From: Andrew Burgess Date: Mon, 21 Nov 2022 17:12:10 +0000 (-0500) Subject: gdb/testsuite: refactor gdb.threads/detach-step-over.exp X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=acc175a6b3bf6dfefde88fac78e34ac0625343c6;p=binutils-gdb.git gdb/testsuite: refactor gdb.threads/detach-step-over.exp Factor out some bits of gdb.threads/detach-step-over.exp to procs in preparation to adding some new variations of the test. Rename the existing "test" proc and make it use proc_with_prefix. Co-Authored-By: Simon Marchi Change-Id: Ib4412545c81c8556029e0f7bfa9dd48d7a9f3189 --- diff --git a/gdb/testsuite/gdb.threads/detach-step-over.exp b/gdb/testsuite/gdb.threads/detach-step-over.exp index 917be2ef378..ad9b08f549e 100644 --- a/gdb/testsuite/gdb.threads/detach-step-over.exp +++ b/gdb/testsuite/gdb.threads/detach-step-over.exp @@ -56,11 +56,11 @@ standard_testfile set bp_lineno [gdb_get_line_number "Set breakpoint here"] -# The test proper. See description above. -proc test {condition_eval target_non_stop non_stop displaced} { - # Number of threads started by the program. - set n_threads 10 +# Number of threads started by the program. +set n_threads 10 +# Start GDB, configuring various settings according to the arguments. +proc start_gdb_for_test {condition_eval target_non_stop non_stop displaced} { save_vars { ::GDBFLAGS } { append ::GDBFLAGS " -ex \"maint set target-non-stop $target_non_stop\"" append ::GDBFLAGS " -ex \"set non-stop $non_stop\"" @@ -69,10 +69,137 @@ proc test {condition_eval target_non_stop non_stop displaced} { clean_restart $::binfile } + gdb_test_no_output "set breakpoint condition-evaluation $condition_eval" +} + +# Use the 'attach' command to attach to process with pid TESTPID. Return true +# if we believe GDB has attached and we are back at the GDB prompt, otherwise, +# return false. +proc attach_to {testpid} { + with_timeout_factor 2 { + set attached 0 + set saw_attaching 0 + gdb_test_multiple "attach $testpid" "attach" { + -re "Attaching to program.*process $testpid\r\n" { + set saw_attaching 1 + exp_continue + } + -re "new threads in iteration" { + # Seen when "set debug libthread_db" is on. + exp_continue + } + -re "Reading symbols from|Expanding full symbols from" { + # Prevent -readnow timeout. + exp_continue + } + -re "is a zombie - the process has already terminated.*$::gdb_prompt " { + fail $gdb_test_name + } + -re "Unable to attach: .*$::gdb_prompt " { + fail $gdb_test_name + } + -re "\r\n$::gdb_prompt " { + if { $saw_attaching } { + set attached 1 + pass $gdb_test_name + } else { + fail $gdb_test_name + } + } + } + } + + return $attached +} + +# After attaching to a multi-threaded inferior in non-stop mode, we expect to +# see a stop message from each thread. This proc waits for all of these stop +# messages. TID_RE is a regexp used to match the thread-id of the stopped +# thread. +# +# Return true if we saw a stop from each of the expected threads (based on the +# global N_THREADS value), otherwise, return false. +proc check_stops_after_non_stop_attach {tid_re} { + set any "\[^\r\n\]*" + + # In non-stop, we will see one stop per thread after the prompt. + set stops 0 + set test "seen all stops" + for {set thread 1} { $thread <= $::n_threads } { incr thread } { + if {[gdb_test_multiple "" $test { + -re "Thread ${tid_re} ${any} stopped" { + incr stops + } + }] != 0} { + break + } + } + + # If we haven't seen all stops, then the + # gdb_test_multiple in the loop above will have + # already issued a FAIL. + if {$stops != $::n_threads} { + return false + } + pass $test + return true +} + +# Prepare for a single test iteration. TESTPID is the pid of the process GDB +# will be attached too. NON_STOP indicates if GDB is configured in non-stop +# mode or not. ATTEMPT is the current attempt number, and ATTEMPTS is the +# maximum number of attempts we plan to run. TID_RE is a string used to match +# against a thread-id in GDB's stop messages. +# +# Return true if everything is prepared correctly, otherwise return false. +proc prepare_test_iter {testpid non_stop attempt attempts tid_re} { + if {![attach_to $testpid]} { + return false + } + + if {$non_stop} { + if {![check_stops_after_non_stop_attach $tid_re]} { + return false + } + } + + gdb_test "break ${::srcfile}:${::bp_lineno} if 0" "Breakpoint.