From: Jose E. Marchesi Date: Thu, 4 Jun 2020 14:14:41 +0000 (+0200) Subject: opcodes: support insn endianness in cgen_cpu_open X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b3db6d07be467fe86f5b4185a8fc7bec49380c1f;p=binutils-gdb.git opcodes: support insn endianness in cgen_cpu_open This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument for @arch@_cgen_cpu_open. This is useful for architectures in which the endianness of the instruction words is not the same than the endianness used for data. An accompanying patch has been sent to the CGEN mailing list that adds support for this argument on the CGEN side [1]. Its been already pre-approved [2], and will be applied simultaneously with this binutils series. [1] https://sourceware.org/pipermail/cgen/2020q2/002733.html [2] https://sourceware.org/pipermail/cgen/2020q2/002737.html include/ChangeLog: 2020-06-04 Jose E. Marchesi * opcode/cgen.h (enum cgen_cpu_open_arg): New value CGEN_CPU_OPEN_INSN_ENDIAN. opcodes/ChangeLog: 2020-06-04 Jose E. Marchesi * cgen-dis.in (cpu_desc_list): New field `insn_endian'. (print_insn_): Handle instruction endian. * bpf-dis.c: Regenerate. * bpf-desc.c: Regenerate. * epiphany-dis.c: Likewise. * epiphany-desc.c: Likewise. * fr30-dis.c: Likewise. * fr30-desc.c: Likewise. * frv-dis.c: Likewise. * frv-desc.c: Likewise. * ip2k-dis.c: Likewise. * ip2k-desc.c: Likewise. * iq2000-dis.c: Likewise. * iq2000-desc.c: Likewise. * lm32-dis.c: Likewise. * lm32-desc.c: Likewise. * m32c-dis.c: Likewise. * m32c-desc.c: Likewise. * m32r-dis.c: Likewise. * m32r-desc.c: Likewise. * mep-dis.c: Likewise. * mep-desc.c: Likewise. * mt-dis.c: Likewise. * mt-desc.c: Likewise. * or1k-dis.c: Likewise. * or1k-desc.c: Likewise. * xc16x-dis.c: Likewise. * xc16x-desc.c: Likewise. * xstormy16-dis.c: Likewise. * xstormy16-desc.c: Likewise. binutils/ChangeLog: 2020-06-04 Jose E. Marchesi * objdump.c (disassemble_data): Set disasm_info.endian_code to disasm_info.endian after the latter is initialized to the endianness reported by BFD. --- diff --git a/binutils/ChangeLog b/binutils/ChangeLog index 706f283bd25..10806a93530 100644 --- a/binutils/ChangeLog +++ b/binutils/ChangeLog @@ -1,3 +1,9 @@ +2020-06-04 Jose E. Marchesi + + * objdump.c (disassemble_data): Set disasm_info.endian_code to + disasm_info.endian after the latter is initialized to the + endianness reported by BFD. + 2020-06-04 Alan Modra * testsuite/binutils-all/i386/i386.exp: Remove global directive diff --git a/binutils/objdump.c b/binutils/objdump.c index 99e6df6eb17..9b3d5b7acb8 100644 --- a/binutils/objdump.c +++ b/binutils/objdump.c @@ -3479,6 +3479,8 @@ disassemble_data (bfd *abfd) instead. */ disasm_info.endian = BFD_ENDIAN_UNKNOWN; + disasm_info.endian_code = disasm_info.endian; + /* Allow the target to customize the info structure. */ disassemble_init_for_target (& disasm_info); diff --git a/include/ChangeLog b/include/ChangeLog index 5c0a82b5f8e..df4208eda10 100644 --- a/include/ChangeLog +++ b/include/ChangeLog @@ -1,3 +1,8 @@ +2020-06-04 Jose E. Marchesi + + * opcode/cgen.h (enum cgen_cpu_open_arg): New value + CGEN_CPU_OPEN_INSN_ENDIAN. + 2020-06-03 Nelson Chu * opcode/riscv.h: Remove #include "bfd.h". And change the return diff --git a/include/opcode/cgen.h b/include/opcode/cgen.h index 95bbdf43e35..3f325447b9e 100644 --- a/include/opcode/cgen.h +++ b/include/opcode/cgen.h @@ -1392,7 +1392,9 @@ enum cgen_cpu_open_arg { Multiple machines can be specified by repeated use. */ CGEN_CPU_OPEN_BFDMACH, /* Select endian, arg is CGEN_ENDIAN_*. */ - CGEN_CPU_OPEN_ENDIAN + CGEN_CPU_OPEN_ENDIAN, + /* Select instruction endian, arg is CGEN_ENDIAN_*. */ + CGEN_CPU_OPEN_INSN_ENDIAN, }; /* Open a cpu descriptor table for use. @@ -1465,6 +1467,11 @@ extern CGEN_INSN_INT cgen_get_insn_value extern void cgen_put_insn_value (CGEN_CPU_DESC, unsigned char *, int, CGEN_INSN_INT); +extern CGEN_INSN_INT cgen_get_base_insn_value + (CGEN_CPU_DESC, unsigned char *, int); +extern void cgen_put_base_insn_value + (CGEN_CPU_DESC, unsigned char *, int, CGEN_INSN_INT); + /* Read in a cpu description file. ??? For future concerns, including adding instructions to