From: Richard Stallman Date: Sat, 1 Feb 1992 08:24:22 +0000 (+0000) Subject: Initial revision X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b4ad7b237fc17f57e7e26bfcbf8b02f20411837a;p=gcc.git Initial revision From-SVN: r265 --- diff --git a/gcc/loop.c b/gcc/loop.c new file mode 100644 index 00000000000..44fad229942 --- /dev/null +++ b/gcc/loop.c @@ -0,0 +1,6255 @@ +/* Move constant computations out of loops. + Copyright (C) 1987, 1988, 1989, 1991 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + + +/* This is the loop optimization pass of the compiler. + It finds invariant computations within loops and moves them + to the beginning of the loop. Then it identifies basic and + general induction variables. Strength reduction is applied to the general + induction variables, and induction variable elimination is applied to + the basic induction variables. + + It also finds cases where + a register is set within the loop by zero-extending a narrower value + and changes these to zero the entire register once before the loop + and merely copy the low part within the loop. + + Most of the complexity is in heuristics to decide when it is worth + while to do these things. */ + +#include "config.h" +#include "rtl.h" +#include "obstack.h" +#include "expr.h" +#include "insn-config.h" +#include "insn-flags.h" +#include "regs.h" +#include "hard-reg-set.h" +#include "recog.h" +#include "flags.h" +#include "real.h" +#include +#include "loop.h" + +/* Vector mapping INSN_UIDs to luids. + The luids are like uids but increase monononically always. + We use them to see whether a jump comes from outside a given loop. */ + +int *uid_luid; + +/* Indexed by INSN_UID, contains the ordinal giving the (innermost) loop + number the insn is contained in. */ + +int *uid_loop_num; + +/* 1 + largest uid of any insn. */ + +int max_uid_for_loop; + +/* 1 + luid of last insn. */ + +static int max_luid; + +/* Number of loops detected in current function. Used as index to the + next few tables. */ + +static int max_loop_num; + +/* Indexed by loop number, contains the first and last insn of each loop. */ + +static rtx *loop_number_loop_starts, *loop_number_loop_ends; + +/* For each loop, gives the containing loop number, -1 if none. */ + +int *loop_outer_loop; + +/* Indexed by loop number, contains a nonzero value if the "loop" isn't + really a loop (an insn outside the loop branches into it). */ + +static char *loop_invalid; + +/* Indexed by loop number, links together all LABEL_REFs which refer to + code labels outside the loop. Used by routines that need to know all + loop exits, such as final_biv_value and final_giv_value. + + This does not include loop exits due to return instructions. This is + because all bivs and givs are pseudos, and hence must be dead after a + return, so the presense of a return does not affect any of the + optimizations that use this info. It is simpler to just not include return + instructions on this list. */ + +rtx *loop_number_exit_labels; + +/* Holds the number of loop iterations. It is zero if the number could not be + calculated. Must be unsigned long since the number of iterations can + be as high as 2^31-1. For loops with a DImode iterator, this number will + will be zero if the number of loop iterations is too large for an + unsigned long to hold. */ + +unsigned long loop_n_iterations; + +/* Nonzero if there is a subroutine call in the current loop. + (unknown_address_altered is also nonzero in this case.) */ + +static int loop_has_call; + +/* Added loop_continue which is the NOTE_INSN_LOOP_CONT of the + current loop. A continue statement will generate a branch to + NEXT_INSN (loop_continue). */ + +static rtx loop_continue; + +/* Indexed by register number, contains the number of times the reg + is set during the loop being scanned. + During code motion, a negative value indicates a reg that has been + made a candidate; in particular -2 means that it is an candidate that + we know is equal to a constant and -1 means that it is an condidate + not known equal to a constant. + After code motion, regs moved have 0 (which is accurate now) + while the failed candidates have the original number of times set. + + Therefore, at all times, == 0 indicates an invariant register; + < 0 a conditionally invariant one. */ + +static short *n_times_set; + +/* Original value of n_times_set; same except that this value + is not set negative for a reg whose sets have been made candidates + and not set to 0 for a reg that is moved. */ + +static short *n_times_used; + +/* Index by register number, 1 indicates that the register + cannot be moved or strength reduced. */ + +static char *may_not_optimize; + +/* Nonzero means reg N has already been moved out of one loop. + This reduces the desire to move it out of another. */ + +static char *moved_once; + +/* Array of MEMs that are stored in this loop. If there are too many to fit + here, we just turn on unknown_address_altered. */ + +#define NUM_STORES 20 +static rtx loop_store_mems[NUM_STORES]; + +/* Index of first available slot in above array. */ +static int loop_store_mems_idx; + +/* Nonzero if we don't know what MEMs were changed in the current loop. + This happens if the loop contains a call (in which call `loop_has_call' + will also be set) or if we store into more than NUM_STORES MEMs. */ + +static int unknown_address_altered; + +/* Count of movable (i.e. invariant) instructions discovered in the loop. */ +static int num_movables; + +/* Count of memory write instructions discovered in the loop. */ +static int num_mem_sets; + +/* Number of loops contained within the current one, including itself. */ +static int loops_enclosed; + +/* Bound on pseudo register number before loop optimization. + A pseudo has valid regscan info if its number is < max_reg_before_loop. */ +int max_reg_before_loop; + +/* This obstack is used in product_cheap_p to allocate its rtl. It + may call gen_reg_rtx which, in turn, may reallocate regno_reg_rtx. + If we used the same obstack that it did, we would be deallocating + that array. */ + +static struct obstack temp_obstack; + +/* This is where the pointer to the obstack being used for RTL is stored. */ + +extern struct obstack *rtl_obstack; + +#define obstack_chunk_alloc xmalloc +#define obstack_chunk_free free + +extern char *oballoc (); +extern int xmalloc (); +extern void free (); + +/* During the analysis of a loop, a chain of `struct movable's + is made to record all the movable insns found. + Then the entire chain can be scanned to decide which to move. */ + +struct movable +{ + rtx insn; /* A movable insn */ + rtx set_src; /* The expression this reg is set from. */ + rtx set_dest; /* The destination of this SET. */ + rtx dependencies; /* When INSN is libcall, this is an EXPR_LIST + of any registers used within the LIBCALL. */ + int consec; /* Number of consecutive following insns + that must be moved with this one. */ + int regno; /* The register it sets */ + short lifetime; /* lifetime of that register; + may be adjusted when matching movables + that load the same value are found. */ + short savings; /* Number of insns we can move for this reg, + including other movables that force this + or match this one. */ + unsigned int cond : 1; /* 1 if only conditionally movable */ + unsigned int force : 1; /* 1 means MUST move this insn */ + unsigned int global : 1; /* 1 means reg is live outside this loop */ + /* If PARTIAL is 1, GLOBAL means something different: + that the reg is live outside the range from where it is set + to the following label. */ + unsigned int done : 1; /* 1 inhibits further processing of this */ + + unsigned int partial : 1; /* 1 means this reg is used for zero-extending. + In particular, moving it does not make it + invariant. */ + unsigned int move_insn : 1; /* 1 means that we call emit_move_insn to + load SRC, rather than copying INSN. */ + unsigned int is_equiv : 1; /* 1 means a REG_EQUIV is present on INSN. */ + enum machine_mode savemode; /* Nonzero means it is a mode for a low part + that we should avoid changing when clearing + the rest of the reg. */ + struct movable *match; /* First entry for same value */ + struct movable *forces; /* An insn that must be moved if this is */ + struct movable *next; +}; + +FILE *loop_dump_stream; + +/* Forward declarations. */ + +static void find_and_verify_loops (); +static void mark_loop_jump (); +static void prescan_loop (); +static int reg_in_basic_block_p (); +static int consec_sets_invariant_p (); +static rtx libcall_other_reg (); +static int labels_in_range_p (); +static void count_loop_regs_set (); +static void note_addr_stored (); +static int loop_reg_used_before_p (); +static void scan_loop (); +static void replace_call_address (); +static rtx skip_consec_insns (); +static int libcall_benefit (); +static void ignore_some_movables (); +static void force_movables (); +static void combine_movables (); +static int rtx_equal_for_loop_p (); +static void move_movables (); +static void strength_reduce (); +static int valid_initial_value_p (); +static void find_mem_givs (); +static void record_biv (); +static void check_final_value (); +static void record_giv (); +static void update_giv_derive (); +static void delete_insn_forces (); +static int basic_induction_var (); +static rtx simplify_giv_expr (); +static int general_induction_var (); +static int consec_sets_giv (); +static int check_dbra_loop (); +static rtx express_from (); +static int combine_givs_p (); +static void combine_givs (); +static int product_cheap_p (); +static int maybe_eliminate_biv (); +static int maybe_eliminate_biv_1 (); +static int last_use_this_basic_block (); +static void record_initial (); +static void update_reg_last_use (); + +/* Relative gain of eliminating various kinds of operations. */ +int add_cost; +#if 0 +int shift_cost; +int mult_cost; +#endif + +/* Benefit penalty, if a giv is not replaceable, i.e. must emit an insn to + copy the value of the strength reduced giv to its original register. */ +int copy_cost; + +void +init_loop () +{ + char *free_point = (char *) oballoc (1); + rtx reg = gen_rtx (REG, SImode, 0); + rtx pow2 = gen_rtx (CONST_INT, VOIDmode, 32); + rtx lea; + int i; + + add_cost = rtx_cost (gen_rtx (PLUS, SImode, reg, reg)); + + /* We multiply by 2 to reconcile the difference in scale between + these two ways of computing costs. Otherwise the cost of a copy + will be far less than the cost of an add. */ +#ifdef REGISTER_MOVE_COST + copy_cost = REGISTER_MOVE_COST (GENERAL_REGS, GENERAL_REGS) * 2; +#else + copy_cost = 2 * 2; +#endif + + /* Free the objects we just allocated. */ + obfree (free_point); + + /* Initialize the obstack used for rtl in product_cheap_p. */ + gcc_obstack_init (&temp_obstack); +} + +/* Entry point of this file. Perform loop optimization + on the current function. F is the first insn of the function + and DUMPFILE is a stream for output of a trace of actions taken + (or 0 if none should be output). */ + +void +loop_optimize (f, dumpfile) + /* f is the first instruction of a chain of insns for one function */ + rtx f; + FILE *dumpfile; +{ + register rtx insn; + register int i; + rtx end; + rtx last_insn; + + loop_dump_stream = dumpfile; + + init_recog_no_volatile (); + init_alias_analysis (); + + max_reg_before_loop = max_reg_num (); + + moved_once = (char *) alloca (max_reg_before_loop); + bzero (moved_once, max_reg_before_loop); + + regs_may_share = 0; + + /* Count the number of loops. */ + + max_loop_num = 0; + for (insn = f; insn; insn = NEXT_INSN (insn)) + { + if (GET_CODE (insn) == NOTE + && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) + max_loop_num++; + } + + /* Don't waste time if no loops. */ + if (max_loop_num == 0) + return; + + /* Get size to use for tables indexed by uids. + Leave some space for labels allocated by find_and_verify_loops. */ + max_uid_for_loop = get_max_uid () + 1 + max_loop_num * 4; + + uid_luid = (int *) alloca (max_uid_for_loop * sizeof (int)); + uid_loop_num = (int *) alloca (max_uid_for_loop * sizeof (int)); + + bzero (uid_luid, max_uid_for_loop * sizeof (int)); + bzero (uid_loop_num, max_uid_for_loop * sizeof (int)); + + /* Allocate tables for recording each loop. We set each entry, so they need + not be zeroed. */ + loop_number_loop_starts = (rtx *) alloca (max_loop_num * sizeof (rtx)); + loop_number_loop_ends = (rtx *) alloca (max_loop_num * sizeof (rtx)); + loop_outer_loop = (int *) alloca (max_loop_num * sizeof (int)); + loop_invalid = (char *) alloca (max_loop_num * sizeof (char)); + loop_number_exit_labels = (rtx *) alloca (max_loop_num * sizeof (rtx)); + + if (flag_unroll_loops && write_symbols != NO_DEBUG) + { + loop_number_first_block + = (union tree_node **) alloca (max_loop_num + * sizeof (union tree_node *)); + loop_number_last_block + = (union tree_node **) alloca (max_loop_num + * sizeof (union tree_node *)); + loop_number_block_level = (int *) alloca (max_loop_num * sizeof (int)); + } + + /* Find and process each loop. + First, find them, and record them in order of their beginnings. */ + find_and_verify_loops (f); + + /* Now find all register lifetimes. This must be done after + find_and_verify_loops, because it might reorder the insns in the + function. */ + reg_scan (f, max_reg_num (), 1); + + /* Compute the mapping from uids to luids. + LUIDs are numbers assigned to insns, like uids, + except that luids increase monotonically through the code. + Don't assign luids to line-number NOTEs, so that the distance in luids + between two insns is not affected by -g. */ + + for (insn = f, i = 0; insn; insn = NEXT_INSN (insn)) + { + last_insn = insn; + if (GET_CODE (insn) != NOTE + || NOTE_LINE_NUMBER (insn) <= 0) + uid_luid[INSN_UID (insn)] = ++i; + else + /* Give a line number note the same luid as preceding insn. */ + uid_luid[INSN_UID (insn)] = i; + } + + max_luid = i + 1; + + /* Don't leave gaps in uid_luid for insns that have been + deleted. It is possible that the first or last insn + using some register has been deleted by cross-jumping. + Make sure that uid_luid for that former insn's uid + points to the general area where that insn used to be. */ + for (i = 0; i < max_uid_for_loop; i++) + { + uid_luid[0] = uid_luid[i]; + if (uid_luid[0] != 0) + break; + } + for (i = 0; i < max_uid_for_loop; i++) + if (uid_luid[i] == 0) + uid_luid[i] = uid_luid[i - 1]; + + /* Create a mapping from loops to BLOCK tree nodes. */ + if (flag_unroll_loops && write_symbols != NO_DEBUG) + find_loop_tree_blocks (f); + + /* Now scan the loops, last ones first, since this means inner ones are done + before outer ones. */ + for (i = max_loop_num-1; i >= 0; i--) + if (! loop_invalid[i] && loop_number_loop_ends[i]) + scan_loop (loop_number_loop_starts[i], loop_number_loop_ends[i], + max_reg_num ()); +} + +/* Optimize one loop whose start is LOOP_START and end is END. + LOOP_START is the NOTE_INSN_LOOP_BEG and END is the matching + NOTE_INSN_LOOP_END. */ + +/* ??? Could also move memory writes out of loops if the destination address + is invariant, the source is invariant, the memory write is not volatile, + and if we can prove that no read inside the loop can read this address + before the write occurs. If there is a read of this address after the + write, then we can also mark the memory read as invariant. */ + +static void +scan_loop (loop_start, end, nregs) + rtx loop_start, end; + int nregs; +{ + register int i; + register rtx p; + /* 1 if we are scanning insns that could be executed zero times. */ + int maybe_never = 0; + /* 1 if we are scanning insns that might never be executed + due to a subroutine call which might exit before they are reached. */ + int call_passed = 0; + /* For a rotated loop that is entered near the bottom, + this is the label at the top. Otherwise it is zero. */ + rtx loop_top = 0; + /* Jump insn that enters the loop, or 0 if control drops in. */ + rtx loop_entry_jump = 0; + /* Place in the loop where control enters. */ + rtx scan_start; + /* Number of insns in the loop. */ + int insn_count; + int in_libcall = 0; + int tem; + rtx temp; + /* The SET from an insn, if it is the only SET in the insn. */ + rtx set, set1; + /* Chain describing insns movable in current loop. */ + struct movable *movables = 0; + /* Last element in `movables' -- so we can add elements at the end. */ + struct movable *last_movable = 0; + /* Ratio of extra register life span we can justify + for saving an instruction. More if loop doesn't call subroutines + since in that case saving an insn makes more difference + and more registers are available. */ + int threshold; + /* If we have calls, contains the insn in which a register was used + if it was used exactly once; contains const0_rtx if it was used more + than once. */ + rtx *reg_single_usage = 0; + + n_times_set = (short *) alloca (nregs * sizeof (short)); + n_times_used = (short *) alloca (nregs * sizeof (short)); + may_not_optimize = (char *) alloca (nregs); + + /* Determine whether this loop starts with a jump down to a test at + the end. This will occur for a small number of loops with a test + that is too complex to duplicate in front of the loop. + + We search for the first insn or label in the loop, skipping NOTEs. + However, we must be careful not to skip past a NOTE_INSN_LOOP_BEG + (because we might have a loop executed only once that contains a + loop which starts with a jump to its exit test) or a NOTE_INSN_LOOP_END + (in case we have a degenerate loop). + + Note that if we mistakenly think that a loop is entered at the top + when, in fact, it is entered at the exit test, the only effect will be + slightly poorer optimization. Making the opposite error can generate + incorrect code. Since very few loops now start with a jump to the + exit test, the code here to detect that case is very conservative. */ + + for (p = NEXT_INSN (loop_start); + p != end + && GET_CODE (p) != CODE_LABEL && GET_RTX_CLASS (GET_CODE (p)) != 'i' + && (GET_CODE (p) != NOTE + || (NOTE_LINE_NUMBER (p) != NOTE_INSN_LOOP_BEG + && NOTE_LINE_NUMBER (p) != NOTE_INSN_LOOP_END)); + p = NEXT_INSN (p)) + ; + + scan_start = p; + + /* Set up variables describing this loop. */ + prescan_loop (loop_start, end); + threshold = (loop_has_call ? 1 : 2) * (1 + n_non_fixed_regs); + + /* If loop has a jump before the first label, + the true entry is the target of that jump. + Start scan from there. + But record in LOOP_TOP the place where the end-test jumps + back to so we can scan that after the end of the loop. */ + if (GET_CODE (p) == JUMP_INSN) + { + loop_entry_jump = p; + + /* Loop entry must be unconditional jump (and not a RETURN) */ + if (simplejump_p (p) + && JUMP_LABEL (p) != 0 + /* Check to see whether the jump actually + jumps out of the loop (meaning it's no loop). + This case can happen for things like + do {..} while (0). If this label was generated previously + by loop, we can't tell anything about it and have to reject + the loop. */ + && INSN_UID (JUMP_LABEL (p)) < max_uid_for_loop + && INSN_LUID (JUMP_LABEL (p)) >= INSN_LUID (loop_start) + && INSN_LUID (JUMP_LABEL (p)) < INSN_LUID (end)) + { + loop_top = next_label (scan_start); + scan_start = JUMP_LABEL (p); + } + } + + /* If SCAN_START was an insn created by loop, we don't know its luid + as required by loop_reg_used_before_p. So skip such loops. (This + test may never be true, but it's best to play it safe.) + + Also, skip loops where we do not start scanning at a label. This + test also rejects loops starting with a JUMP_INSN that failed the + test above. */ + + if (INSN_UID (scan_start) >= max_uid_for_loop + || GET_CODE (scan_start) != CODE_LABEL) + { + if (loop_dump_stream) + fprintf (loop_dump_stream, "\nLoop from %d to %d is phony.\n\n", + INSN_UID (loop_start), INSN_UID (end)); + return; + } + + /* Count number of times each reg is set during this loop. + Set may_not_optimize[I] if it is not safe to move out + the setting of register I. If this loop has calls, set + reg_single_usage[I]. */ + + bzero (n_times_set, nregs * sizeof (short)); + bzero (may_not_optimize, nregs); + + if (loop_has_call) + { + reg_single_usage = (rtx *) alloca (nregs * sizeof (rtx)); + bzero (reg_single_usage, nregs * sizeof (rtx)); + } + + count_loop_regs_set (loop_top ? loop_top : loop_start, end, + may_not_optimize, reg_single_usage, &insn_count, nregs); + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + may_not_optimize[i] = 1, n_times_set[i] = 1; + bcopy (n_times_set, n_times_used, nregs * sizeof (short)); + + if (loop_dump_stream) + { + fprintf (loop_dump_stream, "\nLoop from %d to %d: %d real insns.\n", + INSN_UID (loop_start), INSN_UID (end), insn_count); + if (loop_continue) + fprintf (loop_dump_stream, "Continue at insn %d.