From: Henner Zeller Date: Fri, 20 Jul 2018 15:11:20 +0000 (-0700) Subject: Use log_file_warning(), log_file_error() functions. X-Git-Tag: yosys-0.8~50^2 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b5ea598ef6cec535378c8cbb53170ccd1e5855ca;p=yosys.git Use log_file_warning(), log_file_error() functions. Wherever we can report a source-level location. --- diff --git a/frontends/ast/genrtlil.cc b/frontends/ast/genrtlil.cc index b8208fa80..e611ddcb1 100644 --- a/frontends/ast/genrtlil.cc +++ b/frontends/ast/genrtlil.cc @@ -238,7 +238,7 @@ struct AST_INTERNAL::ProcessGenerator if (found_anyedge_syncs) { if (found_global_syncs) - log_error("Found non-synthesizable event list at %s:%d!\n", always->filename.c_str(), always->linenum); + log_file_error(always->filename, always->linenum, "Found non-synthesizable event list!\n"); log("Note: Assuming pure combinatorial block at %s:%d in\n", always->filename.c_str(), always->linenum); log("compliance with IEC 62142(E):2005 / IEEE Std. 1364.1(E):2002. Recommending\n"); log("use of @* instead of @(...) for better match of synthesis and simulation.\n"); @@ -253,12 +253,12 @@ struct AST_INTERNAL::ProcessGenerator continue; found_clocked_sync = true; if (found_global_syncs || found_anyedge_syncs) - log_error("Found non-synthesizable event list at %s:%d!\n", always->filename.c_str(), always->linenum); + log_file_error(always->filename, always->linenum, "Found non-synthesizable event list!\n"); RTLIL::SyncRule *syncrule = new RTLIL::SyncRule; syncrule->type = child->type == AST_POSEDGE ? RTLIL::STp : RTLIL::STn; syncrule->signal = child->children[0]->genRTLIL(); if (GetSize(syncrule->signal) != 1) - log_error("Found posedge/negedge event on a signal that is not 1 bit wide at %s:%d!\n", always->filename.c_str(), always->linenum); + log_file_error(always->filename, always->linenum, "Found posedge/negedge event on a signal that is not 1 bit wide!\n"); addChunkActions(syncrule->actions, subst_lvalue_from, subst_lvalue_to, true); proc->syncs.push_back(syncrule); } @@ -549,12 +549,12 @@ struct AST_INTERNAL::ProcessGenerator break; case AST_WIRE: - log_error("Found wire declaration in block without label at at %s:%d!\n", ast->filename.c_str(), ast->linenum); + log_file_error(ast->filename, ast->linenum, "Found wire declaration in block without label!\n"); break; case AST_PARAMETER: case AST_LOCALPARAM: - log_error("Found parameter declaration in block without label at at %s:%d!\n", ast->filename.c_str(), ast->linenum); + log_file_error(ast->filename, ast->linenum, "Found parameter declaration in block without label!\n"); break; case AST_NONE: @@ -602,7 +602,7 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun if (id_ast == NULL && current_scope.count(str)) id_ast = current_scope.at(str); if (!id_ast) - log_error("Failed to resolve identifier %s for width detection at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to resolve identifier %s for width detection!\n", str.c_str()); if (id_ast->type == AST_PARAMETER || id_ast->type == AST_LOCALPARAM) { if (id_ast->children.size() > 1 && id_ast->children[1]->range_valid) { this_width = id_ast->children[1]->range_left - id_ast->children[1]->range_right + 1; @@ -612,7 +612,7 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun if (id_ast->children[0]->type == AST_CONSTANT) this_width = id_ast->children[0]->bits.size(); else - log_error("Failed to detect width for parameter %s at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width for parameter %s!\n", str.c_str()); if (children.size() != 0) range = children[0]; } else if (id_ast->type == AST_WIRE || id_ast->type == AST_AUTOWIRE) { @@ -624,7 +624,7 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun // log("---\n"); // id_ast->dumpAst(NULL, "decl> "); // dumpAst(NULL, "ref> "); - log_error("Failed to detect width of signal access `%s' at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width of signal access `%s'!