From: Bob Wilson Date: Tue, 12 Oct 2004 23:05:32 +0000 (+0000) Subject: bfd ChangeLog X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b08b50715338943656d9001415debe7f74a589c6;p=binutils-gdb.git bfd ChangeLog * elf32-xtensa.c (elf_xtensa_get_private_bfd_flags): Delete. (narrow_instruction, widen_instruction): Remove unnecessary calls to xtensa_format_encode. (ebb_propose_action): Inline call to ebb_add_proposed_action. (ebb_add_proposed_action): Delete. gas ChangeLog * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq. (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode, is_windowed_return_opcode): Delete. (xtensa_frob_label): Use get_subseg_target_freq. (md_assemble): Inline call to is_entry_opcode. (xtensa_handle_align): Inline call to get_frag_is_literal. (relaxation_requirements): Inline call to is_jx_opcode. (emit_single_op): Inline call to is_movi_opcode. (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn, get_frag_is_no_transform, is_entry_opcode, and set_frag_is_specific_opcode. Use get_subseg_total_freq. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags, xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed): Inline calls to get_frag_is_no_transform. (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode. (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and get_frag_is_no_transform. (convert_frag_immed_finish_loop): Inline calls to get_expression_value and set_frag_is_no_transform. (get_expression_value): Delete. (subseg_map struct): Rename cur_total_freq to total_freq. Rename cur_target_freq to target_freq. (get_subseg_info): Split out code to create a new map entry into ... (add_subseg_info): ... this new function. (get_last_insn_flags): Check if get_subseg_info succeeded. (set_last_insn_flags): Call add_subseg_info if needed. (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New. (xtensa_reorder_segments): Compute last_sec while counting sections. Remove call to get_last_sec. (get_last_sec): Delete. (cache_literal_section): Inline call to retrieve_literal_seg and its callees, seg_present and add_seg_list. (retrieve_literal_seg, seg_present, add_seg_list): Delete. (get_frag_is_insn, get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): Delete. * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15. --- diff --git a/bfd/ChangeLog b/bfd/ChangeLog index c0b4e3a51fe..0ba2f6ce8d0 100644 --- a/bfd/ChangeLog +++ b/bfd/ChangeLog @@ -1,3 +1,11 @@ +2004-10-12 Bob Wilson + + * elf32-xtensa.c (elf_xtensa_get_private_bfd_flags): Delete. + (narrow_instruction, widen_instruction): Remove unnecessary calls to + xtensa_format_encode. + (ebb_propose_action): Inline call to ebb_add_proposed_action. + (ebb_add_proposed_action): Delete. + 2004-10-12 Bob Wilson * elf32-xtensa.c: Use ISO C90 formatting. diff --git a/bfd/elf32-xtensa.c b/bfd/elf32-xtensa.c index 56f317f7fba..8d9649e3a60 100644 --- a/bfd/elf32-xtensa.c +++ b/bfd/elf32-xtensa.c @@ -37,8 +37,6 @@ #define XTENSA_NO_NOP_REMOVAL 0 -extern flagword elf_xtensa_get_private_bfd_flags (bfd *); - /* Local helper functions. */ static bfd_boolean add_extra_plt_sections (bfd *, int); @@ -2767,13 +2765,6 @@ elf_xtensa_set_private_flags (bfd *abfd, flagword flags) } -extern flagword -elf_xtensa_get_private_bfd_flags (bfd *abfd) -{ - return elf_elfheader (abfd)->e_flags; -} - - static bfd_boolean elf_xtensa_print_private_bfd_data (bfd *abfd, void *farg) { @@ -3641,7 +3632,6 @@ narrow_instruction (bfd_byte *contents, || xtensa_format_length (isa, o_fmt) != 2) return FALSE; - xtensa_format_encode (isa, o_fmt, o_slotbuf); xtensa_format_encode (isa, o_fmt, o_insnbuf); operand_count = xtensa_opcode_num_operands (isa, opcode); o_operand_count = xtensa_opcode_num_operands (isa, o_opcode); @@ -3789,7 +3779,6 @@ widen_instruction (bfd_byte *contents, || xtensa_format_length (isa, o_fmt) != 3) return FALSE; - xtensa_format_encode (isa, o_fmt, o_slotbuf); xtensa_format_encode (isa, o_fmt, o_insnbuf); operand_count = xtensa_opcode_num_operands (isa, opcode); o_operand_count = xtensa_opcode_num_operands (isa, o_opcode); @@ -5595,8 +5584,6 @@ insn_block_decodable_len (bfd_byte *contents, } -static void ebb_add_proposed_action (ebb_constraint *, proposed_action *); - static void ebb_propose_action (ebb_constraint *c, bfd_vma alignment_pow, @@ -5606,24 +5593,13 @@ ebb_propose_action (ebb_constraint *c, int removed_bytes, bfd_boolean do_action) { - proposed_action paction; - paction.align_type = align_type; - paction.alignment_pow = alignment_pow; - paction.action = action; - paction.offset = offset; - paction.removed_bytes = removed_bytes; - paction.do_action = do_action; - ebb_add_proposed_action (c, &paction); -} + proposed_action *act; - -static void -ebb_add_proposed_action (ebb_constraint *c, proposed_action *action) -{ - unsigned i; if (c->action_allocated <= c->action_count) { - unsigned new_allocated = (c->action_count + 2) * 2; + unsigned new_allocated, i; + + new_allocated = (c->action_count + 2) * 2; proposed_action *new_actions = (proposed_action *) bfd_zmalloc (sizeof (proposed_action) * new_allocated); @@ -5634,7 +5610,15 @@ ebb_add_proposed_action (ebb_constraint *c, proposed_action *action) c->actions = new_actions; c->action_allocated = new_allocated; } - c->actions[c->action_count] = *action; + + act = &c->actions[c->action_count]; + act->align_type = align_type; + act->alignment_pow = alignment_pow; + act->action = action; + act->offset = offset; + act->removed_bytes = removed_bytes; + act->do_action = do_action; + c->action_count++; } diff --git a/gas/ChangeLog b/gas/ChangeLog index 043fb052f33..3fc05975adb 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,42 @@ +2004-10-12 Bob Wilson + + * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq. + (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode, + is_windowed_return_opcode): Delete. + (xtensa_frob_label): Use get_subseg_target_freq. + (md_assemble): Inline call to is_entry_opcode. + (xtensa_handle_align): Inline call to get_frag_is_literal. + (relaxation_requirements): Inline call to is_jx_opcode. + (emit_single_op): Inline call to is_movi_opcode. + (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn, + get_frag_is_no_transform, is_entry_opcode, and + set_frag_is_specific_opcode. Use get_subseg_total_freq. + (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags, + xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed): + Inline calls to get_frag_is_no_transform. + (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode. + (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and + get_frag_is_no_transform. + (convert_frag_immed_finish_loop): Inline calls to get_expression_value + and set_frag_is_no_transform. + (get_expression_value): Delete. + (subseg_map struct): Rename cur_total_freq to total_freq. Rename + cur_target_freq to target_freq. + (get_subseg_info): Split out code to create a new map entry into ... + (add_subseg_info): ... this new function. + (get_last_insn_flags): Check if get_subseg_info succeeded. + (set_last_insn_flags): Call add_subseg_info if needed. + (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New. + (xtensa_reorder_segments): Compute last_sec while counting sections. + Remove call to get_last_sec. + (get_last_sec): Delete. + (cache_literal_section): Inline call to retrieve_literal_seg and its + callees, seg_present and add_seg_list. + (retrieve_literal_seg, seg_present, add_seg_list): Delete. + (get_frag_is_insn, get_frag_is_no_transform, + set_frag_is_specific_opcode, set_frag_is_no_transform): Delete. + * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15. + 2004-10-12 Bob Wilson * config/tc-xtensa.c: Use ISO C90 formatting. diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c index faac466b337..b75de922c04 100644 --- a/gas/config/tc-xtensa.c +++ b/gas/config/tc-xtensa.c @@ -308,29 +308,6 @@ typedef struct emit_state_struct } emit_state; -/* A map that keeps information on a per-subsegment basis. This is - maintained during initial assembly, but is invalid once the - subsegments are smashed together. I.E., it cannot be used during - the relaxation. */ - -typedef struct subseg_map_struct -{ - /* the key */ - segT seg; - subsegT subseg; - - /* the data */ - unsigned flags; - /* the fall-through frequency + the branch target frequency - typically used for the instruction after a call */ - float cur_total_freq; - /* the branch target frequency alone */ - float cur_target_freq; - - struct subseg_map_struct *next; -} subseg_map; - - /* Opcode placement information */ typedef unsigned long long bitfield; @@ -475,11 +452,13 @@ static addressT get_text_align_max_fill_size (int, bfd_boolean, bfd_boolean); static long relax_frag_add_nop (fragS *); -/* Flags for the Last Instruction in Each Subsegment. */ +/* Accessors for additional per-subsegment information. */ -static subseg_map *get_subseg_info (segT, subsegT); static unsigned get_last_insn_flags (segT, subsegT); static void set_last_insn_flags (segT, subsegT, unsigned, bfd_boolean); +static float get_subseg_total_freq (segT, subsegT); +static float get_subseg_target_freq (segT, subsegT); +static void set_subseg_freq (segT, subsegT, float, float); /* Segment list functions. */ @@ -492,14 +471,6 @@ static void xtensa_restore_emit_state (emit_state *); static void cache_literal_section (seg_list *, const char *, segT *, bfd_boolean); -/* Property flags on fragments and conversion to object file flags. */ - -static bfd_boolean get_frag_is_literal (const fragS *); -static bfd_boolean get_frag_is_insn (const fragS *); -static bfd_boolean get_frag_is_no_transform (fragS *); -static void set_frag_is_specific_opcode (fragS *, bfd_boolean); -static void set_frag_is_no_transform (fragS *, bfd_boolean); - /* Import from elf32-xtensa.c in BFD library. */ extern char *xtensa_get_property_section_name (asection *, const char *); @@ -1585,7 +1556,7 @@ xtensa_literal_prefix (char const *start, int len) strcpy (newname4 + suffix_pos, ".lit4"); } - /* Note that retrieve_literal_seg does not create a segment if + /* Note that cache_literal_section does not create a segment if it already exists. */ default_lit_sections.lit_seg = NULL; default_lit_sections.lit4_seg = NULL; @@ -1605,7 +1576,6 @@ static void xtensa_frequency_pseudo (int ignored ATTRIBUTE_UNUSED) { float fall_through_f, target_f; - subseg_map *seginfo; fall_through_f = (float) strtod (input_line_pointer, &input_line_pointer); if (fall_through_f < 0) @@ -1623,9 +1593,7 @@ xtensa_frequency_pseudo (int ignored ATTRIBUTE_UNUSED) return; } - seginfo = get_subseg_info (now_seg, now_subseg); - seginfo->cur_target_freq = target_f; - seginfo->cur_total_freq = target_f + fall_through_f; + set_subseg_freq (now_seg, now_subseg, target_f + fall_through_f, target_f); demand_empty_rest_of_line (); } @@ -2686,67 +2654,6 @@ is_direct_call_opcode (xtensa_opcode opcode) } -/* Return TRUE if the opcode is an entry opcode. This is used because - "entry" adds an implicit ".align 4" and also the entry instruction - has an extra check for an operand value. */ - -static bfd_boolean -is_entry_opcode (xtensa_opcode opcode) -{ - if (opcode == XTENSA_UNDEFINED) - return FALSE; - - return (opcode == xtensa_entry_opcode); -} - - -/* Return TRUE if the opcode is a movi or movi.n opcode. This is - so we can relax "movi aX, foo" in the front end. */ - -static bfd_boolean -is_movi_opcode (xtensa_opcode opcode) -{ - if (opcode == XTENSA_UNDEFINED) - return FALSE; - - return (opcode == xtensa_movi_opcode) - || (opcode == xtensa_movi_n_opcode); -} - - -static bfd_boolean -is_the_loop_opcode (xtensa_opcode opcode) -{ - if (opcode == XTENSA_UNDEFINED) - return FALSE; - - return (opcode == xtensa_loop_opcode); -} - - -static bfd_boolean -is_jx_opcode (xtensa_opcode opcode) -{ - if (opcode == XTENSA_UNDEFINED) - return FALSE; - - return (opcode == xtensa_jx_opcode); -} - - -/* Return TRUE if the opcode is a retw or retw.n. - Needed to add nops to avoid a hardware interlock issue. */ - -static bfd_boolean -is_windowed_return_opcode (xtensa_opcode opcode) -{ - if (opcode == XTENSA_UNDEFINED) - return FALSE; - - return (opcode == xtensa_retw_opcode || opcode == xtensa_retw_n_opcode); -} - - /* Convert from BFD relocation type code to slot and operand number. Returns non-zero on failure. */ @@ -5231,7 +5138,7 @@ xtensa_frob_label (symbolS *sym) && !is_unaligned_label (sym) && !generating_literals) { - float freq = get_subseg_info (now_seg, now_subseg)->cur_target_freq; + float freq = get_subseg_target_freq (now_seg, now_subseg); xtensa_set_frag_assembly_state (frag_now); /* The only time this type of frag grows is when there is a @@ -5459,7 +5366,7 @@ md_assemble (char *str) xg_add_branch_and_loop_targets (&orig_insn); /* Special-case for "entry" instruction. */ - if (is_entry_opcode (orig_insn.opcode)) + if (orig_insn.opcode == xtensa_entry_opcode) { /* Check that the third opcode (#2) is >= 16. */ if (orig_insn.ntok >= 3) @@ -5511,7 +5418,7 @@ void xtensa_handle_align (fragS *fragP) { if (linkrelax - && !get_frag_is_literal (fragP) + && ! fragP->tc_frag_data.is_literal && (fragP->fr_type == rs_align || fragP->fr_type == rs_align_code) && fragP->fr_address + fragP->fr_fix > 0 @@ -6733,7 +6640,8 @@ relaxation_requirements (vliw_insn *vinsn) } else { - if (workaround_b_j_loop_end && is_jx_opcode (tinsn->opcode) + if (workaround_b_j_loop_end + && tinsn->opcode == xtensa_jx_opcode && use_transform ()) { /* Add 2 of these. */ @@ -6818,7 +6726,9 @@ emit_single_op (TInsn *orig_insn) Because the scheduling and bundling characteristics of movi and l32r or const16 are so different, we can do much better if we relax it prior to scheduling and bundling, rather than after. */ - if (is_movi_opcode (orig_insn->opcode) && !cur_vinsn.inside_bundle + if ((orig_insn->opcode == xtensa_movi_opcode + || orig_insn->opcode == xtensa_movi_n_opcode) + && !cur_vinsn.inside_bundle && (orig_insn->tok[1].X_op == O_symbol || orig_insn->tok[1].X_op == O_pltrel)) xg_assembly_relax (&istack, orig_insn, now_seg, frag_now, 0, 1, 0); @@ -6894,9 +6804,9 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) } if (frag_now_fix () != 0 - && (!get_frag_is_insn (frag_now) + && (! frag_now->tc_frag_data.is_insn || (vinsn_has_specific_opcodes (vinsn) && use_transform ()) - || !use_transform () != get_frag_is_no_transform (frag_now) + || !use_transform () != frag_now->tc_frag_data.is_no_transform || (directive_state[directive_absolute_literals] != frag_now->tc_frag_data.use_absolute_literals))) { @@ -6970,7 +6880,7 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) xtensa_move_labels (frag_now, 0, FALSE); } - if (is_entry_opcode (vinsn->slots[0].opcode) + if (vinsn->slots[0].opcode == xtensa_entry_opcode && !vinsn->slots[0].is_specific_opcode) { xtensa_mark_literal_pool_location (); @@ -7034,7 +6944,7 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) } if (vinsn_has_specific_opcodes (vinsn) && use_transform ()) - set_frag_is_specific_opcode (frag_now, TRUE); + frag_now->tc_frag_data.is_specific_opcode = TRUE; if (finish_frag) { @@ -7109,7 +7019,7 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) if (do_align_targets () && xtensa_opcode_is_call (isa, vinsn->slots[0].opcode) == 1) { - float freq = get_subseg_info (now_seg, now_subseg)->cur_total_freq; + float freq = get_subseg_total_freq (now_seg, now_subseg); frag_now->tc_frag_data.is_insn = TRUE; frag_var (rs_machine_dependent, 4, (int) freq, RELAX_DESIRE_ALIGN, frag_now->fr_symbol, frag_now->fr_offset, NULL); @@ -7438,7 +7348,7 @@ xtensa_fix_a0_b_retw_frags (void) { if (next_instrs_are_b_retw (fragP)) { - if (get_frag_is_no_transform (fragP)) + if (fragP->tc_frag_data.is_no_transform) as_bad (_("instruction sequence (write a0, branch, retw) may trigger hardware errata")); else relax_frag_add_nop (fragP); @@ -7513,7 +7423,7 @@ next_instrs_are_b_retw (fragS *fragP) xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf); opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf); - if (is_windowed_return_opcode (opcode)) + if (opcode == xtensa_retw_opcode || opcode == xtensa_retw_n_opcode) return TRUE; return FALSE; @@ -7546,7 +7456,7 @@ xtensa_fix_b_j_loop_end_frags (void) { if (next_instr_is_loop_end (fragP)) { - if (get_frag_is_no_transform (fragP)) + if (fragP->tc_frag_data.is_no_transform) as_bad (_("branching or jumping to a loop end may trigger hardware errata")); else relax_frag_add_nop (fragP); @@ -7644,7 +7554,7 @@ xtensa_fix_close_loop_end_frags (void) if (min_bytes < REQUIRED_LOOP_DIVIDING_BYTES) { - if (get_frag_is_no_transform (fragP)) + if (fragP->tc_frag_data.is_no_transform) as_bad (_("loop end too close to another loop end may trigger hardware errata")); else { @@ -7824,9 +7734,9 @@ xtensa_fix_short_loop_frags (void) && (branch_before_loop_end (fragP->fr_next) || (workaround_all_short_loops && current_opcode != XTENSA_UNDEFINED - && !is_the_loop_opcode (current_opcode)))) + && current_opcode != xtensa_loop_opcode))) { - if (get_frag_is_no_transform (fragP)) + if (fragP->tc_frag_data.is_no_transform) as_bad (_("loop containing less than three instructions may trigger hardware errata")); else relax_frag_add_nop (fragP); @@ -9116,7 +9026,7 @@ relax_frag_immed (segT segP, if (estimate_only && xtensa_opcode_is_loop (isa, tinsn.opcode)) return 0; - if (workaround_b_j_loop_end && !get_frag_is_no_transform (fragP)) + if (workaround_b_j_loop_end && ! fragP->tc_frag_data.is_no_transform) branch_jmp_to_next = is_branch_jmp_to_next (&tinsn, fragP); negatable_branch = (xtensa_opcode_is_branch (isa, tinsn.opcode) == 1); @@ -9487,7 +9397,7 @@ convert_frag_immed (segT segP, is_loop = xtensa_opcode_is_loop (xtensa_default_isa, orig_tinsn.opcode) == 1; - if (workaround_b_j_loop_end && !get_frag_is_no_transform (fragP)) + if (workaround_b_j_loop_end && ! fragP->tc_frag_data.is_no_transform) branch_jmp_to_next = is_branch_jmp_to_next (&orig_tinsn, fragP); if (branch_jmp_to_next && !next_frag_is_loop_target (fragP)) @@ -9796,8 +9706,6 @@ fix_new_exp_in_seg (segT new_seg, label: */ -static offsetT get_expression_value (segT, expressionS *); - static void convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) { @@ -9831,7 +9739,21 @@ convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) addmi_offset += loop_offset; assert (tinsn->ntok == 2); - target = get_expression_value (segP, &tinsn->tok[1]); + if (tinsn->tok[1].X_op == O_constant) + target = tinsn->tok[1].X_add_number; + else if (tinsn->tok[1].X_op == O_symbol) + { + /* Find the fragment. */ + symbolS *sym = tinsn->tok[1].X_add_symbol; + assert (S_GET_SEGMENT (sym) == segP + || S_GET_SEGMENT (sym) == absolute_section); + target = (S_GET_VALUE (sym) + tinsn->tok[1].X_add_number); + } + else + { + as_bad (_("invalid expression evaluation type %d"), tinsn->tok[1].X_op); + target = 0; + } know (symbolP); know (symbolP->sy_frag); @@ -9878,7 +9800,7 @@ convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) for (next_fragP = fragP; next_fragP != NULL; next_fragP = next_fragP->fr_next) { - set_frag_is_no_transform (next_fragP, TRUE); + next_fragP->tc_frag_data.is_no_transform = TRUE; if (next_fragP->tc_frag_data.is_loop_target) target_count++; if (target_count == 2) @@ -9886,27 +9808,27 @@ convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) } } + +/* A map that keeps information on a per-subsegment basis. This is + maintained during initial assembly, but is invalid once the + subsegments are smashed together. I.E., it cannot be used during + the