From: Andrew Cagney Date: Mon, 17 Mar 2003 20:06:16 +0000 (+0000) Subject: 2003-03-17 Andrew Cagney X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=bf6bad4b99af732982581d3a676951536794ce75;p=binutils-gdb.git 2003-03-17 Andrew Cagney From Elena Zannoni . Test e500 abi and vector registes. * gdb.arch/e500-regs.c, gdb.arch/e500-regs.exp: New files. * gdb.arch/e500-abi.c, gdb.arch/e500-abi.exp: New files. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 89e2462bf9d..8106815c8ca 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,10 @@ +2003-03-17 Andrew Cagney + + From Elena Zannoni . Test e500 abi and + vector registes. + * gdb.arch/e500-regs.c, gdb.arch/e500-regs.exp: New files. + * gdb.arch/e500-abi.c, gdb.arch/e500-abi.exp: New files. + 2003-03-17 David Carlton * gdb.base/watchpoint.exp (test_watchpoint_and_breakpoint): New diff --git a/gdb/testsuite/gdb.arch/e500-abi.c b/gdb/testsuite/gdb.arch/e500-abi.c new file mode 100644 index 00000000000..e2156124b11 --- /dev/null +++ b/gdb/testsuite/gdb.arch/e500-abi.c @@ -0,0 +1,106 @@ +#include + +/* Test PowerPC SPU extensions. */ + +#define vector __attribute__((vector_size(8))) + +vector unsigned short f_vec; +vector short g_vec; +vector float h_vec; +vector float i_vec; +vector unsigned int l_vec; +vector int m_vec; +vector int n_vec; + +/* dummy variables used in the testfile */ +vector unsigned int a_vec_d = {1, 1}; +vector int b_vec_d = {0, 0}; +vector float c_vec_d = {1.0, 1.0}; +vector unsigned int d_vec_d = {0, 0}; +vector int e_vec_d = {1, 1}; +vector unsigned short f_vec_d = {1, 1, 1, 1}; +vector short g_vec_d = {1, 1, 1, 1}; +vector float h_vec_d = {1.0, 1.0}; +vector float i_vec_d = {2.0, 2.0}; +vector unsigned int l_vec_d = {0, 0}; +vector int m_vec_d = {0, 0}; + + +vector int +vec_func (vector unsigned int a_vec_f, + vector int b_vec_f, + vector float c_vec_f, + vector unsigned int d_vec_f, + vector int e_vec_f, + vector unsigned short f_vec_f, + vector short g_vec_f, + vector float h_vec_f, + vector float i_vec_f, + vector unsigned int l_vec_f, + vector int m_vec_f) +{ + vector int n_vec; + + + int x,y,z; + x = 2; + y = 3; + + z = x + y; + z++; + n_vec = __ev_and(a_vec_f, b_vec_f); + n_vec = __ev_or(c_vec_f, d_vec_f); + n_vec = __ev_or(e_vec_f, f_vec_f); + n_vec = __ev_and(g_vec_f, h_vec_f); + n_vec = __ev_and(i_vec_f, l_vec_f); + n_vec = __ev_or(m_vec_f, a_vec_f); + + return n_vec; +} + +void marker(void) {}; + +int +main (void) +{ + vector unsigned int a_vec; + vector int b_vec; + vector float c_vec; + vector unsigned int d_vec; + vector int e_vec; + + vector int res_vec; + + a_vec = (vector unsigned int)__ev_create_u64 ((uint64_t) 55); + b_vec = __ev_create_s64 ((int64_t) 66); + c_vec = (vector float) __ev_create_fs (3.14F, 2.18F); + d_vec = (vector unsigned int) __ev_create_u32 ((uint32_t) 5, (uint32_t) 4); + e_vec = (vector int) __ev_create_s32 ((int32_t) 5, (int32_t) 6); + f_vec = (vector unsigned short) __ev_create_u16 ((uint16_t) 6, (uint16_t) 6, (uint16_t) 7, (uint16_t) 1); + g_vec = (vector short) __ev_create_s16 ((int16_t) 6, (int16_t) 6, (int16_t) 7, (int16_t) 9); + h_vec = (vector float) __ev_create_sfix32_fs (3.0F, 2.0F); + i_vec = (vector float) __ev_create_ufix32_fs (3.0F, 2.0F); + l_vec = (vector unsigned int) __ev_create_ufix32_u32 (3U, 5U); + m_vec = (vector int) __ev_create_sfix32_s32 (6, 9); + + marker (); + +#if 0 +/* This line is useful for cut-n-paste from a gdb session. */ +vec_func(a_vec,b_vec,c_vec,d_vec,e_vec,f_vec,g_vec,h_vec,i_vec,l_vec,m_vec) +#endif + + res_vec = vec_func (a_vec, /* goes in r3 */ + b_vec, /* goes in r4 */ + c_vec, /* goes in r5 */ + d_vec, /* goes in r6 */ + e_vec, /* goes in r7 */ + f_vec, /* goes in r8 */ + g_vec, /* goes in r9 */ + h_vec, /* goes in r10 */ + i_vec, /* goes in stack */ + l_vec, /* goes in stack */ + m_vec); /* goes in stack */ + + return 0; +} diff --git a/gdb/testsuite/gdb.arch/e500-abi.exp b/gdb/testsuite/gdb.arch/e500-abi.exp new file mode 100644 index 00000000000..0d11ad3e24c --- /dev/null +++ b/gdb/testsuite/gdb.arch/e500-abi.exp @@ -0,0 +1,90 @@ +# Copyright 2003 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu +# + +# Tests for Powerpc e500 ABI + + +if $tracelevel then { + strace $tracelevel +} + +# +# This file uses e500-abi.c for input. +# + +set prms_id 0 +set bug_id 0 + +if ![istarget "powerpc-*eabispe"] then { + verbose "Skipping e500 abi tests." + return +} + +set testfile "e500-abi" +set binfile ${objdir}/${subdir}/${testfile} + +set src1 ${srcdir}/${subdir}/${testfile}.c + +if { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +# +# Run to `main' where we begin our tests. +# + +if ![runto_main] then { + gdb_suppress_tests +} + +gdb_test "b marker" "Breakpoint 2 at.*file.*e500-abi.c, line \[0-9\]+." "break marker" +gdb_test "continue" "Breakpoint 2.*marker.*e500-abi.c.*" "continue to marker" +gdb_test "finish" "Run till exit from .0.*marker.*at.*e500-abi.c.*main \\(\\) at.*e500-abi.c.*res_vec = vec_func \\(a_vec,.*goes in r3.*" "back to main (1)" + +# now all the arguments of vec_func are initialized + +set pattern "vec_func .a_vec_f=.0, 55., b_vec_f=.0, 66., c_vec_f=.3.14.*2.18.*, d_vec_f=.5, 4., e_vec_f=.5, 6., f_vec_f=.6, 6, 7, 1., g_vec_f=.6, 6, 7, 9., h_vec_f=.3, 2., i_vec_f=.3, 2., l_vec_f=.3, 5., m_vec_f=.6, 9.." + +set pattern1 $pattern +append pattern1 " at.*e500-abi.c.*x = 2;" + +# Now let's call the function. This function has > 8 args, +# the last ones will go on the stack. +gdb_test "p vec_func(a_vec,b_vec,c_vec,d_vec,e_vec,f_vec,g_vec,h_vec,i_vec,l_vec,m_vec)" \ +".\[0-9\]+ = .6, 63." "call inferior function with vectors (1) " + +# Let's call the function again with dummy arguments. This is to clean +# up the contents of the ev registers before the next call. +gdb_test "p vec_func(a_vec_d,b_vec_d,c_vec_d,d_vec_d,e_vec_d,f_vec_d,g_vec_d,h_vec_d,i_vec_d,l_vec_d,m_vec_d)" \ +".\[0-9\]+ = .1, 1." "call inferior function with vectors (2) " + +# Let's step into the function, to see if the args are printed correctly. +gdb_test "step" \ + $pattern1 \ + "step into vec_func" + +# Let's see if the result is returned correctly. +gdb_test "finish" \ + "Run till exit from .0.* at.*e500-abi.c.*main.*res_vec = vec_func .a_vec,.*goes in r3.*Value returned is.*= .6, 63." \ + "vector value returned correctly" diff --git a/gdb/testsuite/gdb.arch/e500-abi.exp~ b/gdb/testsuite/gdb.arch/e500-abi.exp~ new file mode 100644 index 00000000000..ed13f2ae07f --- /dev/null +++ b/gdb/testsuite/gdb.arch/e500-abi.exp~ @@ -0,0 +1,94 @@ +# Copyright 2003 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu +# + +# Tests for Powerpc e500 ABI + + +if $tracelevel then { + strace $tracelevel +} + +# +# This file uses e500-abi.c for input. +# + +set prms_id 0 +set bug_id 0 + +if ![istarget "powerpc-*eabispe"] then { + verbose "Skipping e500 abi tests." + return +} + +set testfile "e500-abi" +set binfile ${objdir}/${subdir}/${testfile} + +set src1 ${srcdir}/${subdir}/${testfile}.c + +if { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +# +# Run to `main' where we begin our tests. +# + +if ![runto_main] then { + gdb_suppress_tests +} + +gdb_test "b marker" "Breakpoint 2 at.