\n", str.c_str()); } } else { this_width = id_ast->range_left - id_ast->range_right + 1; @@ -635,10 +635,10 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun this_width = 32; } else if (id_ast->type == AST_MEMORY) { if (!id_ast->children[0]->range_valid) - log_error("Failed to detect width of memory access `%s' at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width of memory access `%s'!\n", str.c_str()); this_width = id_ast->children[0]->range_left - id_ast->children[0]->range_right + 1; } else - log_error("Failed to detect width for identifier %s at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width for identifier %s!\n", str.c_str()); if (range) { if (range->children.size() == 1) this_width = 1; @@ -665,7 +665,7 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun case AST_TO_BITS: while (children[0]->simplify(true, false, false, 1, -1, false, false) == true) { } if (children[0]->type != AST_CONSTANT) - log_error("Left operand of tobits expression is not constant at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left operand of tobits expression is not constant!\n"); children[1]->detectSignWidthWorker(sub_width_hint, sign_hint); width_hint = max(width_hint, children[0]->bitsAsConst().as_int()); break; @@ -693,7 +693,7 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun case AST_REPLICATE: while (children[0]->simplify(true, false, false, 1, -1, false, true) == true) { } if (children[0]->type != AST_CONSTANT) - log_error("Left operand of replicate expression is not constant at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left operand of replicate expression is not constant!\n"); children[1]->detectSignWidthWorker(sub_width_hint, sub_sign_hint); width_hint = max(width_hint, children[0]->bitsAsConst().as_int() * sub_width_hint); sign_hint = false; @@ -767,7 +767,7 @@ void AstNode::detectSignWidthWorker(int &width_hint, bool &sign_hint, bool *foun if (!id2ast->is_signed) sign_hint = false; if (!id2ast->children[0]->range_valid) - log_error("Failed to detect width of memory access `%s' at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width of memory access `%s'!\n", str.c_str()); this_width = id2ast->children[0]->range_left - id2ast->children[0]->range_right + 1; width_hint = max(width_hint, this_width); break; @@ -1083,7 +1083,7 @@ RTLIL::SigSpec AstNode::genRTLIL(int width_hint, bool sign_hint) RTLIL::SigSpec left = children[0]->genRTLIL(); RTLIL::SigSpec right = children[1]->genRTLIL(); if (!left.is_fully_const()) - log_error("Left operand of replicate expression is not constant at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left operand of replicate expression is not constant!\n"); int count = left.as_int(); RTLIL::SigSpec sig; for (int i = 0; i < count; i++) @@ -1322,7 +1322,7 @@ RTLIL::SigSpec AstNode::genRTLIL(int width_hint, bool sign_hint) int num_words = 1; if (type == AST_MEMINIT) { if (children[2]->type != AST_CONSTANT) - log_error("Memory init with non-constant word count at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Memory init with non-constant word count!\n"); num_words = int(children[2]->asInt(false)); cell->parameters["\\WORDS"] = RTLIL::Const(num_words); } @@ -1514,7 +1514,7 @@ RTLIL::SigSpec AstNode::genRTLIL(int width_hint, bool sign_hint) if (attributes.count("\\reg")) { auto &attr = attributes.at("\\reg"); if (attr->type != AST_CONSTANT) - log_error("Attribute `reg' with non-constant value at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Attribute `reg' with non-constant value!\n"); cell->attributes["\\reg"] = attr->asAttrConst(); } diff --git a/frontends/ast/simplify.cc b/frontends/ast/simplify.cc index a16fdfeeb..81bd3cd7e 100644 --- a/frontends/ast/simplify.cc +++ b/frontends/ast/simplify.cc @@ -177,13 +177,13 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, // note that $display, $finish, and $stop are used for synthesis-time DRC so they're not in this list if ((type == AST_FCALL || type == AST_TCALL) && (str == "$strobe" || str == "$monitor" || str == "$time" || str == "$dumpfile" || str == "$dumpvars" || str == "$dumpon" || str == "$dumpoff" || str == "$dumpall")) { - log_warning("Ignoring call to system %s %s at %s:%d.\n", type == AST_FCALL ? "function" : "task", str.c_str(), filename.c_str(), linenum); + log_file_warning(filename, linenum, "Ignoring call to system %s %s.