From: Dimitry Golubovsky <golubovsky@gmail.com>
Date: Sat, 5 May 2012 16:05:18 +0000 (+0000)
Subject: package: add read-edid
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=adebe9df0f42a929441d40e84f30e546f2852d68;p=buildroot.git

package: add read-edid

[Peter: fixup whitespace]
Signed-off-by: Dmitry <golubovsky@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---

diff --git a/package/Config.in b/package/Config.in
index 6caca9da4f..94d0fb47f0 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -211,6 +211,7 @@ source "package/openocd/Config.in"
 source "package/parted/Config.in"
 source "package/pciutils/Config.in"
 source "package/picocom/Config.in"
+source "package/read-edid/Config.in"
 source "package/rng-tools/Config.in"
 source "package/sane-backends/Config.in"
 source "package/sdparm/Config.in"
diff --git a/package/read-edid/Config.in b/package/read-edid/Config.in
new file mode 100644
index 0000000000..bdcb7a7d2e
--- /dev/null
+++ b/package/read-edid/Config.in
@@ -0,0 +1,14 @@
+config BR2_PACKAGE_READ_EDID
+	bool "read-edid"
+	depends on BR2_i386
+	help
+	  Read-edid is a pair of tools for reading the EDID from a
+	  monitor.  It should work with most monitors made since 1996
+	  (except for newer ones with 256-byte EDID's - WiP), assuming
+	  the video card supports the standard read commands (most
+	  do).  Read-edid is a set of two tools - get-edid, which gets
+	  the raw edid information from the monitor, and parse-edid,
+	  which turns the raw binary information into an
+	  XF86Config-compatible monitor section.
+
+	  http://polypux.org/projects/read-edid/
diff --git a/package/read-edid/read-edid.mk b/package/read-edid/read-edid.mk
new file mode 100644
index 0000000000..b568d5b8b9
--- /dev/null
+++ b/package/read-edid/read-edid.mk
@@ -0,0 +1,19 @@
+############################################
+#
+# read-edid
+#
+############################################
+
+READ_EDID_VERSION = 1.4.2
+READ_EDID_SITE = http://www.polypux.org/projects/read-edid/
+
+define READ_EDID_BUILD_CMDS
+	$(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
+endef
+
+define READ_EDID_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid
+	$(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid
+endef
+
+$(eval $(call AUTOTARGETS))