From: Ian Lance Taylor Date: Thu, 27 May 1999 21:57:48 +0000 (+0000) Subject: 1999-05-28 Martin Dorey X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=bedf545c12aa389c181ee2a071d5e10b6da79c9a;p=binutils-gdb.git 1999-05-28 Martin Dorey * config/tc-i960.c: Several minor changes to add ELF and BFD_ASSEMBLER support. * config/tc-i960.h: Likewise. * configure.in (i960-*-elf*): New target. * aclocal.m4, configure: Rebuild. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index 1ae09ec57c0..5dd75bb2109 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,11 @@ +1999-05-28 Martin Dorey + + * config/tc-i960.c: Several minor changes to add ELF and + BFD_ASSEMBLER support. + * config/tc-i960.h: Likewise. + * configure.in (i960-*-elf*): New target. + * aclocal.m4, configure: Rebuild. + 1999-05-25 Alan Modra * config/tc-i386.c (md_apply_fix3): Only do 1999-05-17 fx_pcrel diff --git a/gas/NEWS b/gas/NEWS index 08440763526..6017d5875c0 100644 --- a/gas/NEWS +++ b/gas/NEWS @@ -22,6 +22,8 @@ Mitsubishi D30V support added. Texas Instruments c80 (tms320c80) support added. +i960 ELF support added. + Changes in 2.9: Texas Instruments c30 (tms320c30) support added. diff --git a/gas/aclocal.m4 b/gas/aclocal.m4 index 1c6d60cb238..ebbe468df4d 100644 --- a/gas/aclocal.m4 +++ b/gas/aclocal.m4 @@ -160,26 +160,58 @@ fi AC_SUBST($1)]) -# serial 25 AM_PROG_LIBTOOL -AC_DEFUN(AM_PROG_LIBTOOL, -[AC_REQUIRE([AM_ENABLE_SHARED])dnl -AC_REQUIRE([AM_ENABLE_STATIC])dnl +# serial 35 AC_PROG_LIBTOOL +AC_DEFUN(AC_PROG_LIBTOOL, +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl + +# Save cache, so that ltconfig can load it +AC_CACHE_SAVE + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ +DLLTOOL="$DLLTOOL" AS="$AS" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +|| AC_MSG_ERROR([libtool configure failed]) + +# Reload cache, that may have been modified by ltconfig +AC_CACHE_LOAD + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log +]) + +AC_DEFUN(AC_LIBTOOL_SETUP, +[AC_PREREQ(2.13)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AM_PROG_LD])dnl -AC_REQUIRE([AM_PROG_NM])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([AC_SYS_NM_PARSE])dnl +AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl # Check for any special flags to pass to ltconfig. -libtool_flags= +libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" @@ -208,37 +240,46 @@ case "$host" in *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; *-*-cygwin*) - AM_SYS_LIBTOOL_CYGWIN + AC_SYS_LIBTOOL_CYGWIN ;; esac -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| AC_MSG_ERROR([libtool configure failed]) +# enable the --disable-libtool-lock switch -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +AC_ARG_ENABLE(libtool-lock, +[ --disable-libtool-lock force libtool not to do file locking], +need_locks=$enableval, +need_locks=yes) + +if test x"$need_locks" = xno; then + libtool_flags="$libtool_flags --disable-lock" +fi ]) -# AM_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AM_ENABLE_SHARED[(DEFAULT)] +# AC_LIBTOOL_DLOPEN - check for dlopen support +AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes]) + +# AC_ENABLE_SHARED - implement the --enable-shared flag +# Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AM_ENABLE_SHARED, -[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_SHARED, +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT], +<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in @@ -256,26 +297,22 @@ no) enable_shared=no ;; IFS="$ac_save_ifs" ;; esac], -enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl +enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) -# AM_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AM_DISABLE_SHARED, -[AM_ENABLE_SHARED(no)]) - -# AM_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AM_DISABLE_STATIC, -[AM_ENABLE_STATIC(no)]) +# AC_DISABLE_SHARED - set the default shared flag to --disable-shared +AC_DEFUN(AC_DISABLE_SHARED, +[AC_ENABLE_SHARED(no)]) -# AM_ENABLE_STATIC - implement the --enable-static flag -# Usage: AM_ENABLE_STATIC[(DEFAULT)] +# AC_ENABLE_STATIC - implement the --enable-static flag +# Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AM_ENABLE_STATIC, -[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_STATIC, +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT], +<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in @@ -293,28 +330,74 @@ no) enable_static=no ;; IFS="$ac_save_ifs" ;; esac], -enable_static=AM_ENABLE_STATIC_DEFAULT)dnl +enable_static=AC_ENABLE_STATIC_DEFAULT)dnl +]) + +# AC_DISABLE_STATIC - set the default static flag to --disable-static +AC_DEFUN(AC_DISABLE_STATIC, +[AC_ENABLE_STATIC(no)]) + + +# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag +# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AC_ENABLE_FAST_INSTALL, +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(fast-install, +changequote(<<, >>)dnl +<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) +# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN(AC_DISABLE_FAST_INSTALL, +[AC_ENABLE_FAST_INSTALL(no)]) -# AM_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AM_PROG_LD, + +# AC_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AC_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC]) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in - # Accept absolute paths. + # Accept absolute paths. changequote(,)dnl - /* | [A-Za-z]:\\*) + /* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' changequote([,])dnl - test -z "$LD" && LD="$ac_prog" - ;; + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -342,7 +425,7 @@ AC_CACHE_VAL(ac_cv_path_LD, if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done @@ -358,10 +441,10 @@ else fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_SUBST(LD) -AM_PROG_LD_GNU +AC_PROG_LD_GNU ]) -AC_DEFUN(AM_PROG_LD_GNU, +AC_DEFUN(AC_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then @@ -371,8 +454,8 @@ else fi]) ]) -# AM_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AM_PROG_NM, +# AC_PROG_NM - find the path to a BSD-compatible name lister +AC_DEFUN(AC_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [if test -n "$NM"; then @@ -380,20 +463,22 @@ AC_CACHE_VAL(ac_cv_path_NM, ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + ac_cv_path_NM="$ac_dir/nm -B" + break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + ac_cv_path_NM="$ac_dir/nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" @@ -404,12 +489,280 @@ AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) -# AM_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin -AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, +# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed +# by C symbol name from nm. +AC_DEFUN(AC_SYS_NM_PARSE, +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_NM])dnl +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output]) +AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe, +[# These are sane defaults that work on at least a few old systems. +# {They come from Ultrix. What could be older than Ultrix?!! ;)} + +changequote(,)dnl +# Character class describing NM global symbol codes. +ac_symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +ac_symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Define system-specific variables. +case "$host_os" in +aix*) + ac_symcode='[BCDT]' + ;; +cygwin* | mingw*) + ac_symcode='[ABCDGISTW]' + ;; +hpux*) + ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" + ;; +irix*) + ac_symcode='[BCDEGRST]' + ;; +solaris*) + ac_symcode='[BDT]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + ac_symcode='[ABCDGISTW]' +fi +changequote([,])dnl + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'" + + # Check to see that the pipe works correctly. + ac_pipe_works=no + rm -f conftest.$ac_ext + cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then + + # Try sorting and uniquifying the output. + if sort "$ac_nlist" | uniq > "$ac_nlist"T; then + mv -f "$ac_nlist"T "$ac_nlist" + else + rm -f "$ac_nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then + if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then + cat < conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c' + + cat <> conftest.c +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +changequote(,)dnl +lt_preloaded_symbols[] = +changequote([,])dnl +{ +EOF + sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftestm.$ac_objext + ac_save_LIBS="$LIBS" + ac_save_CFLAGS="$CFLAGS" + LIBS="conftestm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + ac_pipe_works=yes + else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC + fi + LIBS="$ac_save_LIBS" + CFLAGS="$ac_save_CFLAGS" + else + echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC + fi + else + echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC + fi + rm -rf conftest* + + # Do not use the global_symbol_pipe unless it works. + if test "$ac_pipe_works" = yes; then + if test x"$ac_symprfx" = x"_"; then + ac_cv_sys_symbol_underscore=yes + else + ac_cv_sys_symbol_underscore=no + fi + break + else + ac_cv_sys_global_symbol_pipe= + fi +done +]) + +ac_result=yes +if test -z "$ac_cv_sys_global_symbol_pipe"; then + ac_result=no +fi +AC_MSG_RESULT($ac_result) +]) + +# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin +AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN, [AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) ]) +# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols +# with an underscore? +AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE, +[AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([AC_SYS_NM_PARSE])dnl +AC_MSG_CHECKING([for _ prefix in compiled symbols]) +AC_CACHE_VAL(ac_cv_sys_symbol_underscore, +[ac_cv_sys_symbol_underscore=no +cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then + # See whether the symbols have a leading underscore. + if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then + ac_cv_sys_symbol_underscore=yes + else + if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then + : + else + echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC + fi + fi + else + echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC +fi +rm -rf conftest* +]) +AC_MSG_RESULT($ac_cv_sys_symbol_underscore) +USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no} +AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl +]) + +# AC_CHECK_LIBM - check for math library +AC_DEFUN(AC_CHECK_LIBM, [ +AC_CHECK_LIB(mw, _mwvalidcheckl) +AC_CHECK_LIB(m, cos) +]) + +# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl convenience library, adds --enable-ltdl-convenience to +# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor +# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed +# to be `${top_builddir}/libltdl'. Make sure you start DIR with +# '${top_builddir}/' (note the single quotes!) if your package is not +# flat, and, if you're not using automake, define top_builddir as +# appropriate in the Makefiles. +AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [ + case "$enable_ltdl_convenience" in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la +]) + +# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl installable library, and adds --enable-ltdl-install to +# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor +# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed +# to be `${top_builddir}/libltdl'. Make sure you start DIR with +# '${top_builddir}/' (note the single quotes!) if your package is not +# flat, and, if you're not using automake, define top_builddir as +# appropriate in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [ + AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [ + case "$enable_ltdl_install" in + no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;; + "") enable_ltdl_install=yes + ac_configure_args="$ac_configure_args --enable-ltdl-install" ;; + esac + ]) + if test x"$enable_ltdl_install" != x"no"; then + LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la + fi +]) + +dnl old names +AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl +AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl +AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl +AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl +AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl +AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl +AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl +AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl +AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl +AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl + # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, diff --git a/gas/config/tc-i960.c b/gas/config/tc-i960.c index 936b6621994..a4e8497fc2d 100644 --- a/gas/config/tc-i960.c +++ b/gas/config/tc-i960.c @@ -1,5 +1,5 @@ /* tc-i960.c - All the i80960-specific stuff - Copyright (C) 1989, 90, 91, 92, 93, 94, 95, 96, 97, 1998 + Copyright (C) 1989, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999 Free Software Foundation, Inc. This file is part of GAS. @@ -101,7 +101,22 @@ #define TC_S_FORCE_TO_SYSPROC(s) (S_SET_STORAGE_CLASS((s), C_SCALL)) #else /* ! OBJ_COFF */ -you lose; +#ifdef OBJ_ELF +#define TC_S_IS_SYSPROC(s) 0 + +#define TC_S_IS_BALNAME(s) 0 +#define TC_S_IS_CALLNAME(s) 0 +#define TC_S_IS_BADPROC(s) 0 + +#define TC_S_SET_SYSPROC(s, p) +#define TC_S_GET_SYSPROC(s) 0 + +#define TC_S_FORCE_TO_BALNAME(s) +#define TC_S_FORCE_TO_CALLNAME(s) +#define TC_S_FORCE_TO_SYSPROC(s) +#else + #error COFF, a.out, b.out, and ELF are the only supported formats. +#endif /* ! OBJ_ELF */ #endif /* ! OBJ_COFF */ #endif /* ! OBJ_A/BOUT */ @@ -1009,7 +1024,6 @@ md_show_usage (stream) } -#ifndef BFD_ASSEMBLER /***************************************************************************** md_convert_frag: Called by base assembler after address relaxation is finished: modify @@ -1023,11 +1037,19 @@ md_show_usage (stream) Replace the cobr with a two instructions (a compare and a branch). *************************************************************************** */ +#ifndef BFD_ASSEMBLER void md_convert_frag (headers, seg, fragP) object_headers *headers; segT seg; fragS *fragP; +#else +void +md_convert_frag (abfd, sec, fragP) + bfd *abfd; + segT sec; + fragS *fragP; +#endif { fixS *fixP; /* Structure describing needed address fix */ @@ -1082,6 +1104,7 @@ md_estimate_size_before_relax (fragP, segment_type) return 0; } /* md_estimate_size_before_relax() */ +#if defined(OBJ_AOUT) | defined(OBJ_BOUT) /***************************************************************************** md_ri_to_chars: @@ -1096,7 +1119,8 @@ md_estimate_size_before_relax (fragP, segment_type) does do the reordering (Ian Taylor 28 Aug 92). *************************************************************************** */ -void + +static void md_ri_to_chars (where, ri) char *where; struct relocation_info *ri; @@ -1114,7 +1138,8 @@ md_ri_to_chars (where, ri) | (ri->r_callj << 6)); } -#endif /* BFD_ASSEMBLER */ +#endif /* defined(OBJ_AOUT) | defined(OBJ_BOUT) */ + /* FOLLOWING ARE THE LOCAL ROUTINES, IN ALPHABETICAL ORDER */ @@ -2819,11 +2844,21 @@ md_pcrel_from (fixP) return fixP->fx_where + fixP->fx_frag->fr_address; } +#ifdef BFD_ASSEMBLER +int +md_apply_fix (fixP, valp) + fixS *fixP; + valueT *valp; +#else void md_apply_fix (fixP, val) fixS *fixP; long val; +#endif { +#ifdef BFD_ASSEMBLER + long val = *valp; +#endif char *place = fixP->fx_where + fixP->fx_frag->fr_literal; if (!fixP->fx_bit_fixP) @@ -2833,11 +2868,39 @@ md_apply_fix (fixP, val) if (fixP->fx_bsr) val = 0; +#ifdef OBJ_ELF + /* For ELF, we always emit relocations for external or weak + symbols. */ + if (fixP->fx_addsy != NULL + && (S_IS_EXTERNAL (fixP->fx_addsy) + || S_IS_WEAK (fixP->fx_addsy))) + val = 0; +#endif + fixP->fx_addnumber = val; + +#ifdef BFD_ASSEMBLER + /* HACK: With REL relocations this causes the offset in the code + to be doubled. + + Guess: val is the old offset in the code, addnumber gets + passed back to md_gen_reloc() where it gets assigned to + addend, which the backend then writes back to the code (as + we're using REL, not RELA relocations). COFF must be working + without this hack, but I don't see how or why. + + apeppere and martindo 22-10-1998. */ + fixP->fx_addnumber = 0; +#endif + md_number_to_imm (place, val, fixP->fx_size, fixP); } else md_number_to_field (place, val, fixP->fx_bit_fixP); + +#ifdef BFD_ASSEMBLER + return 0; +#endif } #if defined(OBJ_AOUT) | defined(OBJ_BOUT) @@ -2937,8 +3000,14 @@ md_section_align (seg, addr) segT seg; valueT addr; /* Address to be rounded up */ { - return ((addr + (1 << section_alignment[(int) seg]) - 1) & (-1 << section_alignment[(int) seg])); -} /* md_section_align() */ + int align; +#ifdef BFD_ASSEMBLER + align = bfd_get_section_alignment (stdoutput, seg); +#else + align = section_alignment[(int) seg]; +#endif + return (addr + (1 << align) - 1) & (-1 << align); +} extern int coff_flags; @@ -3007,6 +3076,8 @@ tc_headers_hook (headers) #endif /* OBJ_COFF */ +#ifndef BFD_ASSEMBLER + /* Things going on here: For bout, We need to assure a couple of simplifying @@ -3066,6 +3137,8 @@ tc_crawl_symbol_chain (headers) } /* walk the symbol chain */ } +#endif /* ! BFD_ASSEMBLER */ + /* For aout or bout, the bal immediately follows the call. For coff, we cheat and store a pointer to the bal symbol in the @@ -3105,7 +3178,7 @@ tc_set_bal_of_call (callP, balP) } /* if not in order */ #else /* ! OBJ_ABOUT */ - (as yet unwritten.); + as_fatal ("Only supported for a.out, b.out, or COFF"); #endif /* ! OBJ_ABOUT */ #endif /* ! OBJ_COFF */ } @@ -3124,7 +3197,7 @@ tc_get_bal_of_call (callP) #ifdef OBJ_ABOUT retval = symbol_next (callP); #else - (as yet unwritten.); + as_fatal ("Only supported for a.out, b.out, or COFF"); #endif /* ! OBJ_ABOUT */ #endif /* ! OBJ_COFF */ @@ -3228,4 +3301,67 @@ i960_validate_fix (fixP, this_segment_type, add_symbolPP) return 0; } +#ifdef BFD_ASSEMBLER + +/* From cgen.c: */ + +static short +tc_bfd_fix2rtype (fixP) + fixS *fixP; +{ +#if 0 + if (fixP->fx_bsr) + abort (); +#endif + + if (fixP->fx_pcrel == 0 && fixP->fx_size == 4) + return BFD_RELOC_32; + + if (fixP->fx_pcrel != 0 && fixP->fx_size == 4) + return BFD_RELOC_24_PCREL; + + abort (); + return 0; +} + +/* Translate internal representation of relocation info to BFD target + format. + + FIXME: To what extent can we get all relevant targets to use this? */ + +arelent * +tc_gen_reloc (section, fixP) + asection *section; + fixS *fixP; +{ + arelent * reloc; + + reloc = (arelent *) xmalloc (sizeof (arelent)); + + /* HACK: Is this right? */ + fixP->fx_r_type = tc_bfd_fix2rtype (fixP); + + reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type); + if (reloc->howto == (reloc_howto_type *) NULL) + { + as_bad_where (fixP->fx_file, fixP->fx_line, + "internal error: can't export reloc type %d (`%s')", + fixP->fx_r_type, + bfd_get_reloc_code_name (fixP->fx_r_type)); + return NULL; + } + + assert (!fixP->fx_pcrel == !reloc->howto->pc_relative); + + reloc->sym_ptr_ptr = &fixP->fx_addsy->bsym; + reloc->address = fixP->fx_frag->fr_address + fixP->fx_where; + reloc->addend = fixP->fx_addnumber; + + return reloc; +} + +/* end from cgen.c */ + +#endif /* BFD_ASSEMBLER */ + /* end of tc-i960.c */ diff --git a/gas/config/tc-i960.h b/gas/config/tc-i960.h index f60696751f0..e4152336d90 100644 --- a/gas/config/tc-i960.h +++ b/gas/config/tc-i960.h @@ -1,5 +1,5 @@ /* tc-i960.h - Basic 80960 instruction formats. - Copyright (C) 1989, 90, 91, 92, 93, 94, 95, 96, 97, 1998 + Copyright (C) 1989, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. @@ -22,6 +22,11 @@ #ifndef TC_I960 #define TC_I960 1 +#ifdef OBJ_ELF +#define TARGET_FORMAT "elf32-i960" +#define TARGET_ARCH bfd_arch_i960 +#endif + #define TARGET_BYTES_BIG_ENDIAN 0 #define WORKING_DOT_WORD @@ -139,7 +144,23 @@ extern int i960_validate_fix PARAMS ((struct fix *, segT, struct symbol **)); #define TC_VALIDATE_FIX(FIXP,SEGTYPE,LABEL) \ if (i960_validate_fix (FIXP, SEGTYPE, &add_symbolP) != 0) goto LABEL +#ifdef OBJ_ELF +#define TC_RELOC_RTSYM_LOC_FIXUP(FIX) \ + ((FIX)->fx_addsy == NULL \ + || (! S_IS_EXTERNAL ((FIX)->fx_addsy) \ + && ! S_IS_WEAK ((FIX)->fx_addsy) \ + && S_IS_DEFINED ((FIX)->fx_addsy) \ + && ! S_IS_COMMON ((FIX)->fx_addsy))) +#endif + +#ifndef OBJ_ELF #define tc_fix_adjustable(FIXP) ((FIXP)->fx_bsr == 0) +#else +#define tc_fix_adjustable(FIXP) \ + ((FIXP)->fx_bsr == 0 \ + && ! S_IS_EXTERNAL ((FIXP)->fx_addsy) \ + && ! S_IS_WEAK ((FIXP)->fx_addsy)) +#endif extern void brtab_emit PARAMS ((void)); #define md_end() brtab_emit () diff --git a/gas/configure b/gas/configure index e36a7bdb82e..0b5ecb17f99 100755 --- a/gas/configure +++ b/gas/configure @@ -15,8 +15,12 @@ ac_help="$ac_help --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help --enable-static[=PKGS] build static libraries [default=yes]" +ac_help="$ac_help + --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" +ac_help="$ac_help + --disable-libtool-lock force libtool not to do file locking" ac_help="$ac_help --enable-bfd-assembler use BFD back end for writing object files" ac_help="$ac_help @@ -588,7 +592,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:592: checking host system type" >&5 +echo "configure:596: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -609,7 +613,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:613: checking target system type" >&5 +echo "configure:617: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -627,7 +631,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:631: checking build system type" >&5 +echo "configure:635: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -662,7 +666,7 @@ test "$host_alias" != "$target_alias" && # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:666: checking for a BSD compatible install" >&5 +echo "configure:670: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -715,7 +719,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:719: checking whether build environment is sane" >&5 +echo "configure:723: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -772,7 +776,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:776: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:780: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -818,7 +822,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:822: checking for working aclocal" >&5 +echo "configure:826: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -831,7 +835,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:835: checking for working autoconf" >&5 +echo "configure:839: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -844,7 +848,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:848: checking for working automake" >&5 +echo "configure:852: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -857,7 +861,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:861: checking for working autoheader" >&5 +echo "configure:865: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -870,7 +874,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:874: checking for working makeinfo" >&5 +echo "configure:878: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -930,10 +934,33 @@ else enable_static=yes fi +# Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +case "$enableval" in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_fast_install=yes +fi + # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:937: checking for $ac_word" >&5 +echo "configure:964: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -963,7 +990,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:967: checking for $ac_word" >&5 +echo "configure:994: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -993,7 +1020,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:997: checking for $ac_word" >&5 +echo "configure:1024: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1044,7 +1071,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1048: checking for $ac_word" >&5 +echo "configure:1075: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1076,7 +1103,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1080: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1107: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1087,12 +1114,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1091 "configure" +#line 1118 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1118,12 +1145,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1122: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1149: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1127: checking whether we are using GNU C" >&5 +echo "configure:1154: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1132,7 +1159,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1136: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1151,7 +1178,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1155: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1182: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1190,18 +1217,23 @@ else with_gnu_ld=no fi - ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1199: checking for ld used by GCC" >&5 +echo "configure:1225: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in - # Accept absolute paths. - /* | [A-Za-z]:\\*) - test -z "$LD" && LD="$ac_prog" - ;; + # Accept absolute paths. + /* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -1213,10 +1245,10 @@ echo "configure:1199: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1217: checking for GNU ld" >&5 +echo "configure:1249: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1220: checking for non-GNU ld" >&5 +echo "configure:1252: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1233,7 +1265,7 @@ else if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done @@ -1252,7 +1284,7 @@ fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1256: checking if the linker ($LD) is GNU ld" >&5 +echo "configure:1288: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1268,7 +1300,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1272: checking for BSD-compatible nm" >&5 +echo "configure:1304: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1277,20 +1309,22 @@ else ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + ac_cv_path_NM="$ac_dir/nm -B" + break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + ac_cv_path_NM="$ac_dir/nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" @@ -1302,8 +1336,212 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 +echo "configure:1342: checking command to parse $NM output" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # These are sane defaults that work on at least a few old systems. +# {They come from Ultrix. What could be older than Ultrix?!! ;)} + +# Character class describing NM global symbol codes. +ac_symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +ac_symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Define system-specific variables. +case "$host_os" in +aix*) + ac_symcode='[BCDT]' + ;; +cygwin* | mingw*) + ac_symcode='[ABCDGISTW]' + ;; +hpux*) + ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" + ;; +irix*) + ac_symcode='[BCDEGRST]' + ;; +solaris*) + ac_symcode='[BDT]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + ac_symcode='[ABCDGISTW]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'" + + # Check to see that the pipe works correctly. + ac_pipe_works=no + rm -f conftest.$ac_ext + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + # Now try to grab the symbols. + ac_nlist=conftest.nm + + if { (eval echo configure:1409: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then + + # Try sorting and uniquifying the output. + if sort "$ac_nlist" | uniq > "$ac_nlist"T; then + mv -f "$ac_nlist"T "$ac_nlist" + else + rm -f "$ac_nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then + if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then + cat < conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c' + + cat <> conftest.c +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftestm.$ac_objext + ac_save_LIBS="$LIBS" + ac_save_CFLAGS="$CFLAGS" + LIBS="conftestm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo configure:1461: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + ac_pipe_works=yes + else + echo "configure: failed program was:" >&5 + cat conftest.c >&5 + fi + LIBS="$ac_save_LIBS" + CFLAGS="$ac_save_CFLAGS" + else + echo "cannot find nm_test_func in $ac_nlist" >&5 + fi + else + echo "cannot find nm_test_var in $ac_nlist" >&5 + fi + else + echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + rm -rf conftest* + + # Do not use the global_symbol_pipe unless it works. + if test "$ac_pipe_works" = yes; then + if test x"$ac_symprfx" = x"_"; then + ac_cv_sys_symbol_underscore=yes + else + ac_cv_sys_symbol_underscore=no + fi + break + else + ac_cv_sys_global_symbol_pipe= + fi +done + +fi + + +ac_result=yes +if test -z "$ac_cv_sys_global_symbol_pipe"; then + ac_result=no +fi +echo "$ac_t""$ac_result" 1>&6 + +echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6 +echo "configure:1507: checking for _ prefix in compiled symbols" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_symbol_underscore=no +cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + # Now try to grab the symbols. + ac_nlist=conftest.nm + if { (eval echo configure:1519: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then + # See whether the symbols have a leading underscore. + if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then + ac_cv_sys_symbol_underscore=yes + else + if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then + : + else + echo "configure: cannot find nm_test_func in $ac_nlist" >&5 + fi + fi + else + echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5 + fi +else + echo "configure: failed program was:" >&5 + cat conftest.c >&5 +fi +rm -rf conftest* + +fi + +echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6 +USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no} + echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1307: checking whether ln -s works" >&5 +echo "configure:1545: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1329,13 +1567,13 @@ else ac_tool_prefix= fi -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Check for any special flags to pass to ltconfig. -libtool_flags= +libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" @@ -1345,8 +1583,8 @@ test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1349 "configure"' > conftest.$ac_ext - if { (eval echo configure:1350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1587 "configure"' > conftest.