relaxation. */ -static offsetT -get_expression_value (segT segP, expressionS *exp) +typedef struct subseg_map_struct { - if (exp->X_op == O_constant) - return exp->X_add_number; - if (exp->X_op == O_symbol) - { - /* Find the fragment. */ - symbolS *sym = exp->X_add_symbol; + /* the key */ + segT seg; + subsegT subseg; - assert (S_GET_SEGMENT (sym) == segP - || S_GET_SEGMENT (sym) == absolute_section); + /* the data */ + unsigned flags; + float total_freq; /* fall-through + branch target frequency */ + float target_freq; /* branch target frequency alone */ + + struct subseg_map_struct *next; +} subseg_map; - return (S_GET_VALUE (sym) + exp->X_add_number); - } - as_bad (_("invalid expression evaluation type %d"), exp->X_op); - return 0; -} - static subseg_map *sseg_map = NULL; static subseg_map * @@ -9917,20 +9839,25 @@ get_subseg_info (segT seg, subsegT subseg) for (subseg_e = sseg_map; subseg_e; subseg_e = subseg_e->next) { if (seg == subseg_e->seg && subseg == subseg_e->subseg) - return subseg_e; + break; } - - subseg_e = (subseg_map *) xmalloc (sizeof (subseg_map)); + return subseg_e; +} + + +static subseg_map * +add_subseg_info (segT seg, subsegT subseg) +{ + subseg_map *subseg_e = (subseg_map *) xmalloc (sizeof (subseg_map)); memset (subseg_e, 0, sizeof (subseg_map)); subseg_e->seg = seg; subseg_e->subseg = subseg; subseg_e->flags = 0; /* Start off considering every branch target very important. */ - subseg_e->cur_target_freq = 1.0; - subseg_e->cur_total_freq = 1.0; + subseg_e->target_freq = 1.0; + subseg_e->total_freq = 1.0; subseg_e->next = sseg_map; sseg_map = subseg_e; - return subseg_e; } @@ -9939,7 +9866,9 @@ static unsigned get_last_insn_flags (segT seg, subsegT subseg) { subseg_map *subseg_e = get_subseg_info (seg, subseg); - return subseg_e->flags; + if (subseg_e) + return subseg_e->flags; + return 0; } @@ -9950,12 +9879,45 @@ set_last_insn_flags (segT seg, bfd_boolean val) { subseg_map *subseg_e = get_subseg_info (seg, subseg); + if (! subseg_e) + subseg_e = add_subseg_info (seg, subseg); if (val) subseg_e->flags |= fl; else subseg_e->flags &= ~fl; } + +static float +get_subseg_total_freq (segT seg, subsegT subseg) +{ + subseg_map *subseg_e = get_subseg_info (seg, subseg); + if (subseg_e) + return subseg_e->total_freq; + return 1.0; +} + + +static float +get_subseg_target_freq (segT seg, subsegT subseg) +{ + subseg_map *subseg_e = get_subseg_info (seg, subseg); + if (subseg_e) + return subseg_e->target_freq; + return 1.0; +} + + +static void +set_subseg_freq (segT seg, subsegT subseg, float total_f, float target_f) +{ + subseg_map *subseg_e = get_subseg_info (seg, subseg); + if (! subseg_e) + subseg_e = add_subseg_info (seg, subseg); + subseg_e->total_freq = total_f; + subseg_e->target_freq = target_f; +} + /* Segment Lists and emit_state Stuff. */ @@ -10182,22 +10144,22 @@ xtensa_reorder_seg_list (seg_list *head, segT after) /* Push all the literal segments to the end of the gnu list. */ -static segT get_last_sec (void); - static void xtensa_reorder_segments (void) { segT sec; - segT last_sec; + segT last_sec = 0; int old_count = 0; int new_count = 0; for (sec = stdoutput->sections; sec != NULL; sec = sec->next) - old_count++; + { + last_sec = sec; + old_count++; + } /* Now that we have the last section, push all the literal sections to the end. */ - last_sec = get_last_sec (); xtensa_reorder_seg_list (literal_head, last_sec); xtensa_reorder_seg_list (init_literal_head, last_sec); xtensa_reorder_seg_list (fini_literal_head, last_sec); @@ -10209,17 +10171,6 @@ xtensa_reorder_segments (void) } -static segT -get_last_sec (void) -{ - segT last_sec = stdoutput->sections; - while (last_sec->next != NULL) - last_sec = last_sec->next; - - return last_sec; -} - - /* Change the emit state (seg, subseg, and frag related stuff) to the correct location. Return a emit_state which can be passed to xtensa_restore_emit_state