From: Stephan Hoffmann <sho@relinux.de>
Date: Sat, 17 Mar 2012 09:46:55 +0000 (+0100)
Subject: Microblaze: build kernel with device tree
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=aaed42d15643e0cb64c96fa400a6097a19d19ef4;p=buildroot.git

Microblaze: build kernel with device tree

This patch adds the options needed to build the SimpleImage containing
the device tree structure needed for the Microblaze architecture.

Handling Device Tree and SimpleImage will be handled in a general way
in the future.

I provide this patch to be able to build the system in the meantime.

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---

diff --git a/linux/Config.in b/linux/Config.in
index b89fcdc9db..a7fa89f1f4 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -120,6 +120,14 @@ config BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
 	help
 	  Path to the kernel configuration file
 
+config BR2_LINUX_KERNEL_DTS_FILE
+    string "Device Tree dts file location"
+    depends on BR2_microblaze
+    help
+      Path from where the dts file has to be copied
+      The final "custom target" name depends on the
+      dts file name:
+          <name>.dts --> simpleImage.<name>
 #
 # Binary format
 #
diff --git a/linux/linux.mk b/linux/linux.mk
index 58cbe8e925..c0334d2b7e 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -117,6 +117,18 @@ endef
 
 LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
 
+ifeq ($(KERNEL_ARCH),microblaze)
+# on microblaze, we always want mkimage
+LINUX_DEPENDENCIES+=host-uboot-tools
+
+define LINUX_COPY_DTS
+    if test -f "$(BR2_LINUX_KERNEL_DTS_FILE)" ; then \
+        cp $(BR2_LINUX_KERNEL_DTS_FILE) $(@D)/arch/microblaze/boot/dts ; \
+    else \
+        echo "Cannot copy dts file!" ; \
+    fi
+endef
+endif
 
 ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
 KERNEL_SOURCE_CONFIG = $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
@@ -131,6 +143,8 @@ define LINUX_CONFIGURE_CMDS
 	$(if $(BR2_ARM_EABI),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config),
 		$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config))
+    $(if $(BR2_microblaze),
+        $(call LINUX_COPY_DTS))
 	# As the kernel gets compiled before root filesystems are
 	# built, we create a fake cpio file. It'll be
 	# replaced later by the real cpio archive, and the kernel will be
@@ -215,6 +229,8 @@ $(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LI
 	$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
 	# Copy the kernel image to its final destination
 	cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
+	# If there is a .ub file copy it to the final destination
+	test -f $(LINUX_IMAGE_PATH).ub && cp $(LINUX_IMAGE_PATH).ub $(BINARIES_DIR)
 	$(Q)touch $@
 
 # The initramfs building code must make sure this target gets called