From: Matt Weber Date: Thu, 16 Aug 2018 18:01:04 +0000 (-0500) Subject: configs/freescale_t2080_qds_rdb_defconfig: new board X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=bfb5a7a3c1b9fc68ce77fa67fefbda17444598c7;p=buildroot.git configs/freescale_t2080_qds_rdb_defconfig: new board The board is setup to track upstream Linux as the official vendor support was complete(depricated) at 4.1 via NXP SDKs. The target does not build uboot and assumes the user still uses the NXP suggested prebuilts in the SDK2.0 (last release for PowerPC). If a uboot is required, the source for SDK2.0 can be found in the following repo. http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703 Signed-off-by: Matthew Weber [Arnout: update .gitlab-ci.yml] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 424e7e43af..e9869be784 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -148,6 +148,7 @@ freescale_imx8mqevk_defconfig: { extends: .defconfig } freescale_imx8qxpmek_defconfig: { extends: .defconfig } freescale_p1025twr_defconfig: { extends: .defconfig } freescale_t1040d4rdb_defconfig: { extends: .defconfig } +freescale_t2080_qds_rdb_defconfig: { extends: .defconfig } friendlyarm_nanopi_a64_defconfig: { extends: .defconfig } friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig } galileo_defconfig: { extends: .defconfig } diff --git a/configs/freescale_t2080_qds_rdb_defconfig b/configs/freescale_t2080_qds_rdb_defconfig new file mode 100644 index 0000000000..3d03c32f7e --- /dev/null +++ b/configs/freescale_t2080_qds_rdb_defconfig @@ -0,0 +1,25 @@ +# Architecture +BR2_powerpc64=y +BR2_powerpc_e6500=y + +# Linux headers same as kernel +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y + +# Serial port config +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14" +BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_GZIP=y +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y +# BR2_TARGET_ROOTFS_TAR is not set +