From: Pedro Alves Date: Wed, 30 May 2012 19:31:44 +0000 (+0000) Subject: 2012-05-30 Jeff Kenton X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ade64f0e04453fd42382505da8c1cbf6300e75d4;p=binutils-gdb.git 2012-05-30 Jeff Kenton * Makefile.in (ALL_TARGET_OBJS): Add tilegx-tdep.o and tilegx-linux-tdep.o. (ALLDEPFILES): Add tilegx-linux-nat.c, tilegx-tdep.c and tilegx-linux-tdep.c. * configure.tgt: Handle tilegx-*-linux*. * tilegx-tdep.h: New file. * tilegx-tdep.c: New file. * tilegx-linux-tdep.c: New file. * regformats/reg-tilegx.dat: New file. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 14b0b7aa875..fac4c9b7a56 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,15 @@ +2012-05-30 Jeff Kenton + + * Makefile.in (ALL_TARGET_OBJS): Add tilegx-tdep.o and + tilegx-linux-tdep.o. + (ALLDEPFILES): Add tilegx-linux-nat.c, tilegx-tdep.c and + tilegx-linux-tdep.c. + * configure.tgt: Handle tilegx-*-linux*. + * tilegx-tdep.h: New file. + * tilegx-tdep.c: New file. + * tilegx-linux-tdep.c: New file. + * regformats/reg-tilegx.dat: New file. + 2012-05-30 Edjunior Machado * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): fix diff --git a/gdb/Makefile.in b/gdb/Makefile.in index b636045a202..bf6b0da169c 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -566,6 +566,7 @@ ALL_TARGET_OBS = \ sparc-sol2-tdep.o sparc-tdep.o \ spu-tdep.o spu-multiarch.o solib-spu.o \ tic6x-tdep.o tic6x-linux-tdep.o \ + tilegx-tdep.o tilegx-linux-tdep.o \ v850-tdep.o \ vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \ xstormy16-tdep.o \ @@ -1498,6 +1499,7 @@ ALLDEPFILES = \ sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \ sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \ spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \ + tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \ v850-tdep.c \ vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \ windows-nat.c windows-tdep.c \ diff --git a/gdb/configure.tgt b/gdb/configure.tgt index 19c990ed5eb..7e2f9db7055 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -552,6 +552,12 @@ tic6x-*-*) gdb_target_obs="tic6x-tdep.o" ;; +tilegx-*-linux*) + # Target: TILE-Gx + gdb_target_obs="tilegx-tdep.o tilegx-linux-tdep.o solib-svr4.o \ + symfile-mem.o glibc-tdep.o linux-tdep.o" + ;; + xstormy16-*-*) # Target: Sanyo Xstormy16a processor gdb_target_obs="xstormy16-tdep.o" diff --git a/gdb/regformats/reg-tilegx.dat b/gdb/regformats/reg-tilegx.dat new file mode 100644 index 00000000000..fc971f9996e --- /dev/null +++ b/gdb/regformats/reg-tilegx.dat @@ -0,0 +1,67 @@ +name:tile +expedite:sp,lr,pc +64:r0 +64:r1 +64:r2 +64:r3 +64:r4 +64:r5 +64:r6 +64:r7 +64:r8 +64:r9 +64:r10 +64:r11 +64:r12 +64:r13 +64:r14 +64:r15 +64:r16 +64:r17 +64:r18 +64:r19 +64:r20 +64:r21 +64:r22 +64:r23 +64:r24 +64:r25 +64:r26 +64:r27 +64:r28 +64:r29 +64:r30 +64:r31 +64:r32 +64:r33 +64:r34 +64:r35 +64:r36 +64:r37 +64:r38 +64:r39 +64:r40 +64:r41 +64:r42 +64:r43 +64:r44 +64:r45 +64:r46 +64:r47 +64:r48 +64:r49 +64:r50 +64:r51 +64:r52 +64:tp +64:sp +64:lr +64:sn +64:io0 +64:io1 +64:us0 +64:us1 +64:us2 +64:us3 +64:zero +64:pc diff --git a/gdb/tilegx-linux-tdep.c b/gdb/tilegx-linux-tdep.c new file mode 100644 index 00000000000..c7c6d9c54e9 --- /dev/null +++ b/gdb/tilegx-linux-tdep.c @@ -0,0 +1,146 @@ +/* Target-dependent code for GNU/Linux on Tilera TILE-Gx processors. + + Copyright 2012 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include "defs.h" +#include "osabi.h" +#include "linux-tdep.h" +#include "glibc-tdep.h" +#include "solib-svr4.h" +#include "symtab.h" +#include "regcache.h" +#include "regset.h" +#include "tramp-frame.h" +#include "trad-frame.h" +#include "tilegx-tdep.h" + +/* Signal trampoline support. */ + +static void +tilegx_linux_sigframe_init (const struct tramp_frame *self, + struct frame_info *this_frame, + struct trad_frame_cache *this_cache, + CORE_ADDR func) +{ + CORE_ADDR pc = get_frame_register_unsigned (this_frame, 64); + CORE_ADDR sp = get_frame_register_unsigned (this_frame, 54); + CORE_ADDR base = sp + 16; + int i; + + for (i = 0; i < 56; i++) + trad_frame_set_reg_addr (this_cache, i, base + i * 8); + + trad_frame_set_reg_value (this_cache, 64, pc); + + /* Save a frame ID. */ + trad_frame_set_id (this_cache, frame_id_build (base, func)); +} + +static const struct tramp_frame tilegx_linux_rt_sigframe = +{ + SIGTRAMP_FRAME, + 8, + { + { 0x00045fe551483000, -1 }, /* { moveli r10, 139 } */ + { 0x286b180051485000, -1 }, /* { swint1 } */ + { TRAMP_SENTINEL_INSN, -1 } + }, + tilegx_linux_sigframe_init +}; + +/* Supply raw registers from REGCACHE to REGS. */ + +static void +tilegx_linux_supply_regset (const struct regset *regset, + struct regcache *regcache, + int regnum, const void *regs, size_t len) +{ + struct gdbarch *arch = get_regcache_arch (regcache); + const char *ptr = regs; + int i; + + /* This logic must match that of struct pt_regs in "ptrace.h". */ + for (i = 0; i < TILEGX_NUM_EASY_REGS + 1; i++, ptr += tilegx_reg_size) + { + int gri = (i < TILEGX_NUM_EASY_REGS) ? i : TILEGX_PC_REGNUM; + + if (regnum == gri || regnum == -1) + regcache_raw_supply (regcache, gri, ptr); + } +} + +/* TILE-Gx Linux kernel register set. */ +static struct regset tilegx_linux_regset = +{ + NULL, + tilegx_linux_supply_regset +}; + +static const struct regset * +tilegx_regset_from_core_section (struct gdbarch *gdbarch, + const char *sect_name, + size_t sect_size) +{ + if (strcmp (sect_name, ".reg") == 0) + return &tilegx_linux_regset; + + return NULL; +} + +/* OS specific initialization of gdbarch. */ + +static void +tilegx_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) +{ + int arch_size = gdbarch_addr_bit (gdbarch); + + linux_init_abi (info, gdbarch); + + tramp_frame_prepend_unwinder (gdbarch, &tilegx_linux_rt_sigframe); + + set_gdbarch_regset_from_core_section (gdbarch, + tilegx_regset_from_core_section); + + /* GNU/Linux uses SVR4-style shared libraries. */ + if (arch_size == 32) + set_solib_svr4_fetch_link_map_offsets (gdbarch, + svr4_ilp32_fetch_link_map_offsets); + else + set_solib_svr4_fetch_link_map_offsets (gdbarch, + svr4_lp64_fetch_link_map_offsets); + + /* Enable TLS support. */ + set_gdbarch_fetch_tls_load_module_address (gdbarch, + svr4_fetch_objfile_link_map); + + /* Shared library handling. */ + set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); + set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); + + set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type); +} + +/* Provide a prototype to silence -Wmissing-prototypes. */ +extern initialize_file_ftype _initialize_tilegx_linux_tdep; + +void +_initialize_tilegx_linux_tdep (void) +{ + gdbarch_register_osabi (bfd_arch_tilegx, bfd_mach_tilegx, GDB_OSABI_LINUX, + tilegx_linux_init_abi); +} diff --git a/gdb/tilegx-tdep.c b/gdb/tilegx-tdep.c new file mode 100644 index 00000000000..9ec3aaa53fd --- /dev/null +++ b/gdb/tilegx-tdep.c @@ -0,0 +1,1017 @@ +/* Target-dependent code for the Tilera TILE-Gx processor. + + Copyright (C) 2012 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include "defs.h" +#include "frame.h" +#include "frame-base.h" +#include "frame-unwind.h" +#include "dwarf2-frame.h" +#include "trad-frame.h" +#include "symtab.h" +#include "gdbtypes.h" +#include "gdbcmd.h" +#include "gdbcore.h" +#include "value.h" +#include "dis-asm.h" +#include "inferior.h" +#include "gdb_string.h" +#include "gdb_assert.h" +#include "arch-utils.h" +#include "floatformat.h" +#include "regcache.h" +#include "regset.h" +#include "doublest.h" +#include "osabi.h" +#include "linux-tdep.h" +#include "objfiles.h" +#include "solib-svr4.h" +#include "symtab.h" +#include "tilegx-tdep.h" +#include "opcode/tilegx.h" + +struct tilegx_frame_cache +{ + /* Base address. */ + CORE_ADDR base; + /* Function start. */ + CORE_ADDR start_pc; + + /* Table of saved registers. */ + struct trad_frame_saved_reg *saved_regs; +}; + +/* Register state values used by analyze_prologue. */ +enum reverse_state + { + REVERSE_STATE_REGISTER, + REVERSE_STATE_VALUE, + REVERSE_STATE_UNKNOWN + }; + +/* Register state used by analyze_prologue(). */ +struct tilegx_reverse_regs +{ + LONGEST value; + enum reverse_state state; +}; + +static const struct tilegx_reverse_regs +template_reverse_regs[TILEGX_NUM_PHYS_REGS] = + { + { TILEGX_R0_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R1_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R2_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R3_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R4_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R5_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R6_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R7_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R8_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R9_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R10_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R11_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R12_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R13_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R14_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R15_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R16_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R17_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R18_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R19_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R20_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R21_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R22_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R23_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R24_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R25_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R26_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R27_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R28_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R29_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R30_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