From: Alex Deucher Date: Sat, 17 May 2008 00:40:47 +0000 (+1000) Subject: r300: SC register naming cleanup X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ba50c3fed38283968f622d7f47437f56033f09b7;p=mesa.git r300: SC register naming cleanup --- diff --git a/src/mesa/drivers/dri/r300/r300_cmdbuf.c b/src/mesa/drivers/dri/r300/r300_cmdbuf.c index 873f8344fa5..995bfee42a3 100644 --- a/src/mesa/drivers/dri/r300/r300_cmdbuf.c +++ b/src/mesa/drivers/dri/r300/r300_cmdbuf.c @@ -347,7 +347,7 @@ void r300InitCmdBuf(r300ContextPtr r300) ALLOC_STATE(vap_clip_cntl, always, 2, 0); r300->hw.vap_clip_cntl.cmd[0] = cmdpacket0(R300_VAP_CLIP_CNTL, 1); ALLOC_STATE(vap_clip, always, 5, 0); - r300->hw.vap_clip.cmd[0] = cmdpacket0(R300_VAP_CLIP_X_0, 4); + r300->hw.vap_clip.cmd[0] = cmdpacket0(R300_VAP_GB_VERT_CLIP_ADJ, 4); ALLOC_STATE(vap_pvs_vtx_timeout_reg, always, 2, 0); r300->hw.vap_pvs_vtx_timeout_reg.cmd[0] = cmdpacket0(VAP_PVS_VTX_TIMEOUT_REG, 1); } @@ -385,16 +385,16 @@ void r300InitCmdBuf(r300ContextPtr r300) ALLOC_STATE(polygon_mode, always, 4, 0); r300->hw.polygon_mode.cmd[0] = cmdpacket0(R300_GA_POLY_MODE, 3); ALLOC_STATE(fogp, always, 3, 0); - r300->hw.fogp.cmd[0] = cmdpacket0(R300_RE_FOG_SCALE, 2); + r300->hw.fogp.cmd[0] = cmdpacket0(R300_GA_FOG_SCALE, 2); ALLOC_STATE(zbias_cntl, always, 2, 0); - r300->hw.zbias_cntl.cmd[0] = cmdpacket0(R300_RE_ZBIAS_CNTL, 1); + r300->hw.zbias_cntl.cmd[0] = cmdpacket0(R300_SU_TEX_WRAP, 1); ALLOC_STATE(zbs, always, R300_ZBS_CMDSIZE, 0); r300->hw.zbs.cmd[R300_ZBS_CMD_0] = - cmdpacket0(R300_RE_ZBIAS_T_FACTOR, 4); + cmdpacket0(R300_SU_POLY_OFFSET_FRONT_SCALE, 4); ALLOC_STATE(occlusion_cntl, always, 2, 0); - r300->hw.occlusion_cntl.cmd[0] = cmdpacket0(R300_RE_OCCLUSION_CNTL, 1); + r300->hw.occlusion_cntl.cmd[0] = cmdpacket0(R300_SU_POLY_OFFSET_ENABLE, 1); ALLOC_STATE(cul, always, R300_CUL_CMDSIZE, 0); - r300->hw.cul.cmd[R300_CUL_CMD_0] = cmdpacket0(R300_RE_CULL_CNTL, 1); + r300->hw.cul.cmd[R300_CUL_CMD_0] = cmdpacket0(R300_SU_CULL_MODE, 1); ALLOC_STATE(su_depth_scale, always, 3, 0); r300->hw.su_depth_scale.cmd[0] = cmdpacket0(R300_SU_DEPTH_SCALE, 2); ALLOC_STATE(rc, always, R300_RC_CMDSIZE, 0); diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h index 15bc574c13f..b742fabbb50 100644 --- a/src/mesa/drivers/dri/r300/r300_reg.h +++ b/src/mesa/drivers/dri/r300/r300_reg.h @@ -434,10 +434,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * * These registers are called X_QUAD0_1_FL to X_QUAD0_4_FL by glxtest. */ -#define R300_VAP_CLIP_X_0 0x2220 -#define R300_VAP_CLIP_X_1 0x2224 -#define R300_VAP_CLIP_Y_0 0x2228 -#define R300_VAP_CLIP_Y_1 0x222c +#define R300_VAP_GB_VERT_CLIP_ADJ 0x2220 +#define R300_VAP_GB_VERT_DISC_ADJ 0x2224 +#define R300_VAP_GB_HORZ_CLIP_ADJ 0x2228 +#define R300_VAP_GB_HORZ_DISC_ADJ 0x222c /* gap */ @@ -486,6 +486,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_PVS_MAX_CONST_ADDR_SHIFT 16 #define R300_VAP_PVS_CODE_CNTL_1 0x22D8 # define R300_PVS_LAST_VTX_SRC_INST_SHIFT 0 +#define R300_VAP_PVS_FLOW_CNTL_OPC 0x22DC /* The entire range from 0x2300 to 0x2AC inclusive seems to be used for * immediate vertices @@ -1085,9 +1086,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_GA_OFFSET_Y_OFFSET_MASK 0xffff0000 /* Specifies the scale to apply to fog. */ -#define R300_RE_FOG_SCALE 0x4294 +#define R300_GA_FOG_SCALE 0x4294 /* Specifies the offset to apply to fog. */ -#define