*file.*e500-abi.c, line \[0-9\]+." "break marker" +gdb_test "continue" "Breakpoint 2.*marker.*e500-abi.c.*" "continue to marker" +gdb_test "finish" "Run till exit from .0.*marker.*at.*e500-abi.c.*main \\(\\) at.*e500-abi.c.*res_vec = vec_func \\(a_vec,.*goes in r3.*" "back to main (1)" + +# now all the arguments of vec_func are initialized + +set pattern "vec_func .a_vec_f=.0, 55., b_vec_f=.0, 66., c_vec_f=.3.14.*2.18.*, d_vec_f=.5, 4., e_vec_f=.5, 6., f_vec_f=.6, 6, 7, 1., g_vec_f=.6, 6, 7, 9., h_vec_f=.3, 2., i_vec_f=.3, 2., l_vec_f=.3, 5., m_vec_f=.6, 9.." + +set pattern1 $pattern +append pattern1 " at.*e500-abi.c.*x = 2;" + +# Now let's call the function. This function has > 8 args, +# the last ones will go on the stack. +gdb_test "p vec_func(a_vec,b_vec,c_vec,d_vec,e_vec,f_vec,g_vec,h_vec,i_vec,l_vec,m_vec)" \ +".\[0-9\]+ = .6, 63." "call inferior function with vectors (1) " + +# Let's call the function again with dummy arguments. This is to clean +# up the contents of the ev registers before the next call. +gdb_test "p vec_func(a_vec_d,b_vec_d,c_vec_d,d_vec_d,e_vec_d,f_vec_d,g_vec_d,h_vec_d,i_vec_d,l_vec_d,m_vec_d)" \ +".\[0-9\]+ = .1, 1." "call inferior function with vectors (2) " + +# Let's step into the function, to see if the args are printed correctly. +gdb_test "step" \ + $pattern1 \ + "step into vec_func" + +set pattern2 $pattern +append pattern2 " at.*e500-abi.c.*main.*res_vec = vec_func .a_vec,.*goes in r3.*Value returned is.*= .6, 63." + +# Let's see if the result is returned correctly. +gdb_test "finish" \ + "Run till exit from .0.*$pattern2" \ + "vector value returned correctly" + diff --git a/gdb/testsuite/gdb.arch/e500-regs.c b/gdb/testsuite/gdb.arch/e500-regs.c new file mode 100644 index 00000000000..bae5f3955b4 --- /dev/null +++ b/gdb/testsuite/gdb.arch/e500-regs.c @@ -0,0 +1,38 @@ +#include +#include + +#define vector __attribute__((vector_size(8))) + + +vector int +vector_fun (vector int a, vector int b) +{ + vector int c; + a = (vector int) __ev_create_s32 (2, 2); + b = (vector int) __ev_create_s32 (3, 3); + + c = __ev_and (a, b); + return c; +} + +int +main () +{ + vector int y; + vector int x; + vector int z; + int a; + + /* This line may look unnecessary but we do need it, because we want to + have a line to do a next over (so that gdb refetches the registers) + and we don't want the code to change any vector registers. + The splat operations below modify the VRs, + so we don't want to execute them yet. */ + a = 9; + x = (vector int) __ev_create_s32 (-2, -2); + y = (vector int) __ev_create_s32 (1, 1); + + z = vector_fun (x, y); + + return 0; +} diff --git a/gdb/testsuite/gdb.arch/e500-regs.exp b/gdb/testsuite/gdb.arch/e500-regs.exp new file mode 100644 index 00000000000..9224704b219 --- /dev/null +++ b/gdb/testsuite/gdb.arch/e500-regs.exp @@ -0,0 +1,229 @@ +# Copyright 2003 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu +# + +# Tests for Powerpc E500 register setting and fetching + +if $tracelevel then { + strace $tracelevel +} + +# +# Test the use of registers, especially E500 registers, for Powerpc. +# This file uses e500-regs.c for input. +# + +set prms_id 0 +set bug_id 0 + +if ![istarget "powerpc-*eabispe"] then { + verbose "Skipping e500 register tests." + return +} + +set testfile "e500-regs" +set binfile ${objdir}/${subdir}/${testfile} +set src1 ${srcdir}/${subdir}/${testfile}.c + +if { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +# +# Run