\n", + INSN_UID (loop_continue)); + } + + /* Scan through the loop finding insns that are safe to move. + In each such insn, store QImode as the mode, to mark it. + Then set n_times_set negative for the reg being set, so that + this reg will be considered invariant for subsequent insns. + We consider whether subsequent insns use the reg + in deciding whether it is worth actually moving. + + MAYBE_NEVER is nonzero if we have passed a conditional jump insn + and therefore it is possible that the insns we are scanning + would never be executed. At such times, we must make sure + that it is safe to execute the insn once instead of zero times. + When MAYBE_NEVER is 0, all insns will be executed at least once + so that is not a problem. */ + + p = scan_start; + while (1) + { + p = NEXT_INSN (p); + /* At end of a straight-in loop, we are done. + At end of a loop entered at the bottom, scan the top. */ + if (p == scan_start) + break; + if (p == end) + { + if (loop_top != 0) + p = NEXT_INSN (loop_top); + else + break; + if (p == scan_start) + break; + } + + if (GET_RTX_CLASS (GET_CODE (p)) == 'i' + && find_reg_note (p, REG_LIBCALL, 0)) + in_libcall = 1; + else if (GET_RTX_CLASS (GET_CODE (p)) == 'i' + && find_reg_note (p, REG_RETVAL, 0)) + in_libcall = 0; + + if (GET_CODE (p) == INSN + && (set = single_set (p)) + && GET_CODE (SET_DEST (set)) == REG + && ! may_not_optimize[REGNO (SET_DEST (set))]) + { + int tem1 = 0; + int tem2 = 0; + int move_insn = 0; + rtx src = SET_SRC (set); + rtx dependencies = 0; + + /* Figure out what to use as a source of this insn. If a REG_EQUIV + note is given or if a REG_EQUAL note with a constant operand is + specified, use it as the source and mark that we should move + this insn by calling emit_move_insn rather that duplicating the + insn. + + Otherwise, only use the REG_EQUAL contents if a REG_RETVAL note + is present. */ + temp = find_reg_note (p, REG_EQUIV, 0); + if (temp) + src = XEXP (temp, 0), move_insn = 1; + else + { + temp = find_reg_note (p, REG_EQUAL, 0); + if (temp && CONSTANT_P (XEXP (temp, 0))) + src = XEXP (temp, 0), move_insn = 1; + if (temp && find_reg_note (p, REG_RETVAL, 0)) + { + src = XEXP (temp, 0); + /* A libcall block can use regs that don't appear in + the equivalent expression. To move the libcall, + we must move those regs too. */ + dependencies = libcall_other_reg (p, src); + } + } + + /* Don't try to optimize a register that was made + by loop-optimization for an inner loop. + We don't know its life-span, so we can't compute the benefit. */ + if (REGNO (SET_DEST (set)) >= max_reg_before_loop) + ; + /* In order to move a register, we need to have one of three cases: + (1) it is used only in the same basic block as the set + (2) it is not a user variable. + (3) the set is guaranteed to be executed once the loop starts, + and the reg is not used until after that. */ + else if (! ((! maybe_never + && ! loop_reg_used_before_p (set, p, loop_start, + scan_start, end)) + || ! REG_USERVAR_P (SET_DEST (PATTERN (p))) + || reg_in_basic_block_p (p, SET_DEST (PATTERN (p))))) + ; + else if ((tem = invariant_p (src)) + && (dependencies == 0 + || (tem2 = invariant_p (dependencies)) != 0) + && (n_times_set[REGNO (SET_DEST (set))] == 1 + || (tem1 + = consec_sets_invariant_p (SET_DEST (set), + n_times_set[REGNO (SET_DEST (set))], + p))) + /* If the insn can cause a trap (such as divide by zero), + can't move it unless it's guaranteed to be executed + once loop is entered. Even a function call might + prevent the trap insn from being reached + (since it might exit!) */ + && ! ((maybe_never || call_passed) + && may_trap_p (src))) + { + register struct movable *m; + register int regno = REGNO (SET_DEST (set)); + + /* A potential lossage is where we have a case where two insns + can be combined as long as they are both in the loop, but + we move one of them outside the loop. For large loops, + this can lose. The most common case of this is the address + of a function being called. + + Therefore, if this register is marked as being used exactly + once if we are in a loop with calls (a "large loop"), see if + we can replace the usage of this register with the source + of this SET. If we can, delete this insn. + + Don't do this if P has a REG_RETVAL note or if we have + SMALL_REGISTER_CLASSES and SET_SRC is a hard register. */ + + if (reg_single_usage && reg_single_usage[regno] != 0 + && reg_single_usage[regno] != const0_rtx + && regno_first_uid[regno] == INSN_UID (p) + && (regno_last_uid[regno] + == INSN_UID (reg_single_usage[regno])) + && n_times_set[REGNO (SET_DEST (set))] == 1 + && ! side_effects_p (SET_SRC (set)) + && ! find_reg_note (p, REG_RETVAL, 0) +#ifdef SMALL_REGISTER_CLASSES + && ! (GET_CODE (SET_SRC (set)) == REG + && REGNO (SET_SRC (set)) < FIRST_PSEUDO_REGISTER) +#endif + /* This test is not redundant; SET_SRC (set) might be + a call-clobbered register and the life of REGNO + might span a call. */ + && ! modified_between_p (SET_SRC (set), p, + reg_single_usage[regno]) + && validate_replace_rtx (SET_DEST (set), SET_SRC (set), + reg_single_usage[regno])) + { + /* Replace any usage in a REG_EQUAL note. */ + REG_NOTES (reg_single_usage[regno]) + = replace_rtx (REG_NOTES (reg_single_usage[regno]), + SET_DEST (set), SET_SRC (set)); + + PUT_CODE (p, NOTE); + NOTE_LINE_NUMBER (p) = NOTE_INSN_DELETED; + NOTE_SOURCE_FILE (p) = 0; + n_times_set[regno] = 0; + continue; + } + + m = (struct movable *) alloca (sizeof (struct movable)); + m->next = 0; + m->insn = p; + m->set_src = src; + m->dependencies = dependencies; + m->set_dest = SET_DEST (set); + m->force = 0; + m->consec = n_times_set[REGNO (SET_DEST (set))] - 1; + m->done = 0; + m->forces = 0; + m->partial = 0; + m->move_insn = move_insn; + m->is_equiv = (find_reg_note (p, REG_EQUIV, 0) != 0); + m->savemode = VOIDmode; + m->regno = regno; + /* Set M->cond if either invariant_p or consec_sets_invariant_p + returned 2 (only conditionally invariant). */ + m->cond = ((tem | tem1 | tem2) > 1); + m->global = (uid_luid[regno_last_uid[regno]] > INSN_LUID (end) + || uid_luid[regno_first_uid[regno]] < INSN_LUID (loop_start)); + m->match = 0; + m->lifetime = (uid_luid[regno_last_uid[regno]] + - uid_luid[regno_first_uid[regno]]); + m->savings = n_times_used[regno]; + if (find_reg_note (p, REG_RETVAL, 0)) + m->savings += libcall_benefit (p); + n_times_set[regno] = move_insn ? -2 : -1; + /* Add M to the end of the chain MOVABLES. */ + if (movables == 0) + movables = m; + else + last_movable->next = m; + last_movable = m; + + if (m->consec > 0) + { + /* Skip this insn, not checking REG_LIBCALL notes. */ + p = NEXT_INSN (p); + /* Skip the consecutive insns, if there are any. */ + p = skip_consec_insns (p, m->consec); + /* Back up to the last insn of the consecutive group. */ + p = prev_nonnote_insn (p); + + /* We must now reset m->move_insn, m->is_equiv, and possibly + m->set_src to correspond to the effects of all the + insns. */ + temp = find_reg_note (p, REG_EQUIV, 0); + if (temp) + m->set_src = XEXP (temp, 0), m->move_insn = 1; + else + { + temp = find_reg_note (p, REG_EQUAL, 0); + if (temp && CONSTANT_P (XEXP (temp, 0))) + m->set_src = XEXP (temp, 0), m->move_insn = 1; + else + m->move_insn = 0; + + } + m->is_equiv = (find_reg_note (p, REG_EQUIV, 0) != 0); + } + } + /* If this register is always set within a STRICT_LOW_PART + or set to zero, then its high bytes are constant. + So clear them outside the loop and within the loop + just load the low bytes. + We must check that the machine has an instruction to do so. + Also, if the value loaded into the register + depends on the same register, this cannot be done. */ + else if (SET_SRC (set) == const0_rtx + && GET_CODE (NEXT_INSN (p)) == INSN + && (set1 = single_set (NEXT_INSN (p))) + && GET_CODE (set1) == SET + && (GET_CODE (SET_DEST (set1)) == STRICT_LOW_PART) + && (GET_CODE (XEXP (SET_DEST (set1), 0)) == SUBREG) + && (SUBREG_REG (XEXP (SET_DEST (set1), 0)) + == SET_DEST (set)) + && !reg_mentioned_p (SET_DEST (set), SET_SRC (set1))) + { + register int regno = REGNO (SET_DEST (set)); + if (n_times_set[regno] == 2) + { + register struct movable *m; + m = (struct movable *) alloca (sizeof (struct movable)); + m->next = 0; + m->insn = p; + m->set_dest = SET_DEST (set); + m->dependencies = 0; + m->force = 0; + m->consec = 0; + m->done = 0; + m->forces = 0; + m->move_insn = 0; + m->partial = 1; + /* If the insn may not be executed on some cycles, + we can't clear the whole reg; clear just high part. + Not even if the reg is used only within this loop. + Consider this: + while (1) + while (s != t) { + if (foo ()) x = *s; + use (x); + } + Clearing x before the inner loop could clobber a value + being saved from the last time around the outer loop. + However, if the reg is not used outside this loop + and all uses of the register are in the same + basic block as the store, there is no problem. + + If this insn was made by loop, we don't know its + INSN_LUID and hence must make a conservative + assumption. */ + m->global = (INSN_UID (p) >= max_uid_for_loop + || (uid_luid[regno_last_uid[regno]] + > INSN_LUID (end)) + || (uid_luid[regno_first_uid[regno]] + < INSN_LUID (p)) + || (labels_in_range_p + (p, uid_luid[regno_first_uid[regno]]))); + if (maybe_never && m->global) + m->savemode = GET_MODE (SET_SRC (set1)); + else + m->savemode = VOIDmode; + m->regno = regno; + m->cond = 0; + m->match = 0; + m->lifetime = (uid_luid[regno_last_uid[regno]] + - uid_luid[regno_first_uid[regno]]); + m->savings = 1; + n_times_set[regno] = -1; + /* Add M to the end of the chain MOVABLES. */ + if (movables == 0) + movables = m; + else + last_movable->next = m; + last_movable = m; + } + } + } + /* Past a call insn, we get to insns which might not be executed + because the call might exit. This matters for insns that trap. + Call insns inside a REG_LIBCALL/REG_RETVAL block always return, + so they don't count. */ + else if (GET_CODE (p) == CALL_INSN && ! in_libcall) + call_passed = 1; + /* Past a label or a jump, we get to insns for which we + can't count on whether or how many times they will be + executed during each iteration. Therefore, we can + only move out sets of trivial variables + (those not used after the loop). */ + /* This code appears in three places, once in scan_loop, and twice + in strength_reduce. */ + else if ((GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN) + /* If we enter the loop in the middle, and scan around to the + beginning, don't set maybe_never for that. This must be an + unconditional jump, otherwise the code at the top of the + loop might never be executed. Unconditional jumps are + followed a by barrier then loop end. */ + && ! (GET_CODE (p) == JUMP_INSN && JUMP_LABEL (p) == loop_top + && NEXT_INSN (NEXT_INSN (p)) == end + && simplejump_p (p))) + maybe_never = 1; + /* At the virtual top of a converted loop, insns are again known to + be executed: logically, the loop begins here even though the exit + code has been duplicated. */ + else if (GET_CODE (p) == NOTE + && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_VTOP) + maybe_never = call_passed = 0; + } + + /* If one movable subsumes another, ignore that other. */ + + ignore_some_movables (movables); + + /* For each movable insn, see if the reg that it loads + leads when it dies right into another conditionally movable insn. + If so, record that the second insn "forces" the first one, + since the second can be moved only if the first is. */ + + force_movables (movables); + + /* See if there are multiple movable insns that load the same value. + If there are, make all but the first point at the first one + through the `match' field, and add the priorities of them + all together as the priority of the first. */ + + combine_movables (movables, nregs); + + /* Now consider each movable insn to decide whether it is worth moving. + Store 0 in n_times_set for each reg that is moved. */ + + move_movables (movables, threshold, + insn_count, loop_start, end, nregs); + + /* Now candidates that still are negative are those not moved. + Change n_times_set to indicate that those are not actually invariant. */ + for (i = 0; i < nregs; i++) + if (n_times_set[i] < 0) + n_times_set[i] = n_times_used[i]; + + if (flag_strength_reduce) + strength_reduce (scan_start, end, loop_top, + insn_count, loop_start, end); +} + +/* Add elements to *OUTPUT to record all the pseudo-regs + mentioned in IN_THIS but not mentioned in NOT_IN_THIS. */ + +void +record_excess_regs (in_this, not_in_this, output) + rtx in_this, not_in_this; + rtx *output; +{ + enum rtx_code code; + char *fmt; + int i; + + code = GET_CODE (in_this); + + switch (code) + { + case PC: + case CC0: + case CONST_INT: + case CONST_DOUBLE: + case CONST: + case SYMBOL_REF: + case LABEL_REF: + return; + + case REG: + if (REGNO (in_this) >= FIRST_PSEUDO_REGISTER + && ! reg_mentioned_p (in_this, not_in_this)) + *output = gen_rtx (EXPR_LIST, VOIDmode, in_this, *output); + return; + } + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + int j; + + switch (fmt[i]) + { + case 'E': + for (j = 0; j < XVECLEN (in_this, i); j++) + record_excess_regs (XVECEXP (in_this, i, j), not_in_this, output); + break; + + case 'e': + record_excess_regs (XEXP (in_this, i), not_in_this, output); + break; + } + } +} + +/* Check what regs are referred to in the libcall block ending with INSN, + aside from those mentioned in the equivalent value. + If there are none, return 0. + If there are one or more, return an EXPR_LIST containing all of them. */ + +static rtx +libcall_other_reg (insn, equiv) + rtx insn, equiv; +{ + rtx note = find_reg_note (insn, REG_RETVAL, 0); + rtx p = XEXP (note, 0); + rtx output = 0; + + /* First, find all the regs used in the libcall block + that are not mentioned as inputs to the result. */ + + while (p != insn) + { + if (GET_CODE (p) == INSN || GET_CODE (p) == JUMP_INSN + || GET_CODE (p) == CALL_INSN) + record_excess_regs (PATTERN (p), equiv, &output); + p = NEXT_INSN (p); + } + + return output; +} + +/* Return 1 if all uses of REG + are between INSN and the end of the basic block. */ + +static int +reg_in_basic_block_p (insn, reg) + rtx insn, reg; +{ + int regno = REGNO (reg); + rtx p; + + if (regno_first_uid[regno] != INSN_UID (insn)) + return 0; + + /* Search this basic block for the already recorded last use of the reg. */ + for (p = insn; p; p = NEXT_INSN (p)) + { + switch (GET_CODE (p)) + { + case NOTE: + break; + + case INSN: + case CALL_INSN: + /* Ordinary insn: if this is the last use, we win. */ + if (regno_last_uid[regno] == INSN_UID (p)) + return 1; + break; + + case JUMP_INSN: + /* Jump insn: if this is the last use, we win. */ + if (regno_last_uid[regno] == INSN_UID (p)) + return 1; + /* Otherwise, it's the end of the basic block, so we lose. */ + return 0; + + case CODE_LABEL: + case BARRIER: + /* It's the end of the basic block, so we lose. */ + return 0; + } + } + + /* The "last use" doesn't follow the "first use"?? */ + abort (); +} + +/* Compute the benefit of eliminating the insns in the block whose + last insn is LAST. This may be a group of insns used to compute a + value directly or can contain a library call. */ + +static int +libcall_benefit (last) + rtx last; +{ + rtx insn; + int benefit = 0; + + for (insn = XEXP (find_reg_note (last, REG_RETVAL, 0), 0); + insn != last; insn = NEXT_INSN (insn)) + { + if (GET_CODE (insn) == CALL_INSN) + benefit += 10; /* Assume at least this many insns in a library + routine. */ + else if (GET_CODE (insn) == INSN + && GET_CODE (PATTERN (insn)) != USE + && GET_CODE (PATTERN (insn)) != CLOBBER) + benefit++; + } + + return benefit; +} + +/* Skip COUNT insns from INSN, counting library calls as 1 insn. */ + +static rtx +skip_consec_insns (insn, count) + rtx insn; + int count; +{ + for (; count > 0; count--) + { + rtx temp; + + /* If first insn of libcall sequence, skip to end. */ + /* Do this at start of loop, since INSN is guaranteed to + be an insn here. */ + if (GET_CODE (insn) != NOTE + && (temp = find_reg_note (insn, REG_LIBCALL, 0))) + insn = XEXP (temp, 0); + + do insn = NEXT_INSN (insn); + while (GET_CODE (insn) == NOTE); + } + + return insn; +} + +/* Ignore any movable whose insn falls within a libcall + which is part of another movable. + We make use of the fact that the movable for the libcall value + was made later and so appears later on the chain. */ + +static void +ignore_some_movables (movables) + struct movable *movables; +{ + register struct movable *m, *m1; + + for (m = movables; m; m = m->next) + { + /* Is this a movable for the value of a libcall? */ + rtx note = find_reg_note (m->insn, REG_RETVAL, 0); + if (note) + { + rtx insn; + /* Check for earlier movables inside that range, + and mark them invalid. We cannot use LUIDs here because + insns created by loop.c for prior loops don't have LUIDs. + Rather than reject all such insns from movables, we just + explicitly check each insn in the libcall (since invariant + libcalls aren't that common). */ + for (insn = XEXP (note, 0); insn != m->insn; insn = NEXT_INSN (insn)) + for (m1 = movables; m1 != m; m1 = m1->next) + if (m1->insn == insn) + m1->done = 1; + } + } +} + +/* For each movable insn, see if the reg that it loads + leads when it dies right into another conditionally movable insn. + If so, record that the second insn "forces" the first one, + since the second can be moved only if the first is. */ + +static void +force_movables (movables) + struct movable *movables; +{ + register struct movable *m, *m1; + for (m1 = movables; m1; m1 = m1->next) + /* Omit this if moving just the (SET (REG) 0) of a zero-extend. */ + if (!m1->partial && !m1->done) + { + int regno = m1->regno; + for (m = m1->next; m; m = m->next) + /* ??? Could this be a bug? What if CSE caused the + register of M1 to be used after this insn? + Since CSE does not update regno_last_uid, + this insn M->insn might not be where it dies. + But very likely this doesn't matter; what matters is + that M's reg is computed from M1's reg. */ + if (INSN_UID (m->insn) == regno_last_uid[regno] + && !m->done) + break; + if (m != 0 && m->set_src == m1->set_dest + /* If m->consec, m->set_src isn't valid. */ + && m->consec == 0) + m = 0; + + /* Increase the priority of the moving the first insn + since it permits the second to be moved as well. */ + if (m != 0) + { + m->forces = m1; + m1->lifetime += m->lifetime; + m1->savings += m1->savings; + } + } +} + +/* Find invariant expressions that are equal and can be combined into + one register. */ + +static void +combine_movables (movables, nregs) + struct movable *movables; + int nregs; +{ + register struct movable *m; + char *matched_regs = (char *) alloca (nregs); + enum machine_mode mode; + + /* Regs that are set more than once are not allowed to match + or be matched. I'm no longer sure why not. */ + /* Perhaps testing m->consec_sets would be more appropriate here? */ + + for (m = movables; m; m = m->next) + if (m->match == 0 && n_times_used[m->regno] == 1 && !m->partial) + { + register struct movable *m1; + int regno = m->regno; + rtx reg_note, reg_note1; + + bzero (matched_regs, nregs); + matched_regs[regno] = 1; + + for (m1 = movables; m1; m1 = m1->next) + if (m != m1 && m1->match == 0 && n_times_used[m1->regno] == 1 + /* A reg used outside the loop mustn't be eliminated. */ + && !m1->global + /* A reg used for zero-extending mustn't be eliminated. */ + && !m1->partial + && (matched_regs[m1->regno] + || + ( + /* Can combine regs with different modes loaded from the + same constant only if the modes are the same or + if both are integer modes with M wider or the same + width as M1. The check for integer is redundant, but + safe, since the only case of differing destination + modes with equal sources is when both sources are + VOIDmode, i.e., CONST_INT. */ + (GET_MODE (m->set_dest) == GET_MODE (m1->set_dest) + || (GET_MODE_CLASS (GET_MODE (m->set_dest)) == MODE_INT + && GET_MODE_CLASS (GET_MODE (m1->set_dest)) == MODE_INT + && (GET_MODE_BITSIZE (GET_MODE (m->set_dest)) + >= GET_MODE_BITSIZE (GET_MODE (m1->set_dest))))) + /* See if the source of M1 says it matches M. */ + && ((GET_CODE (m1->set_src) == REG + && matched_regs[REGNO (m1->set_src)]) + || rtx_equal_for_loop_p (m->set_src, m1->set_src, + movables)))) + && ((m->dependencies == m1->dependencies) + || rtx_equal_p (m->dependencies, m1->dependencies))) + { + m->lifetime += m1->lifetime; + m->savings += m1->savings; + m1->done = 1; + m1->match = m; + matched_regs[m1->regno] = 1; + } + } + + /* Now combine the regs used for zero-extension. + This can be done for those not marked `global' + provided their lives don't overlap. */ + + for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; + mode = GET_MODE_WIDER_MODE (mode)) + { + register struct movable *m0 = 0; + + /* Combine all the registers for extension from mode MODE. + Don't combine any that are used outside this loop. */ + for (m = movables; m; m = m->next) + if (m->partial && ! m->global + && mode == GET_MODE (SET_SRC (PATTERN (NEXT_INSN (m->insn))))) + { + register struct movable *m1; + int first = uid_luid[regno_first_uid[m->regno]]; + int last = uid_luid[regno_last_uid[m->regno]]; + + if (m0 == 0) + { + /* First one: don't check for overlap, just record it. */ + m0 = m; + continue; + } + + /* Make sure they extend to the same mode. + (Almost always true.) */ + if (GET_MODE (m->set_dest) != GET_MODE (m0->set_dest)) + continue; + + /* We already have one: check for overlap with those + already combined together. */ + for (m1 = movables; m1 != m; m1 = m1->next) + if (m1 == m0 || (m1->partial && m1->match == m0)) + if (! (uid_luid[regno_first_uid[m1->regno]] > last + || uid_luid[regno_last_uid[m1->regno]] < first)) + goto overlap; + + /* No overlap: we can combine this with the others. */ + m0->lifetime += m->lifetime; + m0->savings += m->savings; + m->done = 1; + m->match = m0; + + overlap: ; + } + } +} + +/* Return 1 if regs X and Y will become the same if moved. */ + +static int +regs_match_p (x, y, movables) + rtx x, y; + struct movable *movables; +{ + int xn = REGNO (x); + int yn = REGNO (y); + struct movable *mx, *my; + + for (mx = movables; mx; mx = mx->next) + if (mx->regno == xn) + break; + + for (my = movables; my; my = my->next) + if (my->regno == yn) + break; + + return (mx && my + && ((mx->match == my->match && mx->match != 0) + || mx->match == my + || mx == my->match)); +} + +/* Return 1 if X and Y are identical-looking rtx's. + This is the Lisp function EQUAL for rtx arguments. + + If two registers are matching movables or a movable register and an + equivalent constant, consider them equal. */ + +static int +rtx_equal_for_loop_p (x, y, movables) + rtx x, y; + struct movable *movables; +{ + register int i; + register int j; + register struct movable *m; + register enum rtx_code code; + register char *fmt; + + if (x == y) + return 1; + if (x == 0 || y == 0) + return 0; + + code = GET_CODE (x); + + /* If we have a register and a constant, they may sometimes be + equal. */ + if (GET_CODE (x) == REG && n_times_set[REGNO (x)] == -2 + && CONSTANT_P (y)) + for (m = movables; m; m = m->next) + if (m->move_insn && m->regno == REGNO (x) + && rtx_equal_p (m->set_src, y)) + return 1; + + else if (GET_CODE (y) == REG && n_times_set[REGNO (y)] == -2 + && CONSTANT_P (x)) + for (m = movables; m; m = m->next) + if (m->move_insn && m->regno == REGNO (y) + && rtx_equal_p (m->set_src, x)) + return 1; + + /* Otherwise, rtx's of different codes cannot be equal. */ + if (code != GET_CODE (y)) + return 0; + + /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent. + (REG:SI x) and (REG:HI x) are NOT equivalent. */ + + if (GET_MODE (x) != GET_MODE (y)) + return 0; + + /* These three types of rtx's can be compared nonrecursively. */ + if (code == REG) + return (REGNO (x) == REGNO (y) || regs_match_p (x, y, movables)); + + if (code == LABEL_REF) + return XEXP (x, 0) == XEXP (y, 0); + if (code == SYMBOL_REF) + return XSTR (x, 0) == XSTR (y, 0); + + /* Compare the elements. If any pair of corresponding elements + fail to match, return 0 for the whole things. */ + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + switch (fmt[i]) + { + case 'i': + if (XINT (x, i) != XINT (y, i)) + return 0; + break; + + case 'E': + /* Two vectors must have the same length. */ + if (XVECLEN (x, i) != XVECLEN (y, i)) + return 0; + + /* And the corresponding elements must match. */ + for (j = 0; j < XVECLEN (x, i); j++) + if (rtx_equal_for_loop_p (XVECEXP (x, i, j), XVECEXP (y, i, j), movables) == 0) + return 0; + break; + + case 'e': + if (rtx_equal_for_loop_p (XEXP (x, i), XEXP (y, i), movables) == 0) + return 0; + break; + + case 's': + if (strcmp (XSTR (x, i), XSTR (y, i))) + return 0; + break; + + case 'u': + /* These are just backpointers, so they don't matter. */ + break; + + case '0': + break; + + /* It is believed that rtx's at this level will never + contain anything but integers and other rtx's, + except