From: Ben Widawsky Date: Sun, 8 Feb 2015 21:59:57 +0000 (-0800) Subject: i965/fs: Combine tex/fb_write operations (opt) X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b069f9eafd945a86be633d8fff4e715fc6d7ec2d;p=mesa.git i965/fs: Combine tex/fb_write operations (opt) Certain platforms support the ability to sample from a texture, and write it out to the file RT - thus saving a costly send instructions (note that this is a potnential win if one wanted to backport to a tag that didn't have the patch from Topi which removed excess MOVs from LOAD_PAYLOAD - 97caf5fa04dbd2), v2: Modify the algorithm. Instead of iterating in reverse through blocks and insts, since the last block/inst is the only thing which can benefit. Rebased on top of Ken's patching modifying is_last_send v3: Rebased over almost 2 months, and Incorporated feedback from Matt: Some comment typo fixes and rewordings. Whitespace Move the optimization pass outside of the optimize loop v4: Some cosmetic changes requested from Ken. These changes ensured that the optimization function always returned true when an optimization occurred, and false when one did not. This behavior did not exist with the original patch. As a result, having the separate helper function which Matt did not like no longer made sense, and so now I believe everyone should be happy. Benchmark (n=20) %diff *OglBatch5 -1.4 *OglBatch7 -1.79 OglFillTexMulti 5.57 OglFillTexSingle 1.16 OglShMapPcf 0.05 OglTexFilterAniso 3.01 OglTexFilterTri 1.94 No piglit regressions: (http://otc-gfxtest-01.jf.intel.com:8080/view/dev/job/bwidawsk/112/) [*] I believe my measurements are incorrect for Batch5-7. If I add this new optimization, but never emit the new instruction I see similar results. v5: Remove declaration of combine_tex_header since v4 dropped that function (Ben) Remove check for impossible case of an empty block (Matt) Set dest earlier to avoid extra special-casing in generate_tex (Matt) Signed-off-by: Ben Widawsky Reviewed-by: Matt Turner Reviewed-by: Kenneth Graunke --- diff --git a/src/mesa/drivers/dri/i965/brw_fs.cpp b/src/mesa/drivers/dri/i965/brw_fs.cpp index f04fb59f69f..7cc88eade45 100644 --- a/src/mesa/drivers/dri/i965/brw_fs.cpp +++ b/src/mesa/drivers/dri/i965/brw_fs.cpp @@ -2555,6 +2555,94 @@ fs_visitor::opt_algebraic() return progress; } +/** + * Optimize sample messages which are followed by the final RT write. + * + * CHV, and GEN9+ can mark a texturing SEND instruction with EOT to have its + * results sent directly to the framebuffer, bypassing the EU. Recognize the + * final texturing results copied to the framebuffer write payload and modify + * them to write to the framebuffer directly. + */ +bool +fs_visitor::opt_sampler_eot() +{ + brw_wm_prog_key *key = (brw_wm_prog_key*) this->key; + + if (brw->gen < 9 && !brw->is_cherryview) + return false; + + /* FINISHME: It should be possible to implement this optimization when there + * are multiple drawbuffers. + */ + if (key->nr_color_regions != 1) + return false; + + /* Look for a texturing instruction immediately before the final FB_WRITE. */ + fs_inst *fb_write = (fs_inst *) cfg->blocks[cfg->num_blocks - 1]->end(); + assert(fb_write->eot); + assert(fb_write->opcode == FS_OPCODE_FB_WRITE); + + fs_inst *tex_inst = (fs_inst *) fb_write->prev; + + /* There wasn't one; nothing to do. */ + if (unlikely(tex_inst->is_head_sentinel()) || !tex_inst->is_tex()) + return false; + + /* If there's no header present, we need to munge the LOAD_PAYLOAD as well. + * It's very likely to be the previous instruction. + */ + fs_inst *load_payload = (fs_inst *) tex_inst->prev; + if (load_payload->is_head_sentinel() || + load_payload->opcode != SHADER_OPCODE_LOAD_PAYLOAD) + return false; + + assert(!tex_inst->eot); /* We can't get here twice */ + assert((tex_inst->offset & (0xff << 24)) == 0); + + tex_inst->offset |= fb_write->target << 24; + tex_inst->eot = true; + fb_write->remove(cfg->blocks[cfg->num_blocks - 1]); + + /* If a header is present, marking the eot is sufficient. Otherwise, we need + * to create a new LOAD_PAYLOAD command with the same sources and a space + * saved for the header. Using a new destination register not only makes sure + * we have enough space, but it will make sure the dead code eliminator kills + * the instruction that this will replace. + */ + if (tex_inst->header_present) + return true; + + fs_reg send_header = vgrf(load_payload->sources + 1); + fs_reg *new_sources = + ralloc_array(mem_ctx, fs_reg, load_payload->sources + 1); + + new_sources[0] = fs_reg(); + for (int i = 0; i < load_payload->sources; i++) + new_sources[i+1] = load_payload->src[i]; + + /* The LOAD_PAYLOAD helper seems like the obvious choice here. However, it + * requires a lot of information about the sources to appropriately figure + * out the number of registers needed to be used. Given this stage in our + * optimization, we may not have the appropriate GRFs required by + * LOAD_PAYLOAD at this point (copy propagation). Therefore, we need to + * manually emit the instruction. + */ + fs_inst *new_load_payload = new(mem_ctx) fs_inst(SHADER_OPCODE_LOAD_PAYLOAD, + load_payload->exec_size, + send_header, + new_sources, + load_payload->sources + 1); + + new_load_payload->regs_written = load_payload->regs_written + 1; + tex_inst->mlen++; + tex_inst->header_present = true; + tex_inst->insert_before(cfg->blocks[cfg->num_blocks - 1], new_load_payload); + tex_inst->src[0] = send_header; + tex_inst->dst = reg_null_ud; + + return true; +} + bool fs_visitor::opt_register_renaming() { @@ -3761,6 +3849,8 @@ fs_visitor::optimize() pass_num = 0; + OPT(opt_sampler_eot); + if (OPT(lower_load_payload)) { split_virtual_grfs(); OPT(register_coalesce); diff --git a/src/mesa/drivers/dri/i965/brw_fs.h b/src/mesa/drivers/dri/i965/brw_fs.h index cfdbf555d62..32063f01b8c 100644 --- a/src/mesa/drivers/dri/i965/brw_fs.h +++ b/src/mesa/drivers/dri/i965/brw_fs.h @@ -231,6 +231,8 @@ public: bool compute_to_mrf(); bool dead_code_eliminate(); bool remove_duplicate_mrf_writes(); + + bool opt_sampler_eot(); bool virtual_grf_interferes(int a, int b); void schedule_instructions(instruction_scheduler_mode mode); void insert_gen4_send_dependency_workarounds(); diff --git a/src/mesa/drivers/dri/i965/brw_fs_generator.cpp b/src/mesa/drivers/dri/i965/brw_fs_generator.cpp index 7c000206d09..b06a947519c 100644 --- a/src/mesa/drivers/dri/i965/brw_fs_generator.cpp +++ b/src/mesa/drivers/dri/i965/brw_fs_generator.cpp @@ -517,6 +517,7 @@ fs_generator::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src int rlen = 4; uint32_t simd_mode; uint32_t return_format; + bool is_combined_send = inst->eot; switch (dst.type) { case BRW_REGISTER_TYPE_D: @@ -688,6 +689,11 @@ fs_generator::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src dst = vec16(dst); } + if (is_combined_send) { + assert(brw->gen >= 9 || brw->is_cherryview); + rlen = 0; + } + assert(brw->gen < 7 || !inst->header_present || src.file == BRW_GENERAL_REGISTER_FILE); @@ -793,6 +799,11 @@ fs_generator::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src * so has already done marking. */ } + + if (is_combined_send) { + brw_inst_set_eot(brw, brw_last_inst, true); + brw_inst_set_opcode(brw, brw_last_inst, BRW_OPCODE_SENDC); + } }