From: Roland Pesch Date: Sat, 5 Sep 1992 02:00:29 +0000 (+0000) Subject: Fri Sep 4 18:53:57 1992 Roland H. Pesch (pesch@fowanton.cygnus.com) X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b21b18e18d6d54c57d7726525185dd9cc30ad2b6;p=binutils-gdb.git Fri Sep 4 18:53:57 1992 Roland H. Pesch (pesch@fowanton.cygnus.com) * doc/gdb.texinfo: fix shameful error of agreement reported by jimb@occs.cs.oberlin.edu (Jim Blandy) * doc/gdb.texinfo: remove old partial discussion of remote serial protocol (via serial debug stubs) * doc/gdbinv-m.m4.in, doc/gdbinv-s.m4.in: new section discussing use of serial debug stubs --- diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 3e7ed8020ff..8902cb5ce0a 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -1,6 +1,6 @@ _dnl__ -*-Texinfo-*- _dnl__ Copyright (c) 1988 1989 1990 1991 1992 Free Software Foundation, Inc. -_dnl__ $Id$ +_dnl__ $Id$<>_dnl__ \input texinfo @c -*-texinfo-*- @c Copyright (c) 1988 1989 1990 1991 1992 Free Software Foundation, Inc. @c %**start of header @@ -321,12 +321,12 @@ Using the new command @code{target}, you can select at runtime whether you are debugging local files, local processes, standalone systems over a serial port, realtime systems over a TCP/IP connection, etc. The command @code{load} can download programs into a remote system. Serial -stubs are available for Motorola 680x0 and Intel 80386 remote systems; -GDB also supports debugging realtime processes running under +stubs are available for Motorola 680x0, Intel 80386, and Sparc remote +systems; GDB also supports debugging realtime processes running under VxWorks, using SunRPC Remote Procedure Calls over TCP/IP to talk to a -debugger stub on the target system. Internally, GDB now uses a -function vector to mediate access to different targets; if you need to -add your own support for a remote protocol, this makes it much easier. +debugger stub on the target system. Internally, GDB now uses a function +vector to mediate access to different targets; if you need to add your +own support for a remote protocol, this makes it much easier. @item Watchpoints GDB now sports watchpoints as well as breakpoints. You can use a @@ -6562,46 +6562,6 @@ not specific to any particular target system) which you can use if you write the remote stubs---the code that will run on the remote system to communicate with GDB. -To use the GDB remote serial protocol, the program to be debugged on -the remote machine needs to contain a debugging stub which talks to -GDB over the serial line. Several working remote stubs are -distributed with GDB; see the @file{README} file in the GDB -distribution for more information. - -For details of this communication protocol, see the comments in the -GDB source file @file{remote.c}. - -To start remote debugging, first run GDB and specify as an executable file -the program that is running in the remote machine. This tells GDB how -to find your program's symbols and the contents of its pure text. Then -establish communication using the @code{target remote} command with a device -name as an argument. For example: - -@example -target remote /dev/ttyb -@end example - -@noindent -if the serial line is connected to the device named @file{/dev/ttyb}. This -will stop the remote machine if it is not already stopped. - -Now you can use all the usual commands to examine and change data and to -step and continue the remote program. - -To resume the remote program and stop debugging it, use the @code{detach} -command. - -@kindex set remotedebug -@kindex show remotedebug -@cindex packets, reporting on stdout -@cindex serial connections, debugging -If you have trouble with the serial connection, you can use the command -@code{set remotedebug}. This makes _GDBN__ report on all packets sent -back and forth across the serial line to the remote machine. The -packet-debugging information is printed on the _GDBN__ standard output -stream. @code{set remotedebug off} turns it off, and @code{show -remotedebug} will show you its current state. - Other remote targets may be available in your configuration of GDB; use @code{help targets} to list them. @@ -6887,7 +6847,7 @@ complaints from being suppressed. Displays how many symbol complaints _GDBN__ is permitted to produce. @end table -By default, _GDBN__ is cautious, and asks what sometimes seem to be a +By default, _GDBN__ is cautious, and asks what sometimes seems to be a lot of stupid questions to confirm certain commands. For example, if you try to run a program which is already running: diff --git a/gdb/doc/gdbinv-m.m4.in b/gdb/doc/gdbinv-m.m4.in index 65e446d6825..181530a6804 100644 --- a/gdb/doc/gdbinv-m.m4.in +++ b/gdb/doc/gdbinv-m.m4.in @@ -2,11 +2,12 @@ _dnl__ -*- Texinfo -*- _dnl__ Copyright (c) 1991 Free Software Foundation, Inc. _dnl__ This file is part of the source for the GDB manual. _dnl__ M4 FRAGMENT: $Id$ +* Remote Serial:: _GDBN__ remote serial protocol _if__(_I960__) -* i960-Nindy Remote:: _GDBN__ with a Remote i960 (Nindy) +* i960-Nindy Remote:: _GDBN__ with a remote i960 (Nindy) _fi__(_I960__) _if__(_AMD29K__) -* EB29K Remote:: _GDBN__ with a Remote EB29K +* EB29K Remote:: _GDBN__ with a remote EB29K _fi__(_AMD29K__) _if__(_VXWORKS__) * VxWorks Remote:: _GDBN__ and VxWorks diff --git a/gdb/doc/gdbinv-s.m4.in b/gdb/doc/gdbinv-s.m4.in index 18c2aff9462..f2f4cef5560 100644 --- a/gdb/doc/gdbinv-s.m4.in +++ b/gdb/doc/gdbinv-s.m4.in @@ -5,6 +5,360 @@ _dnl__ M4 FRAGMENT $Id$ _dnl__ This text diverted to "Remote Debugging" section in general case; _dnl__ however, if we're doing a manual specifically for one of these, it _dnl__ belongs up front (in "Getting In and Out" chapter). +@node Remote Serial +@subsection The _GDBN__ remote serial protocol + +@cindex remote serial debugging, overview +To debug a program running on another machine (the debugging +@dfn{target} machine), you must first arrange for all the usual +prerequisites for the program to run by itself. For example, for a C +program, you need + +@enumerate +@item +A startup routine to set up the C runtime environment; these usually +have a name like @file{crt0}. The startup routine may be supplied by +your hardware supplier, or you may have to write your own. + +@item +You probably need a C subroutine library to support your program's +subroutine calls, notably managing input and output. + +@item +A way of getting your program to the other machine---for example, a +download program. These are often supplied by the hardware +manufacturer, but you may have to write your own from hardware +documentation. +@end enumerate + +The next step is to arrange for your program to use a serial port to +communicate with the machine where _GDBN__ is running (the @dfn{host} +machine). In general terms, the scheme looks like this: + +@table @emph +@item On the host, +_GDBN__ already understands how to use this protocol; when everything +else is set up, you can simply use the @samp{target remote} command +(@pxref{Targets,,Specifying a Debugging Target}). + +@item On the target, +you must link with your program a few special-purpose subroutines that +implement the _GDBN__ remote serial protocol. The file containing these +subroutines is called a @dfn{debugging stub}. +@end table + +The debugging stub is specific to the architecture of the remote +machine; for example, use @file{sparc-stub.c} to debug programs on +@sc{sparc} boards. + +@cindex remote serial stub list +These working remote stubs are distributed with _GDBN__: + +@c FIXME! verify these... +@table @code +@item sparc-stub.c +@kindex sparc-stub.c +For @sc{sparc} architectures. + +@item m68-stub.c +@kindex m68-stub.c +For Motorola 680x0 architectures. + +@item i36-stub.c +@kindex i36-stub.c +For Intel 386 and compatible architectures. +@end table + +The @file{README} file in the _GDBN__ distribution may list other +recently added stubs. + +@menu +* stub contents:: What the stub can do for you +* bootstrapping:: What you must do for the stub +* debug session:: Putting it all together +* protocol:: Outline of the communication protocol +@end menu + +@node stub contents +@subsubsection What the stub can do for you + +@cindex remote serial stub +The debugging stub for your architecture supplies these three +subroutines: + +@table @code +@item handle_exception +@kindex handle_exception +@cindex remote serial stub, main routine +This is the central workhorse, but your program never calls it +explicitly---the setup code arranges for @code{handle_exception} to +run when a trap is triggered. + +@code{handle_exception} takes control when your program stops during +execution (for example, on a breakpoint), and mediates communications +with _GDBN__ on the host machine. This is where the communications +protocol is implemented; @code{handle_exception} acts as the _GDBN__ +representative on the target machine; it begins by sending summary +information on the state of your program, then continues to execute, +retrieving and transmitting any information _GDBN__ needs, until you +execute a _GDBN__ command that makes your program resume; at that point, +@code{handle_exception} returns control to your own code on the target +machine. + +@item set_debug_traps +@kindex set_debug_traps +@cindex remote serial stub, initialization +You must call this subroutine