\n", type == AST_FCALL ? "function" : "task", str.c_str()); delete_children(); str = std::string(); } if ((type == AST_TCALL) && (str == "$display" || str == "$write") && (!current_always || current_always->type != AST_INITIAL)) { - log_warning("System task `%s' outside initial block is unsupported at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_warning(filename, linenum, "System task `%s' outside initial block is unsupported.\n", str.c_str()); delete_children(); str = std::string(); } @@ -202,7 +202,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, AstNode *node_string = children[0]; while (node_string->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (node_string->type != AST_CONSTANT) - log_error("Failed to evaluate system task `%s' with non-constant 1st argument at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system task `%s' with non-constant 1st argument.\n", str.c_str()); std::string sformat = node_string->bitsAsConst().decode_string(); // Other arguments are placeholders. Process the string as we go through it @@ -215,7 +215,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, { // If there's no next character, that's a problem if (i+1 >= sformat.length()) - log_error("System task `%s' called with `%%' at end of string at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "System task `%s' called with `%%' at end of string.\n", str.c_str()); char cformat = sformat[++i]; @@ -245,7 +245,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, node_arg = children[next_arg++]; while (node_arg->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (node_arg->type != AST_CONSTANT) - log_error("Failed to evaluate system task `%s' with non-constant argument at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system task `%s' with non-constant argument.\n", str.c_str()); break; case 'm': @@ -253,7 +253,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, break; default: - log_error("System task `%s' called with invalid/unsupported format specifier at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "System task `%s' called with invalid/unsupported format specifier.\n", str.c_str()); break; } @@ -374,7 +374,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, continue; wires_are_incompatible: if (stage > 1) - log_error("Incompatible re-declaration of wire %s at %s:%d.\n", node->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Incompatible re-declaration of wire %s.\n", node->str.c_str()); continue; } this_wire_scope[node->str] = node; @@ -402,7 +402,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (type == AST_ALWAYS || type == AST_INITIAL) { if (current_always != nullptr) - log_error("Invalid nesting of always blocks and/or initializations at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Invalid nesting of always blocks and/or initializations.\n"); current_always = this; current_always_clocked = false; @@ -451,7 +451,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, while (!children[1]->basic_prep && children[1]->simplify(false, false, false, stage, -1, false, true) == true) did_something = true; if (!children[1]->range_valid) - log_error("Non-constant width range on parameter decl at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Non-constant width range on parameter decl.\n"); width_hint = max(width_hint, children[1]->range_left - children[1]->range_right + 1); } break; @@ -695,7 +695,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (type == AST_DEFPARAM && !children.empty()) { if (children[0]->type != AST_IDENTIFIER) - log_error("Module name in defparam at %s:%d contains non-constant expressions!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Module name in defparam contains non-constant expressions!\n"); string modname, paramname = children[0]->str; @@ -712,7 +712,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, } if (pos == std::string::npos) - log_error("Can't find object for defparam `%s` at %s:%d!\n", RTLIL::unescape_id(paramname).c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Can't find object for defparam `%s`!