From: Gustavo Zacarias Date: Tue, 10 Nov 2015 11:25:46 +0000 (-0300) Subject: configs/qemu: bump to the latest linux version X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=bb16580a460e971279b29d90065e20d08dbfb615;p=buildroot.git configs/qemu: bump to the latest linux version ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped mpc85xx_basic_defconfig doesn't work with Qemu. Incidentally while cleaning it up it now seems to work fine with newer qemu versions. sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000 driver which works fine. x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains. Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.3 2.3.0 YES OK arm_nuri 3.10.93 2.3.0 NO(1) OK(2) arm_versatile 4.3 2.3.0 YES OK arm_vexpress 4.3 2.3.0 YES OK microblazebe 4.3 2.3.0 YES OK microblazeel 4.3 2.3.0 YES OK mips64el_malta 4.3 2.3.0 YES OK mips64_malta 4.3 2.3.0 YES OK mipsel_malta 4.3 2.3.0 YES OK mips_malta 4.3 2.3.0 YES OK ppc_g3beige 4.3 2.3.0 YES OK ppc_mpc8544ds 4.3 2.3.0 YES OK ppc_virtex_ml507 4.3 2.3.0 NO OK ppc64_pseries 4.3 2.3.0 YES OK sh4 4.3 2.3.0 YES OK sh4eb 4.3 2.3.0 NO(1) OK sparc_ss10 4.3 2.3.0 YES OK sparc64_sun4u 4.3 2.3.0 YES OK sparc_sun4u 4.3 2.3.0 YES OK x86 4.2.6 2.3.0 YES OK(3) x86_64 4.3 2.3.0 YES OK xtensa_lx60 4.3 2.3.0 YES OK (1) - Supposed to work but broken, probably Qemu emulation issue (2) - In like 1/3 runs it fails to start properly (3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues) Signed-off-by: Gustavo Zacarias Signed-off-by: Thomas Petazzoni --- diff --git a/board/qemu/aarch64-virt/linux-4.2.config b/board/qemu/aarch64-virt/linux-4.2.config deleted file mode 100644 index 93cb42f2ea..0000000000 --- a/board/qemu/aarch64-virt/linux-4.2.config +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_TASKSTATS=y -CONFIG_SCHED_AUTOGROUP=y -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_ARCH_VEXPRESS=y -CONFIG_SMP=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_BINFMT_MISC=y -CONFIG_COMPAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_BRIDGE=m -CONFIG_NET_SCHED=y -CONFIG_VSOCKETS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_MACVLAN=y -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_VIRTIO=y -CONFIG_RTC_CLASS=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_MAILBOX=y -CONFIG_PL320_MBOX=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/linux-4.3.config b/board/qemu/aarch64-virt/linux-4.3.config new file mode 100644 index 0000000000..93cb42f2ea --- /dev/null +++ b/board/qemu/aarch64-virt/linux-4.3.config @@ -0,0 +1,56 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_TASKSTATS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_SMP=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_BINFMT_MISC=y +CONFIG_COMPAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_BRIDGE=m +CONFIG_NET_SCHED=y +CONFIG_VSOCKETS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MACVLAN=y +CONFIG_VIRTIO_NET=y +CONFIG_NLMON=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_RTC_CLASS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/readme.txt b/board/qemu/aarch64-virt/readme.txt index 097760c624..d43fe09f75 100644 --- a/board/qemu/aarch64-virt/readme.txt +++ b/board/qemu/aarch64-virt/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt index d7a642828d..df07a5c3a2 100644 --- a/board/qemu/arm-nuri/readme.txt +++ b/board/qemu/arm-nuri/readme.txt @@ -8,4 +8,4 @@ graphical window is the framebuffer. Startup time is slow because of the SMP CPU emulation so be patient. This emulation is known to be flaky. