From: sadullah Date: Tue, 12 May 2020 04:58:19 +0000 (-0400) Subject: Update README.md and core.py for BlackParrot X-Git-Tag: 24jan2021_ls180~355^2 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=aed1d514ab6e11f4c023d3ba219c92cc60280c57;p=litex.git Update README.md and core.py for BlackParrot --- diff --git a/litex/soc/cores/cpu/blackparrot/GETTING_STARTED.md b/litex/soc/cores/cpu/blackparrot/GETTING_STARTED.md deleted file mode 100644 index 55ec62e2..00000000 --- a/litex/soc/cores/cpu/blackparrot/GETTING_STARTED.md +++ /dev/null @@ -1,24 +0,0 @@ -# Getting started (TODO:update) - -## Running BP in LiteX - -cd $LITEX/litex/tools # the folder where litex simulator resides - -./litex_sim.py --cpu-type blackparrot --cpu-variant standard --integrated-rom-size 40960 --output-dir build/BP --threads 4 --opt-level=O0 --trace --trace-start 0 - -#The above command will generate a dut.vcd file under build/BP/gateware folder. gtkwave works fine with the generated dut.vcd. - -## Additional Information - -The BlackParrot resides in $BP/pre-alpha-release/ - -core.py in $BP folder is the wrapper that integrates BP into LiteX. - -flist.verilator in $BP is all the files that litex_sim fetches for simulation. - -The top module is $BP_FPGA_DIR/ExampleBlackParrotSystem.v - -The transducer for wishbone communication is $BP_FPGA_DIR/bp2wb_convertor.v - -if args.sdram_init is not None: #instead of ram_init for sdram init boot - soc.add_constant("ROM_BOOT_ADDRESS", 0x80000000) diff --git a/litex/soc/cores/cpu/blackparrot/README.md b/litex/soc/cores/cpu/blackparrot/README.md index 4fe921f7..1fbe5836 100644 --- a/litex/soc/cores/cpu/blackparrot/README.md +++ b/litex/soc/cores/cpu/blackparrot/README.md @@ -1,60 +1,41 @@ # BlackParrot in LiteX -## Getting Started +## Prerequisites and Installing -TODO: modify getting started [Getting Started (Full)](GETTING_STARTED.md) +Please visit https://github.com/scanakci/linux-on-litex-blackparrot for the detailed setup instructions and linux boot-up process. -### Prerequisites +## Set necessary environment variables for BlackParrot -``` -BP sources (https://github.com/litex-hub/pythondata-cpu-blackparrot) -RISC-V toolchain built for IA architecture (prebuilt binaries provided by LiteX works fine) -Verilator (tested with Verilator 4.031) -``` - -### Installing +Running BP in LiteX requires setting some environment variables. Please add the following lines to your bashrc to set them up. ``` -https://github.com/litex-hub/pythondata-cpu-blackparrot is required to run BP in LiteX. -source ./setEnvironment.sh #should be sourced each time you open a terminal or just add this line to bashrc +pushd . +cd PATH/TO/LITEX/litex/soc/cores/cpu/blackparrot +source ./setEnvironment.sh +popd ``` ## Running BIOS +[![asciicast](https://asciinema.org/a/326077.svg)](https://asciinema.org/a/326077) + ### Simulation ``` cd $LITEX/litex/tools ./litex_sim.py --cpu-type blackparrot --cpu-variant standard --output-dir build/BP_Trial ``` -[![asciicast](https://asciinema.org/a/326077.svg)](https://asciinema.org/a/326077) ### FPGA -``` -Coming soon! -``` - -## Running Linux - -### Simulation +Generate the bitstream 'top.bit' under build/BP_trial/gateware folder ``` -Modify litex_sim.py by replacing soc.add_constant("ROM_BOOT_ADDRESS", 0x40000000) with soc.add_constant("ROM_BOOT_ADDRESS", 0x80000000) - -./litex_sim.py --cpu-type blackparrot --cpu-variant standard --integrated-rom-size 40960 --output-dir build/BP_newversion_linux_ram/ --threads 4 --ram-init build/tests/boot.bin.uart.simu.trial - -TODO: add prebuilt bbl files into python-data repository - +$LITEX/litex/boards/genesys2.py --cpu-type blackparrot --cpu-variant standard --output-dir $PWD/build/BP_Trial --integrated-rom-size 51200 --build ``` - -### FPGA - +In another terminal, launch LiteX terminal. ``` -Coming soon! +sudo $LITEX/litex/tools/litex_term.py /dev/ttyUSBX ``` +Load the FPGA bitstream top.bit to your FPGA (you can use vivado hardware manager) - - - - - +This step will execute LiteX BIOS. diff --git a/litex/soc/cores/cpu/blackparrot/core.py b/litex/soc/cores/cpu/blackparrot/core.py index 296938f4..79ee294d 100644 --- a/litex/soc/cores/cpu/blackparrot/core.py +++ b/litex/soc/cores/cpu/blackparrot/core.py @@ -29,7 +29,7 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. import os - +import sys from migen import * from litex import get_data_mod @@ -108,7 +108,15 @@ class BlackParrotRV64(CPU): ) # add verilog sources - self.add_sources(platform, variant) + try: + os.environ["BP"] + os.environ["LITEX"] + self.add_sources(platform, variant) + except KeyError: + RED = '\033[91m' + print(RED + "Please set environment variables first, refer to readme file under litex/soc/cores/cpu/blackparrot for details!") + sys.exit(1) + def set_reset_address(self, reset_address): assert not hasattr(self, "reset_address") @@ -137,14 +145,14 @@ class BlackParrotRV64(CPU): a = os.popen('echo '+ str(dir_)) dir_start = a.read() vdir = dir_start[:-1] + line[s2:-1] - platform.add_verilog_include_path(vdir) #this line might be changed + platform.add_verilog_include_path(vdir) elif (temp[0]=='$') : s2 = line.find('/') dir_ = line[0:s2] a = os.popen('echo '+ str(dir_)) dir_start = a.read() vdir = dir_start[:-1]+ line[s2:-1] - platform.add_source(vdir, "systemverilog") #this line might be changed + platform.add_source(vdir, "systemverilog") elif (temp[0] == '/'): assert("No support for absolute path for now")