\n", RTLIL::unescape_id(paramname).c_str()); paramname = "\\" + paramname.substr(pos+1); @@ -732,7 +732,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (type == AST_PREFIX) { if (children[0]->type != AST_CONSTANT) { // dumpAst(NULL, "> "); - log_error("Index in generate block prefix syntax at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Index in generate block prefix syntax is not constant!\n"); } if (children[1]->type == AST_PREFIX) children[1]->simplify(const_fold, at_zero, in_lvalue, stage, width_hint, sign_hint, in_param); @@ -748,9 +748,9 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, // evaluate TO_BITS nodes if (type == AST_TO_BITS) { if (children[0]->type != AST_CONSTANT) - log_error("Left operand of to_bits expression is not constant at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left operand of to_bits expression is not constant!\n"); if (children[1]->type != AST_CONSTANT) - log_error("Right operand of to_bits expression is not constant at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Right operand of to_bits expression is not constant!\n"); RTLIL::Const new_value = children[1]->bitsAsConst(children[0]->bitsAsConst().as_int(), children[1]->is_signed); newNode = mkconst_bits(new_value.bits, children[1]->is_signed); goto apply_newNode; @@ -814,7 +814,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, multirange_dimensions.clear(); for (auto range : children[1]->children) { if (!range->range_valid) - log_error("Non-constant range on memory decl at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Non-constant range on memory decl.\n"); multirange_dimensions.push_back(min(range->range_left, range->range_right)); multirange_dimensions.push_back(max(range->range_left, range->range_right) - min(range->range_left, range->range_right) + 1); total_size *= multirange_dimensions.back(); @@ -832,7 +832,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, for (int i = 0; 2*i < GetSize(id2ast->multirange_dimensions); i++) { if (GetSize(children[0]->children) < i) - log_error("Insufficient number of array indices for %s at %s:%d.\n", log_id(str), filename.c_str(), linenum); + log_file_error(filename, linenum, "Insufficient number of array indices for %s.\n", log_id(str)); AstNode *new_index_expr = children[0]->children[i]->children.at(0)->clone(); @@ -861,7 +861,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (type == AST_PARAMETER || type == AST_LOCALPARAM) { if (children.size() > 1 && children[1]->type == AST_RANGE) { if (!children[1]->range_valid) - log_error("Non-constant width range on parameter decl at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Non-constant width range on parameter decl.\n"); int width = std::abs(children[1]->range_left - children[1]->range_right) + 1; if (children[0]->type == AST_REALVALUE) { RTLIL::Const constvalue = children[0]->realAsConst(width); @@ -924,7 +924,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (type == AST_IDENTIFIER && children.size() == 2 && children[0]->type == AST_RANGE && children[1]->type == AST_RANGE && !in_lvalue) { if (id2ast == NULL || id2ast->type != AST_MEMORY || children[0]->children.size() != 1) - log_error("Invalid bit-select on memory access at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Invalid bit-select on memory access!\n"); int mem_width, mem_size, addr_bits; id2ast->meminfo(mem_width, mem_size, addr_bits); @@ -973,10 +973,10 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, } if (type == AST_WHILE) - log_error("While loops are only allowed in constant functions at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "While loops are only allowed in constant functions!\n"); if (type == AST_REPEAT) - log_error("Repeat loops are only allowed in constant functions at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Repeat loops are only allowed in constant functions!\n"); // unroll for loops and generate-for blocks if ((type == AST_GENFOR || type == AST_FOR) && children.size() != 0) @@ -991,31 +991,31 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, body_ast = body_ast->children.at(0); if (init_ast->type != AST_ASSIGN_EQ) - log_error("Unsupported 1st expression of generate for-loop at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Unsupported 1st expression of generate for-loop!