for within LABEL_REFs and SYMBOL_REFs. */ + default: + abort (); + } + } + return 1; +} + +/* Scan MOVABLES, and move the insns that deserve to be moved. + If two matching movables are combined, replace one reg with the + other throughout. */ + +static void +move_movables (movables, threshold, insn_count, loop_start, end, nregs) + struct movable *movables; + int threshold; + int insn_count; + rtx loop_start; + rtx end; + int nregs; +{ + rtx new_start = 0; + register struct movable *m; + register rtx p; + /* Map of pseudo-register replacements to handle combining + when we move several insns that load the same value + into different pseudo-registers. */ + rtx *reg_map = (rtx *) alloca (nregs * sizeof (rtx)); + char *already_moved = (char *) alloca (nregs); + + bzero (already_moved, nregs); + bzero (reg_map, nregs * sizeof (rtx)); + + num_movables = 0; + + for (m = movables; m; m = m->next) + { + /* Describe this movable insn. */ + + if (loop_dump_stream) + { + fprintf (loop_dump_stream, "Insn %d: regno %d (life %d), ", + INSN_UID (m->insn), m->regno, m->lifetime); + if (m->consec > 0) + fprintf (loop_dump_stream, "consec %d, ", m->consec); + if (m->cond) + fprintf (loop_dump_stream, "cond "); + if (m->force) + fprintf (loop_dump_stream, "force "); + if (m->global) + fprintf (loop_dump_stream, "global "); + if (m->done) + fprintf (loop_dump_stream, "done "); + if (m->move_insn) + fprintf (loop_dump_stream, "move-insn "); + if (m->match) + fprintf (loop_dump_stream, "matches %d ", + INSN_UID (m->match->insn)); + if (m->forces) + fprintf (loop_dump_stream, "forces %d ", + INSN_UID (m->forces->insn)); + } + + /* Count movables. Value used in heuristics in strength_reduce. */ + num_movables++; + + /* Ignore the insn if it's already done (it matched something else). + Otherwise, see if it is now safe to move. */ + + if (!m->done + && (! m->cond + || (1 == invariant_p (m->set_src) + && (m->dependencies == 0 + || 1 == invariant_p (m->dependencies)) + && (m->consec == 0 + || 1 == consec_sets_invariant_p (m->set_dest, + m->consec + 1, + m->insn)))) + && (! m->forces || m->forces->done)) + { + register int regno; + register rtx p; + int savings = m->savings; + + /* We have an insn that is safe to move. + Compute its desirability. */ + + p = m->insn; + regno = m->regno; + + if (loop_dump_stream) + fprintf (loop_dump_stream, "savings %d ", savings); + + if (moved_once[regno]) + { + insn_count *= 2; + + if (loop_dump_stream) + fprintf (loop_dump_stream, "halved since already moved "); + } + + /* An insn MUST be moved if we already moved something else + which is safe only if this one is moved too: that is, + if already_moved[REGNO] is nonzero. */ + + /* An insn is desirable to move if the new lifetime of the + register is no more than THRESHOLD times the old lifetime. + If it's not desirable, it means the loop is so big + that moving won't speed things up much, + and it is liable to make register usage worse. */ + + /* It is also desirable to move if it can be moved at no + extra cost because something else was already moved. */ + + if (already_moved[regno] + || (threshold * savings * m->lifetime) >= insn_count + || (m->forces && m->forces->done + && n_times_used[m->forces->regno] == 1)) + { + int count; + register struct movable *m1; + rtx first; + + /* Now move the insns that set the reg. */ + + if (m->partial && m->match) + { + rtx newpat, i1; + rtx r1, r2; + /* Find the end of this chain of matching regs. + Thus, we load each reg in the chain from that one reg. + And that reg is loaded with 0 directly, + since it has ->match == 0. */ + for (m1 = m; m1->match; m1 = m1->match); + newpat = gen_move_insn (SET_DEST (PATTERN (m->insn)), + SET_DEST (PATTERN (m1->insn))); + i1 = emit_insn_before (newpat, loop_start); + + /* Mark the moved, invariant reg as being allowed to + share a hard reg with the other matching invariant. */ + REG_NOTES (i1) = REG_NOTES (m->insn); + r1 = SET_DEST (PATTERN (m->insn)); + r2 = SET_DEST (PATTERN (m1->insn)); + regs_may_share = gen_rtx (EXPR_LIST, VOIDmode, r1, + gen_rtx (EXPR_LIST, VOIDmode, r2, + regs_may_share)); + delete_insn (m->insn); + + if (new_start == 0) + new_start = i1; + + if (loop_dump_stream) + fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1)); + } + /* If we are to re-generate the item being moved with a + new move insn, first delete what we have and then emit + the move insn before the loop. */ + else if (m->move_insn) + { + rtx i1, temp; + + for (count = m->consec; count >= 0; count--) + { + /* If this is the first insn of a library call sequence, + skip to the end. */ + if (GET_CODE (p) != NOTE + && (temp = find_reg_note (p, REG_LIBCALL, 0))) + p = XEXP (temp, 0); + + /* If this is the last insn of a libcall sequence, then + delete every insn in the sequence except the last. + The last insn is handled in the normal manner. */ + if (GET_CODE (p) != NOTE + && (temp = find_reg_note (p, REG_RETVAL, 0))) + { + temp = XEXP (temp, 0); + while (temp != p) + temp = delete_insn (temp); + } + + p = delete_insn (p); + } + + start_sequence (); + emit_move_insn (m->set_dest, m->set_src); + temp = gen_sequence (); + end_sequence (); + + i1 = emit_insn_before (temp, loop_start); + if (! find_reg_note (i1, REG_EQUAL, 0)) + REG_NOTES (i1) + = gen_rtx (EXPR_LIST, + m->is_equiv ? REG_EQUIV : REG_EQUAL, + m->set_src, REG_NOTES (i1)); + + if (loop_dump_stream) + fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1)); + + /* The more regs we move, the less we like moving them. */ + threshold -= 3; + } + else + { + for (count = m->consec; count >= 0; count--) + { + rtx i1, temp; + + /* If first insn of libcall sequence, skip to end. */ + /* Do this at start of loop, since p is guaranteed to + be an insn here. */ + if (GET_CODE (p) != NOTE + && (temp = find_reg_note (p, REG_LIBCALL, 0))) + p = XEXP (temp, 0); + + /* If last insn of libcall sequence, move all + insns except the last before the loop. The last + insn is handled in the normal manner. */ + if (GET_CODE (p) != NOTE + && (temp = find_reg_note (p, REG_RETVAL, 0))) + { + rtx fn_address = 0; + rtx fn_reg = 0; + rtx fn_address_insn = 0; + + first = 0; + for (temp = XEXP (temp, 0); temp != p; + temp = NEXT_INSN (temp)) + { + rtx body; + rtx n; + rtx next; + + if (GET_CODE (temp) == NOTE) + continue; + + body = PATTERN (temp); + + /* Find the next insn after TEMP, + not counting USE or NOTE insns. */ + for (next = NEXT_INSN (temp); next != p; + next = NEXT_INSN (next)) + if (! (GET_CODE (next) == INSN + && GET_CODE (PATTERN (next)) == USE) + && GET_CODE (next) != NOTE) + break; + + /* If that is the call, this may be the insn + that loads the function address. + + Extract the function address from the insn + that loads it into a register. + If this insn was cse'd, we get incorrect code. + + So emit a new move insn that copies the + function address into the register that the + call insn will use. flow.c will delete any + redundant stores that we have created. */ + if (GET_CODE (next) == CALL_INSN + && GET_CODE (body) == SET + && GET_CODE (SET_DEST (body)) == REG + && (n = find_reg_note (temp, REG_EQUAL, 0))) + { + fn_reg = SET_SRC (body); + if (GET_CODE (fn_reg) != REG) + fn_reg = SET_DEST (body); + fn_address = XEXP (n, 0); + fn_address_insn = temp; + } + /* We have the call insn. + If it uses the register we suspect it might, + load it with the correct address directly. */ + if (GET_CODE (temp) == CALL_INSN + && fn_address != 0 + && reg_mentioned_p (fn_reg, body)) + emit_insn_after (gen_move_insn (fn_reg, + fn_address), + fn_address_insn); + + if (GET_CODE (temp) == CALL_INSN) + i1 = emit_call_insn_before (body, loop_start); + else + i1 = emit_insn_before (body, loop_start); + if (first == 0) + first = i1; + if (temp == fn_address_insn) + fn_address_insn = i1; + REG_NOTES (i1) = REG_NOTES (temp); + delete_insn (temp); + } + } + if (m->savemode != VOIDmode) + { + /* P sets REG to zero; but we should clear only + the bits that are not covered by the mode + m->savemode. */ + rtx reg = m->set_dest; + rtx sequence; + rtx tem; + + start_sequence (); + tem = expand_binop + (GET_MODE (reg), and_optab, reg, + gen_rtx (CONST_INT, VOIDmode, + ((1 << GET_MODE_BITSIZE (m->savemode))) + - 1), + reg, 1, OPTAB_LIB_WIDEN); + if (tem == 0) + abort (); + if (tem != reg) + emit_move_insn (reg, tem); + sequence = gen_sequence (); + end_sequence (); + i1 = emit_insn_before (sequence, loop_start); + } + else if (GET_CODE (p) == CALL_INSN) + i1 = emit_call_insn_before (PATTERN (p), loop_start); + else + i1 = emit_insn_before (PATTERN (p), loop_start); + + REG_NOTES (i1) = REG_NOTES (p); + + if (new_start == 0) + new_start = i1; + + if (loop_dump_stream) + fprintf (loop_dump_stream, " moved to %d", + INSN_UID (i1)); + +#if 0 + /* This isn't needed because REG_NOTES is copied + below and is wrong since P might be a PARALLEL. */ + if (REG_NOTES (i1) == 0 + && ! m->partial /* But not if it's a zero-extend clr. */ + && ! m->global /* and not if used outside the loop + (since it might get set outside). */ + && CONSTANT_P (SET_SRC (PATTERN (p)))) + REG_NOTES (i1) + = gen_rtx (EXPR_LIST, REG_EQUAL, + SET_SRC (PATTERN (p)), REG_NOTES (i1)); +#endif + + /* If library call, now fix the REG_NOTES that contain + insn pointers, namely REG_LIBCALL on FIRST + and REG_RETVAL on I1. */ + if (temp = find_reg_note (i1, REG_RETVAL, 0)) + { + XEXP (temp, 0) = first; + temp = find_reg_note (first, REG_LIBCALL, 0); + XEXP (temp, 0) = i1; + } + + delete_insn (p); + do p = NEXT_INSN (p); + while (p && GET_CODE (p) == NOTE); + } + + /* The more regs we move, the less we like moving them. */ + threshold -= 3; + } + + /* Any other movable that loads the same register + MUST be moved. */ + already_moved[regno] = 1; + + /* This reg has been moved out of one loop. */ + moved_once[regno] = 1; + + /* The reg set here is now invariant. */ + if (! m->partial) + n_times_set[regno] = 0; + + m->done = 1; + + /* Change the length-of-life info for the register + to say it lives at least the full length of this loop. + This will help guide optimizations in outer loops. */ + + if (uid_luid[regno_first_uid[regno]] > INSN_LUID (loop_start)) + /* This is the old insn before all the moved insns. + We can't use the moved insn because it is out of range + in uid_luid. Only the old insns have luids. */ + regno_first_uid[regno] = INSN_UID (loop_start); + if (uid_luid[regno_last_uid[regno]] < INSN_LUID (end)) + regno_last_uid[regno] = INSN_UID (end); + + /* Combine with this moved insn any other matching movables. */ + + if (! m->partial) + for (m1 = movables; m1; m1 = m1->next) + if (m1->match == m) + { + rtx temp; + + /* Schedule the reg loaded by M1 + for replacement so that shares the reg of M. + If the modes differ (only possible in restricted + circumstances, make a SUBREG. */ + if (GET_MODE (m->set_dest) == GET_MODE (m1->set_dest)) + reg_map[m1->regno] = m->set_dest; + else + reg_map[m1->regno] + = gen_lowpart_common (GET_MODE (m1->set_dest), + m->set_dest); + + /* Get rid of the matching insn + and prevent further processing of it. */ + m1->done = 1; + + /* if library call, delete all insn except last, which + is deleted below */ + if (temp = find_reg_note (m1->insn, REG_RETVAL, 0)) + { + for (temp = XEXP (temp, 0); temp != m1->insn; + temp = NEXT_INSN (temp)) + delete_insn (temp); + } + delete_insn (m1->insn); + + /* Any other movable that loads the same register + MUST be moved. */ + already_moved[m1->regno] = 1; + + /* The reg merged here is now invariant, + if the reg it matches is invariant. */ + if (! m->partial) + n_times_set[m1->regno] = 0; + } + } + else if (loop_dump_stream) + fprintf (loop_dump_stream, "not desirable"); + } + else if (loop_dump_stream && !m->match) + fprintf (loop_dump_stream, "not safe"); + + if (loop_dump_stream) + fprintf (loop_dump_stream, "\n"); + } + + if (new_start == 0) + new_start = loop_start; + + /* Go through all the instructions in the loop, making + all the register substitutions scheduled in REG_MAP. */ + for (p = new_start; p != end; p = NEXT_INSN (p)) + if (GET_CODE (p) == INSN || GET_CODE (p) == JUMP_INSN + || GET_CODE (p) == CALL_INSN) + { + replace_regs (PATTERN (p), reg_map, nregs, 0); + replace_regs (REG_NOTES (p), reg_map, nregs, 0); + } +} + +#if 0 +/* Scan X and replace the address of any MEM in it with ADDR. + REG is the address that MEM should have before the replacement. */ + +static void +replace_call_address (x, reg, addr) + rtx x, reg, addr; +{ + register enum rtx_code code; + register int i; + register char *fmt; + + if (x == 0) + return; + code = GET_CODE (x); + switch (code) + { + case PC: + case CC0: + case CONST_INT: + case CONST_DOUBLE: + case CONST: + case SYMBOL_REF: + case LABEL_REF: + case REG: + return; + + case SET: + /* Short cut for very common case. */ + replace_call_address (XEXP (x, 1), reg, addr); + return; + + case CALL: + /* Short cut for very common case. */ + replace_call_address (XEXP (x, 0), reg, addr); + return; + + case MEM: + /* If this MEM uses a reg other than the one we expected, + something is wrong. */ + if (XEXP (x, 0) != reg) + abort (); + XEXP (x, 0) = addr; + return; + } + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + replace_call_address (XEXP (x, i), reg, addr); + if (fmt[i] == 'E') + { + register int j; + for (j = 0; j < XVECLEN (x, i); j++) + replace_call_address (XVECEXP (x, i, j), reg, addr); + } + } +} +#endif + +/* Return the number of memory refs to addresses that vary + in the rtx X. */ + +static int +count_nonfixed_reads (x) + rtx x; +{ + register enum rtx_code code; + register int i; + register char *fmt; + int value; + + if (x == 0) + return 0; + + code = GET_CODE (x); + switch (code) + { + case PC: + case CC0: + case CONST_INT: + case CONST_DOUBLE: + case CONST: + case SYMBOL_REF: + case LABEL_REF: + case REG: + return 0; + + case MEM: + return ((invariant_p (XEXP (x, 0)) != 1) + + count_nonfixed_reads (XEXP (x, 0))); + } + + value = 0; + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + value += count_nonfixed_reads (XEXP (x, i)); + if (fmt[i] == 'E') + { + register int j; + for (j = 0; j < XVECLEN (x, i); j++) + value += count_nonfixed_reads (XVECEXP (x, i, j)); + } + } + return value; +} + + +#if 0 +/* P is an instruction that sets a register to the result of a ZERO_EXTEND. + Replace it with an instruction to load just the low bytes + if the machine supports such an instruction, + and insert above LOOP_START an instruction to clear the register. */ + +static void +constant_high_bytes (p, loop_start) + rtx p, loop_start; +{ + register rtx new; + register int insn_code_number; + + /* Try to change (SET (REG ...) (ZERO_EXTEND (..:B ...))) + to (SET (STRICT_LOW_PART (SUBREG:B (REG...))) ...). */ + + new = gen_rtx (SET, VOIDmode, + gen_rtx (STRICT_LOW_PART, VOIDmode, + gen_rtx (SUBREG, GET_MODE (XEXP (SET_SRC (PATTERN (p)), 0)), + SET_DEST (PATTERN (p)), + 0)), + XEXP (SET_SRC (PATTERN (p)), 0)); + insn_code_number = recog (new, p); + + if (insn_code_number) + { + register int i; + + /* Clear destination register before the loop. */ + emit_insn_before (gen_rtx (SET, VOIDmode, + SET_DEST (PATTERN (p)), + const0_rtx), + loop_start); + + /* Inside the loop, just load the low part. */ + PATTERN (p) = new; + } +} +#endif + +/* Scan a loop setting the variables `unknown_address_altered', + `num_mem_sets', `loop_continue', loops_enclosed' and `loop_has_call'. + Also, fill in the array `loop_store_mems'. */ + +static void +prescan_loop (start, end) + rtx start, end; +{ + register int level = 1; + register rtx insn; + + unknown_address_altered = 0; + loop_has_call = 0; + loop_store_mems_idx = 0; + + num_mem_sets = 0; + loops_enclosed = 1; + loop_continue = 0; + + for (insn = NEXT_INSN (start); insn != NEXT_INSN (end); + insn = NEXT_INSN (insn)) + { + if (GET_CODE (insn) == NOTE) + { + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) + { + ++level; + /* Count number of loops contained in this one. */ + loops_enclosed++; + } + else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END) + { + --level; + if (level == 0) + { + end = insn; + break; + } + } + else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_CONT) + { + if (level == 1) + loop_continue = insn; + } + } + else if (GET_CODE (insn) == CALL_INSN) + { + unknown_address_altered = 1; + loop_has_call = 1; + } + else + { + if (GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN) + note_stores (PATTERN (insn), note_addr_stored); + } + } +} + +/* Scan the function looking for loops. Record the start and end of each loop. + Also mark as invalid loops any loops that contain a setjmp or are branched + to from outside the loop. */ + +static void +find_and_verify_loops (f) + rtx f; +{ + rtx insn; + int current_loop = -1; + int next_loop = -1; + int loop; + + /* If there are jumps to undefined labels, + treat them as jumps out of any/all loops. + This also avoids writing past end of tables when there are no loops. */ + uid_loop_num[0] = -1; + + /* Find boundaries of loops, mark which loops are contained within + loops, and invalidate loops that have setjmp. */ + + for (insn = f; insn; insn = NEXT_INSN (insn)) + { + if (GET_CODE (insn) == NOTE) + switch (NOTE_LINE_NUMBER (insn)) + { + case NOTE_INSN_LOOP_BEG: + loop_number_loop_starts[++next_loop] = insn; + loop_number_loop_ends[next_loop] = 0; + loop_outer_loop[next_loop] = current_loop; + loop_invalid[next_loop] = 0; + loop_number_exit_labels[next_loop] = 0; + current_loop = next_loop; + break; + + case NOTE_INSN_SETJMP: + /* In this case, we must invalidate our current loop and any + enclosing loop. */ + for (loop = current_loop; loop != -1; loop = loop_outer_loop[loop]) + { + loop_invalid[loop] = 1; + if (loop_dump_stream) + fprintf (loop_dump_stream, + "\nLoop at %d ignored due to setjmp.\n", + INSN_UID (loop_number_loop_starts[loop])); + } + break; + + case NOTE_INSN_LOOP_END: + if (current_loop == -1) + abort (); + + loop_number_loop_ends[current_loop] = insn; + current_loop = loop_outer_loop[current_loop]; + break; + + } + + /* Note that this will mark the NOTE_INSN_LOOP_END note as being in the + enclosing loop, but this doesn't matter. */ + uid_loop_num[INSN_UID (insn)] = current_loop; + } + + /* Now scan all JUMP_INSN's in the function. If any branches into a loop + that it is not contained within, that loop is marked invalid. + + Also look for blocks of code ending in an unconditional branch that + exits the loop. If such a block is surrounded by a conditional + branch around the block, move the block elsewhere (see below) and + invert the jump to point to the code block. This may eliminate a + label in our loop and will simplify processing by both us and a + possible second cse pass. */ + + for (insn = f; insn; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == JUMP_INSN) + { + int this_loop_num = uid_loop_num[INSN_UID (insn)]; + + mark_loop_jump (PATTERN (insn), this_loop_num); + + /* See if this is an unconditional branch outside the loop. */ + if (this_loop_num != -1 + && (GET_CODE (PATTERN (insn)) == RETURN + || (simplejump_p (insn) + && (uid_loop_num[INSN_UID (JUMP_LABEL (insn))] + != this_loop_num)))) + { + rtx p; + rtx our_next = next_real_insn (insn); + + /* Go backwards until we reach the start of the loop, a label, + or a JUMP_INSN. */ + for (p = PREV_INSN (insn); + GET_CODE (p) != CODE_LABEL + && ! (GET_CODE (p) == NOTE + && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG) + && GET_CODE (p) != JUMP_INSN; + p = PREV_INSN (p)) + ; + + /* If we stopped on a JUMP_INSN to the next insn after INSN, + we have a block of code to try to move. + + We look backward and then forward from the target of INSN + to find a BARRIER at the same loop depth as the target. + If we find such a BARRIER, we make a new label for the start + of the block, invert the jump in P and point it to that label, + and move the block of code to the spot we found. */ + + if (GET_CODE (p) == JUMP_INSN + && JUMP_LABEL (p) != 0 + && condjump_p (p) + && ! simplejump_p (p) + && next_real_insn (JUMP_LABEL (p)) == our_next) + { + rtx target + = JUMP_LABEL (insn) ? JUMP_LABEL (insn) : get_last_insn (); + int target_loop_num = uid_loop_num[INSN_UID (target)]; + rtx loc; + + for (loc = target; loc; loc = PREV_INSN (loc)) + if (GET_CODE (loc) == BARRIER + && uid_loop_num[INSN_UID (loc)] == target_loop_num) + break; + + if (loc == 0) + for (loc = target; loc; loc = NEXT_INSN (loc)) + if (GET_CODE (loc) == BARRIER + && uid_loop_num[INSN_UID (loc)] == target_loop_num) + break; + + if (loc) + { + rtx cond_label = JUMP_LABEL (p); + rtx new_label = get_label_after (p); + + /* Ensure our label doesn't go away. */ + LABEL_NUSES (cond_label)++; + + /* Verify that uid_loop_num is large enough and that + we can invert P. */ + if (INSN_UID (new_label) < max_uid_for_loop + && invert_jump (p, new_label)) + { + rtx q, r; + + /* Include the BARRIER after INSN and copy the + block after LOC. */ + squeeze_notes (new_label, NEXT_INSN (insn)); + reorder_insns (new_label, NEXT_INSN (insn), loc); + + /* All those insns are now in TARGET_LOOP_NUM. */ + for (q = new_label; q != NEXT_INSN (NEXT_INSN (insn)); + q = NEXT_INSN (q)) + uid_loop_num[INSN_UID (q)] = target_loop_num; + + /* The label jumped to by INSN is no longer a loop exit. + Unless INSN does not have a label (e.g., it is a + RETURN insn), search loop_number_exit_labels to find + its label_ref, and remove it. Also turn off + LABEL_OUTSIDE_LOOP_P bit. */ + if (JUMP_LABEL (insn)) + { + for (q = 0, + r = loop_number_exit_labels[this_loop_num]; + r; q = r, r = LABEL_NEXTREF (r)) + if (XEXP (r, 0) == JUMP_LABEL (insn)) + { + LABEL_OUTSIDE_LOOP_P (r) = 0; + if (q) + LABEL_NEXTREF (q) = LABEL_NEXTREF (r); + else + loop_number_exit_labels[this_loop_num] + = LABEL_NEXTREF (r); + break; + } + + /* If we didn't find it, then something is wrong. */ + if (! r) + abort (); + } + + /* P is now a jump outside the loop, so it must be put + in loop_number_exit_labels, and marked as such. + The easiest way to do this is to just call + mark_loop_jump again for P. */ + mark_loop_jump (PATTERN (p), this_loop_num); + + /* If INSN now jumps to the insn after it, + delete INSN. */ + if (JUMP_LABEL (insn) != 0 + && (next_real_insn (JUMP_LABEL (insn)) + == next_real_insn (insn))) + delete_insn (insn); + } + + /* Continue the loop after where the conditional + branch used to jump, since the only branch insn + in the block (if it still remains) is an inter-loop + branch and hence needs no processing. */ + insn = NEXT_INSN (cond_label); + + if (--LABEL_NUSES (cond_label) == 0) + delete_insn (cond_label); + } + } + } + } +} + +/* If any label in X jumps to a loop different from LOOP_NUM and any of the + loops it is contained in, mark the target loop invalid. + + For speed, we assume that X is part of a pattern of a JUMP_INSN. */ + +static void +mark_loop_jump (x, loop_num) + rtx x; + int loop_num; +{ + int dest_loop; + int outer_loop; + int i; + + switch (GET_CODE (x)) + { + case PC: + case USE: + case CLOBBER: + case REG: + case MEM: + case CONST_INT: + case CONST_DOUBLE: + case RETURN: + return; + + case CONST: + /* There could be a label reference in here. */ + mark_loop_jump (XEXP (x, 0), loop_num); + return; + + case PLUS: + case MINUS: + case MULT: + case LSHIFT: + mark_loop_jump (XEXP (x, 0), loop_num); + mark_loop_jump (XEXP (x, 1), loop_num); + return; + + case SIGN_EXTEND: + case ZERO_EXTEND: + mark_loop_jump (XEXP (x, 0), loop_num); + return; + + case LABEL_REF: + dest_loop = uid_loop_num[INSN_UID (XEXP (x, 0))]; + + /* Link together all labels that branch outside the loop. This + is used by final_[bg]iv_value and the loop unrolling code. Also + mark this LABEL_REF so we know that this branch should predict + false. */ + + if (dest_loop != loop_num && loop_num != -1) + { + LABEL_OUTSIDE_LOOP_P (x) = 1; + LABEL_NEXTREF (x) = loop_number_exit_labels[loop_num]; + loop_number_exit_labels[loop_num] = x; + } + + /* If this is inside a loop, but not in the current loop or one enclosed + by it, it invalidates at least one loop. */ + + if (dest_loop == -1) + return; + + /* We must invalidate every nested loop containing the target of this + label, except those that also contain the jump insn. */ + + for (; dest_loop != -1; dest_loop = loop_outer_loop[dest_loop]) + { + /* Stop when we reach a loop that also contains the jump insn. */ + for (outer_loop = loop_num; outer_loop != -1; + outer_loop = loop_outer_loop[outer_loop]) + if (dest_loop == outer_loop) + return; + + /* If we get here, we know we need to invalidate a loop. */ + if (loop_dump_stream && ! loop_invalid[dest_loop]) + fprintf (loop_dump_stream, + "\nLoop at %d ignored due to multiple entry points.