*" \ + "break LOC if 0" + + if {$attempt < $attempts} { + # Kick the time out timer for another round. + gdb_test "print again = 1" " = 1" "reset timer in the inferior" + # Show the time we had left in the logs, in case + # something goes wrong. + gdb_test "print seconds_left" " = .*" + } + + if {$non_stop} { + set cont_cmd "continue -a &" + } else { + set cont_cmd "continue &" + } + + set cont_cmd_re [string_to_regexp $cont_cmd] + gdb_test_multiple $cont_cmd "" { + -re "^$cont_cmd_re\r\nContinuing\.\r\n$::gdb_prompt " { + pass $gdb_test_name + } + } + + # Wait a bit, to give time for the threads to hit the + # breakpoint. + sleep 1 + + return true +} + +# The test proper. See the description at the top of the file. +proc_with_prefix test_detach_command {condition_eval target_non_stop non_stop displaced} { set test_spawn_id [spawn_wait_for_attach $::binfile] set testpid [spawn_id_get_pid $test_spawn_id] - set any "\[^\r\n\]*" + start_gdb_for_test $condition_eval $target_non_stop $non_stop $displaced gdb_test "add-inferior" "Added inferior 2.*" gdb_test "inferior 2" "Switching to .*" @@ -84,8 +211,6 @@ proc test {condition_eval target_non_stop non_stop displaced} { return } - gdb_test_no_output "set breakpoint condition-evaluation $condition_eval" - # Get the PID of the test process. set pid_inf2 "" gdb_test_multiple "p mypid" "get pid of inferior 2" { @@ -100,101 +225,12 @@ proc test {condition_eval target_non_stop non_stop displaced} { with_test_prefix "iter $attempt" { gdb_test "inferior 1" "Switching to .*" - with_timeout_factor 2 { - set attached 0 - set saw_attaching 0 - set eperm 0 - set test "attach" - gdb_test_multiple "attach $testpid" $test { - -re "Attaching to program.*process $testpid\r\n" { - set saw_attaching 1 - exp_continue - } - -re "new threads in iteration" { - # Seen when "set debug libthread_db" is on. - exp_continue - } - -re "Reading symbols from|Expanding full symbols from" { - # Prevent -readnow timeout. - exp_continue - } - -re "is a zombie - the process has already terminated.*$::gdb_prompt " { - fail $gdb_test_name - } - -re "Unable to attach: .*$::gdb_prompt " { - fail $gdb_test_name - } - -re "\r\n$::gdb_prompt " { - if { $saw_attaching } { - set attached 1 - pass $test - } else { - fail $test - } - } - } - } - - if {!$attached} { + if {![prepare_test_iter $testpid $non_stop \ + $attempt $attempts "$::decimal\.$::decimal"]} { kill_wait_spawned_process $test_spawn_id return } - if {$non_stop} { - # In non-stop, we will see one stop per thread after - # the prompt. - set stops 0 - set tid_re "$::decimal\.$::decimal" - set test "seen all stops" - for {set thread 1} { $thread <= $n_threads } { incr thread } { - if {[gdb_test_multiple "" $test { - -re "Thread ${tid_re} ${any} stopped" { - incr stops - } - }] != 0} { - break - } - } - - # If we haven't seen all stops, then the - # gdb_test_multiple in the loop above will have - # already issued a FAIL. - if {$stops != $n_threads} { - kill_wait_spawned_process $test_spawn_id - return - } - pass $test - } - - # Set threads stepping over a breakpoint continuously. - gdb_test "break $::srcfile:$::bp_lineno if 0" "Breakpoint.*" \ - "break LOC if 0" - - if {$attempt < $attempts} { - # Kick the time out timer for another round. - gdb_test "print again = 1" " = 1" "reset timer in the inferior" - # Show the time we had left in the logs, in case - # something goes wrong. - gdb_test "print seconds_left" " = .*" - } - - if {$non_stop} { - set cont_cmd "continue -a &" - } else { - set cont_cmd "continue &" - } - - set cont_cmd_re [string_to_regexp $cont_cmd] - gdb_test_multiple $cont_cmd "" { - -re "^$cont_cmd_re\r\nContinuing\.\r\n$::gdb_prompt " { - pass $gdb_test_name - } - } - - # Wait a bit, to give time for the threads to hit the - # breakpoint. - sleep 1 - set running_count 0 set interrupted 0 gdb_test_multiple "info threads" "all threads running" { @@ -219,7 +255,8 @@ proc test {condition_eval target_non_stop non_stop displaced} { } } -re "$::gdb_prompt $" { - gdb_assert {$running_count == ($n_threads + 1) * 2} $gdb_test_name + gdb_assert {$running_count == ($::n_threads + 1) * 2} \ + $gdb_test_name } } @@ -292,7 +329,8 @@ foreach_with_prefix breakpoint-condition-evaluation {"host" "target"} { } foreach_with_prefix displaced {"off" "auto"} { - test ${breakpoint-condition-evaluation} ${target-non-stop} ${non-stop} ${displaced} + test_detach_command ${breakpoint-condition-evaluation} \ + ${target-non-stop} ${non-stop} ${displaced} } } }