From: Thiago Jung Bauermann Date: Thu, 5 May 2011 22:52:10 +0000 (+0000) Subject: Demote to sw watchpoint only in update_watchpoint. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=a9634178ec86f946598bd78836513c621afd4954;p=binutils-gdb.git Demote to sw watchpoint only in update_watchpoint. * breakpoint.c (update_watchpoint): Change between software and hardware watchpoint for all kinds of watchpoints, not just read/write ones. Determine b->exact value here instead of in watch_command_1. Error out if there are not enough resources for a read or access hardware watchpoint. (watch_command_1): Remove logic of checking whether there are enough resources available, since update_watchpoint will do that work now. Don't set b->exact here. Catch exceptions thrown by update_watchpoint and delete the watchpoint. (can_use_hardware_watchpoint): Remove exact_watchpoints argument. Use target_exact_watchpoints instead. (delete_breakpoint): Notify observers only if deleted watchpoint has a breakpoint number assigned to it. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index df26b1f198e..98b5fb828b5 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,20 @@ +2011-05-05 Thiago Jung Bauermann + + Demote to sw watchpoint only in update_watchpoint. + * breakpoint.c (update_watchpoint): Change between software and + hardware watchpoint for all kinds of watchpoints, not just + read/write ones. Determine b->exact value here instead of + in watch_command_1. Error out if there are not enough resources + for a read or access hardware watchpoint. + (watch_command_1): Remove logic of checking whether there are + enough resources available, since update_watchpoint will do that + work now. Don't set b->exact here. Catch exceptions thrown by + update_watchpoint and delete the watchpoint. + (can_use_hardware_watchpoint): Remove exact_watchpoints argument. + Use target_exact_watchpoints instead. + (delete_breakpoint): Notify observers only if deleted watchpoint + has a breakpoint number assigned to it. + 2011-05-05 Janis Johnson * MAINTAINERS: Add myself as a write-after-approval maintainer. diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c index d8eb891abc7..b5fc44865a4 100644 --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -101,7 +101,7 @@ static void clear_command (char *, int); static void catch_command (char *, int); -static int can_use_hardware_watchpoint (struct value *, int); +static int can_use_hardware_watchpoint (struct value *); static void break_command_1 (char *, int, int); @@ -1404,19 +1404,22 @@ update_watchpoint (struct breakpoint *b, int reparse) an ordinary watchpoint depending on the hardware support and free hardware slots. REPARSE is set when the inferior is started. */ - if ((b->type == bp_watchpoint || b->type == bp_hardware_watchpoint) - && reparse) + if (reparse) { int reg_cnt; enum bp_loc_type loc_type; struct bp_location *bl; - reg_cnt = can_use_hardware_watchpoint (val_chain, b->exact); + reg_cnt = can_use_hardware_watchpoint (val_chain); if (reg_cnt) { int i, target_resources_ok, other_type_used; + /* Use an exact watchpoint when there's only one memory region to be + watched, and only one debug register is needed to watch it. */ + b->exact = target_exact_watchpoints && reg_cnt == 1; + /* We need to determine how many resources are already used for all other hardware watchpoints plus this one to see if we still have enough resources to also fit @@ -1424,16 +1427,29 @@ update_watchpoint (struct breakpoint *b, int reparse) hw_watchpoint_used_count call below counts this watchpoint, make sure that it is marked as a hardware watchpoint. */ - b->type = bp_hardware_watchpoint; - - i = hw_watchpoint_used_count (bp_hardware_watchpoint, - &other_type_used); + if (b->type == bp_watchpoint) + b->type = bp_hardware_watchpoint; + i = hw_watchpoint_used_count (b->type, &other_type_used); target_resources_ok = target_can_use_hardware_watchpoint - (bp_hardware_watchpoint, i, other_type_used); + (b->type, i, other_type_used); if (target_resources_ok <= 0) - b->type = bp_watchpoint; + { + if (target_resources_ok == 0 + && b->type != bp_hardware_watchpoint) + error (_("Target does not support this type of " + "hardware watchpoint.")); + else if (target_resources_ok < 0 + && b->type != bp_hardware_watchpoint) + error (_("Target can only support one kind " + "of HW watchpoint at a time.")); + else + b->type = bp_watchpoint; + } } + else if (b->type != bp_hardware_watchpoint) + error (_("Expression cannot be implemented with " + "read/access