\n", + INSN_UID (loop_number_loop_starts[dest_loop])); + + loop_invalid[dest_loop] = 1; + } + return; + + case SET: + /* If this is not setting pc, ignore. */ + if (SET_DEST (x) == pc_rtx) + mark_loop_jump (SET_SRC (x), loop_num); + return; + + case IF_THEN_ELSE: + mark_loop_jump (XEXP (x, 1), loop_num); + mark_loop_jump (XEXP (x, 2), loop_num); + return; + + case PARALLEL: + case ADDR_VEC: + for (i = 0; i < XVECLEN (x, 0); i++) + mark_loop_jump (XVECEXP (x, 0, i), loop_num); + return; + + case ADDR_DIFF_VEC: + for (i = 0; i < XVECLEN (x, 1); i++) + mark_loop_jump (XVECEXP (x, 1, i), loop_num); + return; + + default: + /* Nothing else should occur in a JUMP_INSN. */ + abort (); + } +} + +/* Return nonzero if there is a label in the range from + insn INSN to and including the insn whose luid is END + INSN must have an assigned luid (i.e., it must not have + been previously created by loop.c). */ + +static int +labels_in_range_p (insn, end) + rtx insn; + int end; +{ + while (insn && INSN_LUID (insn) <= end) + { + if (GET_CODE (insn) == CODE_LABEL) + return 1; + insn = NEXT_INSN (insn); + } + + return 0; +} + +/* Record that a memory reference X is being set. */ + +static void +note_addr_stored (x) + rtx x; +{ + register int i; + + if (x == 0 || GET_CODE (x) != MEM) + return; + + /* Count number of memory writes. + This affects heuristics in strength_reduce. */ + num_mem_sets++; + + if (unknown_address_altered) + return; + + for (i = 0; i < loop_store_mems_idx; i++) + if (rtx_equal_p (XEXP (loop_store_mems[i], 0), XEXP (x, 0)) + && MEM_IN_STRUCT_P (x) == MEM_IN_STRUCT_P (loop_store_mems[i])) + { + /* We are storing at the same address as previously noted. Save the + wider reference, treating BLKmode as wider. */ + if (GET_MODE (x) == BLKmode + || (GET_MODE_SIZE (GET_MODE (x)) + > GET_MODE_SIZE (GET_MODE (loop_store_mems[i])))) + loop_store_mems[i] = x; + break; + } + + if (i == NUM_STORES) + unknown_address_altered = 1; + + else if (i == loop_store_mems_idx) + loop_store_mems[loop_store_mems_idx++] = x; +} + +/* Return nonzero if the rtx X is invariant over the current loop. + + The value is 2 if we refer to something only conditionally invariant. + + If `unknown_address_altered' is nonzero, no memory ref is invariant. + Otherwise, a memory ref is invariant if it does not conflict with + anything stored in `loop_store_mems'. */ + +int +invariant_p (x) + register rtx x; +{ + register int i; + register enum rtx_code code; + register char *fmt; + int conditional = 0; + + if (x == 0) + return 1; + code = GET_CODE (x); + switch (code) + { + case CONST_INT: + case CONST_DOUBLE: + case SYMBOL_REF: + case CONST: + return 1; + + case LABEL_REF: + /* A LABEL_REF is normally invariant, however, if we are unrolling + loops, and this label is inside the loop, then it isn't invariant. + This is because each unrolled copy of the loop body will have + a copy of this label. If this was invariant, then an insn loading + the address of this label into a register might get moved outside + the loop, and then each loop body would end up using the same label. + + We don't know the loop bounds here though, so just fail for all + labels. */ + if (flag_unroll_loops) + return 0; + else + return 1; + + case PC: + case CC0: + case UNSPEC_VOLATILE: + return 0; + + case REG: + /* We used to check RTX_UNCHANGING_P (x) here, but that is invalid + since the reg might be set by initialization within the loop. */ + if (x == frame_pointer_rtx || x == arg_pointer_rtx) + return 1; + if (loop_has_call + && REGNO (x) < FIRST_PSEUDO_REGISTER && call_used_regs[REGNO (x)]) + return 0; + if (n_times_set[REGNO (x)] < 0) + return 2; + return n_times_set[REGNO (x)] == 0; + + case MEM: + /* Read-only items (such as constants in a constant pool) are + invariant if their address is. */ + if (RTX_UNCHANGING_P (x)) + break; + + /* If we filled the table (or had a subroutine call), any location + in memory could have been clobbered. */ + if (unknown_address_altered + /* Don't mess with volatile memory references. */ + || MEM_VOLATILE_P (x)) + return 0; + + /* See if there is any dependence between a store and this load. */ + for (i = loop_store_mems_idx - 1; i >= 0; i--) + if (true_dependence (loop_store_mems[i], x)) + return 0; + + /* It's not invalidated by a store in memory + but we must still verify the address is invariant. */ + break; + + case ASM_OPERANDS: + /* Don't mess with insns declared volatile. */ + if (MEM_VOLATILE_P (x)) + return 0; + } + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + { + int tem = invariant_p (XEXP (x, i)); + if (tem == 0) + return 0; + if (tem == 2) + conditional = 1; + } + else if (fmt[i] == 'E') + { + register int j; + for (j = 0; j < XVECLEN (x, i); j++) + { + int tem = invariant_p (XVECEXP (x, i, j)); + if (tem == 0) + return 0; + if (tem == 2) + conditional = 1; + } + + } + } + + return 1 + conditional; +} + +/* Return 1 if OTHER (a mem ref) overlaps the area of memory + which is SIZE bytes starting at BASE. */ + +int +addr_overlap_p (other, base, size) + rtx other; + rtx base; + int size; +{ + int start = 0, end; + + if (GET_CODE (base) == CONST) + base = XEXP (base, 0); + if (GET_CODE (base) == PLUS + && GET_CODE (XEXP (base, 1)) == CONST_INT) + { + start = INTVAL (XEXP (base, 1)); + base = XEXP (base, 0); + } + + end = start + size; + return refers_to_mem_p (other, base, start, end); +} + +/* Return nonzero if all the insns in the loop that set REG + are INSN and the immediately following insns, + and if each of those insns sets REG in an invariant way + (not counting uses of REG in them). + + The value is 2 if some of these insns are only conditionally invariant. + + We assume that INSN itself is the first set of REG + and that its source is invariant. */ + +static int +consec_sets_invariant_p (reg, n_sets, insn) + int n_sets; + rtx reg, insn; +{ + register rtx p = insn; + register int regno = REGNO (reg); + rtx temp; + /* Number of sets we have to insist on finding after INSN. */ + int count = n_sets - 1; + int old = n_times_set[regno]; + int value = 0; + int this; + + /* If N_SETS hit the limit, we can't rely on its value. */ + if (n_sets == 127) + return 0; + + n_times_set[regno] = 0; + + while (count > 0) + { + register enum rtx_code code; + rtx set; + + p = NEXT_INSN (p); + code = GET_CODE (p); + + /* If library call, skip to end of of it. */ + if (code == INSN && (temp = find_reg_note (p, REG_LIBCALL, 0))) + p = XEXP (temp, 0); + + this = 0; + if (code == INSN + && (set = single_set (p)) + && GET_CODE (SET_DEST (set)) == REG + && REGNO (SET_DEST (set)) == regno) + { + this = invariant_p (SET_SRC (set)); + if (this != 0) + value |= this; + else if (temp = find_reg_note (p, REG_EQUAL, 0)) + { + this = invariant_p (XEXP (temp, 0)); + if (this != 0) + value |= this; + } + } + if (this != 0) + count--; + else if (code != NOTE) + { + n_times_set[regno] = old; + return 0; + } + } + + n_times_set[regno] = old; + /* If invariant_p ever returned 2, we return 2. */ + return 1 + (value & 2); +} + +#if 0 +/* I don't think this condition is sufficient to allow INSN + to be moved, so we no longer test it. */ + +/* Return 1 if all insns in the basic block of INSN and following INSN + that set REG are invariant according to TABLE. */ + +static int +all_sets_invariant_p (reg, insn, table) + rtx reg, insn; + short *table; +{ + register rtx p = insn; + register int regno = REGNO (reg); + + while (1) + { + register enum rtx_code code; + p = NEXT_INSN (p); + code = GET_CODE (p); + if (code == CODE_LABEL || code == JUMP_INSN) + return 1; + if (code == INSN && GET_CODE (PATTERN (p)) == SET + && GET_CODE (SET_DEST (PATTERN (p))) == REG + && REGNO (SET_DEST (PATTERN (p))) == regno) + { + if (!invariant_p (SET_SRC (PATTERN (p)), table)) + return 0; + } + } +} +#endif /* 0 */ + +/* Look at all uses (not sets) of registers in X. For each, if it is + the single use, set USAGE[REGNO] to INSN; if there was a previous use in + a different insn, set USAGE[REGNO] to const0_rtx. */ + +static void +find_single_use_in_loop (insn, x, usage) + rtx insn; + rtx x; + rtx *usage; +{ + enum rtx_code code = GET_CODE (x); + char *fmt = GET_RTX_FORMAT (code); + int i, j; + + if (code == REG) + usage[REGNO (x)] + = (usage[REGNO (x)] != 0 && usage[REGNO (x)] != insn) + ? const0_rtx : insn; + + else if (code == SET) + { + /* Don't count SET_DEST if it is a REG; otherwise count things + in SET_DEST because if a register is partially modified, it won't + show up as a potential movable so we don't care how USAGE is set + for it. */ + if (GET_CODE (SET_DEST (x)) != REG) + find_single_use_in_loop (insn, SET_DEST (x), usage); + find_single_use_in_loop (insn, SET_SRC (x), usage); + } + else + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e' && XEXP (x, i) != 0) + find_single_use_in_loop (insn, XEXP (x, i), usage); + else if (fmt[i] == 'E') + for (j = XVECLEN (x, i) - 1; j >= 0; j--) + find_single_use_in_loop (insn, XVECEXP (x, i, j), usage); + } +} + +/* Increment N_TIMES_SET at the index of each register + that is modified by an insn between FROM and TO. + If the value of an element of N_TIMES_SET becomes 127 or more, + stop incrementing it, to avoid overflow. + + Store in SINGLE_USAGE[I] the single insn in which register I is + used, if it is only used once. Otherwise, it is set to 0 (for no + uses) or const0_rtx for more than one use. This parameter may be zero, + in which case this processing is not done. + + Store in *COUNT_PTR the number of actual instruction + in the loop. We use this to decide what is worth moving out. */ + +/* last_set[n] is nonzero iff reg n has been set in the current basic block. + In that case, it is the insn that last set reg n. */ + +static void +count_loop_regs_set (from, to, may_not_move, single_usage, count_ptr, nregs) + register rtx from, to; + char *may_not_move; + rtx *single_usage; + int *count_ptr; + int nregs; +{ + register rtx *last_set = (rtx *) alloca (nregs * sizeof (rtx)); + register rtx insn; + register int count = 0; + register rtx dest; + + bzero (last_set, nregs * sizeof (rtx)); + for (insn = from; insn != to; insn = NEXT_INSN (insn)) + { + if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + { + ++count; + + /* If requested, record registers that have exactly one use. */ + if (single_usage) + { + find_single_use_in_loop (insn, PATTERN (insn), single_usage); + + /* Include uses in REG_EQUAL notes. */ + if (REG_NOTES (insn)) + find_single_use_in_loop (insn, REG_NOTES (insn), single_usage); + } + + if (GET_CODE (PATTERN (insn)) == CLOBBER + && GET_CODE (XEXP (PATTERN (insn), 0)) == REG) + /* Don't move a reg that has an explicit clobber. + We might do so sometimes, but it's not worth the pain. */ + may_not_move[REGNO (XEXP (PATTERN (insn), 0))] = 1; + + if (GET_CODE (PATTERN (insn)) == SET + || GET_CODE (PATTERN (insn)) == CLOBBER) + { + dest = SET_DEST (PATTERN (insn)); + while (GET_CODE (dest) == SUBREG + || GET_CODE (dest) == ZERO_EXTRACT + || GET_CODE (dest) == SIGN_EXTRACT + || GET_CODE (dest) == STRICT_LOW_PART) + dest = XEXP (dest, 0); + if (GET_CODE (dest) == REG) + { + register int regno = REGNO (dest); + /* If this is the first setting of this reg + in current basic block, and it was set before, + it must be set in two basic blocks, so it cannot + be moved out of the loop. */ + if (n_times_set[regno] > 0 && last_set[regno] == 0) + may_not_move[regno] = 1; + /* If this is not first setting in current basic block, + see if reg was used in between previous one and this. + If so, neither one can be moved. */ + if (last_set[regno] != 0 + && reg_used_between_p (dest, last_set[regno], insn)) + may_not_move[regno] = 1; + if (n_times_set[regno] < 127) + ++n_times_set[regno]; + last_set[regno] = insn; + } + } + else if (GET_CODE (PATTERN (insn)) == PARALLEL) + { + register int i; + for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--) + { + register rtx x = XVECEXP (PATTERN (insn), 0, i); + if (GET_CODE (x) == CLOBBER && GET_CODE (XEXP (x, 0)) == REG) + /* Don't move a reg that has an explicit clobber. + It's not worth the pain to try to do it correctly. */ + may_not_move[REGNO (XEXP (x, 0))] = 1; + + if (GET_CODE (x) == SET || GET_CODE (x) == CLOBBER) + { + dest = SET_DEST (x); + while (GET_CODE (dest) == SUBREG + || GET_CODE (dest) == ZERO_EXTRACT + || GET_CODE (dest) == SIGN_EXTRACT + || GET_CODE (dest) == STRICT_LOW_PART) + dest = XEXP (dest, 0); + if (GET_CODE (dest) == REG) + { + register int regno = REGNO (dest); + if (n_times_set[regno] > 0 && last_set[regno] == 0) + may_not_move[regno] = 1; + if (last_set[regno] != 0 + && reg_used_between_p (dest, last_set[regno], insn)) + may_not_move[regno] = 1; + if (n_times_set[regno] < 127) + ++n_times_set[regno]; + last_set[regno] = insn; + } + } + } + } + } + if (GET_CODE (insn) == CODE_LABEL || GET_CODE (insn) == JUMP_INSN) + bzero (last_set, nregs * sizeof (rtx)); + } + *count_ptr = count; +} + +/* Given a loop that is bounded by LOOP_START and LOOP_END + and that is entered at SCAN_START, + return 1 if the register set in SET contained in insn INSN is used by + any insn that precedes INSN in cyclic order starting + from the loop entry point. + + We don't want to use INSN_LUID here because if we restrict INSN to those + that have a valid INSN_LUID, it means we cannot move an invariant out + from an inner loop past two loops. */ + +static int +loop_reg_used_before_p (set, insn, loop_start, scan_start, loop_end) + rtx set, insn, loop_start, scan_start, loop_end; +{ + rtx reg = SET_DEST (set); + rtx p; + + /* Scan forward checking for register usage. If we hit INSN, we + are done. Otherwise, if we hit LOOP_END, wrap around to LOOP_START. */ + for (p = scan_start; p != insn; p = NEXT_INSN (p)) + { + if (GET_RTX_CLASS (GET_CODE (p)) == 'i' + && reg_overlap_mentioned_p (reg, PATTERN (p))) + return 1; + + if (p == loop_end) + p = loop_start; + } + + return 0; +} + +/* A "basic induction variable" or biv is a pseudo reg that is set + (within this loop) only by incrementing or decrementing it. */ +/* A "general induction variable" or giv is a pseudo reg whose + value is a linear function of a biv. */ + +/* Bivs are recognized by `basic_induction_var'; + Givs by `general_induct_var'. */ + +/* Indexed by register number, indicates whether or not register is an + induction variable, and if so what type. */ + +enum iv_mode *reg_iv_type; + +/* Indexed by register number, contains pointer to `struct induction' + if register is an induction variable. This holds general info for + all induction variables. */ + +struct induction **reg_iv_info; + +/* Indexed by register number, contains pointer to `struct iv_class' + if register is a basic induction variable. This holds info describing + the class (a related group) of induction variables that the biv belongs + to. */ + +struct iv_class **reg_biv_class; + +/* The head of a list which links together (via the next field) + every iv class for the current loop. */ + +struct iv_class *loop_iv_list; + +/* Communication with routines called via `note_stores'. */ + +static rtx note_insn; + +/* Dummy register to have non-zero DEST_REG for DEST_ADDR type givs. */ + +static rtx addr_placeholder; + +/* ??? Unfinished optimizations, and possible future optimizations, + for the strength reduction code. */ + +/* ??? There is one more optimization you might be interested in doing: to + allocate pseudo registers for frequently-accessed memory locations. + If the same memory location is referenced each time around, it might + be possible to copy it into a register before and out after. + This is especially useful when the memory location is a variable which + is in a stack slot because somewhere its address is taken. If the + loop doesn't contain a function call and the variable isn't volatile, + it is safe to keep the value in a register for the duration of the + loop. One tricky thing is that the copying of the value back from the + register has to be done on all exits from the loop. You need to check that + all the exits from the loop go to the same place. */ + +/* ??? The interaction of biv elimination, and recognition of 'constant' + bivs, may cause problems. */ + +/* ??? Add heuristics so that DEST_ADDR strength reduction does not cause + performance problems. + + Perhaps don't eliminate things that can be combined with an addressing + mode. Find all givs that have the same biv, mult_val, and add_val; + then for each giv, check to see if its only use dies in a following + memory address. If so, generate a new memory address and check to see + if it is valid. If it is valid, then store the modified memory address, + otherwise, mark the giv as not done so that it will get its own iv. */ + +/* ??? Could try to optimize branches when it is known that a biv is always + positive. */ + +/* ??? When replace a biv in a compare insn, we should replace with closest + giv so that an optimized branch can still be recognized by the combiner, + e.g. the VAX acb insn. */ + +/* ??? Many of the checks involving uid_luid could be simplified if regscan + was rerun in loop_optimize whenever a register was added or moved. + Also, some of the optimizations could be a little less conservative. */ + +/* Perform strength reduction and induction variable elimination. */ + +/* Pseudo registers created during this function will be beyond the last + valid index in several tables including n_times_set and regno_last_uid. + This does not cause a problem here, because the added registers cannot be + givs outside of their loop, and hence will never be reconsidered. + But scan_loop must check regnos to make sure they are in bounds. */ + +static void +strength_reduce (scan_start, end, loop_top, insn_count, + loop_start, loop_end) + rtx scan_start; + rtx end; + rtx loop_top; + int insn_count; + rtx loop_start; + rtx loop_end; +{ + rtx p; + rtx set; + rtx inc_val; + rtx mult_val; + rtx dest_reg; + /* This is 1 if current insn is not executed at least once for every loop + iteration. */ + int not_every_iteration = 0; + /* Temporary list pointers for traversing loop_iv_list. */ + struct iv_class *bl, **backbl; + /* Ratio of extra register life span we can justify + for saving an instruction. More if loop doesn't call subroutines + since in that case saving an insn makes more difference + and more registers are available. */ + /* ??? could set this to last value of threshold in move_movables */ + int threshold = (loop_has_call ? 