From: Thomas Petazzoni Date: Mon, 7 Nov 2016 21:01:51 +0000 (+0100) Subject: configs/qmx6: remove defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=be8779da6b8ce7079d2b3ff33d48ba41ddfca27c;p=buildroot.git configs/qmx6: remove defconfig The original submitter and follow-up contributors to the qmx6 defconfig no longer have the hardware available or the time/interest to update this defconfig, which currently fails to build with gcc 5.x. Due to this, this commit removes this defconfig. Signed-off-by: Thomas Petazzoni --- diff --git a/board/congatec/qmx6/readme.txt b/board/congatec/qmx6/readme.txt deleted file mode 100644 index d2e0dcacbd..0000000000 --- a/board/congatec/qmx6/readme.txt +++ /dev/null @@ -1,36 +0,0 @@ -This is the minimal buildroot support for the Congatec QMX6 Qseven CoM - -conga-QMX6 is based on the freescale iMX6 SoC. For more information please -have a look at http://www.congatec.com/products/qseven/conga-qmx6.html - -The configuration is based on the currently latest kernel release from -Congatec's git repository which is based on 3.0.35. The bootloader u-boot -is preconfigured on the CPU module and does not need to be replaced. - -To build the default configuration you only have to: - - make qmx6_defconfig && make - -You will need a microSD card of sufficient size and the first or only -partition configured as Linux type. - -To transfer the system to the card do: - - $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1 - -You can optionally extend the filesystem size to the whole partition: - - $ sudo resize2fs /dev/sdX1 - -You can also update the card image without completely rewriting it: - - $ sudo mount /dev/sdX1 /mnt - $ sudo tar xf output/images/rootfs.tar -C /mnt - $ sudo umount /mnt - -Connect a terminal program to the rs232 connector marked "CONSOLE" -with baudrate set to 115200, insert the microSD card into the socket -on the CPU module and power the board to watch the system boot. - -Booting from the SD card slot on the base board is currently not -supported. diff --git a/configs/qmx6_defconfig b/configs/qmx6_defconfig deleted file mode 100644 index cb80cad46d..0000000000 --- a/configs/qmx6_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -# Linux headers same as kernel, a 3.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" - -# Notice you need a recent version of u-boot (with DT support) to be able -# to boot this kernel -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_GIT=y -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/imx6_kernel_3.14.git" -# Last version of branch cgt_qmx6_3.14.28_1.0.0 -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="105820d6bd251deb49c3dd3f71fa0d76adce97c7" -BR2_LINUX_KERNEL_DEFCONFIG="qmx6" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-qmx6" -BR2_LINUX_KERNEL_INSTALL_TARGET=y - -# Change boardname depending of your product number -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BOARDNAME="cgt_qmx6_pn016103" -BR2_TARGET_UBOOT_CUSTOM_GIT=y -BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_uboot.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="4d3b64e93064ed3d97ef7d91ff0f61a693a460fc" -BR2_TARGET_UBOOT_FORMAT_CUSTOM=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.pn016103.imx" - -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_3=y - -BR2_PACKAGE_HOST_UBOOT_TOOLS=y