R31_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R32_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R33_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R34_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R35_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R36_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R37_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R38_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R39_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R40_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R41_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R42_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R43_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R44_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R45_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R46_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R47_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R48_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R49_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R50_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R51_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_R52_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_TP_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_SP_REGNUM, REVERSE_STATE_REGISTER }, + { TILEGX_LR_REGNUM, REVERSE_STATE_REGISTER }, + { 0, REVERSE_STATE_UNKNOWN }, + { 0, REVERSE_STATE_UNKNOWN }, + { 0, REVERSE_STATE_UNKNOWN }, + { 0, REVERSE_STATE_UNKNOWN }, + { 0, REVERSE_STATE_UNKNOWN }, + { 0, REVERSE_STATE_UNKNOWN }, + { 0, REVERSE_STATE_UNKNOWN }, + { TILEGX_ZERO_REGNUM, REVERSE_STATE_VALUE } + }; + +/* Implement the "register_name" gdbarch method. */ + +static const char * +tilegx_register_name (struct gdbarch *gdbarch, int regnum) +{ + static const char *const register_names[TILEGX_NUM_REGS] = + { + "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", + "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", + "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39", + "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47", + "r48", "r49", "r50", "r51", "r52", "tp", "sp", "lr", + "sn", "idn0", "idn1", "udn0", "udn1", "udn2", "udn3", "zero", + "pc" + }; + + if (regnum < 0 || regnum >= TILEGX_NUM_REGS) + internal_error (__FILE__, __LINE__, + "tilegx_register_name: invalid register number %d", + regnum); + + return register_names[regnum]; +} + +/* This is the implementation of gdbarch method register_type. */ + +static struct type * +tilegx_register_type (struct gdbarch *gdbarch, int regnum) +{ + if (regnum == TILEGX_PC_REGNUM) + return builtin_type (gdbarch)->builtin_func_ptr; + else + return builtin_type (gdbarch)->builtin_uint64; +} + +/* This is the implementation of gdbarch method dwarf2_reg_to_regnum. */ + +static int +tilegx_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int num) +{ + return num; +} + +/* Makes the decision of whether a given type is a scalar type. + Scalar types are returned in the registers r2-r11 as they fit. */ + +static int +tilegx_type_is_scalar (struct type *t) +{ + return (TYPE_CODE(t) != TYPE_CODE_STRUCT + && TYPE_CODE(t) != TYPE_CODE_UNION + && TYPE_CODE(t) != TYPE_CODE_ARRAY); +} + +/* Returns non-zero if the given struct type will be returned using + a special convention, rather than the normal function return method. + Used in the context of the "return" command, and target function + calls from the debugger. */ + +static int +tilegx_use_struct_convention (struct type *type) +{ + /* Only scalars which fit in R0 - R9 can be returned in registers. + Otherwise, they are returned via a pointer passed in R0. */ + return (!tilegx_type_is_scalar (type) + && (TYPE_LENGTH (type) > (1 + TILEGX_R9_REGNUM - TILEGX_R0_REGNUM) + * tilegx_reg_size)); +} + +/* Find a function's return value in the appropriate registers (in + REGCACHE), and copy it into VALBUF. */ + +static void +tilegx_extract_return_value (struct type *type, struct regcache *regcache, + gdb_byte *valbuf) +{ + int len = TYPE_LENGTH (type); + int i, regnum = TILEGX_R0_REGNUM; + + for (i = 0; i < len; i += tilegx_reg_size) + regcache_raw_read (regcache, regnum++, valbuf + i); +} + +/* Copy the function return value from VALBUF into the proper + location for a function return. + Called only in the context of the "return" command. */ + +static void +tilegx_store_return_value (struct type *type, struct regcache *regcache, + const void *valbuf) +{ + if (TYPE_LENGTH (type) < tilegx_reg_size) + { + /* Add leading zeros to the (little-endian) value. */ + gdb_byte buf[tilegx_reg_size] = { 0 }; + + memcpy (buf, valbuf, TYPE_LENGTH (type)); + regcache_raw_write (regcache, TILEGX_R0_REGNUM, buf); + } + else + { + int len = TYPE_LENGTH (type); + int i, regnum = TILEGX_R0_REGNUM; + + for (i = 0; i < len; i += tilegx_reg_size) + regcache_raw_write (regcache, regnum++, (gdb_byte *) valbuf + i); + } +} + +/* This is the implementation of gdbarch method