" ptid.

Tested with the patch that implemented target remote mode fork and exec
event support.

gdb/testsuite/ChangeLog:

	* gdb.base/execl-update-breakpoints.exp (main): Enable for target
	remote.
	* gdb.base/foll-exec-mode.exp (main): Disable for target remote.
	* gdb.base/foll-exec.exp (main): Enable for target remote.
	* gdb.base/foll-fork.exp (main): Likewise.
	* gdb.base/foll-vfork.exp (main): Likewise.
	* gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
	(proc continue_to_exit_bp_loc): Use clean_restart.
	* gdb.base/pie-execl.exp (main): Disable for target remote.
	* gdb.base/watch-vfork.exp (main): Enable for target remote.
	* gdb.mi/mi-nsthrexec.exp (main): Likewise.
	* gdb.threads/execl.exp (main): Likewise.
	* gdb.threads/fork-child-threads.exp (main): Likewise.
	* gdb.threads/fork-plus-threads.exp (main): Disable for target
	remote.
	* gdb.threads/fork-thread-pending.exp (main): Enable for target
	remote.
	* gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
	pid.tid style ptids, instead of just tid.
	* gdb.threads/thread-execl.exp (main): Enable for target remote.
	* gdb.threads/watchpoint-fork.exp (main): Likewise.
	* gdb.trace/report.exp (use_collected_data): Allow pid.tid style
	ptids, instead of just tid.
---

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index df8c76833ad..f8e7084f66d 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,29 @@
+2015-12-11  Don Breazeal  <donb@codesourcery.com>
+
+	* gdb.base/execl-update-breakpoints.exp (main): Enable for target
+	remote.
+	* gdb.base/foll-exec-mode.exp (main): Disable for target remote.
+	* gdb.base/foll-exec.exp (main): Enable for target remote.
+	* gdb.base/foll-fork.exp (main): Likewise.
+	* gdb.base/foll-vfork.exp (main): Likewise.
+	* gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
+	(proc continue_to_exit_bp_loc): Use clean_restart.
+	* gdb.base/pie-execl.exp (main): Disable for target remote.
+	* gdb.base/watch-vfork.exp (main): Enable for target remote.
+	* gdb.mi/mi-nsthrexec.exp (main): Likewise.
+	* gdb.threads/execl.exp (main): Likewise.
+	* gdb.threads/fork-child-threads.exp (main): Likewise.
+	* gdb.threads/fork-plus-threads.exp (main): Disable for target
+	remote.
+	* gdb.threads/fork-thread-pending.exp (main): Enable for target
+	remote.
+	* gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
+	pid.tid style ptids, instead of just tid.
+	* gdb.threads/thread-execl.exp (main): Enable for target remote.
+	* gdb.threads/watchpoint-fork.exp (main): Likewise.
+	* gdb.trace/report.exp (use_collected_data): Allow pid.tid style
+	ptids, instead of just tid.
+
 2015-12-11  Andrew Burgess  <andrew.burgess@embecosm.com>
 
 	* gdb.base/list.exp (test_list_forward): Add end of file error
diff --git a/gdb/testsuite/gdb.base/execl-update-breakpoints.exp b/gdb/testsuite/gdb.base/execl-update-breakpoints.exp
index a9807914018..20d910116b6 100644
--- a/gdb/testsuite/gdb.base/execl-update-breakpoints.exp
+++ b/gdb/testsuite/gdb.base/execl-update-breakpoints.exp
@@ -16,12 +16,6 @@
 # Test that when following an exec, we don't try to insert breakpoints
 # in the new image at the addresses the symbols had before the exec.
 