to `main' where we begin our tests. +# + +if ![runto_main] then { + gdb_suppress_tests +} + +# set all the registers integer portions to 1 +for {set i 0} {$i < 32} {incr i 1} { + for {set j 0} {$j < 2} {incr j 1} { + gdb_test "set \$ev$i.v2_int32\[$j\] = 1" "" "set reg ev$i.v4si.f\[$j\]" + } +} + +# Now execute some target code, so that GDB's register cache is flushed. + +#gdb_test "next" "" "" + +send_gdb "show endian\n" +gdb_expect { + -re "(The target endianness is set automatically .currently )(big|little)( endian.*)$gdb_prompt $" { + pass "endianness" + set endianness $expect_out(2,string) + } + -re ".*$gdb_prompt $" { + fail "couldn't get endianness" + } + timeout { fail "(timeout) endianness" } +} + +# And then read the E500 registers back, to see that +# a) the register write above worked, and +# b) the register read (below) also works. + +if {$endianness == "big"} { +set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x0, 0x1, 0x0, 0x1., v8_int8 = .0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1.." +} else { +set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x1, 0x0, 0x1, 0x0., v8_int8 = .0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0.." +} + +for {set i 0} {$i < 32} {incr i 1} { + gdb_test "info reg ev$i" "ev$i.*$vector_register" "info reg ev$i" +} + +# Test wether the GPRs are updated accordingly. (GPRs are just the lower +# 32 bits of the EV registers.) + +set general_register "0x1\[ \t\]+1" + +for {set i 0} {$i < 32} {incr i 1} { + gdb_test "info reg r$i" "r$i.*$general_register" "info reg r$i" +} + +# Now redo the same tests, but using the print command. +# Note: in LE case, the char array is printed WITHOUT the last character. +# Gdb treats the terminating null char in the array like the terminating +# null char in a string and doesn't print it. This is not a failure, but +# the way gdb works. + +if {$endianness == "big"} { + set decimal_vector ".uint64 = 4294967297, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .0, 1, 0, 1., v8_int8 = ..000.000.000.001.000.000.000.001.." +} else { + set decimal_vector ".uint64 = 0x0000000100000001, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .1, 0, 1, 0., v8_int8 = ..001.000.000.000.001.000.000.000.001.000.000.000.001.000.000.." +} + +for {set i 0} {$i < 32} {incr i 1} { + gdb_test "print \$ev$i" ".* = $decimal_vector" "print ev$i" +} + +for {set i 0} {$i < 32} {incr i 1} { + set pattern$i ".*ev$i.*" + append pattern$i $vector_register +} + +send_gdb "info vector\n" +gdb_expect_list "info vector" ".*$gdb_prompt $" { +[$pattern0] +[$pattern1] +[$pattern2] +[$pattern3] +[$pattern4] +[$pattern5] +[$pattern6] +[$pattern7] +[$pattern8] +[$pattern9] +[$pattern10] +[$pattern11] +[$pattern12] +[$pattern13] +[$pattern14] +[$pattern15] +[$pattern16] +[$pattern17] +[$pattern18] +[$pattern19] +[$pattern20] +[$pattern21] +[$pattern22] +[$pattern23] +[$pattern24] +[$pattern25] +[$pattern26] +[$pattern27] +[$pattern28] +[$pattern29] +[$pattern30] +[$pattern31] +} + +# We must restart everything, because we have set important registers to +# some unusual values. + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} +if ![runto_main] then { + gdb_suppress_tests +} + +gdb_test "break vector_fun" \ + "Breakpoint 2 at.*e500-regs.c, line \[0-9\]+\\." \ + "Set breakpoint at vector_fun" + +# Actually it is nuch easier to see these results printed in hex. +# gdb_test "set output-radix 16" \ +# "Output radix now set to decimal 16, hex 10, octal 20." \ +# "Set output radix to hex" + +gdb_test "continue" \ + "Breakpoint 2, vector_fun .a=.