to return to current fragment. */ @@ -10345,82 +10296,46 @@ xtensa_restore_emit_state (emit_state *state) /* Get a segment of a given name. If the segment is already present, return it; otherwise, create a new one. */ -static segT retrieve_literal_seg (seg_list *, const char *, bfd_boolean); - static void cache_literal_section (seg_list *head, const char *name, - segT *seg, + segT *pseg, bfd_boolean is_code) { segT current_section = now_seg; int current_subsec = now_subseg; + segT seg; - if (*seg != 0) + if (*pseg != 0) return; - *seg = retrieve_literal_seg (head, name, is_code); - subseg_set (current_section, current_subsec); -} - - -/* Get a segment of a given name. If the segment is already - present, return it; otherwise, create a new one. */ - -static segT seg_present (const char *); -static void add_seg_list (seg_list *, segT); -static segT -retrieve_literal_seg (seg_list *head, const char *name, bfd_boolean is_code) -{ - segT ret = 0; + /* Check if the named section exists. */ + for (seg = stdoutput->sections; seg; seg = seg->next) + { + if (!strcmp (segment_name (seg), name)) + break; + } - ret = seg_present (name); - if (!ret) + if (!seg) { - ret = subseg_new (name, (subsegT) 0); + /* Create a new literal section. */ + seg = subseg_new (name, (subsegT) 0); if (head) - add_seg_list (head, ret); - bfd_set_section_flags (stdoutput, ret, SEC_HAS_CONTENTS | + { + /* Add the newly created literal segment to the specified list. */ + seg_list *n = (seg_list *) xmalloc (sizeof (seg_list)); + n->seg = seg; + n->next = head->next; + head->next = n; + } + bfd_set_section_flags (stdoutput, seg, SEC_HAS_CONTENTS | SEC_READONLY | SEC_ALLOC | SEC_LOAD | (is_code ? SEC_CODE : SEC_DATA)); - bfd_set_section_alignment (stdoutput, ret, 2); - } - - return ret; -} - - -/* Return a segment of a given name if it is present. */ - -static segT -seg_present (const char *name) -{ - segT seg; - seg = stdoutput->sections; - - while (seg) - { - if (!strcmp (segment_name (seg), name)) - return seg; - seg = seg->next; + bfd_set_section_alignment (stdoutput, seg, 2); } - return 0; -} - - -/* Add a segment to a segment list. */ - -static void -add_seg_list (seg_list *head, segT seg) -{ - seg_list *n; - n = (seg_list *) xmalloc (sizeof (seg_list)); - assert (n); - - n->seg = seg; - n->next = head->next; - head->next = n; + *pseg = seg; + subseg_set (current_section, current_subsec); } @@ -10433,6 +10348,7 @@ add_seg_list (seg_list *head, segT seg) typedef bfd_boolean (*frag_predicate) (const fragS *); typedef void (*frag_flags_fn) (const fragS *, frag_flags *); +static bfd_boolean get_frag_is_literal (const fragS *); static void xtensa_create_property_segments (frag_predicate, frag_predicate, const char *, xt_section_type); static void xtensa_create_xproperty_segments @@ -10486,35 +10402,6 @@ get_frag_is_literal (const fragS *fragP) } -static bfd_boolean -get_frag_is_insn (const fragS *fragP) -{ - assert (fragP != NULL); - return fragP->tc_frag_data.is_insn; -} - - -static bfd_boolean -get_frag_is_no_transform (fragS *fragP) -{ - return fragP->tc_frag_data.is_no_transform; -} - - -static void -set_frag_is_specific_opcode (fragS *fragP, bfd_boolean is_specific_opcode) -{ - fragP->tc_frag_data.is_specific_opcode = is_specific_opcode; -} - - -static void -set_frag_is_no_transform (fragS *fragP, bfd_boolean is_no_transform) -{ - fragP->tc_frag_data.is_no_transform = is_no_transform; -} - - static void xtensa_create_property_segments (frag_predicate property_function, frag_predicate end_property_function, diff --git a/gas/config/tc-xtensa.h b/gas/config/tc-xtensa.h index 0bd19a32933..cdf5cc27be1 100644 --- a/gas/config/tc-xtensa.h +++ b/gas/config/tc-xtensa.h @@ -40,7 +40,7 @@ struct fix; /* Maximum number of opcode slots in a VLIW instruction. */ -#define MAX_SLOTS 31 +#define MAX_SLOTS 15 /* For all xtensa relax states except RELAX_DESIRE_ALIGN and