-# Remote protocol does not support follow-exec notifications.
-
-if [is_remote target] {
-    continue
-}
-
 standard_testfile
 
 # Build two copies of the program, each linked at a different address.
diff --git a/gdb/testsuite/gdb.base/foll-exec-mode.exp b/gdb/testsuite/gdb.base/foll-exec-mode.exp
index ee193e22661..8a0a3a9323b 100644
--- a/gdb/testsuite/gdb.base/foll-exec-mode.exp
+++ b/gdb/testsuite/gdb.base/foll-exec-mode.exp
@@ -26,8 +26,11 @@
 # be a breakpoint in order to stop after the exec, even if we use
 # a single-step command to execute past the exec.
 
-if { [is_remote target] || ![isnative] } then {
-     continue
+# Remote mode doesn't support the 'run' command, which is
+# required for follow-exec-mode testing.
+if { [target_info exists gdb_protocol]
+     && [target_info gdb_protocol] == "remote" } {
+    continue
 }
 
 # Until "catch exec" is implemented on other targets...
diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp
index 0a6347c82fd..a36f212e81f 100644
--- a/gdb/testsuite/gdb.base/foll-exec.exp
+++ b/gdb/testsuite/gdb.base/foll-exec.exp
@@ -16,10 +16,6 @@
 # This is a test of gdb's ability to follow a process through a
 # Unix exec() system call.
 
-if { [is_remote target] || ![isnative] } then {
-    continue
-}
-
 # Until "catch exec" is implemented on other targets...
 #
 if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
diff --git a/gdb/testsuite/gdb.base/foll-fork.exp b/gdb/testsuite/gdb.base/foll-fork.exp
index 59939731ec2..51e6a7a2dc5 100644
--- a/gdb/testsuite/gdb.base/foll-fork.exp
+++ b/gdb/testsuite/gdb.base/foll-fork.exp
@@ -13,10 +13,6 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-if { [is_remote target] || ![isnative] } then {
-    continue
-}
-
 # Until "set follow-fork-mode" and "catch fork" are implemented on
 # other targets...
 #
diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp
index 82922d82a95..0659509776f 100644
--- a/gdb/testsuite/gdb.base/foll-vfork.exp
+++ b/gdb/testsuite/gdb.base/foll-vfork.exp
@@ -18,10 +18,6 @@
 # either execs or exits --- since those events take somewhat different
 # code paths in GDB, both variants are exercised.
 
-if { [is_remote target] || ![isnative] } then {
-    continue
-}
-
 # Until "set follow-fork-mode" and "catch vfork" are implemented on
 # other targets...
 #
diff --git a/gdb/testsuite/gdb.base/multi-forks.exp b/gdb/testsuite/gdb.base/multi-forks.exp
index 2b0b81d50a7..cb1464d8990 100644
--- a/gdb/testsuite/gdb.base/multi-forks.exp
+++ b/gdb/testsuite/gdb.base/multi-forks.exp
@@ -13,10 +13,6 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-if { [is_remote target] || ![isnative] } then {
-    continue
-}
-
 # Until "set follow-fork-mode" and "catch fork" are implemented on
 # other targets...
 #
@@ -111,6 +107,7 @@ proc continue_to_exit_bp_loc {} {
 # First set gdb to follow the child.
 # The result should be that each of the 4 forks returns zero.
 
+clean_restart ${binfile}
 runto_main
 gdb_test_no_output "set follow-fork child"
 continue_to_exit_bp_loc
@@ -120,6 +117,7 @@ gdb_test "print pids" "\\$.* = \\{0, 0, 0, 0\\}.*" "follow child, print pids"
 # Now set gdb to follow the parent.
 # Result should be that none of the 4 forks returns zero.
 
