From: Andrey Miroshnikov <andrey@technepisteme.xyz>
Date: Tue, 11 Jan 2022 23:33:47 +0000 (+0000)
Subject: GPIO extension almost working, input still needs fix to the set function
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=befdfb6b5be9bfcffd9ef0b033d23e639afcace7;p=pinmux.git

GPIO extension almost working, input still needs fix to the set function
---

diff --git a/src/spec/simple_gpio.py b/src/spec/simple_gpio.py
index c6196bc..8891e16 100644
--- a/src/spec/simple_gpio.py
+++ b/src/spec/simple_gpio.py
@@ -17,8 +17,17 @@ cxxsim = False
 if cxxsim:
     from nmigen.sim.cxxsim import Simulator, Settle
 else:
-    from nmigen.back.pysim import Simulator, Settle
-
+    from nmigen.sim import Simulator, Settle
+
+# Bit shift position for CSR word used in WB transactions
+IADDRSHIFT = 8 # offset needed to tell WB to return input ONLY
+# Layout of 16-bit configuration word (? is unused):
+# ? ? ? i | bank_select[3:0] |? pden puen opendrain |? ien oe o
+ISHIFT = 12
+BANKSHIFT = 8
+# Pull-up/down, open-drain, ien have been skipped for now
+OESHIFT = 1
+OSHIFT = 0
 
 class SimpleGPIO(Elaboratable):
 
@@ -30,7 +39,8 @@ class SimpleGPIO(Elaboratable):
         spec.mask_wid = 4
         spec.reg_wid = 32
         self.bus = Record(make_wb_layout(spec), name="gpio_wb")
-        self.bank_sel = Array([Signal(3) for _ in range(n_gpio)])
+        # ONLY ONE BANK FOR ALL GPIOs atm...
+        self.bank_sel = Signal(4) # set maximum number of banks to 16
         self.gpio_o = Signal(n_gpio)
         self.gpio_oe = Signal(n_gpio)
         self.gpio_i = Signal(n_gpio)
@@ -52,12 +62,10 @@ class SimpleGPIO(Elaboratable):
         comb += wb_ack.eq(0)
 
         gpio_addr = Signal(log2_int(self.n_gpio))
-        gpio_a = Array(list(gpio_o))
-        bank_sel_list = Array(list(bank_sel))
+        gpio_o_list = Array(list(gpio_o))
         print(bank_sel)
-        print(bank_sel_list)
-        print(gpio_a)
-        gpio_oe_list = Array(list(gpio_o))
+        print(gpio_o_list)
+        gpio_oe_list = Array(list(gpio_oe))
         gpio_i_list = Array(list(gpio_i))
 
         # Address first byte for GPIO (max would be 256 GPIOs)
@@ -66,19 +74,19 @@ class SimpleGPIO(Elaboratable):
             comb += wb_ack.eq(1) # always ack
             comb += gpio_addr.eq(bus.adr[0:8])
             with m.If(bus.we): # write
-                # Write to CSR - direction and bank select
-                sync += gpio_a[gpio_addr].eq(wb_wr_data[0])
-                sync += gpio_oe_list[gpio_addr].eq(wb_wr_data[1])
-                sync += bank_sel_list[gpio_addr].eq(wb_wr_data[5:8])
+                # Write to CSR
+                sync += gpio_o_list[gpio_addr].eq(wb_wr_data[OSHIFT])
+                sync += gpio_oe_list[gpio_addr].eq(wb_wr_data[OESHIFT])
+                sync += bank_sel.eq(wb_wr_data[BANKSHIFT:BANKSHIFT+4])
             with m.Else(): # read
                 # Read the value of the input
                 with m.If(bus.adr[8]):
                     comb += wb_rd_data.eq(gpio_i_list[gpio_addr])
                 # Read the state of CSR bits
                 with m.Else():
-                    comb += wb_rd_data.eq(gpio_o[gpio_addr] 
-                                          + (gpio_oe[gpio_addr] << 1)
-                                          + (bank_sel_list[gpio_addr] << 5))
+                    comb += wb_rd_data.eq((gpio_o_list[gpio_addr] << OSHIFT)
+                                          + (gpio_oe_list[gpio_addr] << OESHIFT)
+                                          + (bank_sel << BANKSHIFT))
                 #comb += wb_rd_data.eq(gpio_a[gpio_addr])
 
         return m
@@ -93,20 +101,64 @@ class SimpleGPIO(Elaboratable):
 
 
 
-def read_gpio(gpio, addr):
-    data = yield from wb_read(gpio.bus, addr)
-    print ("gpio%d" % addr, hex(data), bin(data))
+def gpio_configure(dut, gpio, oe, output=0, bank_sel=0):
+    csr_val = ( (bank_sel << BANKSHIFT)
+              | (oe << OESHIFT)
+              | (output << OSHIFT) )
+              # | (PUEN, PDUN, Open-drain etc...)
+    print("Configuring CSR to {0:x}".format(csr_val))
+    yield from wb_write(dut.bus, gpio, csr_val)
+
+def gpio_rd_csr(dut, gpio):
+    csr_val = yield from wb_read(dut.bus, gpio)
+    print("GPIO{0} | CSR: {1:x}".format(gpio, csr_val))
+    # gpio_parse_csr(csr_val)
+    return data
+
+def gpio_rd_input(dut, gpio):
+    in_val = yield from wb_read(dut.bus, gpio | (1<<IADDRSHIFT))
+    print("GPIO{0} | Input: {1:b}".format(gpio, in_val))
     return data
 
+def gpio_set_out(dut, gpio, output):
+    yield from wb_write(dut.bus, gpio, (output << OSHIFT))
 
-def sim_gpio(gpio):
+def gpio_set_in_pad(dut, gpio, in_val):
+    yield dut.gpio_i.eq(in_val)
+
+
+def sim_gpio(dut):
 
     # GPIO0
-    data = yield from read_gpio(gpio, 0) # read gpio addr  0
+    #data = yield from read_gpio(gpio, 0) # read gpio addr  0
+    #yield from wb_write(gpio.bus, 0, 1) # write gpio addr 0
+    #data = yield from read_gpio(gpio, 0) # read gpio addr  0
+    print(dir(dut))
+    print(dut)
+    num_gpios = len(dut.gpio_o)
+    bank_sel = 3
+    oe = 1
+    output = 0
+    for gpio in range(0, num_gpios):
+        yield from gpio_configure(dut, gpio, oe, output, bank_sel)
     
-    yield from wb_write(gpio.bus, 0, 1) # write gpio addr 0
-
-    data = yield from read_gpio(gpio, 0) # read gpio addr  0
+    for gpio in range(0, num_gpios):
+        yield from gpio_set_out(dut, gpio, 1)
+
+    #for gpio in range(0, num_gpios):
+    #    yield from gpio_set_in_pad(dut, gpio, 1)
+    yield from gpio_set_in_pad(dut, 0, 1)
+    yield
+    yield from gpio_set_in_pad(dut, 1, 1)
+    yield
+    yield from gpio_set_in_pad(dut, 2, 1)
+    yield
+    yield from gpio_set_in_pad(dut, 3, 1)
+    yield
+    yield from gpio_set_in_pad(dut, 2, 0)
+    yield
+
+    print("Finished the simple GPIO block test!")
 
 def test_gpio():