\n"); if (next_ast->type != AST_ASSIGN_EQ) - log_error("Unsupported 3rd expression of generate for-loop at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Unsupported 3rd expression of generate for-loop!\n"); if (type == AST_GENFOR) { if (init_ast->children[0]->id2ast == NULL || init_ast->children[0]->id2ast->type != AST_GENVAR) - log_error("Left hand side of 1st expression of generate for-loop at %s:%d is not a gen var!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left hand side of 1st expression of generate for-loop is not a gen var!\n"); if (next_ast->children[0]->id2ast == NULL || next_ast->children[0]->id2ast->type != AST_GENVAR) - log_error("Left hand side of 3rd expression of generate for-loop at %s:%d is not a gen var!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left hand side of 3rd expression of generate for-loop is not a gen var!\n"); } else { if (init_ast->children[0]->id2ast == NULL || init_ast->children[0]->id2ast->type != AST_WIRE) - log_error("Left hand side of 1st expression of generate for-loop at %s:%d is not a register!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left hand side of 1st expression of generate for-loop is not a register!\n"); if (next_ast->children[0]->id2ast == NULL || next_ast->children[0]->id2ast->type != AST_WIRE) - log_error("Left hand side of 3rd expression of generate for-loop at %s:%d is not a register!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Left hand side of 3rd expression of generate for-loop is not a register!\n"); } if (init_ast->children[0]->id2ast != next_ast->children[0]->id2ast) - log_error("Incompatible left-hand sides in 1st and 3rd expression of generate for-loop at %s:%d!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Incompatible left-hand sides in 1st and 3rd expression of generate for-loop!\n"); // eval 1st expression AstNode *varbuf = init_ast->children[1]->clone(); while (varbuf->simplify(true, false, false, stage, 32, true, false)) { } if (varbuf->type != AST_CONSTANT) - log_error("Right hand side of 1st expression of generate for-loop at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Right hand side of 1st expression of generate for-loop is not constant!\n"); varbuf = new AstNode(AST_LOCALPARAM, varbuf); varbuf->str = init_ast->children[0]->str; @@ -1037,7 +1037,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, while (buf->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (buf->type != AST_CONSTANT) - log_error("2nd expression of generate for-loop at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "2nd expression of generate for-loop is not constant!\n"); if (buf->integer == 0) { delete buf; @@ -1078,7 +1078,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, while (buf->simplify(true, false, false, stage, 32, true, false)) { } if (buf->type != AST_CONSTANT) - log_error("Right hand side of 3rd expression of generate for-loop at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Right hand side of 3rd expression of generate for-loop is not constant!\n"); delete varbuf->children[0]; varbuf->children[0] = buf; @@ -1144,7 +1144,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (buf->type != AST_CONSTANT) { // for (auto f : log_files) // dumpAst(f, "verilog-ast> "); - log_error("Condition for generate if at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Condition for generate if is not constant!\n"); } if (buf->asBool() != 0) { delete buf; @@ -1185,7 +1185,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (buf->type != AST_CONSTANT) { // for (auto f : log_files) // dumpAst(f, "verilog-ast> "); - log_error("Condition for generate case at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Condition for generate case is not constant!\n"); } bool ref_signed = buf->is_signed; @@ -1219,7 +1219,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (buf->type != AST_CONSTANT) { // for (auto f : log_files) // dumpAst(f, "verilog-ast> "); - log_error("Expression in generate case at %s:%d is not constant!