+clean_restart ${binfile}
 runto_main
 gdb_test_no_output "set follow-fork parent" ""
 continue_to_exit_bp_loc
diff --git a/gdb/testsuite/gdb.base/pie-execl.exp b/gdb/testsuite/gdb.base/pie-execl.exp
index 51edc821df2..f75c4dc3efb 100644
--- a/gdb/testsuite/gdb.base/pie-execl.exp
+++ b/gdb/testsuite/gdb.base/pie-execl.exp
@@ -23,10 +23,12 @@ if ![istarget *-linux*] {
     continue
 }
 
-# Remote protocol does not support follow-exec notifications.
-
-if [is_remote target] {
-    continue
+# In remote mode we cannot use the 'set args' command, and this
+# test requires it.
+if { [target_info exists gdb_protocol] } then {
+    if { [target_info gdb_protocol] == "remote" } then {
+	continue
+    }
 }
 
 standard_testfile .c
diff --git a/gdb/testsuite/gdb.base/watch-vfork.exp b/gdb/testsuite/gdb.base/watch-vfork.exp
index 9b43ac6d301..67ff1c23823 100644
--- a/gdb/testsuite/gdb.base/watch-vfork.exp
+++ b/gdb/testsuite/gdb.base/watch-vfork.exp
@@ -15,11 +15,6 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# There's no support for vfork events in the remote protocol.
-if { [is_remote target] } {
-    return 0
-}
-
 standard_testfile .c
 
 if { [build_executable ${testfile}.exp ${testfile} $srcfile {debug}] } {
diff --git a/gdb/testsuite/gdb.mi/mi-nsthrexec.exp b/gdb/testsuite/gdb.mi/mi-nsthrexec.exp
index 9ba77394da1..d55a156ddf5 100644
--- a/gdb/testsuite/gdb.mi/mi-nsthrexec.exp
+++ b/gdb/testsuite/gdb.mi/mi-nsthrexec.exp
@@ -18,11 +18,6 @@
 # the main thread doesn't just silently stop at the first internal
 # breakpoint (usually the _dl_debug_state breakpoint).
 
-# No exec event support in the remote protocol.
-if { [is_remote target] } then {
-    continue
-}
-
 if { ![support_displaced_stepping] } { 
     unsupported "displaced stepping"
     return -1
diff --git a/gdb/testsuite/gdb.threads/execl.exp b/gdb/testsuite/gdb.threads/execl.exp
index b86b61281df..92e3e819a3b 100644
--- a/gdb/testsuite/gdb.threads/execl.exp
+++ b/gdb/testsuite/gdb.threads/execl.exp
@@ -15,10 +15,6 @@
 
 # Test handling of threads across an execl.
 
-if { [is_remote target] } then {
-    continue
-}
-
 # Original image, loads a thread library.
 standard_testfile
 
diff --git a/gdb/testsuite/gdb.threads/fork-child-threads.exp b/gdb/testsuite/gdb.threads/fork-child-threads.exp
index 75e60e1a9a2..7c527537d88 100644
--- a/gdb/testsuite/gdb.threads/fork-child-threads.exp
+++ b/gdb/testsuite/gdb.threads/fork-child-threads.exp
@@ -18,10 +18,6 @@ if { ! [istarget "*-*-linux*"] } {
     return 0
 }
 
-if { [is_remote target] || ![isnative] } then {
-    return 0
-}
-
 standard_testfile
 
 if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
diff --git a/gdb/testsuite/gdb.threads/fork-plus-threads.exp b/gdb/testsuite/gdb.threads/fork-plus-threads.exp
index 2b34b6c3886..fe88a5187e8 100644
--- a/gdb/testsuite/gdb.threads/fork-plus-threads.exp
+++ b/gdb/testsuite/gdb.threads/fork-plus-threads.exp
@@ -20,6 +20,13 @@
 #
 # See https://sourceware.org/bugzilla/show_bug.cgi?id=18600
 