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/arm-versatile/linux-4.2.config b/board/qemu/arm-versatile/linux-4.2.config deleted file mode 100644 index 9a1ae58c2d..0000000000 --- a/board/qemu/arm-versatile/linux-4.2.config +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_VERSATILE=y -CONFIG_MACH_VERSATILE_AB=y -CONFIG_PCI=y -CONFIG_AEABI=y -CONFIG_USE_OF=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_PHYLIB=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_EXT4_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/linux-4.3.config b/board/qemu/arm-versatile/linux-4.3.config new file mode 100644 index 0000000000..9a1ae58c2d --- /dev/null +++ b/board/qemu/arm-versatile/linux-4.3.config @@ -0,0 +1,43 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_ARCH_VERSATILE=y +CONFIG_MACH_VERSATILE_AB=y +CONFIG_PCI=y +CONFIG_AEABI=y +CONFIG_USE_OF=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_PHYLIB=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt index af65d05ec1..1812994219 100644 --- a/board/qemu/arm-versatile/readme.txt +++ b/board/qemu/arm-versatile/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt index c8f24be12f..a3dc6e4999 100644 --- a/board/qemu/arm-vexpress/readme.txt +++ b/board/qemu/arm-vexpress/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/microblazebe-mmu/linux-4.2.config b/board/qemu/microblazebe-mmu/linux-4.2.config deleted file mode 100644 index 6b4ff22279..0000000000 --- a/board/qemu/microblazebe-mmu/linux-4.2.config +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OPT_LIB_ASM=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set diff --git a/board/qemu/microblazebe-mmu/linux-4.3.config b/board/qemu/microblazebe-mmu/linux-4.3.config new file mode 100644 index 0000000000..6b4ff22279 --- /dev/null +++ b/board/qemu/microblazebe-mmu/linux-4.3.config @@ -0,0 +1,19 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OPT_LIB_ASM=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt index 9f93ab57da..9ade6fb3d7 100644 --- a/board/qemu/microblazebe-mmu/readme.txt +++ b/board/qemu/microblazebe-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/microblazeel-mmu/linux-4.2.config b/board/qemu/microblazeel-mmu/linux-4.2.config deleted file mode 100644 index c7d6b305ba..0000000000 --- a/board/qemu/microblazeel-mmu/linux-4.2.config +++ /dev/null @@ -1,18 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set diff --git a/board/qemu/microblazeel-mmu/linux-4.3.config b/board/qemu/microblazeel-mmu/linux-4.3.config new file mode 100644 index 0000000000..c7d6b305ba --- /dev/null +++ b/board/qemu/microblazeel-mmu/linux-4.3.config @@ -0,0 +1,18 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt index 230527da24..005ea63961 100644 --- a/board/qemu/microblazeel-mmu/readme.txt +++ b/board/qemu/microblazeel-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/mips-malta/linux-4.2.config b/board/qemu/mips-malta/linux-4.2.config deleted file mode 100644 index 3a26ac830f..0000000000 --- a/board/qemu/mips-malta/linux-4.2.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips-malta/linux-4.3.config b/board/qemu/mips-malta/linux-4.3.config new file mode 100644 index 0000000000..3a26ac830f --- /dev/null +++ b/board/qemu/mips-malta/linux-4.3.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt index 2c960597a8..96c952c669 100644 --- a/board/qemu/mips-malta/readme.txt +++ b/board/qemu/mips-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/mips64-malta/linux-4.2.config b/board/qemu/mips64-malta/linux-4.2.config deleted file mode 100644 index cd0b560634..0000000000 --- a/board/qemu/mips64-malta/linux-4.2.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/linux-4.3.config b/board/qemu/mips64-malta/linux-4.3.config new file mode 100644 index 0000000000..cd0b560634 --- /dev/null +++ b/board/qemu/mips64-malta/linux-4.3.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt index 80c9310e13..9aa7aa1bbc 100644 --- a/board/qemu/mips64-malta/readme.txt +++ b/board/qemu/mips64-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/mips64el-malta/linux-4.2.config b/board/qemu/mips64el-malta/linux-4.2.config deleted file mode 100644 index c6b46d4d7f..0000000000 --- a/board/qemu/mips64el-malta/linux-4.2.config +++ /dev/null @@ -1,35 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/linux-4.3.config b/board/qemu/mips64el-malta/linux-4.3.config new file mode 100644 index 0000000000..c6b46d4d7f --- /dev/null +++ b/board/qemu/mips64el-malta/linux-4.3.config @@ -0,0 +1,35 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/readme.txt b/board/qemu/mips64el-malta/readme.txt index 82ab88358f..d6da29bcec 100644 --- a/board/qemu/mips64el-malta/readme.txt +++ b/board/qemu/mips64el-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/mipsel-malta/linux-4.2.config b/board/qemu/mipsel-malta/linux-4.2.config deleted file mode 100644 index 79d7352474..0000000000 --- a/board/qemu/mipsel-malta/linux-4.2.