R300_RE_FOG_START 0x4298 +#define R300_GA_FOG_OFFSET 0x4298 +/* Specifies number of cycles to assert reset, and also causes RB3D soft reset to assert. */ +#define R300_GA_SOFT_RESET 0x429c /* Not sure why there are duplicate of factor and constant values. * My best guess so far is that there are seperate zbiases for test and write. @@ -1095,11 +1098,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * Some of the tests indicate that fgl has a fallback implementation of zbias * via pixel shaders. */ -#define R300_RE_ZBIAS_CNTL 0x42A0 /* GUESS */ -#define R300_RE_ZBIAS_T_FACTOR 0x42A4 -#define R300_RE_ZBIAS_T_CONSTANT 0x42A8 -#define R300_RE_ZBIAS_W_FACTOR 0x42AC -#define R300_RE_ZBIAS_W_CONSTANT 0x42B0 +#define R300_SU_TEX_WRAP 0x42A0 +#define R300_SU_POLY_OFFSET_FRONT_SCALE 0x42A4 +#define R300_SU_POLY_OFFSET_FRONT_OFFSET 0x42A8 +#define R300_SU_POLY_OFFSET_BACK_SCALE 0x42AC +#define R300_SU_POLY_OFFSET_BACK_OFFSET 0x42B0 /* This register needs to be set to (1<<1) for RV350 to correctly * perform depth test (see --vb-triangles in r300_demo) @@ -1110,10 +1113,12 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * One to enable depth test and one for depth write. * Yet this doesnt explain why depth writes work ... */ -#define R300_RE_OCCLUSION_CNTL 0x42B4 -# define R300_OCCLUSION_ON (1<<1) +#define R300_SU_POLY_OFFSET_ENABLE 0x42B4 +# define R300_FRONT_ENABLE (1 << 0) +# define R300_BACK_ENABLE (1 << 1) +# define R300_PARA_ENABLE (1 << 2) -#define R300_RE_CULL_CNTL 0x42B8 +#define R300_SU_CULL_MODE 0x42B8 # define R300_CULL_FRONT (1 << 0) # define R300_CULL_BACK (1 << 1) # define R300_FRONT_FACE_CCW (0 << 2) @@ -1262,6 +1267,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6) # define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6) +#define R300_SC_EDGERULE 0x43a8 /* BEGIN: Scissors and cliprects */ @@ -1279,21 +1285,21 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * For some reason, the top-left corner of the framebuffer is at (1440, 1440) * for the purpose of clipping and scissors. */ -#define R300_RE_CLIPRECT_TL_0 0x43B0 -#define R300_RE_CLIPRECT_BR_0 0x43B4 -#define R300_RE_CLIPRECT_TL_1 0x43B8 -#define R300_RE_CLIPRECT_BR_1 0x43BC -#define R300_RE_CLIPRECT_TL_2 0x43C0 -#define R300_RE_CLIPRECT_BR_2 0x43C4 -#define R300_RE_CLIPRECT_TL_3 0x43C8 -#define R300_RE_CLIPRECT_BR_3 0x43CC +#define R300_SC_CLIPRECT_TL_0 0x43B0 +#define R300_SC_CLIPRECT_BR_0 0x43B4 +#define R300_SC_CLIPRECT_TL_1 0x43B8 +#define R300_SC_CLIPRECT_BR_1 0x43BC +#define R300_SC_CLIPRECT_TL_2 0x43C0 +#define R300_SC_CLIPRECT_BR_2 0x43C4 +#define R300_SC_CLIPRECT_TL_3 0x43C8 +#define R300_SC_CLIPRECT_BR_3 0x43CC # define R300_CLIPRECT_OFFSET 1440 # define R300_CLIPRECT_MASK 0x1FFF # define R300_CLIPRECT_X_SHIFT 0 # define R300_CLIPRECT_X_MASK (0x1FFF << 0) # define R300_CLIPRECT_Y_SHIFT 13 # define R300_CLIPRECT_Y_MASK (0x1FFF << 13) -#define R300_RE_CLIPRECT_CNTL 0x43D0 +#define R300_SC_CLIP_RULE 0x43D0 # define R300_CLIP_OUT (1 << 0) # define R300_CLIP_0 (1 << 1) # define R300_CLIP_1 (1 << 2) @@ -1313,8 +1319,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* gap */ -#define R300_RE_SCISSORS_TL 0x43E0 -#define R300_RE_SCISSORS_BR 0x43E4 +#define R300_SC_SCISSORS_TL 0x43E0 +#define R300_SC_SCISSORS_BR 0x43E4 # define R300_SCISSORS_OFFSET 1440 # define R300_SCISSORS_X_SHIFT 0 # define R300_SCISSORS_X_MASK (0x1FFF << 0)