1 : 2) * (3 + n_non_fixed_regs); + /* Map of pseudo-register replacements. */ + rtx *reg_map; + int call_seen; + rtx test; + rtx end_insert_before; + + reg_iv_type = (enum iv_mode *) alloca (max_reg_before_loop + * sizeof (enum iv_mode *)); + bzero ((char *) reg_iv_type, max_reg_before_loop * sizeof (enum iv_mode *)); + reg_iv_info = (struct induction **) + alloca (max_reg_before_loop * sizeof (struct induction *)); + bzero ((char *) reg_iv_info, (max_reg_before_loop + * sizeof (struct induction *))); + reg_biv_class = (struct iv_class **) + alloca (max_reg_before_loop * sizeof (struct iv_class *)); + bzero ((char *) reg_biv_class, (max_reg_before_loop + * sizeof (struct iv_class *))); + + loop_iv_list = 0; + addr_placeholder = gen_reg_rtx (Pmode); + + /* Save insn immediately after the loop_end. Insns inserted after loop_end + must be put before this insn, so that they will appear in the right + order (i.e. loop order). */ + + end_insert_before = NEXT_INSN (loop_end); + + /* Scan through loop to find all possible bivs. */ + + p = scan_start; + while (1) + { + p = NEXT_INSN (p); + /* At end of a straight-in loop, we are done. + At end of a loop entered at the bottom, scan the top. */ + if (p == scan_start) + break; + if (p == end) + { + if (loop_top != 0) + p = NEXT_INSN (loop_top); + else + break; + if (p == scan_start) + break; + } + + if (GET_CODE (p) == INSN + && (set = single_set (p)) + && GET_CODE (SET_DEST (set)) == REG) + { + dest_reg = SET_DEST (set); + if (REGNO (dest_reg) < max_reg_before_loop + && REGNO (dest_reg) >= FIRST_PSEUDO_REGISTER + && reg_iv_type[REGNO (dest_reg)] != NOT_BASIC_INDUCT) + { + if (basic_induction_var (SET_SRC (set), dest_reg, + &inc_val, &mult_val)) + { + /* It is a possible basic induction variable. + Create and initialize an induction structure for it. */ + + struct induction *v + = (struct induction *) alloca (sizeof (struct induction)); + + record_biv (v, p, dest_reg, inc_val, mult_val, + not_every_iteration); + reg_iv_type[REGNO (dest_reg)] = BASIC_INDUCT; + } + else if (REGNO (dest_reg) < max_reg_before_loop) + reg_iv_type[REGNO (dest_reg)] = NOT_BASIC_INDUCT; + } + } + + /* Past a label or a jump, we get to insns for which we can't count + on whether or how many times they will be executed during each + iteration. */ + /* This code appears in three places, once in scan_loop, and twice + in strength_reduce. */ + if ((GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN) + /* If we enter the loop in the middle, and scan around to the + beginning, don't set not_every_iteration for that. + This can be any kind of jump, since we want to know if insns + will be executed if the loop is executed. */ + && ! (GET_CODE (p) == JUMP_INSN && JUMP_LABEL (p) == loop_top + && ((NEXT_INSN (NEXT_INSN (p)) == loop_end && simplejump_p (p)) + || (NEXT_INSN (p) == loop_end && condjump_p (p))))) + not_every_iteration = 1; + + /* At the virtual top of a converted loop, insns are again known to + be executed each iteration: logically, the loop begins here + even though the exit code has been duplicated. */ + + else if (GET_CODE (p) == NOTE + && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_VTOP) + not_every_iteration = 0; + + /* Unlike in the code motion pass where MAYBE_NEVER indicates that + an insn may never be executed, NOT_EVERY_ITERATION indicates whether + or not an insn is known to be executed each iteration of the + loop, whether or not any iterations are known to occur. + + Therefore, if we have just passed a label and have no more labels + between here and the test insn of the loop, we know these insns + will be executed each iteration. This can also happen if we + have just passed a jump, for example, when there are nested loops. */ + + if (not_every_iteration && GET_CODE (p) == CODE_LABEL + && no_labels_between_p (p, loop_end)) + not_every_iteration = 0; + } + + /* Scan loop_iv_list to remove all regs that proved not to be bivs. + Make a sanity check against n_times_set. */ + for (backbl = &loop_iv_list, bl = *backbl; bl; bl = bl->next) + { + if (reg_iv_type[bl->regno] != BASIC_INDUCT + /* Above happens if register modified by subreg, etc. */ + /* Make sure it is not recognized as a basic induction var: */ + || n_times_set[bl->regno] != bl->biv_count + /* If never incremented, it is invariant that we decided not to + move. So leave it alone. */ + || ! bl->incremented) + { + if (loop_dump_stream) + fprintf (loop_dump_stream, "Reg %d: biv discarded, %s\n", + bl->regno, + (reg_iv_type[bl->regno] != BASIC_INDUCT + ? "not induction variable" + : (! bl->incremented ? "never incremented" + : "count error"))); + + reg_iv_type[bl->regno] = NOT_BASIC_INDUCT; + *backbl = bl->next; + } + else + { + backbl = &bl->next; + + if (loop_dump_stream) + fprintf (loop_dump_stream, "Reg %d: biv verified\n", bl->regno); + } + } + + /* Exit if there are no bivs. */ + if (! loop_iv_list) + { + /* Can still unroll the loop anyways, but indicate that there is no + strength reduction info available. */ + if (flag_unroll_loops) + unroll_loop (loop_end, insn_count, loop_start, end_insert_before, 0); + + return; + } + + /* Find initial value for each biv by searching backwards from loop_start, + halting at first label. Also record any test condition. */ + + call_seen = 0; + for (p = loop_start; p && GET_CODE (p) != CODE_LABEL; p = PREV_INSN (p)) + { + note_insn = p; + + if (GET_CODE (p) == CALL_INSN) + call_seen = 1; + + if (GET_CODE (p) == INSN || GET_CODE (p) == JUMP_INSN + || GET_CODE (p) == CALL_INSN) + note_stores (PATTERN (p), record_initial); + + /* Record any test of a biv that branches around the loop if no store + between it and the start of loop. We only care about tests with + constants and registers and only certain of those. */ + if (GET_CODE (p) == JUMP_INSN + && JUMP_LABEL (p) != 0 + && next_real_insn (JUMP_LABEL (p)) == next_real_insn (loop_end) + && (test = get_condition_for_loop (p)) != 0 + && GET_CODE (XEXP (test, 0)) == REG + && REGNO (XEXP (test, 0)) < max_reg_before_loop + && (bl = reg_biv_class[REGNO (XEXP (test, 0))]) != 0 + && valid_initial_value_p (XEXP (test, 1), p, call_seen, loop_start) + && bl->init_insn == 0) + { + /* If an NE test, we have an initial value! */ + if (GET_CODE (test) == NE) + { + bl->init_insn = p; + bl->init_set = gen_rtx (SET, VOIDmode, + XEXP (test, 0), XEXP (test, 1)); + } + else + bl->initial_test = test; + } + } + + /* Look at the each biv and see if we can say anything better about its + initial value from any initializing insns set up above. (This is done + in two passes to avoid missing SETs in a PARALLEL.) */ + for (bl = loop_iv_list; bl; bl = bl->next) + { + rtx src; + + if (! bl->init_insn) + continue; + + src = SET_SRC (bl->init_set); + + if (loop_dump_stream) + fprintf (loop_dump_stream, + "Biv %d initialized at insn %d: initial value ", + bl->regno, INSN_UID (bl->init_insn)); + + if (valid_initial_value_p (src, bl->init_insn, call_seen, loop_start)) + { + bl->initial_value = src; + + if (loop_dump_stream) + { + if (GET_CODE (src) == CONST_INT) + fprintf (loop_dump_stream, "%d\n", INTVAL (src)); + else + { + print_rtl (loop_dump_stream, src); + fprintf (loop_dump_stream, "\n"); + } + } + } + else + { + /* Biv initial value is not simple move, + so let it keep intial value of "itself". */ + + if (loop_dump_stream) + fprintf (loop_dump_stream, "is complex\n"); + } + } + + /* Search the loop for general induction variables. */ + + /* A register is a giv if: it is only set once, it is a function of a + biv and a constant (or invariant), and it is not a biv. */ + + not_every_iteration = 0; + p = scan_start; + while (1) + { + p = NEXT_INSN (p); + /* At end of a straight-in loop, we are done. + At end of a loop entered at the bottom, scan the top. */ + if (p == scan_start) + break; + if (p == end) + { + if (loop_top != 0) + p = NEXT_INSN (loop_top); + else + break; + if (p == scan_start) + break; + } + + /* Look for a general induction variable in a register. */ + if (GET_CODE (p) == INSN + && (set = single_set (p)) + && GET_CODE (SET_DEST (set)) == REG + && ! may_not_optimize[REGNO (SET_DEST (set))]) + { + rtx src_reg; + rtx add_val; + rtx mult_val; + int benefit; + rtx regnote = 0; + + dest_reg = SET_DEST (set); + if (REGNO (dest_reg) < FIRST_PSEUDO_REGISTER) + continue; + + if (/* SET_SRC is a giv. */ + ((benefit = general_induction_var (SET_SRC (set), + &src_reg, &add_val, + &mult_val)) + /* Equivalent expression is a giv. */ + || ((regnote = find_reg_note (p, REG_EQUAL, 0)) + && (benefit = general_induction_var (XEXP (regnote, 0), + &src_reg, + &add_val, &mult_val)))) + /* Don't try to handle any regs made by loop optimization. + We have nothing on them in regno_first_uid, etc. */ + && REGNO (dest_reg) < max_reg_before_loop + /* Don't recognize a BASIC_INDUCT_VAR here. */ + && dest_reg != src_reg + /* This must be the only place where the register is set. */ + && (n_times_set[REGNO (dest_reg)] == 1 + /* or all sets must be consecutive and make a giv. */ + || (benefit = consec_sets_giv (benefit, p, + src_reg, dest_reg, + &add_val, &mult_val)))) + { + int count; + struct induction *v + = (struct induction *) alloca (sizeof (struct induction)); + rtx temp; + + /* If this is a library call, increase benefit. */ + if (find_reg_note (p, REG_RETVAL, 0)) + benefit += libcall_benefit (p); + + /* Skip the consecutive insns, if there are any. */ + for (count = n_times_set[REGNO (dest_reg)] - 1; + count > 0; count--) + { + /* If first insn of libcall sequence, skip to end. + Do this at start of loop, since INSN is guaranteed to + be an insn here. */ + if (GET_CODE (p) != NOTE + && (temp = find_reg_note (p, REG_LIBCALL, 0))) + p = XEXP (temp, 0); + + do p = NEXT_INSN (p); + while (GET_CODE (p) == NOTE); + } + + record_giv (v, p, src_reg, dest_reg, mult_val, add_val, benefit, + DEST_REG, not_every_iteration, 0, loop_start, + loop_end); + + } + } + +#ifndef DONT_REDUCE_ADDR + /* Look for givs which are memory addresses. */ + /* This resulted in worse code on a VAX 8600. I wonder if it + still does. */ + if (GET_CODE (p) == INSN) + find_mem_givs (PATTERN (p), p, not_every_iteration, loop_start, + loop_end); +#endif + + /* Update the status of whether giv can derive other givs. This can + change when we pass a label or an insn that updates a biv. */ + if (GET_CODE (p) == INSN || GET_CODE (p) == CODE_LABEL) + update_giv_derive (p); + + /* Past a label or a jump, we get to insns for which we can't count + on whether or how many times they will be executed during each + iteration. */ + /* This code appears in three places, once in scan_loop, and twice + in strength_reduce. */ + if ((GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN) + /* If we enter the loop in the middle, and scan around + to the beginning, don't set not_every_iteration for that. + This can be any kind of jump, since we want to know if insns + will be executed if the loop is executed. */ + && ! (GET_CODE (p) == JUMP_INSN && JUMP_LABEL (p) == loop_top + && ((NEXT_INSN (NEXT_INSN (p)) == loop_end && simplejump_p (p)) + || (NEXT_INSN (p) == loop_end && condjump_p (p))))) + not_every_iteration = 1; + + /* At the virtual top of a converted loop, insns are again known to + be executed each iteration: logically, the loop begins here + even though the exit code has been duplicated. */ + + else if (GET_CODE (p) == NOTE + && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_VTOP) + not_every_iteration = 0; + + /* Unlike in the code motion pass where MAYBE_NEVER indicates that + an insn may never be executed, NOT_EVERY_ITERATION indicates whether + or not an insn is known to be executed each iteration of the + loop, whether or not any iterations are known to occur. + + Therefore, if we have just passed a label and have no more labels + between here and the test insn of the loop, we know these insns + will be executed each iteration. */ + + if (not_every_iteration && GET_CODE (p) == CODE_LABEL + && no_labels_between_p (p, loop_end)) + not_every_iteration = 0; + } + + /* Try to calculate and save the number of loop iterations. This is + set to zero if the actual number can not be calculated. This must + be called after all giv's have been identified, since otherwise it may + fail if the iteration variable is a giv. */ + + loop_n_iterations = loop_iterations (loop_start, loop_end); + + /* Now for each giv for which we still don't know whether or not it is + replaceable, check to see if it is replaceable because its final value + can be calculated. This must be done after loop_iterations is called, + so that final_giv_value will work correctly. */ + + for (bl = loop_iv_list; bl; bl = bl->next) + { + struct induction *v; + + for (v = bl->giv; v; v = v->next_iv) + if (! v->replaceable && ! v->not_replaceable) + check_final_value (v, loop_start, loop_end); + } + + /* Try to prove that the loop counter variable (if any) is always + nonnegative; if so, record that fact with a REG_NONNEG note + so that "decrement and branch until zero" insn can be used. */ + check_dbra_loop (loop_end, insn_count, loop_start); + + /* Create reg_map to hold substitutions for replaceable giv regs. */ + reg_map = (rtx *) alloca (max_reg_before_loop * sizeof (rtx)); + bzero ((char *) reg_map, max_reg_before_loop * sizeof (rtx)); + + /* Examine each iv class for feasibility of strength reduction/induction + variable elimination. */ + + for (bl = loop_iv_list; bl; bl = bl->next) + { + struct induction *v; + int benefit; + int all_reduced; + rtx final_value = 0; + + /* Test whether it will be possible to eliminate this biv + provided all givs are reduced. This is possible if either + the reg is not used outside the loop, or we can compute + what its final value will be. + + For architectures with a decrement_and_branch_until_zero insn, + don't do this if we put a REG_NONNEG note on the endtest for + this biv. */ + + /* Compare against bl->init_insn rather than loop_start. + We aren't concerned with any uses of the biv between + init_insn and loop_start since these won't be affected + by the value of the biv elsewhere in the function, so + long as init_insn doesn't use the biv itself. + March 14, 1989 -- self@bayes.arc.nasa.gov */ + + if ((uid_luid[regno_last_uid[bl->regno]] < INSN_LUID (loop_end) + && bl->init_insn + && INSN_UID (bl->init_insn) < max_uid_for_loop + && uid_luid[regno_first_uid[bl->regno]] >= INSN_LUID (bl->init_insn) +#ifdef HAVE_decrement_and_branch_until_zero + && ! bl->nonneg +#endif + && ! reg_mentioned_p (bl->biv->dest_reg, SET_SRC (bl->init_set))) + || ((final_value = final_biv_value (bl, loop_start, loop_end)) +#ifdef HAVE_decrement_and_branch_until_zero + && ! bl->nonneg +#endif + )) + bl->eliminable = maybe_eliminate_biv (bl, loop_start, end, 0, + threshold, insn_count); + else + { + if (loop_dump_stream) + { + fprintf (loop_dump_stream, + "Cannot eliminate biv %d.\n", + bl->regno); + fprintf (loop_dump_stream, + "First use: insn %d, last use: insn %d.\n", + regno_first_uid[bl->regno], + regno_last_uid[bl->regno]); + } + } + + /* Combine all giv's for this iv_class. */ + combine_givs (bl); + + /* This will be true at the end, if all givs which depend on this + biv have been strength reduced. + We can't (currently) eliminate the biv unless this is so. */ + all_reduced = 1; + + /* Check each giv in this class to see if we will benefit by reducing + it. Skip giv's combined with others. */ + for (v = bl->giv; v; v = v->next_iv) + { + struct induction *tv; + + if (v->ignore || v->same) + continue; + + benefit = v->benefit; + + /* Reduce benefit if not replaceable, since we will insert + a move-insn to replace the insn that calculates this giv. + Don't do this unless the giv is a user variable, since it + will often be marked non-replaceable because of the duplication + of the exit code outside the loop. In such a case, the copies + we insert are dead and will be deleted. So they don't have + a cost. Similar situations exist. */ + /* ??? The new final_[bg]iv_value code does a much better job + of finding replaceable giv's, and hence this code may no longer + be necessary. */ + if (! v->replaceable && ! bl->eliminable + && REG_USERVAR_P (v->dest_reg)) + benefit -= copy_cost; + + /* Decrease the benefit to count the add-insns that we will + insert to increment the reduced reg for the giv. */ + benefit -= add_cost * bl->biv_count; + + /* Decide whether to strength-reduce this giv or to leave the code + unchanged (recompute it from the biv each time it is used). + This decision can be made independently for each giv. */ + + /* ??? Perhaps attempt to guess whether autoincrement will handle + some of the new add insns; if so, can increase BENEFIT + (undo the subtraction of add_cost that was done above). */ + + /* If an insn is not to be strength reduced, then set its ignore + flag, and clear all_reduced. */ + + if (v->lifetime * threshold * benefit < insn_count) + { + if (loop_dump_stream) + fprintf (loop_dump_stream, + "giv of insn %d not worth while, %d vs %d.\n", + INSN_UID (v->insn), + v->lifetime * threshold * benefit, insn_count); + v->ignore = 1; + all_reduced = 0; + } + else + { + /* Check that we can increment the reduced giv without a + multiply insn. If not, reject it. */ + + for (tv = bl->biv; tv; tv = tv->next_iv) + if (tv->mult_val == const1_rtx + && ! product_cheap_p (tv->add_val, v->mult_val)) + { + if (loop_dump_stream) + fprintf (loop_dump_stream, + "giv of insn %d: would need a multiply.\n", + INSN_UID (v->insn)); + v->ignore = 1; + all_reduced = 0; + break; + } + } + } + + /* Reduce each giv that we decided to reduce. */ + + for (v = bl->giv; v; v = v->next_iv) + { + struct induction *tv; + if (! v->ignore && v->same == 0) + { + v->new_reg = gen_reg_rtx (v->mode); + + /* For each place where the biv is incremented, + add an insn to increment the new, reduced reg for the giv. */ + for (tv = bl->biv; tv; tv = tv->next_iv) + { + if (tv->mult_val == const1_rtx) + emit_iv_add_mult (tv->add_val, v->mult_val, + v->new_reg, v->new_reg, tv->insn); + else /* tv->mult_val == const0_rtx */ + /* A multiply is acceptable here + since this is presumed to be seldom executed. */ + emit_iv_add_mult (tv->add_val, v->mult_val, + v->add_val, v->new_reg, tv->insn); + } + + /* Add code at loop start to initialize giv's reduced reg. */ + + emit_iv_add_mult (bl->initial_value, v->mult_val, + v->add_val, v->new_reg, loop_start); + } + } + + /* Rescan all givs. If a giv is the same as a giv not reduced, mark it + as not reduced. + + For each giv register that can be reduced now: if replaceable, + substitute reduced reg wherever the old giv occurs; + else add new move insn "giv_reg = reduced_reg". + + Also check for givs whose first use is their definition and whose + last use is the definition of another giv. If so, it is likely + dead and should not be used to eliminate a biv. */ + for (v = bl->giv; v; v = v->next_iv) + { + if (v->same && v->same->ignore) + v->ignore = 1; + + if (v->ignore) + continue; + + if (v->giv_type == DEST_REG + && regno_first_uid[REGNO (v->dest_reg)] == INSN_UID (v->insn)) + { + struct induction *v1; + + for (v1 = bl->giv; v1; v1 = v1->next_iv) + if (regno_last_uid[REGNO (v->dest_reg)] == INSN_UID (v1->insn)) + v->maybe_dead = 1; + } + + /* Update expression if this was combined, in case other giv was + replaced. */ + if (v->same) + v->new_reg = replace_rtx (v->new_reg, + v->same->dest_reg, v->same->new_reg); + + if (v->giv_type == DEST_ADDR) + /* Store reduced reg as the address in the memref where we found + this giv. */ + *v->location = v->new_reg; + else if (v->replaceable) + { + reg_map[REGNO (v->dest_reg)] = v->new_reg; + +#if 0 + /* I can no longer duplicate the original problem. Perhaps + this is unnecessary now? */ + + /* Replaceable; it isn't strictly necessary to delete the old + insn and emit a new one, because v->dest_reg is now dead. + + However, especially when unrolling loops, the special + handling for (set REG0 REG1) in the second cse pass may + make v->dest_reg live again. To avoid this problem, emit + an insn to set the original giv reg from the reduced giv. + We can not delete the original insn, since it may be part + of a LIBCALL, and the code in flow that eliminates dead + libcalls will fail if it is deleted. */ + emit_insn_after (gen_move_insn (v->dest_reg, v->new_reg), + v->insn); +#endif + } + else + { + /* Not replaceable; emit an insn to set the original giv reg from + the reduced giv, same as above. */ + emit_insn_after (gen_move_insn (v->dest_reg, v->new_reg), + v->insn); + } + + /* When a loop is reversed, givs which depend on the reversed + biv, and which are live outside the loop, must be set to their + correct final value. This insn is only needed if the giv is + not replaceable. The correct final value is the same as the + value that the giv starts the reversed loop with. */ + if (bl->reversed && ! v->replaceable) + emit_iv_add_mult (bl->initial_value, v->mult_val, + v->add_val, v->dest_reg, end_insert_before); + else if (v->final_value) + { + rtx insert_before; + + /* If the loop has multiple exits, emit the insn before the + loop to ensure that it will always be executed no matter + how the loop exits. Otherwise, emit the insn after the loop, + since this is slightly more efficient. */ + if (loop_number_exit_labels[uid_loop_num[INSN_UID (loop_start)]]) + insert_before = loop_start; + else + insert_before = end_insert_before; + emit_insn_before (gen_move_insn (v->dest_reg, v->final_value), + insert_before); + +#if 0 + /* If the insn to set the final value of the giv was emitted + before the loop, then we must delete the insn inside the loop + that sets it. If this is a LIBCALL, then we must delete + every insn in the libcall. Note, however, that + final_giv_value will only succeed when there are multiple + exits if the giv is dead at each exit, hence it does not + matter that the original insn remains because it is dead + anyways. */ + /* Delete the insn inside the loop that sets the giv since + the giv is now set before (or after) the loop. */ + delete_insn (v->insn); +#endif + } + + if (loop_dump_stream) + { + fprintf (loop_dump_stream, "giv at %d reduced to ", + INSN_UID (v->insn)); + print_rtl (loop_dump_stream, v->new_reg); + fprintf (loop_dump_stream, "\n"); + } + } + + /* All the givs based on the biv bl have been reduced if they + merit it. */ + + /* For each giv not marked as maybe dead that has been combined with a + second giv, clear any "maybe dead" mark on that second giv. + v->new_reg will either be or refer to the register of the giv it + combined with. + + Doing this clearing avoids problems in biv elimination where a + giv's new_reg is a complex value that can't be put in the insn but + the giv combined with (with a reg as new_reg) is marked maybe_dead. + Since the register will be used in either case, we'd prefer it be + used from the simpler giv. */ + + for (v = bl->giv; v; v = v->next_iv) + if (! v->maybe_dead && v->same) + v->same->maybe_dead = 0; + + /* Try to eliminate the biv, if it is a candidate. + This won't work if ! all_reduced, + since the givs we planned to use might not have been reduced. + + We have to be careful that we didn't initially think we could elminate + this biv because of a giv that we now think may be dead and shouldn't + be used as a biv replacement. + + Also, there is the possibility that we may have a giv that looks + like it can be used to eliminate a biv, but the resulting insn + isn't valid. This can happen, for example, on the 88k, where a + JUMP_INSN can compare a register only with zero. Attempts to + replace it with a comapare with a constant will fail. + + Note that in cases where this call fails, we may have replaced some + of the occurrences of the biv with a giv, but no harm was done in + doing so in the rare cases where it can occur. */ + + if (all_reduced == 1 && bl->eliminable + && maybe_eliminate_biv (bl, loop_start, end, 1, + threshold, insn_count)) + + { + /* ?? If we created a new test to bypass the loop entirely, + or otherwise drop straight in, based on this test, then + we might want to rewrite it also. This way some later + pass has more hope of removing the initialization of this + biv entirely. */ + + /* If final_value != 0, then the biv may be used after loop end + and we must emit an insn to set it just in case. + + Reversed bivs already have an insn after the loop setting their + value, so we don't need another one. We can't calculate the + proper final value for such a biv here anyways. */ + if (final_value != 0 && ! bl->reversed) + { + rtx insert_before; + + /* If the loop has multiple exits, emit the insn before the + loop to ensure that it will always be executed no matter + how the loop exits. Otherwise, emit the insn after the + loop, since this is slightly more efficient. */ + if (loop_number_exit_labels[uid_loop_num[INSN_UID (loop_start)]]) + insert_before = loop_start; + else + insert_before = end_insert_before; + + emit_insn_before (gen_move_insn (bl->biv->dest_reg, final_value), + end_insert_before); + } + +#if 0 + /* Delete all of the instructions inside the loop which set + the biv, as they are all dead. If is safe to delete them, + because an insn setting a biv will never be part of a libcall. */ + /* However, deleting them will invalidate the regno_last_uid info, + so keeping them around is more