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mipsel-malta/linux-4.3.config b/board/qemu/mipsel-malta/linux-4.3.config new file mode 100644 index 0000000000..79d7352474 --- /dev/null +++ b/board/qemu/mipsel-malta/linux-4.3.config @@ -0,0 +1,31 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt index a77eb88625..7dbb50bb7f 100644 --- a/board/qemu/mipsel-malta/readme.txt +++ b/board/qemu/mipsel-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/ppc-g3beige/linux-4.2.config b/board/qemu/ppc-g3beige/linux-4.2.config deleted file mode 100644 index 7994553544..0000000000 --- a/board/qemu/ppc-g3beige/linux-4.2.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ALTIVEC=y -CONFIG_SYSVIPC=y -CONFIG_HIGHMEM=y -CONFIG_YENTA=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_8139CP=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/linux-4.3.config b/board/qemu/ppc-g3beige/linux-4.3.config new file mode 100644 index 0000000000..7994553544 --- /dev/null +++ b/board/qemu/ppc-g3beige/linux-4.3.config @@ -0,0 +1,25 @@ +CONFIG_ALTIVEC=y +CONFIG_SYSVIPC=y +CONFIG_HIGHMEM=y +CONFIG_YENTA=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_8139CP=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt index cd358b3880..fd19b687b3 100644 --- a/board/qemu/ppc-g3beige/readme.txt +++ b/board/qemu/ppc-g3beige/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/ppc-mpc8544ds/linux-4.3.config b/board/qemu/ppc-mpc8544ds/linux-4.3.config new file mode 100644 index 0000000000..b36847c93d --- /dev/null +++ b/board/qemu/ppc-mpc8544ds/linux-4.3.config @@ -0,0 +1,38 @@ +CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC85xx_DS=y +CONFIG_HIGHMEM=y +CONFIG_MATH_EMULATION=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_TMPFS=y diff --git a/board/qemu/ppc-mpc8544ds/readme.txt b/board/qemu/ppc-mpc8544ds/readme.txt index 8a3374f0f0..0ade52ca75 100644 --- a/board/qemu/ppc-mpc8544ds/readme.txt +++ b/board/qemu/ppc-mpc8544ds/readme.txt @@ -4,5 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.0.2 -QEMU 2.1.x and 2.2.x are known broken. +Tested with QEMU 2.3.0 diff --git a/board/qemu/ppc-virtex-ml507/linux-4.2.config b/board/qemu/ppc-virtex-ml507/linux-4.2.config deleted file mode 100644 index ed4eb792b6..0000000000 --- a/board/qemu/ppc-virtex-ml507/linux-4.2.config +++ /dev/null @@ -1,36 +0,0 @@ -CONFIG_44x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_EBONY is not set -CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y -CONFIG_MATH_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_XILINX_SYSACE=y -CONFIG_NETDEVICES=y -CONFIG_SERIO_XILINX_XPS_PS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_XILINX_HWICAP=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_XILINX=y -CONFIG_FB=y -CONFIG_FB_XILINX=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y diff --git a/board/qemu/ppc-virtex-ml507/linux-4.3.config b/board/qemu/ppc-virtex-ml507/linux-4.3.config new file mode 100644 index 0000000000..ed4eb792b6 --- /dev/null +++ b/board/qemu/ppc-virtex-ml507/linux-4.3.config @@ -0,0 +1,36 @@ +CONFIG_44x=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_EBONY is not set +CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +CONFIG_MATH_EMULATION=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_XILINX_SYSACE=y +CONFIG_NETDEVICES=y +CONFIG_SERIO_XILINX_XPS_PS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_XILINX_HWICAP=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y +CONFIG_FB=y +CONFIG_FB_XILINX=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y diff --git a/board/qemu/ppc-virtex-ml507/readme.txt b/board/qemu/ppc-virtex-ml507/readme.txt index 0cf1f9d266..a25ed482bd 100644 --- a/board/qemu/ppc-virtex-ml507/readme.txt +++ b/board/qemu/ppc-virtex-ml507/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/ppc64-pseries/readme.txt b/board/qemu/ppc64-pseries/readme.txt index 718da6fb15..0dd1682134 100644 --- a/board/qemu/ppc64-pseries/readme.txt +++ b/board/qemu/ppc64-pseries/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/sh4-r2d/linux-4.2.config b/board/qemu/sh4-r2d/linux-4.2.config deleted file mode 100644 index a3d6544549..0000000000 --- a/board/qemu/sh4-r2d/linux-4.2.