explicitly near the beginning of your +program. This is the routine that arranges to transfer control to +@code{handle_exception} when your program stops. + +@item breakpoint +@cindex @code{breakpoint} subroutine, remote +Use this auxiliary subroutine to make your program contain a +breakpoint. Depending on the particular situation, this may be the only +way for _GDBN__ to get control. For instance, if your target +machine has some sort of interrupt button, you won't need to call this; +pressing the interrupt button will transfer control to +@code{handle_exception}---in efect, to _GDBN__. On some machines, +simply receiving characters on the serial port may also trigger a trap; +again, in that situation, you don't need to call @code{breakpoint} from +your own program---simply running @samp{target remote} from the host +_GDBN__ session will get control. + +Call @code{breakpoint} if none of these is true, or if you simply want +to make certain your program stops at a predetermined point for the +start of your debugging session. + +@quotation +@emph{Warning:} when you set a breakpoint using this subroutine, it's a +little harder than usual to restart your program afterwards---because if +you simply @code{continue}, you will immediately run into the line of +your program that sets the breakpoint! + +To get past this, adjust the program counter manually to get past the +current instruction before issuing the @code{continue} command. For example, + +@example +(_GDBP__) p $pc = 4+$pc + +FIXME!!! Stu, I suspect I don't have this quite right. + Please supply the right incantation... presumably the + constant depends on instruction width, BTW? + Sample output would be nice too, so I don't have to make + up a ridiculous number. + +Nothing simpler works, right? Frinstance, an ignore count on the +continue would just keep stopping at the same place too? + +Whatta bout $pc++ ---does GDB know the instruction width as a "type" size? + +(_GDBP__) continue +@end example +@end quotation +@end table + +@node bootstrapping +@subsubsection What you must do for the stub + +@cindex remote stub, support routines +The debugging stubs that come with _GDBN__ are set up for a particular +chip architecture, but they have no information about the rest of your +debugging target machine. To allow the stub to work, you must supply +three special low-level subroutines, and make sure one library routine +is available. + +@table @code +@item int getDebugChar() +@kindex getDebugChar +Write this subroutine to read a single character from the serial port. +It may be identical to @code{getchar} for your target system; a +different name is used to allow you to distinguish the two if you wish. + +@item void putDebugChar(int) +@kindex putDebugChar +Write this subroutine to write a single character to the serial port. +It may be identical to @code{putchar} for your target system; a +different name is used to allow you to distinguish the two if you wish. + +@item void flush_i_cache() +@kindex flush_i_cache +Write this subroutine to flush the instruction cache, if any, on your +target machine. If there is no instruction cache, this subroutine may +be a no-op. + +On target machines that have instruction caches, _GDBN__ requires this +function to make certain that the state of your program is stable. + +@item void *memset(void *, int, int) +@kindex memset +This is the standard library function @code{memset} that sets an area of +memory to a known value. If you have one of the free versions of +@code{libc.a}, @code{memset} can be found there; otherwise, you must +either obtain it from your hardware manufacturer, or write your own. +@end table + +If you do not use the GNU C compiler, you may also need other standard +library subroutines; this will vary from one stub to another, but in +general the stubs are likely to use any of the common library +subroutines which @code{gcc} generates as inline code. + + +@node debug session +@subsubsection Putting it all together + +@cindex remote serial debugging summary +In summary, when your program is ready to debug, you must follow these +steps. + +@enumerate +@item +Make sure you have the supporting low-level routines: +@code{getDebugChar}, @code{putDebugChar}, @code{flush_i_cache}, +@code{memset}. + +@item +Insert these lines near the top of your program: + +@example +set_debug_traps(); +breakpoint(); +@end example + +@item +Compile and link together: your program, the _GDBN__ debugging stub for +your target architecture, and the supporting subroutines. + +@item +Make sure you have a serial connection between your target machine and +the _GDBN__ host, and identify