\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Expression in generate case is not constant!\n"); } bool is_selected = RTLIL::const_eq(ref_value, buf->bitsAsConst(), ref_signed && buf->is_signed, ref_signed && buf->is_signed, 1).as_bool(); @@ -1260,7 +1260,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, if (type == AST_CELLARRAY) { if (!children.at(0)->range_valid) - log_error("Non-constant array range on cell array at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Non-constant array range on cell array.\n"); newNode = new AstNode(AST_GENBLOCK); int num = max(children.at(0)->range_left, children.at(0)->range_right) - min(children.at(0)->range_left, children.at(0)->range_right) + 1; @@ -1271,7 +1271,7 @@ bool AstNode::simplify(bool const_fold, bool at_zero, bool in_lvalue, int stage, newNode->children.push_back(new_cell); new_cell->str += stringf("[%d]", idx); if (new_cell->type == AST_PRIMITIVE) { - log_error("Cell arrays of primitives are currently not supported at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Cell arrays of primitives are currently not supported.\n"); } else { log_assert(new_cell->children.at(0)->type == AST_CELLTYPE); new_cell->children.at(0)->str = stringf("$array:%d:%d:%s", i, num, new_cell->children.at(0)->str.c_str()); @@ -1645,7 +1645,7 @@ skip_dynamic_range_lvalue_expansion:; while (left_at_zero_ast->simplify(true, true, false, 1, -1, false, false)) { } while (right_at_zero_ast->simplify(true, true, false, 1, -1, false, false)) { } if (left_at_zero_ast->type != AST_CONSTANT || right_at_zero_ast->type != AST_CONSTANT) - log_error("Unsupported expression on dynamic range select on signal `%s' at %s:%d!\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Unsupported expression on dynamic range select on signal `%s'!\n", str.c_str()); int width = left_at_zero_ast->integer - right_at_zero_ast->integer + 1; assign_data = new AstNode(AST_ASSIGN_LE, new AstNode(AST_IDENTIFIER), @@ -1749,7 +1749,7 @@ skip_dynamic_range_lvalue_expansion:; AstNode *buf = children[1]->clone(); while (buf->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (buf->type != AST_CONSTANT) - log_error("Failed to evaluate system function `%s' with non-constant value at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system function `%s' with non-constant value.\n", str.c_str()); num_steps = buf->asInt(true); delete buf; @@ -1846,7 +1846,7 @@ skip_dynamic_range_lvalue_expansion:; AstNode *buf = children[0]->clone(); while (buf->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (buf->type != AST_CONSTANT) - log_error("Failed to evaluate system function `%s' with non-constant value at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system function `%s' with non-constant value.\n", str.c_str()); RTLIL::Const arg_value = buf->bitsAsConst(); if (arg_value.as_bool()) @@ -1893,7 +1893,7 @@ skip_dynamic_range_lvalue_expansion:; if (id_ast == NULL && current_scope.count(buf->str)) id_ast = current_scope.at(buf->str); if (!id_ast) - log_error("Failed to resolve identifier %s for width detection at %s:%d!\n", buf->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to resolve identifier %s for width detection!\n", buf->str.c_str()); if (id_ast->type == AST_MEMORY) { // We got here only if the argument is a memory // Otherwise $size() and $bits() return the expression width @@ -1901,15 +1901,15 @@ skip_dynamic_range_lvalue_expansion:; if (str == "\\$bits") { if (mem_range->type == AST_RANGE) { if (!mem_range->range_valid) - log_error("Failed to detect width of memory access `%s' at %s:%d!\n", buf->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width of memory access `%s'!\n", buf->str.c_str()); mem_depth = mem_range->range_left - mem_range->range_right + 1; } else - log_error("Unknown memory depth AST type in `%s' at %s:%d!\n", buf->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Unknown memory depth AST type in `%s'!\n", buf->str.c_str()); } else { // $size() if (mem_range->type == AST_RANGE) { if (!mem_range->range_valid) - log_error("Failed to detect width of memory access `%s' at %s:%d!