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4-r2d/linux-4.3.config b/board/qemu/sh4-r2d/linux-4.3.config new file mode 100644 index 0000000000..a3d6544549 --- /dev/null +++ b/board/qemu/sh4-r2d/linux-4.3.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt index b7476b936a..d877bbff7b 100644 --- a/board/qemu/sh4-r2d/readme.txt +++ b/board/qemu/sh4-r2d/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/sh4eb-r2d/linux-4.2.config b/board/qemu/sh4eb-r2d/linux-4.2.config deleted file mode 100644 index 6ead626c41..0000000000 --- a/board/qemu/sh4eb-r2d/linux-4.2.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/linux-4.3.config b/board/qemu/sh4eb-r2d/linux-4.3.config new file mode 100644 index 0000000000..6ead626c41 --- /dev/null +++ b/board/qemu/sh4eb-r2d/linux-4.3.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/readme.txt b/board/qemu/sh4eb-r2d/readme.txt index 23198ba2e4..7f5eec4fd3 100644 --- a/board/qemu/sh4eb-r2d/readme.txt +++ b/board/qemu/sh4eb-r2d/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.4.0.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/sparc-ss10/linux-4.2.config b/board/qemu/sparc-ss10/linux-4.2.config deleted file mode 100644 index cb8d01dc02..0000000000 --- a/board/qemu/sparc-ss10/linux-4.2.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_WIRELESS is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_SUNESP=y -CONFIG_NETDEVICES=y -CONFIG_SUNLANCE=y -# CONFIG_WLAN is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_SERIAL=y -CONFIG_SERIAL_SUNZILOG=y -CONFIG_SERIAL_SUNZILOG_CONSOLE=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_SUN_OPENPROMIO=m -CONFIG_EXT4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/linux-4.3.config b/board/qemu/sparc-ss10/linux-4.3.config new file mode 100644 index 0000000000..cb8d01dc02 --- /dev/null +++ b/board/qemu/sparc-ss10/linux-4.3.config @@ -0,0 +1,31 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_SUNESP=y +CONFIG_NETDEVICES=y +CONFIG_SUNLANCE=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_SUNKBD=y +CONFIG_MOUSE_SERIAL=y +CONFIG_SERIAL_SUNZILOG=y +CONFIG_SERIAL_SUNZILOG_CONSOLE=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_SUN_OPENPROMIO=m +CONFIG_EXT4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt index 1972a117bc..1e2738077f 100644 --- a/board/qemu/sparc-ss10/readme.txt +++ b/board/qemu/sparc-ss10/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/sparc64-sun4u/linux-4.1.config b/board/qemu/sparc64-sun4u/linux-4.1.config deleted file mode 100644 index 2b282f9ae4..0000000000 --- a/board/qemu/sparc64-sun4u/linux-4.1.config +++ /dev/null @@ -1,27 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_EMBEDDED=y -CONFIG_MODULES=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_CMD64X=y -CONFIG_NETDEVICES=y -CONFIG_NE2K_PCI=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT23=y -CONFIG_TMPFS=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/linux-4.3.config b/board/qemu/sparc64-sun4u/linux-4.3.config new file mode 100644 index 0000000000..7eda705a44 --- /dev/null +++ b/board/qemu/sparc64-sun4u/linux-4.3.config @@ -0,0 +1,25 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_CMD64X=y +CONFIG_NETDEVICES=y +CONFIG_E1000_PCI=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/readme.txt b/board/qemu/sparc64-sun4u/readme.txt index 90d1edc29e..9b37394596 100644 --- a/board/qemu/sparc64-sun4u/readme.txt +++ b/board/qemu/sparc64-sun4u/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio output/images/rootfs.ext2 + qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio output/images/rootfs.ext2 -net nic,model=e1000 -net user The login prompt will appear in the terminal that started Qemu. diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt index 85d5c60254..daf62f4fee 100644 --- a/board/qemu/x86/readme.txt +++ b/board/qemu/x86/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/x86_64/linux-4.2.config b/board/qemu/x86_64/linux-4.2.config deleted file mode 100644 index 20726c3dc4..0000000000 --- a/board/qemu/x86_64/linux-4.2.config +++ /dev/null @@ -1,23 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -CONFIG_SND_HDA_GENERIC=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_DRM=y -CONFIG_DRM_QXL=y diff --git a/board/qemu/x86_64/linux-4.3.config b/board/qemu/x86_64/linux-4.3.config new file mode 100644 index 0000000000..20726c3dc4 --- /dev/null +++ b/board/qemu/x86_64/linux-4.3.config @@ -0,0 +1,23 @@ +CONFIG_SYSVIPC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_DRM=y +CONFIG_DRM_QXL=y diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt index d397a79f09..cfd52eec25 100644 --- a/board/qemu/x86_64/readme.txt +++ b/board/qemu/x86_64/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/board/qemu/xtensa-lx60/linux-4.2.config b/board/qemu/xtensa-lx60/linux-4.2.config deleted file mode 100644 index 51701b20a1..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.2.config +++ /dev/null @@ -1,36 +0,0 @@ -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_DC232B=y -# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,38400" -# CONFIG_COMPACTION is not set -# CONFIG_BOUNCE is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_LD_NO_RELAX=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.3.config b/board/qemu/xtensa-lx60/linux-4.3.config new file mode 100644 index 0000000000..51701b20a1 --- /dev/null +++ b/board/qemu/xtensa-lx60/linux-4.3.config @@ -0,0 +1,36 @@ +# CONFIG_SWAP is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_DC232B=y +# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,38400" +# CONFIG_COMPACTION is not set +# CONFIG_BOUNCE is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_LD_NO_RELAX=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/readme.txt b/board/qemu/xtensa-lx60/readme.txt index 2dad34a75d..04393ea2b0 100644 --- a/board/qemu/xtensa-lx60/readme.txt +++ b/board/qemu/xtensa-lx60/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.2.1 +Tested with QEMU 2.3.0 diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig index 23bd9b2939..c39fd8158b 100644 --- a/configs/qemu_aarch64_virt_defconfig +++ b/configs/qemu_aarch64_virt_defconfig @@ -8,14 +8,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.3.config" diff --git a/configs/qemu_arm_nuri_defconfig b/configs/qemu_arm_nuri_defconfig index dad86382f6..d2e522f82c 100644 --- a/configs/qemu_arm_nuri_defconfig +++ b/configs/qemu_arm_nuri_defconfig @@ -16,12 +16,12 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Lock to 3.10 headers to avoid breaking with newer kernels # Stuck at 3.10.x because there's no Nuri DTS BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.87" +BR2_DEFAULT_KERNEL_VERSION="3.10.92" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.87" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.92" BR2_LINUX_KERNEL_DEFCONFIG="exynos4" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index 9a69c4972f..1ce55d0ef1 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.3.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig index 135812a407..b036c6b650 100644 --- a/configs/qemu_arm_vexpress_defconfig +++ b/configs/qemu_arm_vexpress_defconfig @@ -13,15 +13,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_ZIMAGE=y BR2_LINUX_KERNEL_DTS_SUPPORT=y diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index f623f6c463..5730e4cf65 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.3.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 151e2f1f06..8f95c827ee 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.3.