watchpoint.")); else b->type = bp_watchpoint; @@ -8783,6 +8799,7 @@ static void watch_command_1 (char *arg, int accessflag, int from_tty, int just_location, int internal) { + volatile struct gdb_exception e; struct breakpoint *b, *scope_breakpoint = NULL; struct expression *exp; struct block *exp_valid_block = NULL, *cond_exp_valid_block = NULL; @@ -8794,9 +8811,7 @@ watch_command_1 (char *arg, int accessflag, int from_tty, int toklen; char *cond_start = NULL; char *cond_end = NULL; - int i, other_type_used, target_resources_ok = 0; enum bptype bp_type; - int reg_cnt = 0; int thread = -1; int pc = 0; @@ -8926,28 +8941,6 @@ watch_command_1 (char *arg, int accessflag, int from_tty, else bp_type = bp_hardware_watchpoint; - reg_cnt = can_use_hardware_watchpoint (val, target_exact_watchpoints); - if (reg_cnt == 0 && bp_type != bp_hardware_watchpoint) - error (_("Expression cannot be implemented with read/access watchpoint.")); - if (reg_cnt != 0) - { - i = hw_watchpoint_used_count (bp_type, &other_type_used); - target_resources_ok = - target_can_use_hardware_watchpoint (bp_type, i + reg_cnt, - other_type_used); - if (target_resources_ok == 0 && bp_type != bp_hardware_watchpoint) - error (_("Target does not support this type of hardware watchpoint.")); - - if (target_resources_ok < 0 && bp_type != bp_hardware_watchpoint) - error (_("Target can only support one kind " - "of HW watchpoint at a time.")); - } - - /* Change the type of breakpoint to an ordinary watchpoint if a - hardware watchpoint could not be set. */ - if (!reg_cnt || target_resources_ok <= 0) - bp_type = bp_watchpoint; - frame = block_innermost_frame (exp_valid_block); /* If the expression is "local", then set up a "watchpoint scope" @@ -8985,7 +8978,6 @@ watch_command_1 (char *arg, int accessflag, int from_tty, /* Now set up the breakpoint. */ b = set_raw_breakpoint_without_location (NULL, bp_type); - set_breakpoint_number (internal, b); b->thread = thread; b->disposition = disp_donttouch; b->exp = exp; @@ -9016,10 +9008,6 @@ watch_command_1 (char *arg, int accessflag, int from_tty, b->val_valid = 1; b->ops = &watchpoint_breakpoint_ops; - /* Use an exact watchpoint when there's only one memory region to be - watched, and only one debug register is needed to watch it. */ - b->exact = target_exact_watchpoints && reg_cnt == 1; - if (cond_start) b->cond_string = savestring (cond_start, cond_end - cond_start); else @@ -9047,12 +9035,22 @@ watch_command_1 (char *arg, int accessflag, int from_tty, if (!just_location) value_free_to_mark (mark); - /* Finally update the new watchpoint. This creates the locations - that should be inserted. */ - update_watchpoint (b, 1); + TRY_CATCH (e, RETURN_MASK_ALL) + { + /* Finally update the new watchpoint. This creates the locations + that should be inserted. */ + update_watchpoint (b, 1); + } + if (e.reason < 0) + { + delete_breakpoint (b); + throw_exception (e); + } + + set_breakpoint_number (internal, b); /* Do not mention breakpoints with a negative number, but do - notify observers. */ + notify observers. */ if (!internal) mention (b); observer_notify_breakpoint_created (b); @@ -9061,14 +9059,10 @@ watch_command_1 (char *arg, int accessflag, int from_tty, } /* Return count of debug registers needed to watch the given expression. - If EXACT_WATCHPOINTS is 1, then consider that only the address of - the start of the watched region will be monitored (i.e., all accesses - will be aligned). This uses less debug registers on some targets. - If the watchpoint cannot be handled in hardware return zero. */ static int -can_use_hardware_watchpoint (struct value *v, int exact_watchpoints) +can_use_hardware_watchpoint (struct value *v) { int found_memory_cnt = 0; struct value *head = v; @@ -9124,7 +9118,7 @@ can_use_hardware_watchpoint (struct value *v, int exact_watchpoints) int len; int num_regs; - len = (exact_watchpoints + len = (target_exact_watchpoints && is_scalar_type_recursive (vtype))? 1 : TYPE_LENGTH (value_type (v)); @@ -10483,7 +10477,12 @@ delete_breakpoint (struct breakpoint *bpt) bpt->related_breakpoint = bpt; } - observer_notify_breakpoint_deleted (bpt); + /* watch_command_1 creates a watchpoint but only sets its number if + update_watchpoint succeeds in creating its bp_locations. If there's + a problem in that process, we'll be asked to delete the half-created + watchpoint. In that case, don't announce the deletion. */ + if (bpt->number) + observer_notify_breakpoint_deleted (bpt); if (breakpoint_chain == bpt) breakpoint_chain = bpt->next;