\n", buf->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to detect width of memory access `%s'!\n", buf->str.c_str()); int dims; if (id_ast->multirange_dimensions.empty()) dims = 1; @@ -1920,9 +1920,9 @@ skip_dynamic_range_lvalue_expansion:; else if (dim <= dims) { width_hint = id_ast->multirange_dimensions[2*dim-1]; } else if ((dim > dims+1) || (dim < 0)) - log_error("Dimension %d out of range in `%s', as it only has dimensions 1..%d at %s:%d!\n", dim, buf->str.c_str(), dims+1, filename.c_str(), linenum); + log_file_error(filename, linenum, "Dimension %d out of range in `%s', as it only has dimensions 1..%d!\n", dim, buf->str.c_str(), dims+1); } else - log_error("Unknown memory depth AST type in `%s' at %s:%d!\n", buf->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Unknown memory depth AST type in `%s'!\n", buf->str.c_str()); } } } @@ -2018,14 +2018,14 @@ skip_dynamic_range_lvalue_expansion:; for (int i = 2; i < GetSize(dpi_decl->children); i++) { if (i-2 >= GetSize(children)) - log_error("Insufficient number of arguments in DPI function call at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Insufficient number of arguments in DPI function call.\n"); argtypes.push_back(RTLIL::unescape_id(dpi_decl->children.at(i)->str)); args.push_back(children.at(i-2)->clone()); while (args.back()->simplify(true, false, false, stage, -1, false, true)) { } if (args.back()->type != AST_CONSTANT && args.back()->type != AST_REALVALUE) - log_error("Failed to evaluate DPI function with non-constant argument at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate DPI function with non-constant argument.\n"); } newNode = dpi_call(rtype, fname, argtypes, args); @@ -2037,7 +2037,7 @@ skip_dynamic_range_lvalue_expansion:; } if (current_scope.count(str) == 0 || current_scope[str]->type != AST_FUNCTION) - log_error("Can't resolve function name `%s' at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Can't resolve function name `%s'.\n", str.c_str()); } if (type == AST_TCALL) @@ -2045,9 +2045,9 @@ skip_dynamic_range_lvalue_expansion:; if (str == "$finish" || str == "$stop") { if (!current_always || current_always->type != AST_INITIAL) - log_error("System task `%s' outside initial block is unsupported at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "System task `%s' outside initial block is unsupported.\n", str.c_str()); - log_error("System task `%s' executed at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "System task `%s' executed.\n", str.c_str()); } if (str == "\\$readmemh" || str == "\\$readmemb") @@ -2059,12 +2059,12 @@ skip_dynamic_range_lvalue_expansion:; AstNode *node_filename = children[0]->clone(); while (node_filename->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (node_filename->type != AST_CONSTANT) - log_error("Failed to evaluate system function `%s' with non-constant 1st argument at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system function `%s' with non-constant 1st argument.\n", str.c_str()); AstNode *node_memory = children[1]->clone(); while (node_memory->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (node_memory->type != AST_IDENTIFIER || node_memory->id2ast == nullptr || node_memory->id2ast->type != AST_MEMORY) - log_error("Failed to evaluate system function `%s' with non-memory 2nd argument at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system function `%s' with non-memory 2nd argument.\n", str.c_str()); int start_addr = -1, finish_addr = -1; @@ -2072,7 +2072,7 @@ skip_dynamic_range_lvalue_expansion:; AstNode *node_addr = children[2]->clone(); while (node_addr->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (node_addr->type != AST_CONSTANT) - log_error("Failed to evaluate system function `%s' with non-constant 3rd argument at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system function `%s' with non-constant 3rd argument.\n", str.c_str()); start_addr = int(node_addr->asInt(false)); } @@ -2080,7 +2080,7 @@ skip_dynamic_range_lvalue_expansion:; AstNode *node_addr = children[3]->clone(); while (node_addr->simplify(true, false, false, stage, width_hint, sign_hint, false)) { } if (node_addr->type != AST_CONSTANT) - log_error("Failed to evaluate system function `%s' with non-constant 4th argument at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Failed to evaluate system function `%s' with non-constant 4th argument.