convenient. Final_biv_value + will only succeed when there are multiple exits if the biv + is dead at each exit, hence it does not matter that the original + insn remains, because it is dead anyways. */ + for (v = bl->biv; v; v = v->next_iv) + delete_insn (v->insn); +#endif + + if (loop_dump_stream) + fprintf (loop_dump_stream, "Reg %d: biv eliminated\n", + bl->regno); + } + } + + /* Go through all the instructions in the loop, making all the + register substitutions scheduled in REG_MAP. */ + + for (p = loop_start; p != end; p = NEXT_INSN (p)) + if (GET_CODE (p) == INSN || GET_CODE (p) == JUMP_INSN + || GET_CODE (p) == CALL_INSN) + { + replace_regs (PATTERN (p), reg_map, max_reg_before_loop, 0); + replace_regs (REG_NOTES (p), reg_map, max_reg_before_loop, 0); + } + + /* Unroll loops from within strength reduction so that we can use the + induction variable information that strength_reduce has already + collected. */ + + if (flag_unroll_loops) + unroll_loop (loop_end, insn_count, loop_start, end_insert_before, 1); + + if (loop_dump_stream) + fprintf (loop_dump_stream, "\n"); +} + +/* Return 1 if X is a valid source for an initial value (or as value being + compared against in an initial test). + + X must be either a register or constant and must not be clobbered between + the current insn and the start of the loop. + + INSN is the insn containing X. */ + +static int +valid_initial_value_p (x, insn, call_seen, loop_start) + rtx x; + rtx insn; + int call_seen; + rtx loop_start; +{ + if (CONSTANT_P (x)) + return 1; + + /* Only consider psuedos we know about initialized in insns whose luids + we know. */ + if (GET_CODE (x) != REG + || REGNO (x) >= max_reg_before_loop) + return 0; + + /* Don't use call-clobbered registers across a call which clobbers it. On + some machines, don't use any hard registers at all. */ + if (REGNO (x) < FIRST_PSEUDO_REGISTER +#ifndef SMALL_REGISTER_CLASSES + && call_used_regs[REGNO (x)] && call_seen +#endif + ) + return 0; + + /* Don't use registers that have been clobbered before the start of the + loop. */ + if (reg_set_between_p (x, insn, loop_start)) + return 0; + + return 1; +} + +/* Scan X for memory refs and check each memory address + as a possible giv. INSN is the insn whose pattern X comes from. + NOT_EVERY_ITERATION is 1 if the insn might not be executed during + every loop iteration. */ + +static void +find_mem_givs (x, insn, not_every_iteration, loop_start, loop_end) + rtx x; + rtx insn; + int not_every_iteration; + rtx loop_start, loop_end; +{ + register int i, j; + register enum rtx_code code; + register char *fmt; + + if (x == 0) + return; + + code = GET_CODE (x); + switch (code) + { + case REG: + case CONST_INT: + case CONST: + case CONST_DOUBLE: + case SYMBOL_REF: + case LABEL_REF: + case PC: + case CC0: + case ADDR_VEC: + case ADDR_DIFF_VEC: + case USE: + case CLOBBER: + return; + + case MEM: + { + rtx src_reg; + rtx add_val; + rtx mult_val; + int benefit; + + benefit = general_induction_var (XEXP (x, 0), + &src_reg, &add_val, &mult_val); + + /* Don't make a DEST_ADDR giv with mult_val == 1 && add_val == 0. + Such a giv isn't useful. */ + if (benefit > 0 && (mult_val != const1_rtx || add_val != const0_rtx)) + { + /* Found one; record it. */ + struct induction *v + = (struct induction *) oballoc (sizeof (struct induction)); + + record_giv (v, insn, src_reg, addr_placeholder, mult_val, + add_val, benefit, DEST_ADDR, not_every_iteration, + &XEXP (x, 0), loop_start, loop_end); + + v->mem_mode = GET_MODE (x); + } + return; + } + } + + /* Recursively scan the subexpressions for other mem refs. */ + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + if (fmt[i] == 'e') + find_mem_givs (XEXP (x, i), insn, not_every_iteration, loop_start, + loop_end); + else if (fmt[i] == 'E') + for (j = 0; j < XVECLEN (x, i); j++) + find_mem_givs (XVECEXP (x, i, j), insn, not_every_iteration, + loop_start, loop_end); +} + +/* Fill in the data about one biv update. + V is the `struct induction' in which we record the biv. (It is + allocated by the caller, with alloca.) + INSN is the insn that sets it. + DEST_REG is the biv's reg. + + MULT_VAL is const1_rtx if the biv is being incremented here, in which case + INC_VAL is the increment. Otherwise, MULT_VAL is const0_rtx and the biv is + being set to INC_VAL. */ + +static void +record_biv (v, insn, dest_reg, inc_val, mult_val, not_every_iteration) + struct induction *v; + rtx insn; + rtx dest_reg; + rtx inc_val; + rtx mult_val; + int not_every_iteration; +{ + struct iv_class *bl; + + v->insn = insn; + v->src_reg = dest_reg; + v->dest_reg = dest_reg; + v->mult_val = mult_val; + v->add_val = inc_val; + v->mode = GET_MODE (dest_reg); + v->always_computable = ! not_every_iteration; + + /* Add this to the reg's iv_class, creating a class + if this is the first incrementation of the reg. */ + + bl = reg_biv_class[REGNO (dest_reg)]; + if (bl == 0) + { + /* Create and initialize new iv_class. */ + + bl = (struct iv_class *) oballoc (sizeof (struct iv_class)); + + bl->regno = REGNO (dest_reg); + bl->biv = 0; + bl->giv = 0; + bl->biv_count = 0; + bl->giv_count = 0; + + /* Set initial value to the reg itself. */ + bl->initial_value = dest_reg; + /* We haven't seen the intializing insn yet */ + bl->init_insn = 0; + bl->init_set = 0; + bl->initial_test = 0; + bl->incremented = 0; + bl->eliminable = 0; + bl->nonneg = 0; + bl->reversed = 0; + + /* Add this class to loop_iv_list. */ + bl->next = loop_iv_list; + loop_iv_list = bl; + + /* Put it in the array of biv register classes. */ + reg_biv_class[REGNO (dest_reg)] = bl; + } + + /* Update IV_CLASS entry for this biv. */ + v->next_iv = bl->biv; + bl->biv = v; + bl->biv_count++; + if (mult_val == const1_rtx) + bl->incremented = 1; + + if (loop_dump_stream) + { + fprintf (loop_dump_stream, + "Insn %d: possible biv, reg %d,", + INSN_UID (insn), REGNO (dest_reg)); + if (GET_CODE (inc_val) == CONST_INT) + fprintf (loop_dump_stream, " const = %d\n", + INTVAL (inc_val)); + else + { + fprintf (loop_dump_stream, " const = "); + print_rtl (loop_dump_stream, inc_val); + fprintf (loop_dump_stream, "\n"); + } + } +} + +/* Fill in the data about one giv. + V is the `struct induction' in which we record the giv. (It is + allocated by the caller, with alloca.) + INSN is the insn that sets it. + BENEFIT estimates the savings from deleting this insn. + TYPE is DEST_REG or DEST_ADDR; it says whether the giv is computed + into a register or is used as a memory address. + + SRC_REG is the biv reg which the giv is computed from. + DEST_REG is the giv's reg (if the giv is stored in a reg). + MULT_VAL and ADD_VAL are the coefficients used to compute the giv. + LOCATION points to the place where this giv's value appears in INSN. */ + +static void +record_giv (v, insn, src_reg, dest_reg, mult_val, add_val, benefit, + type, not_every_iteration, location, loop_start, loop_end) + struct induction *v; + rtx insn; + rtx src_reg; + rtx dest_reg; + rtx mult_val, add_val; + int benefit; + enum g_types type; + int not_every_iteration; + rtx *location; + rtx loop_start, loop_end; +{ + struct induction *b; + struct iv_class *bl; + rtx set = single_set (insn); + rtx p; + + v->insn = insn; + v->src_reg = src_reg; + v->giv_type = type; + v->dest_reg = dest_reg; + v->mult_val = mult_val; + v->add_val = add_val; + v->benefit = benefit; + v->location = location; + v->cant_derive = 0; + v->combined_with = 0; + v->maybe_dead = 0; + v->derive_adjustment = 0; + v->same = 0; + v->ignore = 0; + v->new_reg = 0; + v->final_value = 0; + + /* The v->always_computable field is used in update_giv_derive, to + determine whether a giv can be used to derive another giv. For a + DEST_REG giv, INSN computes a new value for the giv, so its value + isn't computable if INSN insn't executed every iteration. + However, for a DEST_ADDR giv, INSN merely uses the value of the giv; + it does not compute a new value. Hence the value is always computable + irregardless of whether INSN is executed each iteration. */ + + if (type == DEST_ADDR) + v->always_computable = 1; + else + v->always_computable = ! not_every_iteration; + + if (type == DEST_ADDR) + { + v->mode = GET_MODE (*location); + v->lifetime = 1; + v->times_used = 1; + } + else /* type == DEST_REG */ + { + v->mode = GET_MODE (SET_DEST (set)); + + v->lifetime = (uid_luid[regno_last_uid[REGNO (dest_reg)]] + - uid_luid[regno_first_uid[REGNO (dest_reg)]]); + + v->times_used = n_times_used[REGNO (dest_reg)]; + + /* If the lifetime is zero, it means that this register is + really a dead store. So mark this as a giv that can be + ignored. This will not prevent the biv from being eliminated. */ + if (v->lifetime == 0) + v->ignore = 1; + + reg_iv_type[REGNO (dest_reg)] = GENERAL_INDUCT; + reg_iv_info[REGNO (dest_reg)] = v; + } + + /* Add the giv to the class of givs computed from one biv. */ + + bl = reg_biv_class[REGNO (src_reg)]; + if (bl) + { + v->next_iv = bl->giv; + bl->giv = v; + /* Don't count DEST_ADDR. This is supposed to count the number of + insns that calculate givs. */ + if (type == DEST_REG) + bl->giv_count++; + bl->total_benefit += benefit; + } + else + /* Fatal error, biv missing for this giv? */ + abort (); + + if (type == DEST_ADDR) + v->replaceable = 1; + else + { + /* The giv can be replaced outright by the reduced register only if all + of the following conditions are true: + - the insn that sets the giv is always executed on any iteration + on which the giv is used at all + (there are two ways to deduce this: + either the insn is executed on every iteration, + or all uses follow that insn in the same basic block), + - the giv is not used outside the loop + - no assignments to the biv occur during the giv's lifetime. */ + + if (regno_first_uid[REGNO (dest_reg)] == INSN_UID (insn) + /* Previous line always fails if INSN was moved by loop opt. */ + && uid_luid[regno_last_uid[REGNO (dest_reg)]] < INSN_LUID (loop_end) + && (! not_every_iteration + || last_use_this_basic_block (dest_reg, insn))) + { + /* Now check that there are no assignments to the biv within the + giv's lifetime. This requires two separate checks. */ + + /* Check each biv update, and fail if any are between the first + and last use of the giv. + + If this loop contains an inner loop that was unrolled, then + the insn modifying the biv may have been emitted by the loop + unrolling code, and hence does not have a valid luid. Just + mark the biv as not replaceable in this case. It is not very + useful as a biv, because it is used in two different loops. + It is very unlikely that we would be able to optimize the giv + using this biv anyways. */ + + v->replaceable = 1; + for (b = bl->biv; b; b = b->next_iv) + { + if (INSN_UID (b->insn) >= max_uid_for_loop + || ((uid_luid[INSN_UID (b->insn)] + >= uid_luid[regno_first_uid[REGNO (dest_reg)]]) + && (uid_luid[INSN_UID (b->insn)] + <= uid_luid[regno_last_uid[REGNO (dest_reg)]]))) + { + v->replaceable = 0; + v->not_replaceable = 1; + break; + } + } + + /* Check each insn between the first and last use of the giv, + and fail if any of them are branches that jump to a named label + outside this range, but still inside the loop. This catches + cases of spaghetti code where the execution order of insns + is not linear, and hence the above test fails. For example, + in the following code, j is not replaceable: + for (i = 0; i < 100; ) { + L0: j = 4*i; goto L1; + L2: k = j; goto L3; + L1: i++; goto L2; + L3: ; } + printf ("k = %d\n", k); } + This test is conservative, but this test succeeds rarely enough + that it isn't a problem. See also check_final_value below. */ + + if (v->replaceable) + for (p = insn; + INSN_UID (p) >= max_uid_for_loop + || INSN_LUID (p) < uid_luid[regno_last_uid[REGNO (dest_reg)]]; + p = NEXT_INSN (p)) + { + if (GET_CODE (p) == JUMP_INSN && JUMP_LABEL (p) + && LABEL_NAME (JUMP_LABEL (p)) + && ((INSN_LUID (JUMP_LABEL (p)) > INSN_LUID (loop_start) + && (INSN_LUID (JUMP_LABEL (p)) + < uid_luid[regno_first_uid[REGNO (dest_reg)]])) + || (INSN_LUID (JUMP_LABEL (p)) < INSN_LUID (loop_end) + && (INSN_LUID (JUMP_LABEL (p)) + > uid_luid[regno_last_uid[REGNO (dest_reg)]])))) + { + v->replaceable = 0; + v->not_replaceable = 1; + + if (loop_dump_stream) + fprintf (loop_dump_stream, + "Found branch outside giv lifetime.\n"); + + break; + } + } + } + else + { + /* May still be replaceable, we don't have enough info here to + decide. */ + v->replaceable = 0; + v->not_replaceable = 0; + } + } + + if (loop_dump_stream) + { + if (type == DEST_REG) + fprintf (loop_dump_stream, "Insn %d: giv reg %d", + INSN_UID (insn), REGNO (dest_reg)); + else + fprintf (loop_dump_stream, "Insn %d: dest address", + INSN_UID (insn)); + + fprintf (loop_dump_stream, " src reg %d benefit %d", + REGNO (src_reg), v->benefit); + fprintf (loop_dump_stream, " used %d lifetime %d", + v->times_used, v->lifetime); + + if (v->replaceable) + fprintf (loop_dump_stream, " replaceable"); + + if (GET_CODE (mult_val) == CONST_INT) + fprintf (loop_dump_stream, " mult %d", + INTVAL (mult_val)); + else + { + fprintf (loop_dump_stream, " mult "); + print_rtl (loop_dump_stream, mult_val); + } + + if (GET_CODE (add_val) == CONST_INT) + fprintf (loop_dump_stream, " add %d", + INTVAL (add_val)); + else + { + fprintf (loop_dump_stream, " add "); + print_rtl (loop_dump_stream, add_val); + } + } + + if (loop_dump_stream) + fprintf (loop_dump_stream, "\n"); + +} + + +/* All this does is determine whether a giv can be made replaceable because + its final value can be calculated. This code can not be part of record_giv + above, because final_giv_value requires that the number of loop iterations + be known, and that can not be accurately calculated until after all givs + have been identified. */ + +static void +check_final_value (v, loop_start, loop_end) + struct induction *v; + rtx loop_start, loop_end; +{ + struct iv_class *bl; + rtx final_value = 0; + rtx tem; + + bl = reg_biv_class[REGNO (v->src_reg)]; + + /* DEST_ADDR givs will never reach here, because they are always marked + replaceable above in record_giv. */ + + /* The giv can be replaced outright by the reduced register only if all + of the following conditions are true: + - the insn that sets the giv is always executed on any iteration + on which the giv is used at all + (there are two ways to deduce this: + either the insn is executed on every iteration, + or all uses follow that insn in the same basic block), + - its final value can be calculated (this condition is different + than the one above in record_giv) + - no assignments to the biv occur during the giv's lifetime. */ + +#if 0 + /* This is only called now when replaceable is known to be false. */ + /* Clear replaceable, so that it won't confuse final_giv_value. */ + v->replaceable = 0; +#endif + + if ((final_value = final_giv_value (v, loop_start, loop_end)) + && (v->always_computable || last_use_this_basic_block (v->dest_reg, v->insn))) + { + int biv_increment_seen = 0; + rtx p = v->insn; + rtx last_giv_use; + + v->replaceable = 1; + + /* When trying to determine whether or not a biv increment occurs + during the lifetime of the giv, we can ignore uses of the variable + outside the loop because final_value is true. Hence we can not + use regno_last_uid and regno_first_uid as above in record_giv. */ + + /* Search the loop to determine whether any assignments to the + biv occur during the giv's lifetime. Start with the insn + that sets the giv, and search around the loop until we come + back to that insn again. + + Also fail if there is a jump within the giv's lifetime that jumps + to somewhere outside the lifetime but still within the loop. This + catches spaghetti code where the execution order is not linear, and + hence the above test fails. Here we assume that the giv lifetime + does not extend from one iteration of the loop to the next, so as + to make the test easier. Since the lifetime isn't known yet, + this requires two loops. See also record_giv above. */ + + last_giv_use = v->insn; + + while (1) + { + p = NEXT_INSN (p); + if (p == loop_end) + p = NEXT_INSN (loop_start); + if (p == v->insn) + break; + + if (GET_CODE (p) == INSN || GET_CODE (p) == JUMP_INSN + || GET_CODE (p) == CALL_INSN) + { + if (biv_increment_seen) + { + if (reg_mentioned_p (v->dest_reg, PATTERN (p))) + { + v->replaceable = 0; + v->not_replaceable = 1; + break; + } + } + else if (GET_CODE (PATTERN (p)) == SET + && SET_DEST (PATTERN (p)) == v->src_reg) + biv_increment_seen = 1; + else if (reg_mentioned_p (v->dest_reg, PATTERN (p))) + last_giv_use = p; + } + } + + /* Now that the lifetime of the giv is known, check for branches + from within the lifetime to outside the lifetime if it is still + replaceable. */ + + if (v->replaceable) + { + p = v->insn; + while (1) + { + p = NEXT_INSN (p); + if (p == loop_end) + p = NEXT_INSN (loop_start); + if (p == last_giv_use) + break; + + if (GET_CODE (p) == JUMP_INSN && JUMP_LABEL (p) + && LABEL_NAME (JUMP_LABEL (p)) + && ((INSN_LUID (JUMP_LABEL (p)) < INSN_LUID (v->insn) + && INSN_LUID (JUMP_LABEL (p)) > INSN_LUID (loop_start)) + || (INSN_LUID (JUMP_LABEL (p)) > INSN_LUID (last_giv_use) + && INSN_LUID (JUMP_LABEL (p)) < INSN_LUID (loop_end)))) + { + v->replaceable = 0; + v->not_replaceable = 1; + + if (loop_dump_stream) + fprintf (loop_dump_stream, + "Found branch outside giv lifetime.\n"); + + break; + } + } + } + + /* If it is replaceable, then save the final value. */ + if (v->replaceable) + v->final_value = final_value; + } + + if (loop_dump_stream && v->replaceable) + fprintf (loop_dump_stream, "Insn %d: giv reg %d final_value replaceable\n", + INSN_UID (v->insn), REGNO (v->dest_reg)); +} + +/* Update the status of whether a giv can derive other givs. + + We need to do something special if there is or may be an update to the biv + between the time the giv is defined and the time it is used to derive + another giv. + + In addition, a giv that is only conditionally set is not allowed to + derive another giv once a label has been passed. + + The cases we look at are when a label or an update to a biv is passed. */ + +static void +update_giv_derive (p) + rtx p; +{ + struct iv_class *bl; + struct induction *biv, *giv; + rtx tem; + int dummy; + + /* Search all IV classes, then all bivs, and finally all givs. + + There are two cases we are concerned with. First we have the situation + of a giv that is only updated conditionally. In that case, it may not + derive any givs after a label is passed. + + The second case is when a biv update occurs, or may occur, after the + definition of a giv. For certain biv updates (see below) that are + known to occur between the giv definition and use, we can adjust the + giv definition. For others, or when the biv update is conditional, + we must prevent the giv from deriving any other givs. There are two + sub-cases within this case. + + If this is a label, we are concerned with any biv update that is done + conditionally, since it may be done after the giv is defined followed by + a branch here (actually, we need to pass both a jump and a label, but + this extra tracking doesn't seem worth it). + + If this is a giv update, we must adjust the giv status to show that a + subsequent biv update was performed. If this adjustment cannot be done, + the giv cannot derive further givs. */ + + for (bl = loop_iv_list; bl; bl = bl->next) + for (biv = bl->biv; biv; biv = biv->next_iv) + if (GET_CODE (p) == CODE_LABEL || biv->insn == p) + { + for (giv = bl->giv; giv; giv = giv->next_iv) + { + /* If cant_derive is already true, there is no point in + checking all of these conditions again. */ + if (giv->cant_derive) + continue; + + /* If this giv is conditionally set and we have passed a label, + it cannot derive anything. */ + if (GET_CODE (p) == CODE_LABEL && ! giv->always_computable) + giv->cant_derive = 1; + + /* Skip givs that have mult_val == 0, since + they are really invariants. Also skip those that are + replaceable, since we know their lifetime doesn't contain + any biv update. */ + else if (giv->mult_val == const0_rtx || giv->replaceable) + continue; + + /* The only way we can allow this giv to derive another + is if this is a biv increment and we can form the product + of biv->add_val and giv->mult_val. In this case, we will + be able to compute a compensation. */ + else if (biv->insn == p) + { + if (biv->mult_val == const1_rtx + && (tem = simplify_giv_expr (gen_rtx (MULT, giv->mode, + biv->add_val, + giv->mult_val), + &dummy))) + giv->derive_adjustment = tem; + else + giv->cant_derive = 1; + } + else if (GET_CODE (p) == CODE_LABEL && ! biv->always_computable) + giv->cant_derive = 1; + } + } +} + +/* Check whether an insn is an increment legitimate for a basic induction var. + X is the source of the insn. + DEST_REG is the putative biv, also the destination of the insn. + We accept patterns of these forms: + REG = REG + INVARIANT + REG = INVARIANT + REG + REG = REG - CONSTANT + + If X is suitable, we return 1, set *MULT_VAL to CONST1_RTX, + and store the additive term into *INC_VAL. + + If X is an assignment of an invariant into DEST_REG, we set + *MULT_VAL to CONST0_RTX, and store the invariant into *INC_VAL. + + Otherwise we return 0. */ + +static int +basic_induction_var (x, dest_reg, inc_val, mult_val) + register rtx x; + rtx dest_reg; + rtx *inc_val; + rtx *mult_val; +{ + register enum rtx_code code; + rtx arg; + + code = GET_CODE (x); + switch (code) + { + case PLUS: + if (XEXP (x, 0) == dest_reg) + arg = XEXP (x, 1); + else if (XEXP (x, 1) == dest_reg) + arg = XEXP (x, 0); + else + return 0; + + if (invariant_p (arg) != 1) + return 0; + + *inc_val = arg; + *mult_val = const1_rtx; + return 1; + + case MINUS: + if (XEXP (x, 0) == dest_reg + && GET_CODE (XEXP (x, 1)) == CONST_INT) + *inc_val = gen_rtx (CONST_INT, VOIDmode, + - INTVAL (XEXP (x, 1))); + else + return 0; + + *mult_val = const1_rtx; + return 1; + + /* Can accept constant setting of biv only when inside inner most loop. + Otherwise, a biv of an inner loop may be incorrectly recognized + as a biv of the outer loop, + causing code to be moved INTO the inner loop. */ + case MEM: + case REG: + if (invariant_p (x) != 1) + return 0; + case CONST_INT: + case SYMBOL_REF: + case CONST: + if (loops_enclosed == 1) + { + *inc_val = x; + *mult_val = const0_rtx; + return 1; + } + else + return 0; + + default: + return 0; + } +} + +/* A general induction variable (giv) is any quantity that is a linear + function of a basic induction variable, + i.e. giv = biv * mult_val + add_val. + The coefficients can be any loop invariant quantity. + A giv need not be computed directly from the biv; + it can be computed by way of other givs. */ + +/* Determine whether X computes a giv. + If it does, return a nonzero value + which is the benefit from eliminating the computation of X; + set *SRC_REG to the register of the biv that it is computed from; + set *ADD_VAL and *MULT_VAL to the coefficients, + such that the value of X is biv * mult + add; */ + +static int +general_induction_var (x, src_reg, add_val, mult_val) + rtx x; + rtx *src_reg; + rtx *add_val; + rtx *mult_val; +{ + rtx orig_x = x; + int benefit = 0; + char *storage; + + /* If this is an invariant, forget it, it isn't a giv. */ + if (invariant_p (x) == 1) + return 0; + + /* See if the expression could be a giv and get its form. + Mark our place on the obstack in case we don't find a giv. */ + storage = (char *) oballoc (0); + x = simplify_giv_expr (x, &benefit); + if (x == 0) + { + obfree (storage); + return 0; + } + + switch (GET_CODE (x)) + { + case USE: + case CONST_INT: + /* Since this is now an invariant and wasn't before, it must be a giv + with MULT_VAL == 0. It doesn't matter which BIV we associate this + with. */ + *src_reg = loop_iv_list->biv->dest_reg; + *mult_val = const0_rtx; + *add_val = x; + break; + + case REG: + /* This is equivalent to a BIV. */ + *src_reg = x; + *mult_val = const1_rtx; + *add_val = const0_rtx; + break; + + case PLUS: + /* Either (plus (biv) (invar)) or + (plus (mult (biv) (invar_1)) (invar_2)). */ + if (GET_CODE (XEXP (x, 0)) == MULT) + { + *src_reg = XEXP (XEXP (x, 0), 0); + *mult_val = XEXP (XEXP (x, 0), 1); + } + else + { + *src_reg = XEXP (x, 0); + *mult_val = const1_rtx; + } + *add_val = XEXP (x, 1); + break; + + case MULT: + /* ADD_VAL is zero. */ + *src_reg = XEXP (x, 0); + *mult_val = XEXP (x, 1); + *add_val = const0_rtx; + break; + + default: + abort (); + } + + /* Remove any enclosing USE from ADD_VAL and MULT_VAL (there will be + unless they are CONST_INT). */ + if (GET_CODE (*add_val) == USE) + *add_val = XEXP (*add_val, 0); + if (GET_CODE (*mult_val) == USE) + *mult_val = XEXP (*mult_val, 0); + + benefit += rtx_cost (orig_x); + + /* Always return some benefit if this is a giv so it will be detected + as such. This allows elimination of bivs that might otherwise + not be eliminated. */ + return benefit == 0 ? 