From: Nick Clifton Date: Wed, 17 Dec 2003 09:41:07 +0000 (+0000) Subject: Replace --error-explicit-parallel-conflicts with --ignore-parallel-conflitcs. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b145f546d404da31c1ae51e7462ee8ec75e61929;p=binutils-gdb.git Replace --error-explicit-parallel-conflicts with --ignore-parallel-conflitcs. Add test of parallel constraint checking. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index 53f129476a2..b1add1e2162 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,17 @@ +2003-12-17 Nick Clifton + + * config/tc-m32r.c (error_explicit_parallel_conflicts): Rename + to 'ignore_parallel_conflicts'. + (md_longopts): Change option names as well. + (md_parse_option): Separate the warn_explicit and ignore + parallel conflicts options. + (md_show_usage): Update descriptions of these options. + (first_writes_to_seconds_operands): Do not run this check if + ignoring parallel conflicts. + (assemble_two_insns): Remove code that checked + error_explicit_parallel_conflicts. + * doc/c-m32r.texi: Update descriptions of the options. + 2003-12-16 Dmitry Semyonov * tc-arm.c (do_adr): Do not adjust pc by -8 if TE_WINCE is diff --git a/gas/config/tc-m32r.c b/gas/config/tc-m32r.c index 58f90541d28..90fb28d67d7 100644 --- a/gas/config/tc-m32r.c +++ b/gas/config/tc-m32r.c @@ -116,9 +116,12 @@ static int enable_special_float = 0; instruction might have constraint violations. */ static int warn_explicit_parallel_conflicts = 1; -/* Non-zero if the programmer should receive an error message when an - explicit parallel instruction might have constraint violations. */ -static int error_explicit_parallel_conflicts = 1; +/* Non-zero if the programmer should not receive any messages about + parallel instruction with potential or real constraint violations. + The ability to suppress these messages is intended only for hardware + vendors testing the chip. It superceedes + warn_explicit_parallel_conflicts. */ +static int ignore_parallel_conflicts = 0; /* Non-zero if insns can be made parallel. */ static int use_parallel = 1; @@ -197,22 +200,22 @@ const char *md_shortopts = M32R_SHORTOPTS; struct option md_longopts[] = { -#define OPTION_M32R (OPTION_MD_BASE) -#define OPTION_M32RX (OPTION_M32R + 1) -#define OPTION_M32R2 (OPTION_M32RX + 1) -#define OPTION_BIG (OPTION_M32R2 + 1) -#define OPTION_LITTLE (OPTION_BIG + 1) -#define OPTION_PARALLEL (OPTION_LITTLE + 1) -#define OPTION_NO_PARALLEL (OPTION_PARALLEL + 1) -#define OPTION_WARN_PARALLEL (OPTION_NO_PARALLEL + 1) -#define OPTION_NO_WARN_PARALLEL (OPTION_WARN_PARALLEL + 1) -#define OPTION_ERROR_PARALLEL (OPTION_NO_WARN_PARALLEL + 1) -#define OPTION_NO_ERROR_PARALLEL (OPTION_ERROR_PARALLEL + 1) -#define OPTION_SPECIAL (OPTION_NO_ERROR_PARALLEL + 1) -#define OPTION_SPECIAL_M32R (OPTION_SPECIAL + 1) -#define OPTION_SPECIAL_FLOAT (OPTION_SPECIAL_M32R + 1) -#define OPTION_WARN_UNMATCHED (OPTION_SPECIAL_FLOAT + 1) -#define OPTION_NO_WARN_UNMATCHED (OPTION_WARN_UNMATCHED + 1) +#define OPTION_M32R (OPTION_MD_BASE) +#define OPTION_M32RX (OPTION_M32R + 1) +#define OPTION_M32R2 (OPTION_M32RX + 1) +#define OPTION_BIG (OPTION_M32R2 + 1) +#define OPTION_LITTLE (OPTION_BIG + 1) +#define OPTION_PARALLEL (OPTION_LITTLE + 1) +#define OPTION_NO_PARALLEL (OPTION_PARALLEL + 1) +#define OPTION_WARN_PARALLEL (OPTION_NO_PARALLEL + 1) +#define OPTION_NO_WARN_PARALLEL (OPTION_WARN_PARALLEL + 1) +#define OPTION_IGNORE_PARALLEL (OPTION_NO_WARN_PARALLEL + 1) +#define OPTION_NO_IGNORE_PARALLEL (OPTION_IGNORE_PARALLEL + 1) +#define OPTION_SPECIAL (OPTION_NO_IGNORE_PARALLEL + 1) +#define OPTION_SPECIAL_M32R (OPTION_SPECIAL + 1) +#define OPTION_SPECIAL_FLOAT (OPTION_SPECIAL_M32R + 1) +#define OPTION_WARN_UNMATCHED (OPTION_SPECIAL_FLOAT + 1) +#define OPTION_NO_WARN_UNMATCHED (OPTION_WARN_UNMATCHED + 1) {"m32r", no_argument, NULL, OPTION_M32R}, {"m32rx", no_argument, NULL, OPTION_M32RX}, {"m32r2", no_argument, NULL, OPTION_M32R2}, @@ -226,10 +229,10 @@ struct option