the assembler/ disassembler at run-time. */ diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 62223fa1cb3..dc4c285eb06 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,3 +1,36 @@ +2020-06-04 Jose E. Marchesi + + * cgen-dis.in (cpu_desc_list): New field `insn_endian'. + (print_insn_): Handle instruction endian. + * bpf-dis.c: Regenerate. + * bpf-desc.c: Regenerate. + * epiphany-dis.c: Likewise. + * epiphany-desc.c: Likewise. + * fr30-dis.c: Likewise. + * fr30-desc.c: Likewise. + * frv-dis.c: Likewise. + * frv-desc.c: Likewise. + * ip2k-dis.c: Likewise. + * ip2k-desc.c: Likewise. + * iq2000-dis.c: Likewise. + * iq2000-desc.c: Likewise. + * lm32-dis.c: Likewise. + * lm32-desc.c: Likewise. + * m32c-dis.c: Likewise. + * m32c-desc.c: Likewise. + * m32r-dis.c: Likewise. + * m32r-desc.c: Likewise. + * mep-dis.c: Likewise. + * mep-desc.c: Likewise. + * mt-dis.c: Likewise. + * mt-desc.c: Likewise. + * or1k-dis.c: Likewise. + * or1k-desc.c: Likewise. + * xc16x-dis.c: Likewise. + * xc16x-desc.c: Likewise. + * xstormy16-dis.c: Likewise. + * xstormy16-desc.c: Likewise. + 2020-06-03 Nick Clifton * po/sr.po: Updated Serbian translation. diff --git a/opcodes/bpf-desc.c b/opcodes/bpf-desc.c index 33683a2f545..abd8c41006f 100644 --- a/opcodes/bpf-desc.c +++ b/opcodes/bpf-desc.c @@ -1701,6 +1701,7 @@ bpf_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1714,6 +1715,7 @@ bpf_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1748,6 +1750,9 @@ bpf_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1777,11 +1782,8 @@ bpf_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = bpf_cgen_rebuild_tables; diff --git a/opcodes/bpf-dis.c b/opcodes/bpf-dis.c index 60e0d960c87..21d9308be03 100644 --- a/opcodes/bpf-dis.c +++ b/opcodes/bpf-dis.c @@ -507,6 +507,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -519,12 +520,16 @@ print_insn_bpf (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -590,9 +595,11 @@ print_insn_bpf (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = bpf_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/cgen-dis.in b/opcodes/cgen-dis.in index 5f448fbd3ff..378b984551d 100644 --- a/opcodes/cgen-dis.in +++ b/opcodes/cgen-dis.in @@ -341,6 +341,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -353,12 +354,16 @@ print_insn_@arch@ (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -424,9 +429,11 @@ print_insn_@arch@ (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = @arch@_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/epiphany-desc.c b/opcodes/epiphany-desc.c index 3776ebba5b1..fbd1f8b9f6a 100644 --- a/opcodes/epiphany-desc.c +++ b/opcodes/epiphany-desc.c @@ -2139,6 +2139,7 @@ epiphany_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -2152,6 +2153,7 @@ epiphany_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -2186,6 +2188,9 @@ epiphany_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -2215,11 +2220,8 @@ epiphany_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = epiphany_cgen_rebuild_tables; diff --git a/opcodes/epiphany-dis.c b/opcodes/epiphany-dis.c index 1621d08e3e1..966b39fe099 100644 --- a/opcodes/epiphany-dis.c +++ b/opcodes/epiphany-dis.c @@ -582,6 +582,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -594,12 +595,16 @@ print_insn_epiphany (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -665,9 +670,11 @@ print_insn_epiphany (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = epiphany_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/fr30-desc.c b/opcodes/fr30-desc.c index 5fe16b781aa..836b1b9e4be 100644 --- a/opcodes/fr30-desc.c +++ b/opcodes/fr30-desc.c @@ -1616,6 +1616,7 @@ fr30_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1629,6 +1630,7 @@ fr30_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1663,6 +1665,9 @@ fr30_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1692,11 +1697,8 @@ fr30_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = fr30_cgen_rebuild_tables; diff --git a/opcodes/fr30-dis.c b/opcodes/fr30-dis.c index 331b5fb06e1..b98ea94a1a6 100644 --- a/opcodes/fr30-dis.c +++ b/opcodes/fr30-dis.c @@ -603,6 +603,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -615,12 +616,16 @@ print_insn_fr30 (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -686,9 +691,11 @@ print_insn_fr30 (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = fr30_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/frv-desc.c b/opcodes/frv-desc.c index 869237e674b..5c90bb42974 100644 --- a/opcodes/frv-desc.c +++ b/opcodes/frv-desc.c @@ -6356,6 +6356,7 @@ frv_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -6369,6 +6370,7 @@ frv_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -6403,6 +6405,9 @@ frv_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -6432,11 +6437,8 @@ frv_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = frv_cgen_rebuild_tables; diff --git a/opcodes/frv-dis.c b/opcodes/frv-dis.c index 6f3d6cc6fdb..60f1a6141ed 100644 --- a/opcodes/frv-dis.c +++ b/opcodes/frv-dis.c @@ -700,6 +700,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -712,12 +713,16 @@ print_insn_frv (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -783,9 +788,11 @@ print_insn_frv (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = frv_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/ip2k-desc.c b/opcodes/ip2k-desc.c index 9e5cf6ce23a..9e6b4e27ab2 100644 --- a/opcodes/ip2k-desc.c +++ b/opcodes/ip2k-desc.c @@ -1045,6 +1045,7 @@ ip2k_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1058,6 +1059,7 @@ ip2k_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1092,6 +1094,9 @@ ip2k_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1121,11 +1126,8 @@ ip2k_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = ip2k_cgen_rebuild_tables; diff --git a/opcodes/ip2k-dis.c b/opcodes/ip2k-dis.c index 5f79b804fe0..4a53a7c2463 100644 --- a/opcodes/ip2k-dis.c +++ b/opcodes/ip2k-dis.c @@ -592,6 +592,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -604,12 +605,16 @@ print_insn_ip2k (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -675,9 +680,11 @@ print_insn_ip2k (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = ip2k_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/iq2000-desc.c b/opcodes/iq2000-desc.c index b14842767e8..db5ce60f58a 100644 --- a/opcodes/iq2000-desc.c +++ b/opcodes/iq2000-desc.c @@ -2050,6 +2050,7 @@ iq2000_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -2063,6 +2064,7 @@ iq2000_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -2097,6 +2099,9 @@ iq2000_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -2126,11 +2131,8 @@ iq2000_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = iq2000_cgen_rebuild_tables; diff --git a/opcodes/iq2000-dis.c b/opcodes/iq2000-dis.c index 64f18aea2cf..3aab139c51f 100644 --- a/opcodes/iq2000-dis.c +++ b/opcodes/iq2000-dis.c @@ -493,6 +493,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -505,12 +506,16 @@ print_insn_iq2000 (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -576,9 +581,11 @@ print_insn_iq2000 (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = iq2000_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/lm32-desc.c b/opcodes/lm32-desc.c index 7470c3f9f1b..0270333a73d 100644 --- a/opcodes/lm32-desc.c +++ b/opcodes/lm32-desc.c @@ -1032,6 +1032,7 @@ lm32_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1045,6 +1046,7 @@ lm32_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1079,6 +1081,9 @@ lm32_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1108,11 +1113,8 @@ lm32_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = lm32_cgen_rebuild_tables; diff --git a/opcodes/lm32-dis.c b/opcodes/lm32-dis.c index 7c53c400b69..7ba84b3a66e 100644 --- a/opcodes/lm32-dis.c +++ b/opcodes/lm32-dis.c @@ -451,6 +451,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -463,12 +464,16 @@ print_insn_lm32 (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -534,9 +539,11 @@ print_insn_lm32 (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = lm32_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/m32c-desc.c b/opcodes/m32c-desc.c index d79d2f49df9..2dcccec3b60 100644 --- a/opcodes/m32c-desc.c +++ b/opcodes/m32c-desc.c @@ -63063,6 +63063,7 @@ m32c_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -63076,6 +63077,7 @@ m32c_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -63110,6 +63112,9 @@ m32c_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -63139,11 +63144,8 @@ m32c_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = m32c_cgen_rebuild_tables; diff --git a/opcodes/m32c-dis.c b/opcodes/m32c-dis.c index 9df688e943b..41afca3cc0a 100644 --- a/opcodes/m32c-dis.c +++ b/opcodes/m32c-dis.c @@ -1195,6 +1195,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -1207,12 +1208,16 @@ print_insn_m32c (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -1278,9 +1283,11 @@ print_insn_m32c (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = m32c_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/m32r-desc.c b/opcodes/m32r-desc.c index 142cea34080..bb96818c94c 100644 --- a/opcodes/m32r-desc.c +++ b/opcodes/m32r-desc.c @@ -1395,6 +1395,7 @@ m32r_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1408,6 +1409,7 @@ m32r_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1442,6 +1444,9 @@ m32r_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1471,11 +1476,8 @@ m32r_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = m32r_cgen_rebuild_tables; diff --git a/opcodes/m32r-dis.c b/opcodes/m32r-dis.c index 59402220f93..e6667398019 100644 --- a/opcodes/m32r-dis.c +++ b/opcodes/m32r-dis.c @@ -583,6 +583,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -595,12 +596,16 @@ print_insn_m32r (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -666,9 +671,11 @@ print_insn_m32r (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = m32r_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/mep-desc.c b/opcodes/mep-desc.c index 305f7447074..e255641f27e 100644 --- a/opcodes/mep-desc.c +++ b/opcodes/mep-desc.c @@ -6256,6 +6256,7 @@ mep_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -6269,6 +6270,7 @@ mep_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -6303,6 +6305,9 @@ mep_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -6332,11 +6337,8 @@ mep_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = mep_cgen_rebuild_tables; diff --git a/opcodes/mep-dis.c b/opcodes/mep-dis.c index 71da5a73abb..d2df5883031 100644 --- a/opcodes/mep-dis.c +++ b/opcodes/mep-dis.c @@ -1491,6 +1491,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -1503,12 +1504,16 @@ print_insn_mep (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -1574,9 +1579,11 @@ print_insn_mep (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = mep_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/mt-desc.c b/opcodes/mt-desc.c index ca1f50c4afb..37a02c9b8d5 100644 --- a/opcodes/mt-desc.c +++ b/opcodes/mt-desc.c @@ -1176,6 +1176,7 @@ mt_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1189,6 +1190,7 @@ mt_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1223,6 +1225,9 @@ mt_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1252,11 +1257,8 @@ mt_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = mt_cgen_rebuild_tables; diff --git a/opcodes/mt-dis.c b/opcodes/mt-dis.c index 2cbca8cbf78..3d552e8acbb 100644 --- a/opcodes/mt-dis.c +++ b/opcodes/mt-dis.c @@ -594,6 +594,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -606,12 +607,16 @@ print_insn_mt (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -677,9 +682,11 @@ print_insn_mt (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = mt_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/or1k-desc.c b/opcodes/or1k-desc.c index 8bf986d9e0e..a4f32d67b38 100644 --- a/opcodes/or1k-desc.c +++ b/opcodes/or1k-desc.c @@ -2070,6 +2070,7 @@ or1k_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -2083,6 +2084,7 @@ or1k_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -2117,6 +2119,9 @@ or1k_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -2146,11 +2151,8 @@ or1k_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = or1k_cgen_rebuild_tables; diff --git a/opcodes/or1k-dis.c b/opcodes/or1k-dis.c index dcb02c08ca5..d350d2bbae2 100644 --- a/opcodes/or1k-dis.c +++ b/opcodes/or1k-dis.c @@ -478,6 +478,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -490,12 +491,16 @@ print_insn_or1k (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -561,9 +566,11 @@ print_insn_or1k (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = or1k_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/xc16x-desc.c b/opcodes/xc16x-desc.c index 621f2eb7386..4532c1720e7 100644 --- a/opcodes/xc16x-desc.c +++ b/opcodes/xc16x-desc.c @@ -3379,6 +3379,7 @@ xc16x_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -3392,6 +3393,7 @@ xc16x_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -3426,6 +3428,9 @@ xc16x_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -3455,11 +3460,8 @@ xc16x_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = xc16x_cgen_rebuild_tables; diff --git a/opcodes/xc16x-dis.c b/opcodes/xc16x-dis.c index 84bc1e02eec..2cf926b68f8 100644 --- a/opcodes/xc16x-dis.c +++ b/opcodes/xc16x-dis.c @@ -724,6 +724,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -736,12 +737,16 @@ print_insn_xc16x (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -807,9 +812,11 @@ print_insn_xc16x (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = xc16x_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort (); diff --git a/opcodes/xstormy16-desc.c b/opcodes/xstormy16-desc.c index c1669c06e6a..a62d1f7eccd 100644 --- a/opcodes/xstormy16-desc.c +++ b/opcodes/xstormy16-desc.c @@ -1347,6 +1347,7 @@ xstormy16_cgen_rebuild_tables (CGEN_CPU_TABLE *cd) CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name CGEN_CPU_OPEN_ENDIAN: specify endian choice + CGEN_CPU_OPEN_INSN_ENDIAN: specify instruction endian choice CGEN_CPU_OPEN_END: terminates arguments ??? Simultaneous multiple isas might not make sense, but it's not (yet) @@ -1360,6 +1361,7 @@ xstormy16_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) CGEN_BITSET *isas = 0; /* 0 = "unspecified" */ unsigned int machs = 0; /* 0 = "unspecified" */ enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN; + enum cgen_endian insn_endian = CGEN_ENDIAN_UNKNOWN; va_list ap; if (! init_p) @@ -1394,6 +1396,9 @@ xstormy16_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) case CGEN_CPU_OPEN_ENDIAN : endian = va_arg (ap, enum cgen_endian); break; + case CGEN_CPU_OPEN_INSN_ENDIAN : + insn_endian = va_arg (ap, enum cgen_endian); + break; default : opcodes_error_handler (/* xgettext:c-format */ @@ -1423,11 +1428,8 @@ xstormy16_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...) cd->isas = cgen_bitset_copy (isas); cd->machs = machs; cd->endian = endian; - /* FIXME: for the sparc case we can determine insn-endianness statically. - The worry here is where both data and insn endian can be independently - chosen, in which case this function will need another argument. - Actually, will want to allow for more arguments in the future anyway. */ - cd->insn_endian = endian; + cd->insn_endian + = (insn_endian == CGEN_ENDIAN_UNKNOWN ? endian : insn_endian); /* Table (re)builder. */ cd->rebuild_tables = xstormy16_cgen_rebuild_tables; diff --git a/opcodes/xstormy16-dis.c b/opcodes/xstormy16-dis.c index 07e025fd3b9..8382c3da85d 100644 --- a/opcodes/xstormy16-dis.c +++ b/opcodes/xstormy16-dis.c @@ -472,6 +472,7 @@ typedef struct cpu_desc_list CGEN_BITSET *isa; int mach; int endian; + int insn_endian; CGEN_CPU_DESC cd; } cpu_desc_list; @@ -484,12 +485,16 @@ print_insn_xstormy16 (bfd_vma pc, disassemble_info *info) static CGEN_BITSET *prev_isa; static int prev_mach; static int prev_endian; + static int prev_insn_endian; int length; CGEN_BITSET *isa; int mach; int endian = (info->endian == BFD_ENDIAN_BIG ? CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE); + int insn_endian = (info->endian_code == BFD_ENDIAN_BIG + ? CGEN_ENDIAN_BIG + : CGEN_ENDIAN_LITTLE); enum bfd_architecture arch; /* ??? gdb will set mach but leave the architecture as "unknown" */ @@ -555,9 +560,11 @@ print_insn_xstormy16 (bfd_vma pc, disassemble_info *info) prev_isa = cgen_bitset_copy (isa); prev_mach = mach; prev_endian = endian; + prev_insn_endian = insn_endian; cd = xstormy16_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa, CGEN_CPU_OPEN_BFDMACH, mach_name, CGEN_CPU_OPEN_ENDIAN, prev_endian, + CGEN_CPU_OPEN_INSN_ENDIAN, prev_insn_endian, CGEN_CPU_OPEN_END); if (!cd) abort ();