return_value. */ + +static enum return_value_convention +tilegx_return_value (struct gdbarch *gdbarch, struct value *function, + struct type *type, struct regcache *regcache, + gdb_byte *readbuf, const gdb_byte *writebuf) +{ + if (tilegx_use_struct_convention (type)) + return RETURN_VALUE_STRUCT_CONVENTION; + if (writebuf) + tilegx_store_return_value (type, regcache, writebuf); + else if (readbuf) + tilegx_extract_return_value (type, regcache, readbuf); + return RETURN_VALUE_REGISTER_CONVENTION; +} + +/* This is the implementation of gdbarch method frame_align. */ + +static CORE_ADDR +tilegx_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) +{ + return addr & -8; +} + + +/* Implement the "push_dummy_call" gdbarch method. */ + +static CORE_ADDR +tilegx_push_dummy_call (struct gdbarch *gdbarch, + struct value *function, + struct regcache *regcache, + CORE_ADDR bp_addr, int nargs, + struct value **args, + CORE_ADDR sp, int struct_return, + CORE_ADDR struct_addr) +{ + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + CORE_ADDR stack_dest = sp; + int argreg = TILEGX_R0_REGNUM; + int i, j; + int typelen, slacklen, alignlen; + static const gdb_byte two_zero_words[8] = { 0 }; + + /* If struct_return is 1, then the struct return address will + consume one argument-passing register. */ + if (struct_return) + regcache_cooked_write_unsigned (regcache, argreg++, struct_addr); + + /* Arguments are passed in R0 - R9, and as soon as an argument + will not fit completely in the remaining registers, then it, + and all remaining arguments, are put on the stack. */ + for (i = 0; i < nargs && argreg <= TILEGX_R9_REGNUM; i++) + { + const gdb_byte *val; + typelen = TYPE_LENGTH (value_enclosing_type (args[i])); + + if (typelen > (TILEGX_R9_REGNUM - argreg + 1) * tilegx_reg_size) + break; + + /* Put argument into registers wordwise. */ + val = value_contents (args[i]); + for (j = 0; j < typelen; j += tilegx_reg_size) + { + /* ISSUE: Why special handling for "typelen = 4x + 1"? + I don't ever see "typelen" values except 4 and 8. */ + int n = (typelen - j == 1) ? 1 : tilegx_reg_size; + ULONGEST w = extract_unsigned_integer (val + j, n, byte_order); + + regcache_cooked_write_unsigned (regcache, argreg++, w); + } + } + + /* Align SP. */ + stack_dest = tilegx_frame_align (gdbarch, stack_dest); + + /* Loop backwards through arguments to determine stack alignment. */ + alignlen = 0; + + for (j = nargs - 1; j >= i; j--) + { + typelen = TYPE_LENGTH (value_enclosing_type (args[j])); + alignlen += (typelen + 3) & (~3); + } + + if (alignlen & 0x4) + stack_dest -= 4; + + /* Loop backwards through remaining arguments and push them on + the stack, word aligned. */ + for (j = nargs - 1; j >= i; j--) + { + gdb_byte *val; + + typelen = TYPE_LENGTH (value_enclosing_type (args[j])); + slacklen = ((typelen + 3) & (~3)) - typelen; + val = alloca (typelen + slacklen); + memcpy (val, value_contents (args[j]), typelen); + memset (val + typelen, 0, slacklen); + + /* Now write data to the stack. The stack grows downwards. */ + stack_dest -= typelen + slacklen; + write_memory (stack_dest, val, typelen + slacklen); + } + + /* Add 2 words for linkage space to the stack. */ + stack_dest = stack_dest - 8; + write_memory (stack_dest, two_zero_words, 8); + + /* Update stack pointer. */ + regcache_cooked_write_unsigned (regcache, TILEGX_SP_REGNUM, stack_dest); + + /* Set the return address register to point to the entry point of + the program, where a breakpoint lies in wait. */ + regcache_cooked_write_unsigned (regcache, TILEGX_LR_REGNUM, bp_addr); + + return stack_dest; +} + + +/* Decode the instructions within the given address range. + Decide when we must have reached the end of the function prologue. + If a frame_info pointer is provided, fill in its saved_regs etc. + Returns the address of the first instruction after the prologue. + NOTE: This is often called with start_addr being the start of some + function, and end_addr being the current PC. */ + +static CORE_ADDR +tilegx_analyze_prologue (struct gdbarch* gdbarch, + CORE_ADDR start_addr, CORE_ADDR end_addr, + struct tilegx_frame_cache *cache, + struct frame_info *next_frame) +{ + enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + CORE_ADDR next_addr; + CORE_ADDR prolog_end = end_addr; + ULONGEST inst, inst2; + LONGEST offset; + int regnum; + gdb_byte instbuf[32 * TILEGX_BUNDLE_SIZE_IN_BYTES]; + CORE_ADDR instbuf_start; + unsigned int instbuf_size; + int status; + bfd_uint64_t bundle; + struct tilegx_decoded_instruction + decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]; + int num_insns; + struct tilegx_reverse_regs reverse_frame[TILEGX_NUM_PHYS_REGS]; + struct tilegx_reverse_regs + new_reverse_frame[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]; + int dest_regs[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]; + int reverse_frame_valid, prolog_done, branch_seen; + LONGEST prev_sp_value; + int i, j; + + if (start_addr >= end_addr + || (start_addr % TILEGX_BUNDLE_ALIGNMENT_IN_BYTES) != 0) + return end_addr; + + /* Initialize the reverse frame. This maps the CURRENT frame's + registers to the outer frame's registers (the frame on the + stack goes the other way). */ + memcpy (&reverse_frame, &template_reverse_regs, sizeof (reverse_frame)); + + prolog_done = 0; + branch_seen = 0; + prev_sp_value = 0; + + /* To cut down on round-trip overhead, we fetch multiple bundles + at once. These variables describe the range of memory we have + prefetched. */ + instbuf_start = 0; + instbuf_size = 0; + + for (next_addr = start_addr; + next_addr < end_addr; + next_addr += TILEGX_BUNDLE_SIZE_IN_BYTES) + { + /* Retrieve the next instruction. */ + if (next_addr - instbuf_start >= instbuf_size) + { + /* Figure out how many bytes to fetch. Don't span a page + boundary since that might cause an unnecessary memory + error. */ + unsigned int size_on_same_page = 4096 - (next_addr & 4095); + + instbuf_size = sizeof instbuf; + + if (instbuf_size > size_on_same_page) + instbuf_size = size_on_same_page; + instbuf_start = next_addr; + + status = safe_frame_unwind_memory (next_frame, instbuf_start, + instbuf, instbuf_size); + if (status == 0) + memory_error (status, next_addr); + } + + reverse_frame_valid = 0; + + bundle = extract_unsigned_integer (&instbuf[next_addr - instbuf_start], + 8, byte_order); + + num_insns = parse_insn_tilegx (bundle, next_addr, decoded); + + for (i = 0; i < num_insns; i++) + { + struct tilegx_decoded_instruction *this_insn = &decoded[i]; + int64_t *operands = (int64_t *) this_insn->operand_values; + const struct tilegx_opcode *opcode = this_insn->opcode; + + switch (opcode->mnemonic) + { + case TILEGX_OPC_ST: + if (cache + && reverse_frame[operands[0]].state == REVERSE_STATE_VALUE + && reverse_frame[operands[1]].state + == REVERSE_STATE_REGISTER) + { + LONGEST saved_address = reverse_frame[operands[0]].value; + unsigned saved_register + = (unsigned) reverse_frame[operands[1]].value; + + /* realreg >= 0 and addr != -1 indicates that the + value of saved_register is in memory location + saved_address. The value of realreg is not + meaningful in this case but it must be >= 0. + See trad-frame.h. */ + cache->saved_regs[saved_register].realreg = saved_register; + cache->saved_regs[saved_register].addr = saved_address; + } + break; + case TILEGX_OPC_ADDI: + case TILEGX_OPC_ADDLI: + if (cache + && operands[0] == TILEGX_SP_REGNUM + && operands[1] == TILEGX_SP_REGNUM + && reverse_frame[operands[1]].state == REVERSE_STATE_REGISTER) + { + /* Special case. We're fixing up the stack frame. */ + uint64_t hopefully_sp + = (unsigned) reverse_frame[operands[1]].value; + short op2_as_short = (short) operands[2]; + signed char op2_as_char = (signed char) operands[2]; + + /* Fix up the sign-extension. */ + if (opcode->mnemonic == TILEGX_OPC_ADDI) + op2_as_short = op2_as_char; + prev_sp_value = (cache->saved_regs[hopefully_sp].addr + - op2_as_short); + + new_reverse_frame[i].state = REVERSE_STATE_VALUE; + new_reverse_frame[i].value + = cache->saved_regs[hopefully_sp].addr; + trad_frame_set_value (cache->saved_regs, + hopefully_sp, prev_sp_value); + } + else + { + short op2_as_short = (short) operands[2]; + signed char op2_as_char = (signed char) operands[2]; + + /* Fix up the sign-extension. */ + if (opcode->mnemonic == TILEGX_OPC_ADDI) + op2_as_short = op2_as_char; + + new_reverse_frame[i] = reverse_frame[operands[1]]; + if (new_reverse_frame[i].state == REVERSE_STATE_VALUE) + new_reverse_frame[i].value += op2_as_short; + else + new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN; + } + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + case TILEGX_OPC_ADD: + if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE + && reverse_frame[operands[2]].state == REVERSE_STATE_VALUE) + { + /* We have values -- we can do this. */ + new_reverse_frame[i] = reverse_frame[operands[2]]; + new_reverse_frame[i].value + += reverse_frame[operands[i]].value; + } + else + { + /* We don't know anything about the values. Punt. */ + new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN; + } + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + case TILEGX_OPC_MOVE: + new_reverse_frame[i] = reverse_frame[operands[1]]; + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + case TILEGX_OPC_MOVEI: + case TILEGX_OPC_MOVELI: + new_reverse_frame[i].state = REVERSE_STATE_VALUE; + new_reverse_frame[i].value = operands[1]; + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + case TILEGX_OPC_ORI: + if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE) + { + /* We have a value in A -- we can do this. */ + new_reverse_frame[i] = reverse_frame[operands[1]]; + new_reverse_frame[i].value + = reverse_frame[operands[1]].value | operands[2]; + } + else if (operands[2] == 0) + { + /* This is a move. */ + new_reverse_frame[i] = reverse_frame[operands[1]]; + } + else + { + /* We don't know anything about the values. Punt. */ + new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN; + } + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + case TILEGX_OPC_OR: + if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE + && reverse_frame[operands[1]].value == 0) + { + /* This is a move. */ + new_reverse_frame[i] = reverse_frame[operands[2]]; + } + else if (reverse_frame[operands[2]].state == REVERSE_STATE_VALUE + && reverse_frame[operands[2]].value == 0) + { + /* This is a move. */ + new_reverse_frame[i] = reverse_frame[operands[1]]; + } + else + { + /* We don't know anything about the values. Punt. */ + new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN; + } + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + case TILEGX_OPC_SUB: + if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE + && reverse_frame[operands[2]].state == REVERSE_STATE_VALUE) + { + /* We have values -- we can do this. */ + new_reverse_frame[i] = reverse_frame[operands[1]]; + new_reverse_frame[i].value + -= reverse_frame[operands[2]].value; + } + else + { + /* We don't know anything about the values. Punt. */ + new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN; + } + reverse_frame_valid |= 1 << i; + dest_regs[i] = operands[0]; + break; + + case TILEGX_OPC_FNOP: + case TILEGX_OPC_INFO: + case TILEGX_OPC_INFOL: + /* Nothing to see here, move on. + Note that real NOP is treated as a 'real' instruction + because someone must have intended that it be there. + It therefore terminates the prolog. */ + break; + + case TILEGX_OPC_J: + case TILEGX_OPC_JAL: + + case TILEGX_OPC_BEQZ: + case TILEGX_OPC_BEQZT: + case TILEGX_OPC_BGEZ: + case TILEGX_OPC_BGEZT: + case TILEGX_OPC_BGTZ: + case TILEGX_OPC_BGTZT: + case TILEGX_OPC_BLBC: + case TILEGX_OPC_BLBCT: + case TILEGX_OPC_BLBS: + case TILEGX_OPC_BLBST: + case TILEGX_OPC_BLEZ: + case TILEGX_OPC_BLEZT: + case TILEGX_OPC_BLTZ: + case TILEGX_OPC_BLTZT: + case TILEGX_OPC_BNEZ: + case TILEGX_OPC_BNEZT: + + case TILEGX_OPC_IRET: + case TILEGX_OPC_JALR: + case TILEGX_OPC_JALRP: + case TILEGX_OPC_JR: + case TILEGX_OPC_JRP: + case TILEGX_OPC_SWINT0: + case TILEGX_OPC_SWINT1: + case TILEGX_OPC_SWINT2: + case TILEGX_OPC_SWINT3: + /* We're really done -- this is a branch. */ + branch_seen = 1; + prolog_done = 1; + break; + default: + /* We don't know or care what this instruction is. + All we know is that it isn't part of a prolog, and if + there's a destination register, we're trashing it. */ + prolog_done = 1; + for (j = 0; j < opcode->num_operands; j++) + { + if (this_insn->operands[j]->is_dest_reg) + { + dest_regs[i] = operands[j]; + new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN; + reverse_frame_valid |= 1 << i; + break; + } + } + break; + } + } + + /* Now update the reverse frames. */ + for (i = 0; i < num_insns; i++) + { + /* ISSUE: Does this properly handle "network" registers? */ + if ((reverse_frame_valid & (1 << i)) + && dest_regs[i] != TILEGX_ZERO_REGNUM) + reverse_frame[dest_regs[i]] = new_reverse_frame[i]; + } + + if (prev_sp_value != 0) + { + /* GCC uses R52 as a frame pointer. Have we seen "move r52, sp"? */ + if (reverse_frame[TILEGX_R52_REGNUM].state == REVERSE_STATE_REGISTER + && reverse_frame[TILEGX_R52_REGNUM].value == TILEGX_SP_REGNUM) + { + reverse_frame[TILEGX_R52_REGNUM].state = REVERSE_STATE_VALUE; + reverse_frame[TILEGX_R52_REGNUM].value = prev_sp_value; + } + + prev_sp_value = 0; + } + + if (prolog_done && prolog_end == end_addr) + { + /* We found non-prolog code. As such, _this_ instruction + is the one after the prolog. We keep processing, because + there may be more prolog code in there, but this is what + we'll return. */ + /* ISSUE: There may not have actually been a prologue, and + we may have simply skipped some random instructions. */ + prolog_end = next_addr; + } + if (branch_seen) + { + /* We saw a branch. The prolog absolutely must be over. */ + break; + } + } + + if (prolog_end == end_addr && cache) + { + /* We may have terminated the prolog early, and we're certainly + at THIS point right now. It's possible that the values of + registers we need are currently actually in other registers + (and haven't been written to memory yet). Go find them. */ + for (i = 0; i < TILEGX_NUM_PHYS_REGS; i++) + { + if (reverse_frame[i].state == REVERSE_STATE_REGISTER + && reverse_frame[i].value != i) + { + unsigned saved_register = (unsigned) reverse_frame[i].value; + + cache->saved_regs[saved_register].realreg = i; + cache->saved_regs[saved_register].addr = (LONGEST) -1; + } + } + } + + return prolog_end; +} + +/* This is the implementation of gdbarch method skip_prologue. */ + +static CORE_ADDR +tilegx_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc) +{ + struct symtab_and_line sal; + CORE_ADDR func_start, func_end; + + /* This is the preferred method, find the end of the prologue by + using the debugging information. */ + if (find_pc_partial_function (pc, NULL, &func_start, &func_end)) + { + sal = find_pc_line (func_start, 0); + + if (sal.end < func_end && pc <= sal.end) + return sal.end; + } + + /* Otherwise, try to skip prologue