-2, -2., b=.1, 1.*e500-regs.c.*ev_create_s32 .2, 2.;" \ + "continue to vector_fun" + +# Do a next over the assignment to vector 'a'. +gdb_test "next" ".*b = \\(vector int\\) __ev_create_s32 \\(3, 3\\);" \ + "next (1)" + +# Do a next over the assignment to vector 'b'. +gdb_test "next" "c = __ev_and \\(a, b\\);" \ + "next (2)" + +# Now 'a' should be '0x02020202...' and 'b' should be '0x03030303...' +gdb_test "print/x a" \ + ".*= .0x2, 0x2." \ + "print vector parameter a" + +gdb_test "print/x b" \ + ".*= .0x3, 0x3." \ + "print vector parameter b" + +# If we do an 'up' now, and print 'x' and 'y' we should see the values they +# have in main, not the values they have in vector_fun. +gdb_test "up" ".1.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);" \ + "up to main" + +gdb_test "print x" \ + ".*= .-2, -2." \ + "print vector x" + +gdb_test "print y" \ + ".*= .1, 1." \ + "print vector y" + +# now go back to vector_func and do a finish, to see if we can print the return +# value correctly. + +gdb_test "down" \ + ".0 vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*c = __ev_and \\(a, b\\);" \ + "down to vector_fun" + +gdb_test "finish" \ + "Run till exit from .0 vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);.*Value returned is.*= .2, 2." \ + "finish returned correct value" + + + diff --git a/gdb/testsuite/gdb.arch/e500-regs.exp~ b/gdb/testsuite/gdb.arch/e500-regs.exp~ new file mode 100644 index 00000000000..97cb52cb8b1 --- /dev/null +++ b/gdb/testsuite/gdb.arch/e500-regs.exp~ @@ -0,0 +1,229 @@ +# Copyright 2003 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu +# + +# Tests for Powerpc E500 register setting and fetching + +if $tracelevel then { + strace $tracelevel +} + +# +# Test the use of registers, especially E500 registers, for Powerpc. +# This file uses e500-regs.c for input. +# + +set prms_id 0 +set bug_id 0 + +if ![istarget "powerpc-*eabispe"] then { + verbose "Skipping e500 register tests." + return +} + +set testfile "e500-regs" +set binfile ${objdir}/${subdir}/${testfile} +set src1 ${srcdir}/${subdir}/${testfile}.c + +if { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +# +# Run to `main' where we begin our tests. +# + +if ![runto_main] then { + gdb_suppress_tests +} + +# set all the registers integer portions to 1 +for {set i 0} {$i < 32} {incr i 1} { + for {set j 0} {$j < 2} {incr j 1} { + gdb_test "set \$ev$i.v2_int32\[$j\] = 1" "" "set reg ev$i.v4si.f\[$j\]" + } +} + +# Now execute some target code, so that GDB's register cache is flushed. + +#gdb_test "next" "" "" + +send_gdb "show endian\n" +gdb_expect { + -re "(The target endianness is set automatically .currently )(big|little)( endian.*)$gdb_prompt $" { + pass "endianness" + set endianness $expect_out(2,string) + } + -re ".*$gdb_prompt $" { + fail "couldn't get endianness" + } + timeout { fail "(timeout) endianness" } +} + +# And then read the E500 registers back, to see that +# a) the register write above worked, and +# b) the register read (below) also works. + +if {$endianness == "big"} { +set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x0, 0x1, 0x0, 0x1., v8_int8 = .0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1.." +} else { +set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x1, 0x0, 0x1, 0x0., v8_int8 = .0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0.." +} + +for {set i 0} {$i < 32} {incr i 1} { + gdb_test "info reg ev$i" "ev$i.