the serial port used for this on the host. + +@item +Download your program to your target machine (or get it there by +whatever means the manufacturer provides), and start it. + +@item +To start remote debugging, run _GDBN__ on the host machine, and specify +as an executable file the program that is running in the remote machine. +This tells _GDBN__ how to find your program's symbols and the contents +of its pure text. + +Then establish communication using the @code{target remote} command. +Its argument is the name of the device you're using to control the +target machine. For example: + +@example +target remote /dev/ttyb +@end example + +@noindent +if the serial line is connected to the device named @file{/dev/ttyb}. +@ignore +@c this is from the old text, but it doesn't seem to make sense now that I've +@c seen an example... pesch 4sep1992 +This will stop the remote machine if it is not already stopped. +@end ignore + +@end enumerate + +Now you can use all the usual commands to examine and change data and to +step and continue the remote program. + +To resume the remote program and stop debugging it, use the @code{detach} +command. + +@node protocol +@subsubsection Outline of the communication protocol + +@cindex debugging stub, example +@cindex remote stub, example +@cindex stub example, remote debugging +The stub files provided with _GDBN__ implement the target side of the +communication protocol, and the _GDBN__ side is implemented in the +_GDBN__ source file @file{remote.c}. Normally, you can simply allow +these subroutines to communicate, and ignore the details. (If you're +implementing your own stub file, you can still ignore the details: start +with one of the existing stub files. @file{sparc-stub.c} is the best +organized, and therefore the easiest to read.) + +However, there may be occasions when you need to know something about +the protocol---for example, if there is only one serial port to your +target machine, you might want your program to do something special if +it recognizes a packet meant for _GDBN__. + +@cindex protocol, _GDBN__ remote serial +@cindex serial protocol, _GDBN__ remote +@cindex remote serial protocol +All _GDBN__ commands and responses (other than acknowledgements, which +are single characters) are sent as a packet which includes a +checksum. A packet is introduced with the character @samp{$}, and ends +with the character @samp{#} followed by a two-digit checksum: + +@example +$@var{packet info}#@var{checksum} +@end example + +@cindex checksum, for _GDBN__ remote +@noindent +@var{checksum} is computed as the modulo 256 sum of the @var{packet +info} characters. + +When either the host or the target machine receives a packet, the first +response expected is an acknowledgement: a single character, either +@samp{+} (to indicate the package was received correctly) or @samp{-} +(to request retransmission). + +The host (_GDBN__) sends commands, and the target (the debugging stub +incorporated in your program) sends data in response. The target also +sends data when your program stops. + +Command packets are distinguished by their first character, which +identifies the kind of command. + +These are the commands currently supported: + +@table @code +@item g +Requests the values of CPU registers. + +@item G +Sets the values of CPU registers. + +@item m@var{addr},@var{count} +Read @var{count} bytes at location @var{addr}. + +@item M@var{addr},@var{count}:@dots{} +Write @var{count} bytes at location @var{addr}. + +@item c +@itemx c@var{addr} +Resume execution at the current address (or at @var{addr} if supplied). + +@item s +@itemx s@var{addr} +Step the target program for one instruction, from either the current +program counter or from @var{addr} if supplied. + +@item k +Kill the target program. + +@item ? +Report the most recent signal. To allow you to take advantage of the +_GDBN__ signal handling commands, one of the functions of the debugging +stub is to report CPU traps as the corresponding POSIX signal values. +@end table + +@kindex set remotedebug +@kindex show remotedebug +@cindex packets, reporting on stdout +@cindex serial connections, debugging +If you have trouble with the serial connection, you can use the command +@code{set remotedebug}. This makes _GDBN__ report on all packets sent +back and forth across the serial line to the remote machine. The +packet-debugging information is printed on the _GDBN__ standard output +stream. @code{set remotedebug off} turns it off, and @code{show +remotedebug} will show you its current state. + + _if__(_I960__) @node i960-Nindy Remote @subsection _GDBN__ with a Remote i960 (Nindy)