the hard way. */ + return tilegx_analyze_prologue (gdbarch, + pc, pc + 8 * TILEGX_BUNDLE_SIZE_IN_BYTES, + NULL, NULL); +} + +/* This is the implementation of gdbarch method in_function_epilogue_p. */ + +static int +tilegx_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc) +{ + CORE_ADDR func_addr = 0, func_end = 0; + + if (find_pc_partial_function (pc, NULL, &func_addr, &func_end)) + { + ULONGEST inst, inst2; + CORE_ADDR addr = func_end - TILEGX_BUNDLE_SIZE_IN_BYTES; + + /* FIXME: Find the actual epilogue. */ + /* HACK: Just assume the final bundle is the "ret" instruction". */ + if (pc > addr) + return 1; + } + return 0; +} + +/* This is the implementation of gdbarch method breakpoint_from_pc. */ + +static const unsigned char * +tilegx_breakpoint_from_pc (struct gdbarch *gdbarch, + CORE_ADDR *pcptr, int *lenptr) +{ + /* 64-bit pattern for a { bpt ; nop } bundle. */ + static const unsigned char breakpoint[] = + { 0x00, 0x50, 0x48, 0x51, 0xae, 0x44, 0x6a, 0x28 }; + + *lenptr = sizeof (breakpoint); + return breakpoint; +} + +/* Normal frames. */ + +static struct tilegx_frame_cache * +tilegx_frame_cache (struct frame_info *this_frame, void **this_cache) +{ + struct gdbarch *gdbarch = get_frame_arch (this_frame); + struct tilegx_frame_cache *cache; + CORE_ADDR current_pc; + int i; + + if (*this_cache) + return *this_cache; + + cache = FRAME_OBSTACK_ZALLOC (struct tilegx_frame_cache); + *this_cache = cache; + cache->saved_regs = trad_frame_alloc_saved_regs (this_frame); + cache->base = 0; + cache->start_pc = get_frame_func (this_frame); + current_pc = get_frame_pc (this_frame); + + cache->base = get_frame_register_unsigned (this_frame, TILEGX_SP_REGNUM); + trad_frame_set_value (cache->saved_regs, TILEGX_SP_REGNUM, cache->base); + + cache->saved_regs[TILEGX_PC_REGNUM] = cache->saved_regs[TILEGX_LR_REGNUM]; + if (cache->start_pc) + tilegx_analyze_prologue (gdbarch, cache->start_pc, current_pc, + cache, this_frame); + + return cache; +} + +/* Retrieve the value of REGNUM in FRAME. */ + +static struct value* +tilegx_frame_prev_register (struct frame_info *this_frame, + void **this_cache, + int regnum) +{ + struct tilegx_frame_cache *info = + tilegx_frame_cache (this_frame, this_cache); + + return trad_frame_get_prev_register (this_frame, info->saved_regs, + regnum); +} + +/* Build frame id. */ + +static void +tilegx_frame_this_id (struct frame_info *this_frame, void **this_cache, + struct frame_id *this_id) +{ + struct tilegx_frame_cache *info = + tilegx_frame_cache (this_frame, this_cache); + + /* This marks the outermost frame. */ + if (info->base == 0) + return; + + (*this_id) = frame_id_build (info->base, info->start_pc); +} + +static CORE_ADDR +tilegx_frame_base_address (struct frame_info *this_frame, void **this_cache) +{ + struct tilegx_frame_cache *cache = + tilegx_frame_cache (this_frame, this_cache); + + return cache->base; +} + +static const struct frame_unwind tilegx_frame_unwind = { + NORMAL_FRAME, + default_frame_unwind_stop_reason, + tilegx_frame_this_id, + tilegx_frame_prev_register, + NULL, /* const struct frame_data *unwind_data */ + default_frame_sniffer, /* frame_sniffer_ftype *sniffer */ + NULL /* frame_prev_pc_ftype *prev_pc */ +}; + +static const struct frame_base tilegx_frame_base = { + &tilegx_frame_unwind, + tilegx_frame_base_address, + tilegx_frame_base_address, + tilegx_frame_base_address +}; + +static CORE_ADDR +tilegx_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame) +{ + return frame_unwind_register_unsigned (next_frame, TILEGX_SP_REGNUM); +} + +static CORE_ADDR +tilegx_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame) +{ + return frame_unwind_register_unsigned (next_frame, TILEGX_PC_REGNUM); +} + +static struct frame_id +tilegx_unwind_dummy_id (struct gdbarch *gdbarch, + struct frame_info *this_frame) +{ + CORE_ADDR sp; + + sp = get_frame_register_unsigned (this_frame, TILEGX_SP_REGNUM); + return frame_id_build (sp, get_frame_pc (this_frame)); +} + + +/* We cannot read/write the "special" registers. */ + +static int +tilegx_cannot_reference_register (struct gdbarch *gdbarch, int regno) +{ + if (regno >= 0 && regno < TILEGX_NUM_EASY_REGS) + return 0; + else if (regno == TILEGX_PC_REGNUM) + return 0; + else + return 1; +} + +static struct gdbarch * +tilegx_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) +{ + struct gdbarch *gdbarch; + int arch_size = 64; + + /* Handle arch_size == 32 or 64. Default to 64. */ + if (info.abfd) + arch_size = bfd_get_arch_size (info.abfd); + + /* Try to find a pre-existing architecture. */ + for (arches = gdbarch_list_lookup_by_info (arches, &info); + arches != NULL; + arches = gdbarch_list_lookup_by_info (arches->next, &info)) + { + /* We only have two flavors -- just make sure arch_size matches. */ + if (gdbarch_ptr_bit (arches->gdbarch) == arch_size) + return (arches->gdbarch); + } + + gdbarch = gdbarch_alloc (&info, NULL); + + /* Basic register fields and methods, datatype sizes and stuff. */ + + /* There are 64 physical