*$vector_register" "info reg ev$i" +} + +# Test wether the GPRs are updated accordingly. (GPRs are just the lower +# 32 bits of the EV registers.) + +set general_register "0x1\[ \t\]+1" + +for {set i 0} {$i < 32} {incr i 1} { + gdb_test "info reg r$i" "r$i.*$general_register" "info reg r$i" +} + +# Now redo the same tests, but using the print command. +# Note: in LE case, the char array is printed WITHOUT the last character. +# Gdb treats the terminating null char in the array like the terminating +# null char in a string and doesn't print it. This is not a failure, but +# the way gdb works. + +if {$endianness == "big"} { + set decimal_vector ".uint64 = 4294967297, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .0, 1, 0, 1., v8_int8 = ..0.0.0.001.0.0.0.001.." +} else { + set decimal_vector ".uint64 = 0x0000000100000001, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .1, 0, 1, 0., v8_int8 = ..001.0.0.0.001.0.0.0.001.0.0.0.001.0.0.." +} + +for {set i 0} {$i < 32} {incr i 1} { + gdb_test "print \$ev$i" ".* = $decimal_vector" "print ev$i" +} + +for {set i 0} {$i < 32} {incr i 1} { + set pattern$i ".*ev$i.*" + append pattern$i $vector_register +} + +send_gdb "info powerpc vector\n" +gdb_expect_list "info powerpc vector" ".*$gdb_prompt $" { +[$pattern0] +[$pattern1] +[$pattern2] +[$pattern3] +[$pattern4] +[$pattern5] +[$pattern6] +[$pattern7] +[$pattern8] +[$pattern9] +[$pattern10] +[$pattern11] +[$pattern12] +[$pattern13] +[$pattern14] +[$pattern15] +[$pattern16] +[$pattern17] +[$pattern18] +[$pattern19] +[$pattern20] +[$pattern21] +[$pattern22] +[$pattern23] +[$pattern24] +[$pattern25] +[$pattern26] +[$pattern27] +[$pattern28] +[$pattern29] +[$pattern30] +[$pattern31] +} + +# We must restart everything, because we have set important registers to +# some unusual values. + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} +if ![runto_main] then { + gdb_suppress_tests +} + +gdb_test "break vector_fun" \ + "Breakpoint 2 at.*e500-regs.c, line \[0-9\]+\\." \ + "Set breakpoint at vector_fun" + +# Actually it is nuch easier to see these results printed in hex. +# gdb_test "set output-radix 16" \ +# "Output radix now set to decimal 16, hex 10, octal 20." \ +# "Set output radix to hex" + +gdb_test "continue" \ + "Breakpoint 2, vector_fun .a=.-2, -2., b=.1, 1.*e500-regs.c.*ev_create_s32 .2, 2.;" \ + "continue to vector_fun" + +# Do a next over the assignment to vector 'a'. +gdb_test "next" ".*b = \\(vector int\\) __ev_create_s32 \\(3, 3\\);" \ + "next (1)" + +# Do a next over the assignment to vector 'b'. +gdb_test "next" "c = __ev_and \\(a, b\\);" \ + "next (2)" + +# Now 'a' should be '0x02020202...' and 'b' should be '0x03030303...' +gdb_test "print/x a" \ + ".*= .0x2, 0x2." \ + "print vector parameter a" + +gdb_test "print/x b" \ + ".*= .0x3, 0x3." \ + "print vector parameter b" + +# If we do an 'up' now, and print 'x' and 'y' we should see the values they +# have in main, not the values they have in vector_fun. +gdb_test "up" ".1.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);" \ + "up to main" + +gdb_test "print x" \ + ".*= .-2, -2." \ + "print vector x" + +gdb_test "print y" \ + ".*= .1, 1." \ + "print vector y" + +# now go back to vector_func and do a finish, to see if we can print the return +# value correctly. + +gdb_test "down" \ + ".0 vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*c = __ev_and \\(a, b\\);" \ + "down to vector_fun" + +gdb_test "finish" \ + "Run till exit from .0 vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);.*Value returned is.*= .2, 2." \ + "finish returned correct value" + + +