From: Oliver McFadden Date: Mon, 21 May 2007 15:51:38 +0000 (+0000) Subject: r300: Removed the R300_RS_INTERP_[0-9]_UNKNOWN (magic) defines. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=bb3558e6517209086cf8426bbe4743da50351158;p=mesa.git r300: Removed the R300_RS_INTERP_[0-9]_UNKNOWN (magic) defines. Supposedly you need to set these values for the interpolaters to work, but they seem to work fine without these values. --- diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h index 0a31f0b9785..e64f5095bc5 100644 --- a/src/mesa/drivers/dri/r300/r300_reg.h +++ b/src/mesa/drivers/dri/r300/r300_reg.h @@ -628,17 +628,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * Set INTERP_USED on all interpolators that produce data used by * the fragment program. INTERP_USED looks like a swizzling mask, * but I haven't seen it used that way. - * - * Note: The _UNKNOWN constants are always set in their respective - * register. I don't know if this is necessary. */ #define R300_RS_INTERP_0 0x4310 #define R300_RS_INTERP_1 0x4314 -# define R300_RS_INTERP_1_UNKNOWN 0x40 #define R300_RS_INTERP_2 0x4318 -# define R300_RS_INTERP_2_UNKNOWN 0x80 #define R300_RS_INTERP_3 0x431C -# define R300_RS_INTERP_3_UNKNOWN 0xC0 #define R300_RS_INTERP_4 0x4320 #define R300_RS_INTERP_5 0x4324 #define R300_RS_INTERP_6 0x4328 diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c index e8d67f9aec1..8a85478f73e 100644 --- a/src/mesa/drivers/dri/r300/r300_state.c +++ b/src/mesa/drivers/dri/r300/r300_state.c @@ -1442,17 +1442,6 @@ union r300_outputs_written { static void r300SetupRSUnit(GLcontext * ctx) { r300ContextPtr r300 = R300_CONTEXT(ctx); - /* I'm still unsure if these are needed */ - GLuint interp_magic[8] = { - 0x00, - R300_RS_INTERP_1_UNKNOWN, - R300_RS_INTERP_2_UNKNOWN, - R300_RS_INTERP_3_UNKNOWN, - 0x00, - 0x00, - 0x00, - 0x00 - }; union r300_outputs_written OutputsWritten; GLuint InputsRead; int fp_reg, high_rr; @@ -1498,8 +1487,7 @@ static void r300SetupRSUnit(GLcontext * ctx) for (i = 0; i < ctx->Const.MaxTextureUnits; i++) { r300->hw.ri.cmd[R300_RI_INTERP_0 + i] = 0 | R300_RS_INTERP_USED - | (in_texcoords << R300_RS_INTERP_SRC_SHIFT) - | interp_magic[i]; + | (in_texcoords << R300_RS_INTERP_SRC_SHIFT); r300->hw.rr.cmd[R300_RR_ROUTE_0 + fp_reg] = 0; if (InputsRead & (FRAG_BIT_TEX0 << i)) {