md_longopts[] = {"Wp", no_argument, NULL, OPTION_WARN_PARALLEL}, {"no-warn-explicit-parallel-conflicts", no_argument, NULL, OPTION_NO_WARN_PARALLEL}, {"Wnp", no_argument, NULL, OPTION_NO_WARN_PARALLEL}, - {"error-explicit-parallel-conflicts", no_argument, NULL, OPTION_ERROR_PARALLEL}, - {"Ep", no_argument, NULL, OPTION_ERROR_PARALLEL}, - {"no-error-explicit-parallel-conflicts", no_argument, NULL, OPTION_NO_ERROR_PARALLEL}, - {"Enp", no_argument, NULL, OPTION_NO_ERROR_PARALLEL}, + {"ignore-parallel-conflicts", no_argument, NULL, OPTION_IGNORE_PARALLEL}, + {"Ip", no_argument, NULL, OPTION_IGNORE_PARALLEL}, + {"no-ignore-parallel-conflicts", no_argument, NULL, OPTION_NO_IGNORE_PARALLEL}, + {"nIp", no_argument, NULL, OPTION_NO_IGNORE_PARALLEL}, {"hidden", no_argument, NULL, OPTION_SPECIAL}, {"bitinst", no_argument, NULL, OPTION_SPECIAL_M32R}, {"float", no_argument, NULL, OPTION_SPECIAL_FLOAT}, @@ -318,22 +321,18 @@ md_parse_option (c, arg) case OPTION_WARN_PARALLEL: warn_explicit_parallel_conflicts = 1; - error_explicit_parallel_conflicts = 0; break; case OPTION_NO_WARN_PARALLEL: warn_explicit_parallel_conflicts = 0; - error_explicit_parallel_conflicts = 0; break; - case OPTION_ERROR_PARALLEL: - warn_explicit_parallel_conflicts = 1; - error_explicit_parallel_conflicts = 1; + case OPTION_IGNORE_PARALLEL: + ignore_parallel_conflicts = 1; break; - case OPTION_NO_ERROR_PARALLEL: - error_explicit_parallel_conflicts = 0; - warn_explicit_parallel_conflicts = 0; + case OPTION_NO_IGNORE_PARALLEL: + ignore_parallel_conflicts = 0; break; case OPTION_SPECIAL: @@ -406,27 +405,27 @@ md_show_usage (stream) fprintf (stream, _("\ -warn-explicit-parallel-conflicts warn when parallel instructions\n")); fprintf (stream, _("\ - violate contraints\n")); + might violate contraints\n")); fprintf (stream, _("\ -no-warn-explicit-parallel-conflicts do not warn when parallel\n")); fprintf (stream, _("\ - instructions violate contraints\n")); + instructions might violate contraints\n")); fprintf (stream, _("\ -Wp synonym for -warn-explicit-parallel-conflicts\n")); fprintf (stream, _("\ -Wnp synonym for -no-warn-explicit-parallel-conflicts\n")); fprintf (stream, _("\ - -error-explicit-parallel-conflicts error when parallel instructions\n")); + -ignore-parallel-conflicts do not check parallel instructions\n")); fprintf (stream, _("\ - violate contraints\n")); + fo contraint violations\n")); fprintf (stream, _("\ - -no-error-explicit-parallel-conflicts do not error when parallel\n")); + -no-ignore-parallel-conflicts check parallel instructions for\n")); fprintf (stream, _("\ - instructions violate contraints\n")); + contraint violations\n")); fprintf (stream, _("\ - -Ep synonym for -error-explicit-parallel-conflicts\n")); + -Ip synonym for -ignore-parallel-conflicts\n")); fprintf (stream, _("\ - -Enp synonym for -no-error-explicit-parallel-conflicts\n")); + -nIp synonym for -no-ignore-parallel-conflicts\n")); fprintf (stream, _("\ -warn-unmatched-high warn when an (s)high reloc has no matching low reloc\n")); @@ -756,6 +755,9 @@ first_writes_to_seconds_operands (a, b, check_outputs) const CGEN_OPINST *b_ops = CGEN_INSN_OPERANDS (b->insn); int a_index; + if (ignore_parallel_conflicts) + return 0; + /* If at least one of the instructions takes no operands, then there is nothing to check. There really are instructions without operands, eg 'nop'. */ @@ -870,7 +872,7 @@ can_make_parallel (a, b) abort (); if (first_writes_to_seconds_operands (a, b, TRUE)) - return _("Instructions write to the same destination register."); + return _("instructions write to the same destination register."); a_pipe = CGEN_INSN_ATTR_VALUE (a->insn, CGEN_INSN_PIPE); b_pipe = CGEN_INSN_ATTR_VALUE (b->insn, CGEN_INSN_PIPE); @@ -1154,17 +1156,13 @@ assemble_two_insns (str, str2, parallel_p) if (parallel_p && warn_explicit_parallel_conflicts) { - void (* func)(const char *, ...); - - func = error_explicit_parallel_conflicts ? as_bad : as_warn; - if (first_writes_to_seconds_operands (&first, &second, FALSE)) /* xgettext:c-format */ - func (_("%s: output of 1st instruction is the same as an input to 2nd instruction - is this intentional ?"), str2); + as_warn (_("%s: output of 1st instruction is the same as an input to 2nd instruction - is this intentional ?"), str2); if (first_writes_to_seconds_operands (&second, &first, FALSE)) /* xgettext:c-format */ - func (_("%s: output of 2nd instruction is the same as an input to 1st instruction - is this intentional ?"), str2); + as_warn (_("%s: output of 2nd instruction is the same as an input to 1st instruction - is this intentional ?"), str2); } if (!parallel_p diff --git a/gas/doc/c-m32r.texi b/gas/doc/c-m32r.texi index 1324cd7f620..81590902e79 100644 --- a/gas/doc/c-m32r.texi +++ b/gas/doc/c-m32r.texi @@ -119,27 +119,26 @@ questionable parallel instructions are encountered. This is a shorter synonym for the @emph{-no-warn-explicit-parallel-conflicts} option. -@item -error-explicit-parallel-conflicts -@cindex @samp{-error-explicit-parallel-conflicts} option, M32RX -This option performs the same thing as the -@emph{-warn-explicit-parallel-conflicts} expcept that instead of -warning messages being produced, error messages will be produced. If -any error messages are generated then GAS will not produce an output -file. - -@item -no-error-explicit-parallel-conflicts -@cindex @samp{-no-error-explicit-parallel-conflicts} option, M32RX -This option disables a previously enabled -@emph{-error-explicit-parallel-conflicts} option. - -@item -Ep -@cindex @samp{-Ep} option, M32RX -This is a shorter synonym for the @emph{-error-explicit-parallel-conflicts} +@item -ignore-parallel-conflicts +@cindex @samp{-ignore-parallel-conflicts} option, M32RX +This option tells the assembler's to stop checking parallel +instructions for contraint violations. This ability is provided for +hardware vendors testing chip designs and should not be used under +normal circumstances. + +@item -no-ignore-parallel-conflicts +@cindex @samp{-no-ignore-parallel-conflicts} option, M32RX +This option restores the assembler's default behaviour of checking +parallel instructions to detect constraint violations. + +@item -Ip +@cindex @samp{-Ip} option, M32RX +This is a shorter synonym for the @emph{-ignore-parallel-conflicts} option. -@item -Enp -@cindex @samp{-Enp} option, M32RX -This is a shorter synonym for the @emph{-no-error-explicit-parallel-conflicts} +@item -nIp +@cindex @samp{-nIp} option, M32RX +This is a shorter synonym for the @emph{-no-ignore-parallel-conflicts} option. @item -warn-unmatched-high diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog index f888a80ada5..b6060430e12 100644 --- a/gas/testsuite/ChangeLog +++ b/gas/testsuite/ChangeLog @@ -1,3 +1,9 @@ +2003-12-17 Nick Clifton + + * gas/m32r/error.exp: Add parallel.s + * gas/m32r/parallel.s: New file: Test warning and error + messages produced for parallel conflicts. + 2003-12-16 Nick Clifton * gas/arm/arm.exp: Run special versions of the inst, ldconst, diff --git a/gas/testsuite/gas/m32r/error.exp b/gas/testsuite/gas/m32r/error.exp index a188719b74c..17807c12bee 100644 --- a/gas/testsuite/gas/m32r/error.exp +++ b/gas/testsuite/gas/m32r/error.exp @@ -9,6 +9,7 @@ if [istarget m32r-*-*] { dg-runtest "$srcdir/$subdir/wrongsize.s" "" "" dg-runtest "$srcdir/$subdir/interfere.s" "" "" dg-runtest "$srcdir/$subdir/outofrange.s" "" "" + dg-runtest "$srcdir/$subdir/parallel.s" "" "" dg-finish diff --git a/gas/testsuite/gas/m32r/parallel.s b/gas/testsuite/gas/m32r/parallel.s new file mode 100644 index 00000000000..38a08a2e98d --- /dev/null +++ b/gas/testsuite/gas/m32r/parallel.s @@ -0,0 +1,14 @@ +; Test error messages where parallel instructions conflict + +; { dg-options "-m32rx" } +; { dg-do assemble { target m32r-*-* } } + + .text + .global parallel +parallel: + mv r1,r0 || mv r2,r1 + ; { dg-warning "output of 1st instruction" "parallel output overlaps input" { target *-*-* } { 9 } } + mv r1,r0 || mv r0,r2 + ; { dg-warning "output of 2nd instruction" "parallel output overlaps input" { target *-*-* } { 11 } } + mv r1,r0 || mv r1,r2 + ; { dg-error "instructions write to the same destination register" "parallel overlapping destinations" { target *-*-* } { 13 } }