\n", str.c_str()); finish_addr = int(node_addr->asInt(false)); } @@ -2106,7 +2106,7 @@ skip_dynamic_range_lvalue_expansion:; } if (current_scope.count(str) == 0 || current_scope[str]->type != AST_TASK) - log_error("Can't resolve task name `%s' at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Can't resolve task name `%s'.\n", str.c_str()); } AstNode *decl = current_scope[str]; @@ -2134,9 +2134,9 @@ skip_dynamic_range_lvalue_expansion:; } if (in_param) - log_error("Non-constant function call in constant expression at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Non-constant function call in constant expression.\n"); if (require_const_eval) - log_error("Function %s can only be called with constant arguments at %s:%d.\n", str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Function %s can only be called with constant arguments.\n", str.c_str()); } size_t arg_count = 0; @@ -2253,7 +2253,7 @@ skip_dynamic_range_lvalue_expansion:; goto tcall_incompatible_wires; } else { tcall_incompatible_wires: - log_error("Incompatible re-declaration of wire %s at %s:%d.\n", child->str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Incompatible re-declaration of wire %s.\n", child->str.c_str()); } } } @@ -2641,7 +2641,7 @@ AstNode *AstNode::readmem(bool is_readmemh, std::string mem_filename, AstNode *m yosys_input_files.insert(mem_filename); if (f.fail()) - log_error("Can not open file `%s` for %s at %s:%d.\n", mem_filename.c_str(), str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Can not open file `%s` for %s.\n", mem_filename.c_str(), str.c_str()); log_assert(GetSize(memory->children) == 2 && memory->children[1]->type == AST_RANGE && memory->children[1]->range_valid); int range_left = memory->children[1]->range_left, range_right = memory->children[1]->range_right; @@ -2687,7 +2687,7 @@ AstNode *AstNode::readmem(bool is_readmemh, std::string mem_filename, AstNode *m char *endptr; cursor = strtol(nptr, &endptr, 16); if (!*nptr || *endptr) - log_error("Can not parse address `%s` for %s at %s:%d.\n", nptr, str.c_str(), filename.c_str(), linenum); + log_file_error(filename, linenum, "Can not parse address `%s` for %s.\n", nptr, str.c_str()); continue; } @@ -2943,7 +2943,7 @@ bool AstNode::mem2reg_check(pool &mem2reg_set) return false; if (children.empty() || children[0]->type != AST_RANGE || GetSize(children[0]->children) != 1) - log_error("Invalid array access at %s:%d.\n", filename.c_str(), linenum); + log_file_error(filename, linenum, "Invalid array access.\n"); return true; } @@ -3446,4 +3446,3 @@ AstNode *AstNode::eval_const_function(AstNode *fcall) } YOSYS_NAMESPACE_END - diff --git a/frontends/verilog/verilog_frontend.cc b/frontends/verilog/verilog_frontend.cc index 505c94619..be925fea2 100644 --- a/frontends/verilog/verilog_frontend.cc +++ b/frontends/verilog/verilog_frontend.cc @@ -42,7 +42,7 @@ static std::list> verilog_defaults_stack; static void error_on_dpi_function(AST::AstNode *node) { if (node->type == AST::AST_DPI_FUNCTION) - log_error("Found DPI function %s at %s:%d.\n", node->str.c_str(), node->filename.c_str(), node->linenum); + log_file_error(node->filename, node->linenum, "Found DPI function %s.\n", node->str.c_str()); for (auto child : node->children) error_on_dpi_function(child); } @@ -519,13 +519,11 @@ void frontend_verilog_yyerror(char const *fmt, ...) va_list ap; char buffer[1024]; char *p = buffer; - p += snprintf(p, buffer + sizeof(buffer) - p, "Parser error in line %s:%d: ", - YOSYS_NAMESPACE_PREFIX AST::current_filename.c_str(), frontend_verilog_yyget_lineno()); va_start(ap, fmt); p += vsnprintf(p, buffer + sizeof(buffer) - p, fmt, ap); va_end(ap); p += snprintf(p, buffer + sizeof(buffer) - p, "\n"); - YOSYS_NAMESPACE_PREFIX log_error("%s", buffer); + YOSYS_NAMESPACE_PREFIX log_file_error(YOSYS_NAMESPACE_PREFIX AST::current_filename, frontend_verilog_yyget_lineno(), + "%s", buffer); exit(1); } -