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index 2a2e576a74..94dfb547d9 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig index d5f9cc96f1..88828fe01f 100644 --- a/configs/qemu_mips64el_malta_defconfig +++ b/configs/qemu_mips64el_malta_defconfig @@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips_malta_defconfig b/configs/qemu_mips_malta_defconfig index ffd2cbcdf4..e6f6a956b3 100644 --- a/configs/qemu_mips_malta_defconfig +++ b/configs/qemu_mips_malta_defconfig @@ -6,17 +6,17 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mipsel_malta_defconfig b/configs/qemu_mipsel_malta_defconfig index fb6af7334e..b14e70c643 100644 --- a/configs/qemu_mipsel_malta_defconfig +++ b/configs/qemu_mipsel_malta_defconfig @@ -6,17 +6,17 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig index b337b48e02..97e53b4e6e 100644 --- a/configs/qemu_ppc64_pseries_defconfig +++ b/configs/qemu_ppc64_pseries_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_DEFCONFIG="pseries" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index 538decb5de..ae2ddccda4 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -6,17 +6,17 @@ BR2_powerpc_750=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index d6b8786e69..198f5cd9c5 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -6,16 +6,17 @@ BR2_powerpc_8548=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" -BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig index d82c2dd3be..71f1492d5c 100644 --- a/configs/qemu_ppc_virtex_ml507_defconfig +++ b/configs/qemu_ppc_virtex_ml507_defconfig @@ -6,10 +6,10 @@ BR2_powerpc_440=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Use soft float BR2_SOFT_FLOAT=y @@ -17,9 +17,9 @@ BR2_SOFT_FLOAT=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.3.config" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507" diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig index 951a9a7554..0666ed4ec4 100644 --- a/configs/qemu_sh4_r2d_defconfig +++ b/configs/qemu_sh4_r2d_defconfig @@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.3.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig index 4e6ea97632..6680ee3519 100644 --- a/configs/qemu_sh4eb_r2d_defconfig +++ b/configs/qemu_sh4eb_r2d_defconfig @@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.3.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig index 0bb4b3ec73..828b437ee1 100644 --- a/configs/qemu_sparc64_sun4u_defconfig +++ b/configs/qemu_sparc64_sun4u_defconfig @@ -6,14 +6,14 @@ BR2_sparc_v9=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.1 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.1" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.1.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.3.config" diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index aa063ca9a1..3e6d7b1a69 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -8,15 +8,15 @@ BR2_GLOBAL_PATCH_DIR="board/qemu/sparc-ss10" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.3.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index cf877ae6c2..daf32cd556 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -9,14 +9,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.3.config" diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index 44916721a3..f2e202238d 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -12,12 +12,12 @@ BR2_TARGET_ROOTFS_EXT2=y # Lock to 4.2 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" +BR2_DEFAULT_KERNEL_VERSION="4.2.6" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.2.config" diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig index 5c803da11b..526a111f00 100644 --- a/configs/qemu_xtensa_lx60_defconfig +++ b/configs/qemu_xtensa_lx60_defconfig @@ -14,17 +14,17 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 4.2 headers to avoid breaking with newer kernels +# Lock to 4.3 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="4.2" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y +BR2_DEFAULT_KERNEL_VERSION="4.3" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.2.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.3.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"