registers which can be referenced by + instructions (although only 56 of them can actually be + debugged) and 1 magic register (the PC). The other three + magic registers (ex1, syscall, orig_r0) which are known to + "ptrace" are ignored by "gdb". Note that we simply pretend + that there are 65 registers, and no "pseudo registers". */ + set_gdbarch_num_regs (gdbarch, TILEGX_NUM_REGS); + set_gdbarch_num_pseudo_regs (gdbarch, 0); + + set_gdbarch_sp_regnum (gdbarch, TILEGX_SP_REGNUM); + set_gdbarch_pc_regnum (gdbarch, TILEGX_PC_REGNUM); + + set_gdbarch_register_name (gdbarch, tilegx_register_name); + set_gdbarch_register_type (gdbarch, tilegx_register_type); + + set_gdbarch_char_signed (gdbarch, 0); + set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT); + set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT); + set_gdbarch_long_bit (gdbarch, arch_size); + set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT); + + set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT); + set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); + set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); + + set_gdbarch_ptr_bit (gdbarch, arch_size); + set_gdbarch_addr_bit (gdbarch, arch_size); + + set_gdbarch_cannot_fetch_register (gdbarch, + tilegx_cannot_reference_register); + set_gdbarch_cannot_store_register (gdbarch, + tilegx_cannot_reference_register); + + /* Stack grows down. */ + set_gdbarch_inner_than (gdbarch, core_addr_lessthan); + + /* Frame Info. */ + set_gdbarch_unwind_sp (gdbarch, tilegx_unwind_sp); + set_gdbarch_unwind_pc (gdbarch, tilegx_unwind_pc); + set_gdbarch_dummy_id (gdbarch, tilegx_unwind_dummy_id); + set_gdbarch_frame_align (gdbarch, tilegx_frame_align); + frame_base_set_default (gdbarch, &tilegx_frame_base); + + set_gdbarch_skip_prologue (gdbarch, tilegx_skip_prologue); + + set_gdbarch_in_function_epilogue_p (gdbarch, + tilegx_in_function_epilogue_p); + + /* Map debug registers into internal register numbers. */ + set_gdbarch_dwarf2_reg_to_regnum (gdbarch, tilegx_dwarf2_reg_to_regnum); + + /* These values and methods are used when gdb calls a target function. */ + set_gdbarch_push_dummy_call (gdbarch, tilegx_push_dummy_call); + set_gdbarch_breakpoint_from_pc (gdbarch, tilegx_breakpoint_from_pc); + set_gdbarch_return_value (gdbarch, tilegx_return_value); + + set_gdbarch_print_insn (gdbarch, print_insn_tilegx); + + gdbarch_init_osabi (info, gdbarch); + + dwarf2_append_unwinders (gdbarch); + frame_unwind_append_unwinder (gdbarch, &tilegx_frame_unwind); + + return gdbarch; +} + +/* Provide a prototype to silence -Wmissing-prototypes. */ +extern initialize_file_ftype _initialize_tilegx_tdep; + +void +_initialize_tilegx_tdep (void) +{ + register_gdbarch_init (bfd_arch_tilegx, tilegx_gdbarch_init); +} diff --git a/gdb/tilegx-tdep.h b/gdb/tilegx-tdep.h new file mode 100644 index 00000000000..3ac18a5a6c3 --- /dev/null +++ b/gdb/tilegx-tdep.h @@ -0,0 +1,109 @@ +/* Target-dependent code for the Tilera TILE-Gx processor. + + Copyright (C) 2012 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifndef TILEGX_TDEP_H +#define TILEGX_TDEP_H + +/* TILE-Gx has 56 general purpose registers (R0 - R52, TP, SP, LR), + plus 8 special general purpose registers (network and ZERO), + plus 1 magic register (PC). + + TP (aka R53) is the thread specific data pointer. + SP (aka R54) is the stack pointer. + LR (aka R55) is the link register. */ + +enum tilegx_regnum + { + TILEGX_R0_REGNUM, + TILEGX_R1_REGNUM, + TILEGX_R2_REGNUM, + TILEGX_R3_REGNUM, + TILEGX_R4_REGNUM, + TILEGX_R5_REGNUM, + TILEGX_R6_REGNUM, + TILEGX_R7_REGNUM, + TILEGX_R8_REGNUM, + TILEGX_R9_REGNUM, + TILEGX_R10_REGNUM, + TILEGX_R11_REGNUM, + TILEGX_R12_REGNUM, + TILEGX_R13_REGNUM, + TILEGX_R14_REGNUM, + TILEGX_R15_REGNUM, + TILEGX_R16_REGNUM, + TILEGX_R17_REGNUM, + TILEGX_R18_REGNUM, + TILEGX_R19_REGNUM, + TILEGX_R20_REGNUM, + TILEGX_R21_REGNUM, + TILEGX_R22_REGNUM, + TILEGX_R23_REGNUM, + TILEGX_R24_REGNUM, + TILEGX_R25_REGNUM, + TILEGX_R26_REGNUM, + TILEGX_R27_REGNUM, + TILEGX_R28_REGNUM, + TILEGX_R29_REGNUM, + TILEGX_R30_REGNUM, + TILEGX_R31_REGNUM, + TILEGX_R32_REGNUM, + TILEGX_R33_REGNUM, + TILEGX_R34_REGNUM, + TILEGX_R35_REGNUM, + TILEGX_R36_REGNUM, + TILEGX_R37_REGNUM, + TILEGX_R38_REGNUM, + TILEGX_R39_REGNUM, + TILEGX_R40_REGNUM, + TILEGX_R41_REGNUM, + TILEGX_R42_REGNUM, + TILEGX_R43_REGNUM, + TILEGX_R44_REGNUM, + TILEGX_R45_REGNUM, + TILEGX_R46_REGNUM, + TILEGX_R47_REGNUM, + TILEGX_R48_REGNUM, + TILEGX_R49_REGNUM, + TILEGX_R50_REGNUM, + TILEGX_R51_REGNUM, + TILEGX_R52_REGNUM, + TILEGX_TP_REGNUM, + TILEGX_SP_REGNUM, + TILEGX_LR_REGNUM, + + TILEGX_SN_REGNUM, + TILEGX_NUM_EASY_REGS = TILEGX_SN_REGNUM, /* 56 */ + + TILEGX_IO0_REGNUM, + TILEGX_IO1_REGNUM, + TILEGX_US0_REGNUM, + TILEGX_US1_REGNUM, + TILEGX_US2_REGNUM, + TILEGX_US3_REGNUM, + TILEGX_ZERO_REGNUM, + + TILEGX_PC_REGNUM, + TILEGX_NUM_PHYS_REGS = TILEGX_PC_REGNUM, /* 64 */ + + TILEGX_NUM_REGS /* 65 */ + }; + +enum { tilegx_reg_size = 8 }; + +#endif /* tilegx-tdep.h */