$ac_ext + if { (eval echo configure:1588: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1364,14 +1602,45 @@ case "$host" in *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" + echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 +echo "configure:1609: checking whether the C compiler needs -belf" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_cc_needs_belf=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_cc_needs_belf=no +fi +rm -f conftest* +fi + +echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; *-*-cygwin*) # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1375: checking for $ac_word" >&5 +echo "configure:1644: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1403,7 +1672,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1407: checking for $ac_word" >&5 +echo "configure:1676: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1438,7 +1707,7 @@ fi # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1442: checking for $ac_word" >&5 +echo "configure:1711: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1470,7 +1739,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1474: checking for $ac_word" >&5 +echo "configure:1743: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1507,6 +1776,71 @@ fi esac +# enable the --disable-libtool-lock switch + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + need_locks=$enableval +else + need_locks=yes +fi + + +if test x"$need_locks" = xno; then + libtool_flags="$libtool_flags --disable-lock" +fi + + +# Save cache, so that ltconfig can load it +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + + # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ @@ -1515,6 +1849,22 @@ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } +# Reload cache, that may have been modified by ltconfig +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log @@ -1733,6 +2083,7 @@ EOF i960-*-vxworks5.0) fmt=bout ;; i960-*-vxworks5.*) fmt=coff em=ic960 ;; i960-*-vxworks*) fmt=bout ;; + i960-*-elf*) fmt=elf ;; m32r-*-*) fmt=elf bfd_gas=yes ;; @@ -2307,7 +2658,7 @@ EOF # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2311: checking for $ac_word" >&5 +echo "configure:2662: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2337,7 +2688,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2341: checking for $ac_word" >&5 +echo "configure:2692: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2388,7 +2739,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2392: checking for $ac_word" >&5 +echo "configure:2743: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2420,7 +2771,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2424: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2775: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2431,12 +2782,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 2435 "configure" +#line 2786 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:2440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2462,12 +2813,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2466: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2817: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2471: checking whether we are using GNU C" >&5 +echo "configure:2822: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2476,7 +2827,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2480: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2495,7 +2846,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2499: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2850: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2532,7 +2883,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2536: checking for $ac_word" >&5 +echo "configure:2887: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2563,7 +2914,7 @@ done test -n "$YACC" || YACC="yacc" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2567: checking how to run the C preprocessor" >&5 +echo "configure:2918: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2578,13 +2929,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2588: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2595,13 +2946,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2605: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2612,13 +2963,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2622: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2648,7 +2999,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2652: checking for $ac_word" >&5 +echo "configure:3003: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2681,7 +3032,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex"" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2685: checking for $ac_word" >&5 +echo "configure:3036: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2715,7 +3066,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:2719: checking for yywrap in -l$ac_lib" >&5 +echo "configure:3070: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2723,7 +3074,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2757,7 +3108,7 @@ fi fi echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:2761: checking lex output file root" >&5 +echo "configure:3112: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2778,7 +3129,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:2782: checking whether yytext is a pointer" >&5 +echo "configure:3133: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2790,14 +3141,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3152: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else @@ -2821,7 +3172,7 @@ fi ALL_LINGUAS= echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:2825: checking for POSIXized ISC" >&5 +echo "configure:3176: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -2842,12 +3193,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2846: checking for ANSI C header files" >&5 +echo "configure:3197: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2855,7 +3206,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3210: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2872,7 +3223,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2890,7 +3241,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2911,7 +3262,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -2922,7 +3273,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:2926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -2946,12 +3297,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:2950: checking for working const" >&5 +echo "configure:3301: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3355: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -3021,21 +3372,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:3025: checking for inline" >&5 +echo "configure:3376: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -3061,12 +3412,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:3065: checking for off_t" >&5 +echo "configure:3416: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3094,12 +3445,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:3098: checking for size_t" >&5 +echo "configure:3449: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3129,19 +3480,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:3133: checking for working alloca.h" >&5 +echo "configure:3484: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3162,12 +3513,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3166: checking for alloca" >&5 +echo "configure:3517: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -3227,12 +3578,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:3231: checking whether alloca needs Cray hooks" >&5 +echo "configure:3582: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3261: checking for $ac_func" >&5 +echo "configure:3612: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3640: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3312,7 +3663,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:3316: checking stack direction for C alloca" >&5 +echo "configure:3667: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3320,7 +3671,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -3364,17 +3715,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3368: checking for $ac_hdr" >&5 +echo "configure:3719: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3378: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3729: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3403,12 +3754,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3407: checking for $ac_func" >&5 +echo "configure:3758: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3456,7 +3807,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:3460: checking for working mmap" >&5 +echo "configure:3811: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3464,7 +3815,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3632,17 +3983,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3636: checking for $ac_hdr" >&5 +echo "configure:3987: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3672,12 +4023,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3676: checking for $ac_func" >&5 +echo "configure:4027: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3729,12 +4080,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3733: checking for $ac_func" >&5 +echo "configure:4084: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3791,19 +4142,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3795: checking for LC_MESSAGES" >&5 +echo "configure:4146: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3824,7 +4175,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3828: checking whether NLS is requested" >&5 +echo "configure:4179: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3844,7 +4195,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3848: checking whether included gettext is requested" >&5 +echo "configure:4199: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3863,17 +4214,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3867: checking for libintl.h" >&5 +echo "configure:4218: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3890,19 +4241,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:3894: checking for gettext in libc" >&5 +echo "configure:4245: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:3906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -3918,7 +4269,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:3922: checking for bindtextdomain in -lintl" >&5 +echo "configure:4273: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3926,7 +4277,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3953,19 +4304,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:3957: checking for gettext in libintl" >&5 +echo "configure:4308: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -3993,7 +4344,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3997: checking for $ac_word" >&5 +echo "configure:4348: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4027,12 +4378,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4031: checking for $ac_func" >&5 +echo "configure:4382: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4082,7 +4433,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4086: checking for $ac_word" >&5 +echo "configure:4437: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4118,7 +4469,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4122: checking for $ac_word" >&5 +echo "configure:4473: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4150,7 +4501,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -4190,7 +4541,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4194: checking for $ac_word" >&5 +echo "configure:4545: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4224,7 +4575,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4228: checking for $ac_word" >&5 +echo "configure:4579: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4260,7 +4611,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4264: checking for $ac_word" >&5 +echo "configure:4615: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4350,7 +4701,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:4354: checking for catalogs to be installed" >&5 +echo "configure:4705: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -4378,17 +4729,17 @@ echo "configure:4354: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:4382: checking for linux/version.h" >&5 +echo "configure:4733: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4392: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4451,7 +4802,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4455: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4806: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4474,12 +4825,12 @@ fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:4478: checking for Cygwin environment" >&5 +echo "configure:4829: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4845: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -4507,19 +4858,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:4511: checking for mingw32 environment" >&5 +echo "configure:4862: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -4538,7 +4889,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4542: checking for executable suffix" >&5 +echo "configure:4893: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4548,10 +4899,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:4552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:4903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj) ;; + *.c | *.o | *.obj | *.ilk | *.pdb) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -4573,17 +4924,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4577: checking for $ac_hdr" >&5 +echo "configure:4928: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4587: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4938: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4613,7 +4964,7 @@ done # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6 -echo "configure:4617: checking whether compiling a cross-assembler" >&5 +echo "configure:4968: checking whether compiling a cross-assembler" >&5 if test "${host}" = "${target}"; then cross_gas=no else @@ -4628,19 +4979,19 @@ echo "$ac_t""$cross_gas" 1>&6 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:4632: checking for working alloca.h" >&5 +echo "configure:4983: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:4644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -4661,12 +5012,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:4665: checking for alloca" >&5 +echo "configure:5016: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -4726,12 +5077,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:4730: checking whether alloca needs Cray hooks" >&5 +echo "configure:5081: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4760: checking for $ac_func" >&5 +echo "configure:5111: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4811,7 +5162,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:4815: checking stack direction for C alloca" >&5 +echo "configure:5166: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4819,7 +5170,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -4860,21 +5211,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:4864: checking for inline" >&5 +echo "configure:5215: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5229: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -4904,12 +5255,12 @@ esac for ac_func in unlink remove do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4908: checking for $ac_func" >&5 +echo "configure:5259: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4961,12 +5312,12 @@ done for ac_func in sbrk do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4965: checking for $ac_func" >&5 +echo "configure:5316: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5344: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5018,12 +5369,12 @@ done # enough, but on some of those systems, the assert macro relies on requoting # working properly! echo $ac_n "checking for working assert macro""... $ac_c" 1>&6 -echo "configure:5022: checking for working assert macro" >&5 +echo "configure:5373: checking for working assert macro" >&5 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -5039,7 +5390,7 @@ assert (a == b ; return 0; } EOF -if { (eval echo configure:5043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_assert_ok=yes else @@ -5080,12 +5431,12 @@ gas_test_headers=" " echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6 -echo "configure:5084: checking whether declaration is required for strstr" >&5 +echo "configure:5435: checking whether declaration is required for strstr" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_strstr=no else @@ -5117,12 +5468,12 @@ fi echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6 -echo "configure:5121: checking whether declaration is required for malloc" >&5 +echo "configure:5472: checking whether declaration is required for malloc" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_malloc=no else @@ -5154,12 +5505,12 @@ fi echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6 -echo "configure:5158: checking whether declaration is required for free" >&5 +echo "configure:5509: checking whether declaration is required for free" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_free=no else @@ -5191,12 +5542,12 @@ fi echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6 -echo "configure:5195: checking whether declaration is required for sbrk" >&5 +echo "configure:5546: checking whether declaration is required for sbrk" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5562: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_sbrk=no else @@ -5228,12 +5579,12 @@ fi echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6 -echo "configure:5232: checking whether declaration is required for environ" >&5 +echo "configure:5583: checking whether declaration is required for environ" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_environ=no else @@ -5268,12 +5619,12 @@ fi # for it? echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6 -echo "configure:5272: checking whether declaration is required for errno" >&5 +echo "configure:5623: checking whether declaration is required for errno" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_errno=no else @@ -5473,10 +5824,11 @@ s%@RANLIB@%$RANLIB%g s%@CC@%$CC%g s%@LD@%$LD%g s%@NM@%$NM%g +s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g s%@LN_S@%$LN_S%g -s%@LIBTOOL@%$LIBTOOL%g s%@DLLTOOL@%$DLLTOOL%g s%@AS@%$AS%g +s%@LIBTOOL@%$LIBTOOL%g s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g s%@extra_objects@%$extra_objects%g s%@target_cpu_type@%$target_cpu_type%g diff --git a/gas/configure.in b/gas/configure.in index 96afd681ee0..f022063273e 100644 --- a/gas/configure.in +++ b/gas/configure.in @@ -209,6 +209,7 @@ changequote([,])dnl i960-*-vxworks5.0) fmt=bout ;; i960-*-vxworks5.*) fmt=coff em=ic960 ;; i960-*-vxworks*) fmt=bout ;; + i960-*-elf*) fmt=elf ;; m32r-*-*) fmt=elf bfd_gas=yes ;;