From: Gustavo Zacarias Date: Tue, 21 Oct 2014 16:39:35 +0000 (-0300) Subject: usb_modeswitch: adjust help X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=b73ff8704c6fda26cb7594dc8409f0dcc8a1e583;p=buildroot.git usb_modeswitch: adjust help The phrasing is a bit off, also there are no WiFi dongles that need this AFAIK. Signed-off-by: Gustavo Zacarias Reviewed-by: "Yann E. MORIN" Signed-off-by: Thomas Petazzoni --- diff --git a/package/usb_modeswitch/Config.in b/package/usb_modeswitch/Config.in index e4c716813b..f709a550c1 100644 --- a/package/usb_modeswitch/Config.in +++ b/package/usb_modeswitch/Config.in @@ -3,16 +3,16 @@ config BR2_PACKAGE_USB_MODESWITCH depends on BR2_TOOLCHAIN_HAS_THREADS # libusb select BR2_PACKAGE_LIBUSB help - Some models of some USB devices such as modems and Wifi - adapters power-up in mass storage mode to provide access to - drivers for the device's application mode. usb_modeswitch + Some USB devices such as 3G/4G broadband modems power-up + in mass storage mode to provide access to drivers + for the device's application mode. usb_modeswitch changes the mode of such devices from the initial power-up - mode to the application mode. Specific configuration data - for each device model is required. + mode to the application mode. + Specific configuration data for each device model is required. usb_modeswitch can be used with the usb_modeswitch_data - package and udev for automatic mode switching when devices - are connected. + package and eudev/systemd for automatic mode switching + when devices are connected. For more information search the Internet for "Virtual CD-ROM switching utility".