From: lkcl <lkcl@web>
Date: Fri, 19 May 2023 19:11:14 +0000 (+0100)
Subject: (no commit message)
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=aa980c783ebe66b8053ab35871f06d1c97f0b7e2;p=libreriscv.git

---

diff --git a/openpower/sv/rfc/ls009.mdwn b/openpower/sv/rfc/ls009.mdwn
index 55ca413cb..7718c87df 100644
--- a/openpower/sv/rfc/ls009.mdwn
+++ b/openpower/sv/rfc/ls009.mdwn
@@ -204,7 +204,8 @@ An in-depth analysis showed that it is possible to do in-place in-register
 DCT and FFT as long as twin-result "butterfly" instructions are provided.
 These can be found in the [[openpower/isa/svfparith]] page if performing
 IEEE754 FP transforms. *(For fixed-point transforms, equivalent 3-in 2-out
-integer operations would be required)*. These "butterfly" instructions
+integer operations would be required,
+currently under development)*. These "butterfly" instructions
 avoid the need for a temporary register because the two array positions
 being overwritten will be "in-flight" in any In-Order or Out-of-Order
 micro-architecture.