1 : benefit; +} + +/* Given an expression, X, try to form it as a linear function of a biv. + We will canonicalize it to be of the form + (plus (mult (BIV) (invar_1)) + (invar_2)) + with possibile degeneracies. + + The invariant expressions must each be of a form that can be used as a + machine operand. We surround then with a USE rtx (a hack, but localized + and certainly unambiguous!) if not a CONST_INT for simplicity in this + routine; it is the caller's responsibility to strip them. + + If no such canonicalization is possible (i.e., two biv's are used or an + expression that is neither invariant nor a biv or giv), this routine + returns 0. + + For a non-zero return, the result will have a code of CONST_INT, USE, + REG (for a BIV), PLUS, or MULT. No other codes will occur. + + *BENEFIT will be incremented by the benefit of any sub-giv encountered. */ + +static rtx +simplify_giv_expr (x, benefit) + rtx x; + int *benefit; +{ + enum machine_mode mode = GET_MODE (x); + rtx arg0, arg1; + rtx tem; + + /* If this is not an integer mode, or if we cannot do arithmetic in this + mode, this can't be a giv. */ + if (mode != VOIDmode + && (GET_MODE_CLASS (mode) != MODE_INT + || GET_MODE_BITSIZE (mode) > HOST_BITS_PER_INT)) + return 0; + + switch (GET_CODE (x)) + { + case PLUS: + arg0 = simplify_giv_expr (XEXP (x, 0), benefit); + arg1 = simplify_giv_expr (XEXP (x, 1), benefit); + if (arg0 == 0 || arg1 == 0) + return 0; + + /* Put constant last, CONST_INT last if both constant. */ + if ((GET_CODE (arg0) == USE + || GET_CODE (arg0) == CONST_INT) + && GET_CODE (arg1) != CONST_INT) + tem = arg0, arg0 = arg1, arg1 = tem; + + /* Handle addition of zero, then addition of an invariant. */ + if (arg1 == const0_rtx) + return arg0; + else if (GET_CODE (arg1) == CONST_INT || GET_CODE (arg1) == USE) + switch (GET_CODE (arg0)) + { + case CONST_INT: + case USE: + /* Both invariant. Only valid if sum is machine operand. + First strip off possible USE on first operand. */ + if (GET_CODE (arg0) == USE) + arg0 = XEXP (arg0, 0); + + tem = 0; + if (CONSTANT_P (arg0) && GET_CODE (arg1) == CONST_INT) + { + tem = plus_constant (arg0, INTVAL (arg1)); + if (GET_CODE (tem) != CONST_INT) + tem = gen_rtx (USE, mode, tem); + } + + return tem; + + case REG: + case MULT: + /* biv + invar or mult + invar. Return sum. */ + return gen_rtx (PLUS, mode, arg0, arg1); + + case PLUS: + /* (a + invar_1) + invar_2. Associate. */ + return simplify_giv_expr (gen_rtx (PLUS, mode, + XEXP (arg0, 0), + gen_rtx (PLUS, mode, + XEXP (arg0, 1), arg1)), + benefit); + + default: + abort (); + } + + /* Each argument must be either REG, PLUS, or MULT. Convert REG to + MULT to reduce cases. */ + if (GET_CODE (arg0) == REG) + arg0 = gen_rtx (MULT, mode, arg0, const1_rtx); + if (GET_CODE (arg1) == REG) + arg1 = gen_rtx (MULT, mode, arg1, const1_rtx); + + /* Now have PLUS + PLUS, PLUS + MULT, MULT + PLUS, or MULT + MULT. + Put a MULT first, leaving PLUS + PLUS, MULT + PLUS, or MULT + MULT. + Recurse to associate the second PLUS. */ + if (GET_CODE (arg1) == MULT) + tem = arg0, arg0 = arg1, arg1 = tem; + + if (GET_CODE (arg1) == PLUS) + return simplify_giv_expr (gen_rtx (PLUS, mode, + gen_rtx (PLUS, mode, + arg0, XEXP (arg1, 0)), + XEXP (arg1, 1)), + benefit); + + /* Now must have MULT + MULT. Distribute if same biv, else not giv. */ + if (GET_CODE (arg0) != MULT || GET_CODE (arg1) != MULT) + abort (); + + if (XEXP (arg0, 0) != XEXP (arg1, 0)) + return 0; + + return simplify_giv_expr (gen_rtx (MULT, mode, + XEXP (arg0, 0), + gen_rtx (PLUS, mode, + XEXP (arg0, 1), + XEXP (arg1, 1))), + benefit); + + case MINUS: + /* Handle "a - b" as "a + b * (-1)". */ + return simplify_giv_expr (gen_rtx (PLUS, mode, + XEXP (x, 0), + gen_rtx (MULT, mode, + XEXP (x, 1), + gen_rtx (CONST_INT, + VOIDmode, -1))), + benefit); + + case MULT: + arg0 = simplify_giv_expr (XEXP (x, 0), benefit); + arg1 = simplify_giv_expr (XEXP (x, 1), benefit); + if (arg0 == 0 || arg1 == 0) + return 0; + + /* Put constant last, CONST_INT last if both constant. */ + if ((GET_CODE (arg0) == USE || GET_CODE (arg0) == CONST_INT) + && GET_CODE (arg1) != CONST_INT) + tem = arg0, arg0 = arg1, arg1 = tem; + + /* If second argument is not now constant, not giv. */ + if (GET_CODE (arg1) != USE && GET_CODE (arg1) != CONST_INT) + return 0; + + /* Handle multiply by 0 or 1. */ + if (arg1 == const0_rtx) + return const0_rtx; + + else if (arg1 == const1_rtx) + return arg0; + + switch (GET_CODE (arg0)) + { + case REG: + /* biv * invar. Done. */ + return gen_rtx (MULT, mode, arg0, arg1); + + case CONST_INT: + /* Product of two constants. */ + return gen_rtx (CONST_INT, mode, INTVAL (arg0) * INTVAL (arg1)); + + case USE: + /* invar * invar. Not giv. */ + return 0; + + case MULT: + /* (a * invar_1) * invar_2. Associate. */ + return simplify_giv_expr (gen_rtx (MULT, mode, + XEXP (arg0, 0), + gen_rtx (MULT, mode, + XEXP (arg0, 1), arg1)), + benefit); + + case PLUS: + /* (a + invar_1) * invar_2. Distribute. */ + return simplify_giv_expr (gen_rtx (PLUS, mode, + gen_rtx (MULT, mode, + XEXP (arg0, 0), arg1), + gen_rtx (MULT, mode, + XEXP (arg0, 1), arg1)), + benefit); + + default: + abort (); + } + + case ASHIFT: + case LSHIFT: + /* Shift by constant is multiply by power of two. */ + if (GET_CODE (XEXP (x, 1)) != CONST_INT) + return 0; + + return simplify_giv_expr (gen_rtx (MULT, mode, + XEXP (x, 0), + gen_rtx (CONST_INT, VOIDmode, + 1 << INTVAL (XEXP (x, 1)))), + benefit); + + case NEG: + /* "-a" is "a * (-1)" */ + return simplify_giv_expr (gen_rtx (MULT, mode, + XEXP (x, 0), + gen_rtx (CONST_INT, VOIDmode, -1)), + benefit); + + case NOT: + /* "~a" is "-a - 1". Silly, but easy. */ + return simplify_giv_expr (gen_rtx (MINUS, mode, + gen_rtx (NEG, mode, XEXP (x, 0)), + const1_rtx), + benefit); + + case USE: + /* Already in proper form for invariant. */ + return x; + + case REG: + /* If this is a new register, we can't deal with it. */ + if (REGNO (x) >= max_reg_before_loop) + return 0; + + /* Check for biv or giv. */ + switch (reg_iv_type[REGNO (x)]) + { + case BASIC_INDUCT: + return x; + case GENERAL_INDUCT: + { + struct induction *v = reg_iv_info[REGNO (x)]; + + /* Form expression from giv and add benefit. Ensure this giv + can derive another and subtract any needed adjustment if so. */ + *benefit += v->benefit; + if (v->cant_derive) + return 0; + + tem = gen_rtx (PLUS, mode, gen_rtx (MULT, mode, + v->src_reg, v->mult_val), + v->add_val); + if (v->derive_adjustment) + tem = gen_rtx (MINUS, mode, tem, v->derive_adjustment); + return simplify_giv_expr (tem, benefit); + } + } + + /* Fall through to general case. */ + default: + /* If invariant, return as USE (unless CONST_INT). + Otherwise, not giv. */ + if (GET_CODE (x) == USE) + x = XEXP (x, 0); + + if (invariant_p (x) == 1) + { + if (GET_CODE (x) == CONST_INT) + return x; + else + return gen_rtx (USE, mode, x); + } + else + return 0; + } +} + +/* Help detect a giv that is calculated by several consecutive insns; + for example, + giv = biv * M + giv = giv + A + The caller has already identified the first insn P as having a giv as dest; + we check that all other insns that set the same register follow + immediately after P, that they alter nothing else, + and that the result of the last is still a giv. + + The value is 0 if the reg set in P is not really a giv. + Otherwise, the value is the amount gained by eliminating + all the consecutive insns that compute the value. + + FIRST_BENEFIT is the amount gained by eliminating the first insn, P. + SRC_REG is the reg of the biv; DEST_REG is the reg of the giv. + + The coefficients of the ultimate giv value are stored in + *MULT_VAL and *ADD_VAL. */ + +static int +consec_sets_giv (first_benefit, p, src_reg, dest_reg, + add_val, mult_val) + int first_benefit; + rtx p; + rtx src_reg; + rtx dest_reg; + rtx *add_val; + rtx *mult_val; +{ + int count; + enum rtx_code code; + int benefit; + rtx temp; + rtx set; + + /* Indicate that this is a giv so that we can update the value produced in + each insn of the multi-insn sequence. + + This induction structure will be used only by the call to + general_induction_var below, so we can allocate it on our stack. + If this is a giv, our caller will replace the induct var entry with + a new induction structure. */ + struct induction *v + = (struct induction *) alloca (sizeof (struct induction)); + v->src_reg = src_reg; + v->mult_val = *mult_val; + v->add_val = *add_val; + v->benefit = first_benefit; + v->cant_derive = 0; + v->derive_adjustment = 0; + + reg_iv_type[REGNO (dest_reg)] = GENERAL_INDUCT; + reg_iv_info[REGNO (dest_reg)] = v; + + count = n_times_set[REGNO (dest_reg)] - 1; + + while (count > 0) + { + p = NEXT_INSN (p); + code = GET_CODE (p); + + /* If libcall, skip to end of call sequence. */ + if (code == INSN && (temp = find_reg_note (p, REG_LIBCALL, 0))) + p = XEXP (temp, 0); + + if (code == INSN + && (set = single_set (p)) + && GET_CODE (SET_DEST (set)) == REG + && SET_DEST (set) == dest_reg + && ((benefit = general_induction_var (SET_SRC (set), &src_reg, + add_val, mult_val)) + /* Giv created by equivalent expression. */ + || ((temp = find_reg_note (p, REG_EQUAL, 0)) + && (benefit = general_induction_var (XEXP (temp, 0), &src_reg, + add_val, mult_val)))) + && src_reg == v->src_reg) + { + if (find_reg_note (p, REG_RETVAL, 0)) + benefit += libcall_benefit (p); + + count--; + v->mult_val = *mult_val; + v->add_val = *add_val; + v->benefit = benefit; + } + else if (code != NOTE) + { + /* Allow insns that set something other than this giv to a + constant. Such insns are needed on machines which cannot + include long constants and should not disqualify a giv. */ + if (code == INSN + && (set = single_set (p)) + && SET_DEST (set) != dest_reg + && CONSTANT_P (SET_SRC (set))) + continue; + + reg_iv_type[REGNO (dest_reg)] = UNKNOWN_INDUCT; + return 0; + } + } + + return v->benefit; +} + +/* Return an rtx, if any, that expresses giv G2 as a function of the register + represented by G1. If no such expression can be found, or it is clear that + it cannot possibly be a valid address, 0 is returned. + + To perform the computation, we note that + G1 = a * v + b and + G2 = c * v + d + where `v' is the biv. + + So G2 = (c/a) * G1 + (d - b*c/a) */ + +#ifdef ADDRESS_COST +static rtx +express_from (g1, g2) + struct induction *g1, *g2; +{ + rtx mult, add; + + /* The value that G1 will be multiplied by must be a constant integer. Also, + the only chance we have of getting a valid address is if b*c/a (see above + for notation) is also an integer. */ + if (GET_CODE (g1->mult_val) != CONST_INT + || GET_CODE (g2->mult_val) != CONST_INT + || GET_CODE (g1->add_val) != CONST_INT + || g1->mult_val == const0_rtx + || INTVAL (g2->mult_val) % INTVAL (g1->mult_val) != 0) + return 0; + + mult = gen_rtx (CONST_INT, VOIDmode, + INTVAL (g2->mult_val) / INTVAL (g1->mult_val)); + add = plus_constant (g2->add_val, - INTVAL (g1->add_val) * INTVAL (mult)); + + /* Form simplified final result. */ + if (mult == const0_rtx) + return add; + else if (mult == const1_rtx) + mult = g1->dest_reg; + else + mult = gen_rtx (MULT, g2->mode, g1->dest_reg, mult); + + if (add == const0_rtx) + return mult; + else + return gen_rtx (PLUS, g2->mode, mult, add); +} +#endif + +/* Return 1 if giv G2 can be combined with G1. This means that G2 can use + (either directly or via an address expression) a register used to represent + G1. Set g2->new_reg to a represtation of G1 (normally just + g1->dest_reg). */ + +static int +combine_givs_p (g1, g2) + struct induction *g1, *g2; +{ + rtx tem; + + /* If these givs are identical, they can be combined. */ + if (rtx_equal_p (g1->mult_val, g2->mult_val) + && rtx_equal_p (g1->add_val, g2->add_val)) + { + g2->new_reg = g1->dest_reg; + return 1; + } + +#ifdef ADDRESS_COST + /* If G2 can be expressed as a function of G1 and that function is valid + as an address and no more expensive than using a register for G2, + the expression of G2 in terms of G1 can be used. */ + if (g2->giv_type == DEST_ADDR + && (tem = express_from (g1, g2)) != 0 + && memory_address_p (g2->mem_mode, tem) + && ADDRESS_COST (tem) <= ADDRESS_COST (*g2->location)) + { + g2->new_reg = tem; + return 1; + } +#endif + + return 0; +} + +/* Check all pairs of givs for iv_class BL and see if any can be combined with + any other. If so, point SAME to the giv combined with and set NEW_REG to + be an expression (in terms of the other giv's DEST_REG) equivalent to the + giv. Also, update BENEFIT and related fields for cost/benefit analysis. */ + +static void +combine_givs (bl) + struct iv_class *bl; +{ + struct induction *g1, *g2; + int pass; + + for (g1 = bl->giv; g1; g1 = g1->next_iv) + for (pass = 0; pass <= 1; pass++) + for (g2 = bl->giv; g2; g2 = g2->next_iv) + if (g1 != g2 + /* First try to combine with replaceable givs, then all givs. */ + && (g1->replaceable || pass == 1) + /* If either has already been combined or is to be ignored, can't + combine. */ + && ! g1->ignore && ! g2->ignore && ! g1->same && ! g2->same + /* If something has been based on G2, G2 cannot itself be based + on something else. */ + && ! g2->combined_with + && combine_givs_p (g1, g2)) + { + /* g2->new_reg set by `combine_givs_p' */ + g2->same = g1; + g1->combined_with = 1; + g1->benefit += g2->benefit; + /* ??? The new final_[bg]iv_value code does a much better job + of finding replaceable giv's, and hence this code may no + longer be necessary. */ + if (! g2->replaceable && REG_USERVAR_P (g2->dest_reg)) + g1->benefit -= copy_cost; + g1->lifetime += g2->lifetime; + g1->times_used += g2->times_used; + + if (loop_dump_stream) + fprintf (loop_dump_stream, "giv at %d combined with giv at %d\n", + INSN_UID (g2->insn), INSN_UID (g1->insn)); + } +} + +/* EMIT code before INSERT_BEFORE to set REG = B * M + A. */ + +void +emit_iv_add_mult (b, m, a, reg, insert_before) + rtx b; /* initial value of basic induction variable */ + rtx m; /* multiplicative constant */ + rtx a; /* additive constant */ + rtx reg; /* destination register */ + rtx insert_before; +{ + rtx seq; + rtx result; + + /* Prevent unexpected sharing of these rtx. */ + a = copy_rtx (a); + b = copy_rtx (b); + + /* Increase the lifetime of any invariants moved further in code. */ + update_reg_last_use (a, insert_before); + update_reg_last_use (b, insert_before); + update_reg_last_use (m, insert_before); + + start_sequence (); + result = expand_mult_add (b, reg, m, a, GET_MODE (reg), 0); + if (reg != result) + emit_move_insn (reg, result); + seq = gen_sequence (); + end_sequence (); + + emit_insn_before (seq, insert_before); +} + +/* Test whether A * B can be computed without + an actual multiply insn. Value is 1 if so. */ + +static int +product_cheap_p (a, b) + rtx a; + rtx b; +{ + int i; + rtx tmp; + struct obstack *old_rtl_obstack = rtl_obstack; + char *storage = (char *) obstack_alloc (&temp_obstack, 0); + int win = 1; + + /* If only one is constant, make it B. */ + if (GET_CODE (a) == CONST_INT) + tmp = a, a = b, b = tmp; + + /* If first constant, both constant, so don't need multiply. */ + if (GET_CODE (a) == CONST_INT) + return 1; + + /* If second not constant, neither is constant, so would need multiply. */ + if (GET_CODE (b) != CONST_INT) + return 0; + + /* One operand is constant, so might not need multiply insn. Generate the + code for the multiply and see if a call or multiply, or long sequence + of insns is generated. */ + + rtl_obstack = &temp_obstack; + start_sequence (); + expand_mult (GET_MODE (a), a, b, 0, 0); + tmp = gen_sequence (); + end_sequence (); + + if (GET_CODE (tmp) == SEQUENCE) + { + if (XVEC (tmp, 0) == 0) + win = 1; + else if (XVECLEN (tmp, 0) > 3) + win = 0; + else + for (i = 0; i < XVECLEN (tmp, 0); i++) + { + rtx insn = XVECEXP (tmp, 0, i); + + if (GET_CODE (insn) != INSN + || (GET_CODE (PATTERN (insn)) == SET + && GET_CODE (SET_SRC (PATTERN (insn))) == MULT) + || (GET_CODE (PATTERN (insn)) == PARALLEL + && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == SET + && GET_CODE (SET_SRC (XVECEXP (PATTERN (insn), 0, 0))) == MULT)) + { + win = 0; + break; + } + } + } + else if (GET_CODE (tmp) == SET + && GET_CODE (SET_SRC (tmp)) == MULT) + win = 0; + else if (GET_CODE (tmp) == PARALLEL + && GET_CODE (XVECEXP (tmp, 0, 0)) == SET + && GET_CODE (SET_SRC (XVECEXP (tmp, 0, 0))) == MULT) + win = 0; + + /* Free any storage we obtained in generating this multiply and restore rtl + allocation to its normal obstack. */ + obstack_free (&temp_obstack, storage); + rtl_obstack = old_rtl_obstack; + + return win; +} + +/* Check to see if loop can be terminated by a "decrement and branch until + zero" instruction. If so, add a REG_NONNEG note to the branch insn if so. + Also try reversing an increment loop to a decrement loop + to see if the optimization can be performed. + Value is nonzero if optimization was performed. */ + +/* This is useful even if the architecture doesn't have such an insn, + because it might change a loops which increments from 0 to n to a loop + which decrements from n to 0. A loop that decrements to zero is usually + faster than one that increments from zero. */ + +/* ??? This could be rewritten to use some of the loop unrolling procedures, + such as approx_final_value, biv_total_increment, loop_iterations, and + final_[bg]iv_value. */ + +static int +check_dbra_loop (loop_end, insn_count, loop_start) + rtx loop_end; + int insn_count; + rtx loop_start; +{ + struct iv_class *bl; + rtx reg; + rtx jump_label; + rtx final_value; + rtx start_value; + enum rtx_code branch_code; + rtx new_add_val; + rtx comparison; + rtx before_comparison; + rtx p; + + /* If last insn is a conditional branch, and the insn before tests a + register value, try to optimize it. Otherwise, we can't do anything. */ + + comparison = get_condition_for_loop (PREV_INSN (loop_end)); + if (comparison == 0) + return 0; + + /* Check all of the bivs to see if the compare uses one of them. + Skip biv's set more than once because we can't guarantee that + it will be zero on the last iteration. Also skip if the biv is + used between its update and the test insn. */ + + for (bl = loop_iv_list; bl; bl = bl->next) + { + if (bl->biv_count == 1 + && bl->biv->dest_reg == XEXP (comparison, 0) + && ! reg_used_between_p (regno_reg_rtx[bl->regno], bl->biv->insn, + PREV_INSN (PREV_INSN (loop_end)))) + break; + } + + if (! bl) + return 0; + + /* Look for the case where the basic induction variable is always + nonnegative, and equals zero on the last iteration. + In this case, add a reg_note REG_NONNEG, which allows the + m68k DBRA instruction to be used. */ + + if (((GET_CODE (comparison) == GT + && GET_CODE (XEXP (comparison, 1)) == CONST_INT + && INTVAL (XEXP (comparison, 1)) == -1) + || (GET_CODE (comparison) == NE && XEXP (comparison, 1) == const0_rtx)) + && GET_CODE (bl->biv->add_val) == CONST_INT + && INTVAL (bl->biv->add_val) < 0) + { + /* Initial value must be greater than 0, + init_val % -dec_value == 0 to ensure that it equals zero on + the last iteration */ + + if (GET_CODE (bl->initial_value) == CONST_INT + && INTVAL (bl->initial_value) > 0 + && (INTVAL (bl->initial_value) % + (-INTVAL (bl->biv->add_val))) == 0) + { + /* register always nonnegative, add REG_NOTE to branch */ + REG_NOTES (PREV_INSN (loop_end)) + = gen_rtx (EXPR_LIST, REG_NONNEG, 0, + REG_NOTES (PREV_INSN (loop_end))); + bl->nonneg = 1; + + return 1; + } + + /* If the decrement is 1 and the value was tested as >= 0 before + the loop, then we can safely optimize. */ + for (p = loop_start; p; p = PREV_INSN (p)) + { + if (GET_CODE (p) == CODE_LABEL) + break; + if (GET_CODE (p) != JUMP_INSN) + continue; + + before_comparison = get_condition_for_loop (p); + if (before_comparison + && XEXP (before_comparison, 0) == bl->biv->dest_reg + && GET_CODE (before_comparison) == LT + && XEXP (before_comparison, 1) == const0_rtx + && ! reg_set_between_p (bl->biv->dest_reg, p, loop_start) + && INTVAL (bl->biv->add_val) == -1) + { + REG_NOTES (PREV_INSN (loop_end)) + = gen_rtx (EXPR_LIST, REG_NONNEG, 0, + REG_NOTES (PREV_INSN (loop_end))); + bl->nonneg = 1; + + return 1; + } + } + } + else if (num_mem_sets <= 1) + { + /* Try to change inc to dec, so can apply above optimization. */ + /* Can do this if: + all registers modified are induction variables or invariant, + all memory references have non-overlapping addresses + (obviously true if only one write) + allow 2 insns for the compare/jump at the end of the loop. */ + int num_nonfixed_reads = 0; + /* 1 if the iteration var is used only to count iterations. */ + int no_use_except_counting = 0; + + for (p = loop_start; p != loop_end; p = NEXT_INSN (p)) + if (GET_RTX_CLASS (GET_CODE (p)) == 'i') + num_nonfixed_reads += count_nonfixed_reads (PATTERN (p)); + + if (bl->giv_count == 0 + && ! loop_number_exit_labels[uid_loop_num[INSN_UID (loop_start)]]) + { + rtx bivreg = regno_reg_rtx[bl->regno]; + + /* If there are no givs for this biv, and the only exit is the + fall through at the end of the the loop, then + see if perhaps there are no uses except to count. */ + no_use_except_counting = 1; + for (p = loop_start; p != loop_end; p = NEXT_INSN (p)) + if (GET_RTX_CLASS (GET_CODE (p)) == 'i') + { + rtx set = single_set (p); + + if (set && GET_CODE (SET_DEST (set)) == REG + && REGNO (SET_DEST (set)) == bl->regno) + /* An insn that sets the biv is okay. */ + ; + else if (p == prev_nonnote_insn (prev_nonnote_insn (loop_end)) + || p == prev_nonnote_insn (loop_end)) + /* Don't bother about the end test. */ + ; + else if (reg_mentioned_p (bivreg, PATTERN (p))) + /* Any other use of the biv is no good. */ + { + no_use_except_counting = 0; + break; + } + } + } + + /* This code only acts for innermost loops. Also it simplifies + the memory address check by only reversing loops with + zero or one memory access. + Two memory accesses could involve parts of the same array, + and that can't be reversed. */ + + if (num_nonfixed_reads <= 1 + && !loop_has_call + && (no_use_except_counting + || (bl->giv_count + bl->biv_count + num_mem_sets + + num_movables + 2 == insn_count))) + { + rtx condition = get_condition_for_loop (PREV_INSN (loop_end)); + int win; + rtx tem; + + /* Loop can be reversed. */ + if (loop_dump_stream) + fprintf (loop_dump_stream, "Can reverse loop\n"); + + /* Now check other conditions: + initial_value must be zero, + final_value % add_val == 0, so that when reversed, the + biv will be zero on the last iteration. + + This test can probably be improved since +/- 1 in the constant + can be obtained by changing LT to LE and vice versa; this is + confusing. */ + + if (comparison && bl->initial_value == const0_rtx + && GET_CODE (XEXP (comparison, 1)) == CONST_INT + /* LE gets turned into LT */ + && GET_CODE (comparison) == LT + && (INTVAL (XEXP (comparison, 1)) + % INTVAL (bl->biv->add_val)) == 0) + { + /* Register will always be nonnegative, with value + 0 on last iteration if loop reversed */ + + /* Save some info needed to produce the new insns. */ + reg = bl->biv->dest_reg; + jump_label = XEXP (SET_SRC (PATTERN (PREV_INSN (loop_end))), 1); + new_add_val = gen_rtx (CONST_INT, VOIDmode, + - INTVAL (bl->biv->add_val)); + + final_value = XEXP (comparison, 1); + start_value = gen_rtx (CONST_INT, VOIDmode, + (INTVAL (XEXP (comparison, 1)) + - INTVAL (bl->biv->add_val))); + + /* Initialize biv to start_value before loop start. + The old initializing insn will be deleted as a + dead store by flow.c. */ + emit_insn_before (gen_move_insn (reg, start_value), loop_start); + + /* Add insn to decrement register, and delete insn + that incremented the register. */ + p = emit_insn_before (gen_add2_insn (reg, new_add_val), + bl->biv->insn); + delete_insn (bl->biv->insn); + + /* Update biv info to reflect its new status. */ + bl->biv->insn = p; + bl->initial_value = start_value; + bl->biv->add_val = new_add_val; + + /* Inc LABEL_NUSES so that delete_insn will + not delete the label. */ + LABEL_NUSES (XEXP (jump_label, 0)) ++; + + /* Emit an insn after the end of the loop to set the biv's + proper exit value if it is used anywhere outside the loop. */ + if ((regno_last_uid[bl->regno] + != INSN_UID (PREV_INSN (PREV_INSN (loop_end)))) + || ! bl->init_insn + || regno_first_uid[bl->regno] != INSN_UID (bl->init_insn)) + emit_insn_after (gen_move_insn (reg, final_value), + loop_end); + + /* Delete compare/branch at end of loop. */ + delete_insn (PREV_INSN (loop_end)); + delete_insn (PREV_INSN (loop_end)); + + /* Add new compare/branch insn at end of loop. */ + start_sequence (); + emit_cmp_insn (reg, const0_rtx, GE, 0, GET_MODE (reg), 0, 0); + emit_jump_insn (gen_bge (XEXP (jump_label, 0))); + tem = gen_sequence (); + end_sequence (); + emit_jump_insn_before (tem, loop_end); + + for (tem = PREV_INSN (loop_end); + tem && GET_CODE (tem) != JUMP_INSN; tem = PREV_INSN (tem)) + ; + if (tem) + { + JUMP_LABEL (tem) = XEXP (jump_label, 0); + + /* Increment of LABEL_NUSES done above. */ + /* Register is now always nonnegative, + so add REG_NONNEG note to the branch. */ + REG_NOTES (tem) = gen_rtx (EXPR_LIST, REG_NONNEG, 0, + REG_NOTES (tem)); + } + + bl->nonneg = 1; + + /* Mark that this biv has been reversed. Each giv which depends + on this biv, and which is also live past the end of the loop + will have to be fixed up. */ + + bl->reversed = 1; + + if (loop_dump_stream) + fprintf (loop_dump_stream, + "Reversed loop and added reg_nonneg\n"); + + return 1; + } + } + } + + return 0; +} + +/* Verify whether the biv BL appears to be eliminable, + based on the insns in the loop that refer to it. + LOOP_START is the first insn of the loop, and END is the end insn. + + If ELIMINATE_P is non-zero, actually do the elimination. + + THRESHOLD and INSN_COUNT are from loop_optimize and are used to + determine whether invariant insns should be placed inside or at the + start of the loop. */ + +static int +maybe_eliminate_biv (bl, loop_start, end, eliminate_p, threshold, insn_count) + struct iv_class *bl; + rtx loop_start; + rtx end; + int eliminate_p; + int threshold, insn_count; +{ + rtx reg = bl->biv->dest_reg; + rtx p, set; + struct induction *v; + + /* Scan all insns in the loop, stopping if we find one that uses the + biv in a way that we cannot eliminate. */ + + for (p = loop_start; p != end; p = NEXT_INSN (p)) + { + enum rtx_code code = GET_CODE (p); + rtx where = threshold >= insn_count ? loop_start : p; + + if ((code == INSN || code == JUMP_INSN || code == CALL_INSN) + && reg_mentioned_p (reg, PATTERN (p)) + && ! maybe_eliminate_biv_1 (PATTERN (p), p, bl, eliminate_p, where)) + { + if (loop_dump_stream) + fprintf (loop_dump_stream, + "Cannot eliminate biv %d: biv used in insn %d.\n", + bl->regno, INSN_UID (p)); + break; + } + } + + if (p == end) + { + if (loop_dump_stream) + fprintf (loop_dump_stream, "biv %d %s eliminated.\n", + bl->regno, eliminate_p ? "was" : "can be"); + return 1; + } + + return 0; +} + +/* If BL appears in X (part of the pattern of INSN), see if we can + eliminate its use. If so, return 1. If not, return 0. + + If BIV does not appear in X, return 1. + + If ELIMINATE_P is non-zero, actually do the elimination. WHERE indicates + where extra insns should be added. Depending on how many items have been + moved out of the loop, it will either be before INSN or at the start of + the loop. */ + +static int +maybe_eliminate_biv_1 (x, insn, bl, eliminate_p, where) + rtx x, insn; + struct iv_class *bl; + int eliminate_p; + rtx where; +{ + enum rtx_code code = GET_CODE (x); + rtx reg = bl->biv->dest_reg; + enum machine_mode mode = GET_MODE (reg); + struct induction *v; + rtx arg, new, tem; + int arg_operand; + char *fmt; + int i, j; + + switch (code) + { + case REG: + /* If we haven't already been able to do something with this BIV, + we can't eliminate it. */ + if (x == reg) + return 0; + return 1; + + case SET: + /* If this sets the BIV, it is not a problem. */ + if (SET_DEST (x) == reg) + return 1; + + /* If this is an insn that defines a giv, it is also ok because + it will go away when the giv is reduced. */ + for (v = bl->giv; v; v = v->next_iv) + if (v->giv_type == DEST_REG && SET_DEST (x) == v->dest_reg) + return 1; + +#ifdef HAVE_cc0 + if (SET_DEST (x) == cc0_rtx && SET_SRC (x) == reg) + { + /* Can replace with any giv that was reduced and + that has (MULT_VAL != 0) and (ADD_VAL == 0). + Require a constant for MULT_VAL, so we know it's nonzero. */ + + for (v = bl->giv; v; v = v->next_iv) + if (CONSTANT_P (v->mult_val) && v->mult_val != const0_rtx + && v->add_val == const0_rtx + && ! v->ignore && ! v->maybe_dead + && v->mode == mode) + { + if (! eliminate_p) + return 1; + + /* If the giv has the opposite direction of change, + then reverse the comparison. */ + if (INTVAL (v->mult_val) < 0) + new = gen_rtx (COMPARE, GET_MODE (v->new_reg), + const0_rtx, v->new_reg); + else + new = v->new_reg; + + /* We can probably test that giv's reduced reg. */ + if (validate_change (insn, &SET_SRC (x), new, 0)) + return 1; + } + + /* Look for a giv with (MULT_VAL != 0) and (ADD_VAL != 0); + replace test insn with a compare insn (cmp REDUCED_GIV ADD_VAL). + Require a constant for MULT_VAL, so we know it's nonzero. */ + + for (v = bl->giv; v; v = v->next_iv) + if (CONSTANT_P (v->mult_val) && v->mult_val != const0_rtx + && ! v->ignore && ! v->maybe_dead + && v->mode == mode) + { + if (! eliminate_p) + return 1; + + /* If the giv has the opposite direction of change, + then reverse the comparison. */ + if (INTVAL (v->mult_val) < 0) + new = gen_rtx (COMPARE, VOIDmode, copy_rtx (v->add_val), + v->new_reg); + else + new = gen_rtx (COMPARE, VOIDmode, v->new_reg, + copy_rtx (v->add_val)); + + /* Replace biv with the giv's reduced register. */ + update_reg_last_use (v->add_val, insn); + if (validate_change (insn, &SET_SRC (PATTERN (insn)), new, 0)) + return 1; + + /* Insn doesn't support that constant or invariant. Copy it + into a register (it will be a loop invariant.) */ + tem = gen_reg_rtx (GET_MODE (v->new_reg)); + + emit_insn_before (gen_move_insn (tem, copy_rtx (v->add_val)), + where); + + if (validate_change (insn, &SET_SRC (PATTERN (insn)), + gen_rtx (COMPARE, VOIDmode, + v->new_reg, tem), 0)) + return 1; + } + } +#endif + break; + + case COMPARE: + case EQ: case NE: + case GT: case GE: case GTU: case GEU: + case LT: case LE: case LTU: case LEU: + /* See if either argument is the biv. */ + if (XEXP (x, 0) == reg) + arg = XEXP (x, 1), arg_operand = 1; + else if (XEXP (x, 1) == reg) + arg = XEXP (x, 0), arg_operand = 0; + else + break; + + if (CONSTANT_P (arg)) + { + /* First try to replace with any giv that has constant positive + mult_val and constant add_val. We might be able to support + negative mult_val, but it seems complex to do it in general. */ + + for (v = bl->giv; v; v = v->next_iv) + if (CONSTANT_P (v->mult_val) && INTVAL (v->mult_val) > 0 + && CONSTANT_P (v->add_val) + && ! v->ignore && ! v->maybe_dead + && v->mode == mode) + { + if (! eliminate_p) + return 1; + + /* Replace biv with the giv's reduced reg. */ + XEXP (x, 1-arg_operand) = v->new_reg; + + /* If all constants are actually constant integers and + the derived constant can be directly placed in the COMPARE, + do so. */ + if (GET_CODE (arg) == CONST_INT + && GET_CODE (v->mult_val) == CONST_INT + && GET_CODE (v->add_val) == CONST_INT + && validate_change (insn, &XEXP (x, arg_operand), + gen_rtx (CONST_INT, VOIDmode, + (INTVAL (arg) + * INTVAL (v->mult_val) + + INTVAL (v->add_val))), 0)) + return 1; + + /* Otherwise, load it into a register. */ + tem = gen_reg_rtx (mode); + emit_iv_add_mult (arg, v->mult_val, v->add_val, tem, where); + if (validate_change (insn, &XEXP (x, arg_operand), tem, 0)) + return 1; + + /* If that failed, put back the change we made above. */ + XEXP (x, 1-arg_operand) = reg; + } + + /* Look for giv with positive constant mult_val and nonconst add_val. + Insert insns to calculate new compare value. */ + + for (v = bl->giv; v; v = v->next_iv) + if (CONSTANT_P (v->mult_val) + && ! v->ignore && ! v->maybe_dead + && v->mode == mode) + { + rtx tem; + + if (! eliminate_p) + return 1; + + tem = gen_reg_rtx (mode); + + /* Replace biv with giv's reduced register. */ + validate_change (insn, &XEXP (x, 1 - arg_operand), + v->new_reg, 1); + + /* Compute value to compare against. */ + emit_iv_add_mult (arg, v->mult_val, v->add_val, tem, where); + /* Use it in this insn. */ + validate_change (insn, &XEXP (x, arg_operand), tem, 1); + if (apply_change_group ()) + return 1; + } + } + else if (GET_CODE (arg) == REG || GET_CODE (arg) == MEM) + { + if (invariant_p (arg) == 1) + { + /* Look for giv with constant positive mult_val and nonconst + add_val. Insert insns to compute new compare value. */ + + for (v = bl->giv; v; v = v->next_iv) + if (CONSTANT_P (v->mult_val) && INTVAL (v->mult_val) > 0 + && ! v->ignore && ! v->maybe_dead + && v->mode == mode) + { + rtx tem; + + if (! eliminate_p) + return 1; + + tem = gen_reg_rtx (mode); + + /* Replace biv with giv's reduced register. */ + validate_change (insn, &XEXP (x, 1 - arg_operand), + v->new_reg, 1); + + /* Compute value to compare against. */ + emit_iv_add_mult (arg, v->mult_val, v->add_val, + tem, where); + validate_change (insn, &XEXP (x, arg_operand), tem, 1); + if (apply_change_group ()) + return 1; + } + } + + /* This code has problems. Basically, you can't know when + seeing if we will eliminate BL, whether a particular giv + of ARG will be reduced. If it isn't going to be reduced, + we can't eliminate BL. We can try forcing it to be reduced, + but that can generate poor code. + + The problem is that the benefit of reducing TV, below should + be increased if BL can actually be eliminated, but this means + we might have to do a topological sort of the order in which + we try to process biv. It doesn't seem worthwhile to do + this sort of thing now. */ + +#if 0 + /* Otherwise the reg compared with had better be a biv. */ + if (GET_CODE (arg) != REG + || reg_iv_type[REGNO (arg)] != BASIC_INDUCT) + return 0; + + /* Look for a pair of givs, one for each biv, + with identical coefficients. */ + for (v = bl->giv; v; v = v->next_iv) + { + struct induction *tv; + + if (v->ignore || v->maybe_dead || v->mode != mode) + continue; + + for (tv = reg_biv_class[REGNO (arg)]->giv; tv; tv = tv->next_iv) + if (! tv->ignore && ! tv->maybe_dead + && rtx_equal_p (tv->mult_val, v->mult_val) + && rtx_equal_p (tv->add_val, v->add_val) + && tv->mode == mode) + { + if (! eliminate_p) + return 1; + + /* Replace biv with its giv's reduced reg. */ + XEXP (x, 1-arg_operand) = v->new_reg; + /* Replace other operand with the other giv's + reduced reg. */ + XEXP (x, arg_operand) = tv->new_reg; + return 1; + } + } +#endif + } + + /* If we get here, the biv can't be eliminated. */ + return 0; + + case MEM: + /* If this address is a DEST_ADDR giv, it doesn't matter if the + biv is used in it, since it will be replaced. */ + for (v = bl->giv; v; v = v->next_iv) + if (v->giv_type == DEST_ADDR && v->location == &XEXP (x, 0)) + return 1; + break; + } + + /* See if any subexpression fails elimination. */ + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + switch (fmt[i]) + { + case 'e': + if (! maybe_eliminate_biv_1 (XEXP (x, i), insn, bl, + eliminate_p, where)) + return 0; + break; + + case 'E': + for (j = XVECLEN (x, i) - 1; j >= 0; j--) + if (! maybe_eliminate_biv_1 (XVECEXP (x, i, j), insn, bl, + eliminate_p, where)) + return 0; + break; + } + } + + return 1; +} + +/* Return nonzero if the last use of REG + is in an insn following INSN in the same basic block. */ + +static int +last_use_this_basic_block (reg, insn) + rtx reg; + rtx insn; +{ + rtx n; + for (n = insn; + n && GET_CODE (n) != CODE_LABEL && GET_CODE (n) != JUMP_INSN; + n = NEXT_INSN (n)) + { + if (regno_last_uid[REGNO (reg)] == INSN_UID (n)) + return 1; + } + return 0; +} + +/* Called via `note_stores' to record the initial value of a biv. Here we + just record the location of the set and process it later. */ + +static void +record_initial (dest, set) + rtx dest; + rtx set; +{ + struct iv_class *bl; + + if (GET_CODE (dest) != REG + || REGNO (dest) >= max_reg_before_loop + || reg_iv_type[REGNO (dest)] != BASIC_INDUCT) + return; + + bl = reg_biv_class[REGNO (dest)]; + + /* If this is the first set found, record it. */ + if (bl->init_insn == 0) + { + bl->init_insn = note_insn; + bl->init_set = set; + } +} + +/* If any of the registers in X are "old" and currently have a last use earlier + than INSN, update them to have a last use of INSN. Their actual last use + will be the previous insn but it will not have a valid uid_luid so we can't + use it. */ + +static void +update_reg_last_use (x, insn) + rtx x; + rtx insn; +{ + /* Check for the case where INSN does not have a valid luid. In this case, + there is no need to modify the regno_last_uid, as this can only happen + when code is inserted after the loop_end to set a pseudo's final value, + and hence this insn will never be the last use of x. */ + if (GET_CODE (x) == REG && REGNO (x) < max_reg_before_loop + && INSN_UID (insn) < max_uid_for_loop + && uid_luid[regno_last_uid[REGNO (x)]] < uid_luid[INSN_UID (insn)]) + regno_last_uid[REGNO (x)] = INSN_UID (insn); + else + { + register int i, j; + register char *fmt = GET_RTX_FORMAT (GET_CODE (x)); + for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + update_reg_last_use (XEXP (x, i), insn); + else if (fmt[i] == 'E') + for (j = XVECLEN (x, i) - 1; j >= 0; j--) + update_reg_last_use (XVECEXP (x, i, j), insn); + } + } +} + +/* Given a jump insn JUMP, return the condition that will cause it to branch + to its JUMP_LABEL. If the condition cannot be understood, or is an + inequality floating-point comparison which needs to be reversed, 0 will + be returned. + + If EARLIEST is non-zero, it is a pointer to a place where the earliest + insn used in locating the condition was found. If a replacement test + of the condition is desired, it should be placed in front of that + insn and we will be sure that the inputs are still valid. + + The condition will be returned in a canonical form to simplify testing by + callers. Specifically: + + (1) The code will always be a comparison operation (EQ, NE, GT, etc.). + (2) Both operands will be machine operands; (cc0) will have been replaced. + (3) If an operand is a constant, it will be the second operand. + (4) (LE x const) will be replaced with (LT x ) and similarly + for GE, GEU, and LEU. */ + +rtx +get_condition (jump, earliest) + rtx jump; + rtx *earliest; +{ + enum rtx_code code; + rtx prev = jump; + rtx set; + rtx tem; + rtx op0, op1; + int reverse_code = 0; + int did_reverse_condition = 0; + + /* If this is not a standard conditional jump, we can't parse it. */ + if (GET_CODE (jump) != JUMP_INSN + || ! condjump_p (jump) || simplejump_p (jump)) + return 0; + + code = GET_CODE (XEXP (SET_SRC (PATTERN (jump)), 0)); + op0 = XEXP (XEXP (SET_SRC (PATTERN (jump)), 0), 0); + op1 = XEXP (XEXP (SET_SRC (PATTERN (jump)), 0), 1); + + if (earliest) + *earliest = jump; + + /* If this branches to JUMP_LABEL when the condition is false, reverse + the condition. */ + if (XEXP (XEXP (SET_SRC (PATTERN (jump)), 2), 0) == JUMP_LABEL (jump)) + code = reverse_condition (code), did_reverse_condition ^= 1; + + /* If we are comparing a register with zero, see if the register is set + in the previous insn to a COMPARE or a comparison operation. Perform + the same tests as a function of STORE_FLAG_VALUE as find_comparison_args + in cse.c */ + + while (GET_RTX_CLASS (code) == '<' && op1 == const0_rtx) + { + /* Set non-zero when we find something of interest. */ + rtx x = 0; + +#ifdef HAVE_cc0 + /* If comparison with cc0, import actual comparison from compare + insn. */ + if (op0 == cc0_rtx) + { + if ((prev = prev_nonnote_insn (prev)) == 0 + || GET_CODE (prev) != INSN + || (set = single_set (prev)) == 0 + || SET_DEST (set) != cc0_rtx) + return 0; + + op0 = SET_SRC (set); + op1 = CONST0_RTX (GET_MODE (op0)); + if (earliest) + *earliest = prev; + } +#endif + + /* If this is a COMPARE, pick up the two things being compared. */ + if (GET_CODE (op0) == COMPARE) + { + op1 = XEXP (op0, 1); + op0 = XEXP (op0, 0); + continue; + } + else if (GET_CODE (op0) != REG) + break; + + /* Go back to the previous insn. Stop if it is not an INSN. We also + stop if it isn't a single set or if it has a REG_INC note because + we don't want to bother dealing with it. */ + + if ((prev = prev_nonnote_insn (prev)) == 0 + || GET_CODE (prev) != INSN + || FIND_REG_INC_NOTE (prev, 0) + || (set = single_set (prev)) == 0) + break; + + /* If this is setting OP0, get what it sets it to if it looks + relevant. */ + if (SET_DEST (set) == op0) + { + enum machine_mode inner_mode = GET_MODE (SET_SRC (set)); + + if ((GET_CODE (SET_SRC (set)) == COMPARE + || ((code == NE + || (code == LT + && GET_MODE_BITSIZE (inner_mode) <= HOST_BITS_PER_INT + && (STORE_FLAG_VALUE + & (1 << (GET_MODE_BITSIZE (inner_mode) - 1))))) + && GET_RTX_CLASS (GET_CODE (SET_SRC (set))) == '<'))) + x = SET_SRC (set); + else if ((code == EQ + || (code == GE + && GET_MODE_BITSIZE (inner_mode) <= HOST_BITS_PER_INT + && (STORE_FLAG_VALUE + & (1 << (GET_MODE_BITSIZE (inner_mode) - 1))))) + && GET_RTX_CLASS (GET_CODE (SET_SRC (set))) == '<') + { + /* We might have reversed a LT to get a GE here. But this wasn't + actually the comparison of data, so we don't flag that we + have had to reverse the condition. */ + did_reverse_condition ^= 1; + reverse_code = 1; + x = SET_SRC (set); + } + } + + else if (reg_set_p (op0, prev)) + /* If this sets OP0, but not directly, we have to give up. */ + break; + + if (x) + { + if (GET_RTX_CLASS (GET_CODE (x)) == '<') + code = GET_CODE (x); + if (reverse_code) + { + code = reverse_condition (code); + did_reverse_condition ^= 1; + reverse_code = 0; + } + + op0 = XEXP (x, 0), op1 = XEXP (x, 1); + if (earliest) + *earliest = prev; + } + } + + /* If constant is first, put it last. */ + if (CONSTANT_P (op0)) + code = swap_condition (code), tem = op0, op0 = op1, op1 = tem; + + /* If OP0 is the result of a comparison, we weren't able to find what + was really being compared, so fail. */ + if (GET_MODE_CLASS (GET_MODE (op0)) == MODE_CC) + return 0; + + /* Canonicalize any ordered comparison with integers involving equality. */ + if (GET_CODE (op1) == CONST_INT) + { + int const_val = INTVAL (op1); + unsigned uconst_val = (unsigned) const_val; + + switch (code) + { + case LE: + code = LT; + op1 = gen_rtx (CONST_INT, VOIDmode, const_val + 1); + break; + + case GE: + code = GT; + op1 = gen_rtx (CONST_INT, VOIDmode, const_val - 1); + break; + + case LEU: + code = LTU; + op1 = gen_rtx (CONST_INT, VOIDmode, uconst_val + 1); + break; + + case GEU: + code = GTU; + op1 = gen_rtx (CONST_INT, VOIDmode, uconst_val - 1); + break; + } + } + + /* If this was floating-point and we reversed anything other than an + EQ or NE, return zero. */ + if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT + && did_reverse_condition && code != NE && code != EQ + && GET_MODE_CLASS (GET_MODE (op0)) == MODE_FLOAT) + return 0; + +#ifdef HAVE_cc0 + /* Never return CC0; return zero instead. */ + if (op0 == cc0_rtx) + return 0; +#endif + + return gen_rtx (code, VOIDmode, op0, op1); +} + +/* Similar to above routine, except that we also put an invariant last + unless both operands are invariants. */ + +rtx +get_condition_for_loop (x) + rtx x; +{ + rtx comparison = get_condition (x, 0); + + if (comparison == 0 + || ! invariant_p (XEXP (comparison, 0)) + || invariant_p (XEXP (comparison, 1))) + return comparison; + + return gen_rtx (swap_condition (GET_CODE (comparison)), VOIDmode, + XEXP (comparison, 1), XEXP (comparison, 0)); +}