+# In remote mode, we cannot continue debugging after all
+# inferiors have terminated, and this test requires that.
+if { [target_info exists gdb_protocol]
+     && [target_info gdb_protocol] == "remote" } {
+    continue
+}
+
 standard_testfile
 
 proc do_test { detach_on_fork } {
diff --git a/gdb/testsuite/gdb.threads/fork-thread-pending.exp b/gdb/testsuite/gdb.threads/fork-thread-pending.exp
index d2292324150..ad8adad7f04 100644
--- a/gdb/testsuite/gdb.threads/fork-thread-pending.exp
+++ b/gdb/testsuite/gdb.threads/fork-thread-pending.exp
@@ -13,12 +13,6 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# There's no support for `set follow-fork-mode' in the remote
-# protocol.
-if { [is_remote target] } {
-    return 0
-}
-
 # Only GNU/Linux is known to support `set follow-fork-mode child'.
 #
 if { ! [istarget "*-*-linux*"] } {
diff --git a/gdb/testsuite/gdb.threads/linux-dp.exp b/gdb/testsuite/gdb.threads/linux-dp.exp
index a089cac4e6f..49ff1f755c0 100644
--- a/gdb/testsuite/gdb.threads/linux-dp.exp
+++ b/gdb/testsuite/gdb.threads/linux-dp.exp
@@ -64,7 +64,7 @@ for {set i 0} {$i < 5} {incr i} {
 	-re "^ *Id.*Frame *\[\r\n\]+" {
 	    exp_continue
 	}
-	-re "^. +(\[0-9\]+ *Thread \[-0-9a-fx\]+) \[^\n\]*\n" {
+	-re "^. +(\[0-9\]+ *Thread \[-0-9a-fx.\]+) \[^\n\]*\n" {
 	    verbose -log "found thread $expect_out(1,string)" 2
 	    lappend threads_before $expect_out(1,string)
 	    exp_continue
@@ -126,7 +126,7 @@ for {set i 0} {$i < 5} {incr i} {
 	-re "^ *Id.*Frame *\[\r\n\]+" {
 	    exp_continue
 	}
-	-re "^. +(\[0-9\]+ *Thread \[-0-9a-fx\]+) \[^\n\]*\n" {
+	-re "^. +(\[0-9\]+ *Thread \[-0-9a-fx.\]+) \[^\n\]*\n" {
 	    set name $expect_out(1,string)
 	    for {set j 0} {$j != [llength $threads_before] } {incr j} {
 		if {$name == [lindex $threads_before $j]} {
diff --git a/gdb/testsuite/gdb.threads/thread-execl.exp b/gdb/testsuite/gdb.threads/thread-execl.exp
index a598ad07ec5..8df6a153f18 100644
--- a/gdb/testsuite/gdb.threads/thread-execl.exp
+++ b/gdb/testsuite/gdb.threads/thread-execl.exp
@@ -16,11 +16,6 @@
 # Test that GDB doesn't get stuck when stepping over an exec call done
 # by a thread other than the main thread.
 
-# There's no support for exec events in the remote protocol.
-if { [is_remote target] } {
-    return 0
-}
-
 standard_testfile
 
 if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" \
diff --git a/gdb/testsuite/gdb.threads/watchpoint-fork.exp b/gdb/testsuite/gdb.threads/watchpoint-fork.exp
index a4557f80a2a..2fd15172555 100644
--- a/gdb/testsuite/gdb.threads/watchpoint-fork.exp
+++ b/gdb/testsuite/gdb.threads/watchpoint-fork.exp
@@ -17,11 +17,6 @@
 
 set testfile watchpoint-fork
 
-if [is_remote target] {
-    kfail "remote/13584" "gdbserver does not support debugging across fork"
-    return
-}
-
 proc test {type symbol} {
     with_test_prefix "$type" {
 	global testfile subdir srcdir gdb_prompt
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
index 53ea943421b..28bf715b8d7 100644
--- a/gdb/testsuite/gdb.trace/report.exp
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -386,7 +386,7 @@ proc use_collected_data { data_source } {
 
 	# There is always a thread of an inferior, either a live one or
 	# a faked one.
-	gdb_test "info threads" "\\* ${decimal}    (process|Thread) ${decimal}\[ \t\].*"
+	gdb_test "info threads" "\\* ${decimal}    (process|Thread) \[0-9\.\]+\[ \t\].*"
 	gdb_test "info inferiors" "\\* 1    process ${decimal} \[ \t\]+${binfile}.*"
     }
 }